Moniliella aeria sp. nov., a novel yeast isolated from the air of a Wuliangye baijiu-making workshop.

During an investigation of the diversity of airborne yeasts in a famous Chinese baijiu fermentation workshop, two yeast strains were isolated from the air of the Wuliangye 501# baijiu-making workshop in Yibin, Sichuan Province, PR China and subjected to taxonomic analysis. The results of phylogenetic analysis of two regions of the rRNA gene cluster, the D1/D2 domains of the large subunit (LSU) rRNA gene and the internal transcribed spacer (ITS) region, indicated that these strains represented a novel species of the genus Moniliella distinct from closely related species. The similarity between the novel species and the most closely related known species, Moniliella dehoogii, was 94.1 % for the D1/D2 LSU rRNA gene (30 substitutions and 12 indels out of 556 bp) and 95.6 % for the ITS region (9 substitutions and 6 indels out of 475 bp). In contrast with M. dehoogii, this novel species was able to assimilate d-ribose, l-arabinose, d-arabinose, cellobiose, d-glucono-1,5-lactone, dl-lactate, citrate, 1,2-propanediol, 2,3-butanediol and ethanol but was unable to ferment raffinose or assimilate inulin. On the basis of the results of phylogenetic analysis and the physiological characteristics, these investigated strains represent a novel species of the genus Moniliella, for which the name Moniliella aeria sp. nov. is proposed. Its holotype is CGMCC 20235T, and the MycoBank number is MB840188.

Tandem Solid-Phase Extraction Columns for Simultaneous Aroma Extraction and Fractionation of Wuliangye and Other Baijiu.

Wuliangye baijiu is one of the most famous baijiu in China, with a rich, harmonic aroma profile highly appreciated by consumers. Thousands of volatiles have been identified for the unique aroma profile. Among them, fatty acid esters have been identified as the main contributors to the aroma profile. In addition, many non-ester minor compounds, many of which are more polar than the esters, have been identified to contribute to the characteristic aroma unique to Wuliangye baijiu. The analysis of these minor compounds has been challenging due to the dominance of esters in the sample. Thus, it is desirable to fractionate the aroma extract into subgroups based on functional group or polarity to simplify the analysis. This study attempts a new approach to achieve simultaneous volatile extraction and fractionation using tandem LiChrolut EN and silica gel solid-phase extraction (SPE) columns. A baijiu sample (10 mL, diluted in 40 mL of water) was first passed through the LiChrolut EN (1.0 g) column. The loaded LiChrolut EN column was then dried with air and coupled with a silica gel (5.0 g) SPE column with anhydrous Na2SO4 (10.0 g) in between. The volatile compounds were eluted from the LiChrolut EN column and simultaneously fractionated on the silica gel column based on polarity. The simultaneous extraction and fractionation technique enabled the fractionations of all fatty acid esters into less polar fractions. Fatty acids, alcohols, pyrazines, furans, phenols, hydroxy esters, and other polar compounds were collected in more polar fractions. This technique was used to study the volatile compounds in Wuliangye, Moutai, and Fengjiu baijiu. In addition to fatty acid esters, many minor polar compounds, including 2,6-dimethylpyrazine, 2-ethyl-6-methylpyrazine, 2-ethyl-3,5-dimethylpyrazine, p-cresol, and 2-acetylpyrrole, were unequivocally identified in the samples. The procedure is fast and straightforward, with low solvent consumption.

Continuous thermophilic composting of distilled grain waste improved organic matter stability and succession of bacterial community.

Continuous thermophilic composting (CTC) is potentially helpful in shortening the composting cycle. However, its universal effectiveness and the microbiological mechanisms involved are unclear. Here, the physicochemical properties and bacterial community dynamics during composting of distilled grain waste in conventional and CTC models were compared. CTC accelerated the organic matter degradation rate (0.2 vs. 0.1 d-1) and shortened the composting cycle (24 vs. 65 d), mainly driven by the synergism of bacterial genera. Microbial analysis revealed that the abundance of Firmicutes was remarkably improved compared to that in conventional composting, and Firmicutes became the primary bacterial phylum (relative abundance >70 %) during the entire CTC process. Moreover, correlation analysis demonstrated that bacterial composition had a remarkable effect on the seed germination index. Therefore, controlling the composting process under continuous thermophilic conditions is beneficial for enhancing composting efficiency and strengthening the cooperation between bacterial genera.

Fabrication and Characterization of Carbon Nanotube Filled PDMS Hybrid Membranes for Enhanced Ethanol Recovery.

Ethanol separation via the pervaporation process has shown growing application potential in solvent recovery and the bioethanol industry. In the continuous pervaporation process, polymeric membranes such as hydrophobic polydimethylsiloxane (PDMS) have been developed to enrich/separate ethanol from dilute aqueous solutions. However, its practical application remains largely limited due to the relatively low separation efficiency, especially in selectivity. In view of this, hydrophobic carbon nanotube (CNT) filled PDMS mixed matrix membranes (MMMs) aimed at high-efficiency ethanol recovery were fabricated in this work. The filler K-MWCNTs was prepared by functionalizing MWCNT-NH2 with epoxy-containing silane coupling agent (KH560) to improve the affinity between fillers and PDMS matrix. With K-MWCNT loading increased from 1 wt % to 10 wt %, membranes showed higher surface roughness and water contact angle was improved from 115° to 130°. The swelling degree of K-MWCNT/PDMS MMMs (2 wt %) in water were also reduced from 10 wt % to 2.5 wt %. Pervaporation performance for K-MWCNT/PDMS MMMs under varied feed concentrations and temperatures were evaluated. The results supported that the K-MWCNT/PDMS MMMs at 2 wt % K-MWCNT loading showed the optimum separation performance (compared with pure PDMS membranes), with the separation factor improved from 9.1 to 10.4, and the permeate flux increased by 50% (40-60 °C, at 6 wt % feed ethanol concentration). This work provides a promising method for preparing a PDMS composite with both high permeate flux and selectivity, which showed great potential for bioethanol production and alcohol separation in industry.

The Influence of Rehydration on the Properties of Portland Cement-Based Materials with Low Water/Binder Ratios: A Review of Existing Research.

Cement-based materials with a low water/binder ratio contain a high number of unhydrated cement particles, which implies that a rehydration reaction occurs when they encounter water again. This study aimed to explore how rehydration influences the macroscopic and microscopic properties of cement-based materials. The key study findings included that rehydration could still occur in cement-based materials after one year of hydration, and that the capacity for rehydration-induced repair or damage to cement-based materials depended on whether their internal pores could accommodate rehydration products. During rehydration, the compressive strength and porosity of the specimens were found to first increase and then decrease. The capillary water absorption coefficient decreased continuously over a rehydration period of 120 days. As the water/binder ratio rose, the rehydration rate first increased and then decreased. First, the influence of temperature on the rehydration rate was more noticeable when the water/binder ratio was below 0.3; second, whereas adding large amounts of fly ash and silica fume did not prove to be conducive to repairing and enhancing cement-based materials undergoing rehydration, adding slag and small quantities of silica fume, or alternatively compounding small amounts of silica fume and fly ash could improve the repair and enhancement effects of rehydration.

Effect of GO on the Structure and Properties of PEG/Biochar Phase Change Composites.

In recent years, phase change materials (PCMs) have been widely used in waste heat utilization, buildings, and solar and wind energy, but with a huge limitation from the low thermal conductivity, photothermal conversion efficiency, and low latent heat. Organic PCMs are eyecatching because of its high latent heat storage capability and reliability, but they still suffer from a lack of photothermal conversion and sharp stability. Here, we prepared sharp-stable PCMs by establishing a carbon material frame system consisting of graphene oxide (GO) and biochar. In particular, surfactants (CTAB, KH-560 and KH-570) were employed to improve the dispersity of GO in PEG. The differential scanning calorimetry results shows that the latent heat of PEG modified by CTAB grafted GO (PGO-CTAB) was the highest (191.36 J/g) and increased by 18.31% compared to that of pure PEG (161.74 J/g). After encapsulation of PGO-CTAB in biochar, the obtained composite PCM with the amount of biochar and PGO-CTAB in weight ratio 4:6 (PGO-CTAB/CS6(6)) possesses relatively high latent heat 106.51 J/g with good leak resistance and thermal stability, and with obviously enhanced thermal conductivity (0.337 W/(m·K)) and photothermal conversion efficiency (77.43%), which were higher than that of PEG6000 (0.325 W/(m·K), 44.63%). The enhancement mechanism of heat transfer and photothermal conversion on the composite PCM is discussed.

Research on the Relation between Slump Flow and Yield Stress of Ultra-High Performance Concrete Mixtures.

The relation between slump flow and yield stress of ultra-high performance concrete (UHPC) mixtures was studied with theoretical analysis and experimentation. The relational expression between slump flow and yield stress of UHPC mixtures was built and then verified with a rheological test. The results showed that the prediction model, as a function of cone geometry of dimensionless slump flow and dimensionless yield stress of the UHPC mixtures, was constructed based on Tresca criteria, considering the geometric relation of morphological characterization parameters before and after slump of the UHPC mixtures. The rationality and applicability of the dimensionless prediction model was verified with a rheological test and a slump test of UHPC mixtures with different dosages of polycarboxylate superplasticizer. With increase in polycarboxylate superplasticizer dosage, yield stress of the two series of UHPC mixtures (large/small binding material consumption) gradually decreased, leading to a gradual increase in slump flow. Based on the prediction model of dimensionless slump flow and dimensionless yield stress, the relational expression between slump flow and yield stress of the UHPC mixtures was built. The comparison result showed that the calculated data was consistent with the experimental data, which provided a new method for predicting yield stress of UHPC mixtures with a slump test.

Environmental factors and interactions among microorganisms drive microbial community succession during fermentation of Nongxiangxing daqu.

Nongxiangxing daqu (daqu), which is produced by the open fermentation of wheat, is the fermentation starter of baijiu. This work reports the occurrence and driving factors of microbial community succession (MCS), which determines daqu quality, during daqu fermentation. The co-occurrence networks of the 2 stages of the MCS showed that module 2 of stage P1 contained Mucoromycota and Actinobacteriota and was affected by temperature, humidity, CO2, and moisture; module 8 of stage P2 contained Mucoromycota and Saccharomycetes and was influenced by acidity and moisture. Twenty-two genera were thebiomarkers of the MCS. The MCS was driven by temperature, humidity, CO2, O2, acidity,moisture and interactions between the biomarkes and Lactobacillales, Saccharomycetales, and Acetobacter. The main driving factors of the bacterial community succession were acidity, moisture, and temperature, and that of the fungal community succession was moisture. These results guide the control of MCS during daqu fermentation.

The fluorescence mechanism of carbon dots based on the separation and identification of small molecular fluorophores.

Carbon dots (CDs) have attracted much attention in theoretical researches and their practical applications due to their excellent optical properties, and many researchers discovered that flurophores play a very important role in synthesis process of CDs and the luminescence of prepared CDs. In this study, two CDs were pyrolysis with citric acid, N-acetyl-l-cysteine and glutathione derivatives as carbon sources. Four intermediate small molecules were separated from the prepared CDs through ultrafiltration and chromatography, and their chemical structures were determined. The formation process of CDs was monitored through identified small molecule intermediates and HPLC. It is speculated that the two CDs have the same formation pathway, including TPA (5-oxo-2,3-dihydro-5H-[1,3]thiazolo[3,2-a]pyridine-3,7-dicarboxylic acid) synthesis, fluorophore polymerization, carbon chain extension, and carbonization. It was also discovered that these two CDs have the same fluorescence properties, thiazolopyridone structure, and nitrogen-sulfur co-doped functional groups are important reasons for the mixed excitation dependence of CDs. This study would provide valuable theoretical basis for the studies on preparation of excellent CDs, raw material selection, and CDs formation mechanism.

Synthesis, characterization, and methylene blue adsorption of multiple-responsive hydrogels loaded with Huangshui polysaccharides, polyvinyl alcohol, and sodium carboxyl methyl cellulose.

Huangshui (HS), a typical by-product of traditional Chinese Baijiu, has attracted more and more attention since its rich resources of polysaccharides. However, there's little information on hydrogels preparation by Huangshui polysaccharides (HSPs). A series of novel HSP-loaded hydrogels were synthesized using crude HSP (cHSP), polyvinyl alcohol (PVA), sodium carboxyl methyl cellulose (CMC), and in situ incorporation of Fe3O4 for methylene blue (MB) adsorption for the first time. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM) and texture tests indicated the paramagnetic hydrogels with porous structure were formed via physical crosslinking, and cHSP had no effect on hydrogel texture. Notably, cHSP enhanced the swelling capacity and MB adsorption ability of the hydrogels, and the corresponding maximum value was 38.67 g/g and 71.07 mg/g, respectively, when the additive amount of cHSP to the hydrogels was 2 % at 25°Ð¡. In addition, the swelling kinetics of hydrogels followed the Schott's second-order kinetics model, while MB adsorption fitted well with the Freundlich isotherm and pseudo-second-order model. Furthermore, intraparticle and film diffusion-controlled MB adsorption process. Significantly, cHSP amount could counteract the negative influence of high temperature on MB adsorption, and the prepared hydrogels could be reusable, demonstrating cHSP effectively promoted the properties of hydrogels and had potential application in MB removal. The adsorption mechanism of MB onto the hydrogels involved ion-exchange, hydrogen bonding, electrostatic interaction, and chemical reaction according to the above results together with the analysis by X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray (EDX) characterizations, thermodynamic, etc.

Structure elucidation and intestinal barrier protection of an α-D-glucan in Huangshui.

WLY-0, as an α-D-glucan with a molecular weight (Mw) of 11.12 kDa, was successfully isolated and purified from Huangshui (HS). The results of methylation and NMR indicated that the mainchain of WLY-0 was (1 â†’ 4)-α-D-glucan, with side chains linking at O-6. Meanwhile, the surface morphology characterization showed that WLY-0 had an irregular flake-like morphology with a rough and uneven surface and varies in sizes from nanometers to microns. Furthermore, WLY-0 relieved the increased paracellular permeability of FD4 and decreased TEER challenged by LPS, meanwhile inhibited the production of pro-inflammatory cytokines (TNF-α, IL-6, and IL-1ß) and up-regulated the expression of TJ protein (Occludin, Claudin-1, ZO-1, and JAM-A) in Caco-2 cells, so to improve the intestinal barrier function. Our findings about the structural characteristics and biological activities of WLY-0 provided a scientific foundation for the utilization of HS as a potent source of an effective adjuvant in intestinal barrier injury treatment.

Bacterial Community Structure and Metabolic Function Succession During the Composting of Distilled Grain Waste.

Distilled grain waste (DGW) can be converted to organic fertilizer via aerobic composting process without inoculating exogenous microorganisms. To illustrate the material conversion mechanism, this study investigated the dynamic changes of bacterial community structure and metabolic function involved in DGW composting. Results showed that a significant increase in microbial community alpha diversity was observed during DGW composting. Moreover, unique community structures occurred at each composting stage. The dominant phyla were Firmicutes, Proteobacteria, Actinobacteriota, Bacteroidota, Myxococcota, and Chloroflexi, whose abundance varied according to different composting stages. Keystone microbes can be selected as biomarkers for each stage, and Microbispora, Chryseolinea, Steroidobacter, Truepera, and Luteimonas indicating compost maturity. Co-occurrence network analysis revealed a significant relationship between keystone microbes and environmental factors. The carbohydrate and amino acid metabolism were confirmed as the primary metabolic pathways by metabolic function profiles. Furthermore, nitrogen metabolism pathway analysis indicated that denitrification and NH3 volatilization induced higher nitrogen loss during DGW composting. This study can provide new understanding of the microbiota for organic matter and nitrogen conversion in the composting process of DGW.

Effect of distillery sewage sludge addition on performance and bacterial community dynamics during distilled grain waste composting.

This study evaluated the dynamics of physicochemical characteristics and bacterial communities during the co-composting of distilled grain waste (DGW) and distillery sewage sludge (SS), with DGW mono-composting as a control. Results showed that co-composting with SS significantly improved DGW degradation efficiency (61.38% vs. 54.13%) and end-product quality (seed germination index: 129.82% vs. 113.61%; N + P2O5 + K2O: 9.08% vs. 5.28%), compared to DGW mono-composting. Microbial community analysis revealed that co-composting accelerated the bacterial community succession rate and enhanced the abundance of the phyla Proteobacteria, Firmicutes, Chloroflexi, and Deinococcota by 45.86%, 4.38%, 37.49%, and 15.29%, respectively. Network analysis showed that DGW-SS co-composting altered the interactions among the bacterial genera and improved bacterial community stability. Spearman correlation analysis indicated that the correlation between bacterial genera and environmental factors was more significant in DGW-SS co-composting. Therefore, co-composting of DGW and SS is a suitable strategy for the treatment of solid byproducts from spirit distilleries.

Enhanced thermotolerance for ethanol fermentation of Saccharomyces cerevisiae strain by overexpression of the gene coding for trehalose-6-phosphate synthase.

The effect of overexpression of the trehalose-6-phosphate (T6P) synthase gene (TPS1) on ethanol fermentation of Saccharomyces cerevisiae has been studied at 30 and 38°C. The activity of T6P synthase and the accumulation of trehalose during ethanol fermentation were significantly improved by overexpression of TPS1, and especially at 38°C. Ethanol produced by transformants with and without TPS1 gene overexpression at 38°C was approx. 60 and 37 g/l, respectively. The fermentation efficiency of transformants with TPS1 gene overexpression at 38°C was similar to that at 30°C. The critical growth temperature was increased from 36 to 42°C by TPS1 gene overexpression. These results indicated that overexpression of the TPS1 gene had a beneficial effect on the fermentation capacity of the title yeast strain at high temperatures.

Brittleness of Concrete under Different Curing Conditions.

In order to shorten construction periods, concrete is often cured using steam and is loaded at an early age. This changes the performance and even the durability of the concrete compared to concrete that has been cured under normal conditions. Thus, the pattern and the mechanism of concrete performance change under different curing conditions, and loading ages are of great significance. The development of brittleness under different curing conditions and loading ages was studied. The evaluation methods that were used to determine concrete brittleness were expounded. Steam, standard, and natural curing conditions were carried out on single-side notched concrete beams as well as on a concrete prism and cubic blocks. The compressive strength and splitting tensile strength of the concrete blocks along with the fracture performance of the concrete beams were tested after 3, 7, 28, and 90 days. The steam curing condition significantly improved the strength of concrete before 28 days had passed, and the standard curing condition improved the strength of concrete after 28 days. Based on the experimental fracture parameters, a two-parameter fracture model was applied to study the development of fracture toughness KICS, critical crack tip opening displacement CTODc, and critical strain energy release rate GICS with hydration age under different curing conditions. With respect to long-term performance, the standard curing condition was better at resisting concrete crack propagations than the steam curing condition was. The characteristic length lch and the material length Q under the three curing conditions and the long-term development of brittleness in the concrete indicated that steam curing increased the concrete brittleness. Considering the effects of the curing condition and the loading age, a time-dependent concrete fracture toughness model was established, and the predicted value of the model was verified against the measured value. The results indicated that the model was able to accurately predict the fracture toughness with an error rate of less than 16%.

Continuous ethanol fermentation from non-sulfuric acid-washed molasses using traditional stirred tank reactors and the flocculating yeast strain KF-7.

Waste molasses is one of the most important feedstock for ethanol production in Brazil as well as in many Southeast Asian countries, including China. Sulfuric acid pretreatment is employed in most ethanol distilleries in China to control bacterial contamination, which results in difficulties in the treatment of wastewater containing high levels of sulfate ions. In this study, a high efficiency, non-sterilized, continuous ethanol fermentation process without sulfuric acid pretreatment was developed using the flocculating yeast strain KF-7 and the widely utilized, traditional, stirred tank reactors. An alternative molasses medium feeding method, which differs from traditional methods, is proposed that effectively controls bacterial contamination. Separate feeding of 1.2-fold diluted molasses and tap water into the reactor proved to be effective against bacterial contamination during long-term continuous fermentation. By feeding yeast cells with high metabolic activity to the second reactor, a two-stage continuous fermentation process that yielded a high ethanol concentration of 80 g/l as well as high ethanol productivity of 6.6 g/l/h was successfully operated for more than one month. This fermentation process can be applied to ethanol distilleries in which traditional tank reactors are used.

Production of fuel ethanol and methane from garbage by high-efficiency two-stage fermentation process.

A two-stage fermentation process, consisting of a simultaneous saccharification and fermentation (SSF) stage and a dry methane fermentation stage, was developed to utilize garbage for the production of fuel ethanol and methane. Garbage from families, canteens and concessionaires was used for the study. Saccharification method was studied and the results indicated that the liquefaction pretreatment and the combination of cellulase and glucoamylase was effective for polysaccharide hydrolysis of family garbage with a high content of holocellulose and that SSF was suitable for ethanol fermentation of garbage. Ethanol productivity could be markedly increased from 1.7 to 7.0 g/l/h by repeated-batch SSF of family garbage. A high ethanol productivity of 17.7 g/l/h was achieved when canteen garbage was used. The stillage after distillation was treated by dry methane fermentation and the results indicated that the stillage was almost fully digested and that about 850 ml of biogas was recovered from 1 g of volatile total solid (VTS). Approximately 85% of the energy of the garbage was converted to fuels, ethanol and methane by this process.