Regional synapse gain and loss accompany memory formation in larval zebrafish.

Defining the structural and functional changes in the nervous system underlying learning and memory represents a major challenge for modern neuroscience. Although changes in neuronal activity following memory formation have been studied [B. F. Grewe et al., Nature 543, 670-675 (2017); M. T. Rogan, U. V. Stäubli, J. E. LeDoux, Nature 390, 604-607 (1997)], the underlying structural changes at the synapse level remain poorly understood. Here, we capture synaptic changes in the midlarval zebrafish brain that occur during associative memory formation by imaging excitatory synapses labeled with recombinant probes using selective plane illumination microscopy. Imaging the same subjects before and after classical conditioning at single-synapse resolution provides an unbiased mapping of synaptic changes accompanying memory formation. In control animals and animals that failed to learn the task, there were no significant changes in the spatial patterns of synapses in the pallium, which contains the equivalent of the mammalian amygdala and is essential for associative learning in teleost fish [M. Portavella, J. P. Vargas, B. Torres, C. Salas, Brain Res. Bull 57, 397-399 (2002)]. In zebrafish that formed memories, we saw a dramatic increase in the number of synapses in the ventrolateral pallium, which contains neurons active during memory formation and retrieval. Concurrently, synapse loss predominated in the dorsomedial pallium. Surprisingly, we did not observe significant changes in the intensity of synaptic labeling, a proxy for synaptic strength, with memory formation in any region of the pallium. Our results suggest that memory formation due to classical conditioning is associated with reciprocal changes in synapse numbers in the pallium.

Macropinocytosis-mediated membrane recycling drives neural crest migration by delivering F-actin to the lamellipodium.

Individual cell migration requires front-to-back polarity manifested by lamellipodial extension. At present, it remains debated whether and how membrane motility mediates this cell morphological change. To gain insights into these processes, we perform live imaging and molecular perturbation of migrating chick neural crest cells in vivo. Our results reveal an endocytic loop formed by circular membrane flow and anterograde movement of lipid vesicles, resulting in cell polarization and locomotion. Rather than clathrin-mediated endocytosis, macropinosomes encapsulate F-actin in the cell body, forming vesicles that translocate via microtubules to deliver actin to the anterior. In addition to previously proposed local conversion of actin monomers to polymers, we demonstrate a surprising role for shuttling of F-actin across cells for lamellipodial expansion. Thus, the membrane and cytoskeleton act in concert in distinct subcellular compartments to drive forward cell migration.

Toward interpretability of machine learning methods for the classification of patients with major depressive disorder based on functional network measures.

We address the interpretability of the machine learning algorithm in the context of the relevant problem of discriminating between patients with major depressive disorder (MDD) and healthy controls using functional networks derived from resting-state functional magnetic resonance imaging data. We applied linear discriminant analysis (LDA) to the data from 35 MDD patients and 50 healthy controls to discriminate between the two groups utilizing functional networks' global measures as the features. We proposed the combined approach for feature selection based on statistical methods and the wrapper-type algorithm. This approach revealed that the groups are indistinguishable in the univariate feature space but become distinguishable in a three-dimensional feature space formed by the identified most important features: mean node strength, clustering coefficient, and the number of edges. LDA achieves the highest accuracy when considering the network with all connections or only the strongest ones. Our approach allowed us to analyze the separability of classes in the multidimensional feature space, which is critical for interpreting the results of machine learning models. We demonstrated that the parametric planes of the control and MDD groups rotate in the feature space with increasing the thresholding parameter and that their intersection increases with approaching the threshold of 0.45, for which classification accuracy is minimal. Overall, the combined approach for feature selection provides an effective and interpretable scenario for discriminating between MDD patients and healthy controls using measures of functional connectivity networks. This approach can be applied to other machine learning tasks to achieve high accuracy while ensuring the interpretability of the results.

Topology switching during window thresholding fMRI-based functional networks of patients with major depressive disorder: Consensus network approach.

We present a novel method for analyzing brain functional networks using functional magnetic resonance imaging data, which involves utilizing consensus networks. In this study, we compare our approach to a standard group-based method for patients diagnosed with major depressive disorder (MDD) and a healthy control group, taking into account different levels of connectivity. Our findings demonstrate that the consensus network approach uncovers distinct characteristics in network measures and degree distributions when considering connection strengths. In the healthy control group, as connection strengths increase, we observe a transition in the network topology from a combination of scale-free and random topologies to a small-world topology. Conversely, the MDD group exhibits uncertainty in weak connections, while strong connections display small-world properties. In contrast, the group-based approach does not exhibit significant differences in behavior between the two groups. However, it does indicate a transition in topology from a scale-free-like structure to a combination of small-world and scale-free topologies. The use of the consensus network approach also holds immense potential for the classification of MDD patients, as it unveils substantial distinctions between the two groups.

Magnetic structure and internal field nuclear magnetic resonance of cobalt nanowires.

The magnetic properties of cobalt metal nanowires grown by electrodeposition in porous membranes depend largely on the synthesis conditions. Here, we focus on the role of electrolyte additives on the magnetic anisotropy of the electrodeposited nanowires. Through magnetometry and internal field nuclear magnetic resonance (IF NMR) studies, we compared both the magnetic and crystalline structures of 50 and 200 nm diameter Co nanowires synthesized in the presence or absence of organic additives. The spectral characteristics of IF NMR were compared structurally to X-ray diffraction patterns, and the anisotropy of the NMR enhancement factor in ferromagnetic multidomain structures to magnetometry results. While the magnetic behavior of the 50 nm nanowires was dominated, as expected, by shape anisotropy with magnetic domains oriented on axis, the analysis of the 200 nm proved to be more complex. 59Co IF NMR revealed that the determining difference between the samples electrodeposited in the presence or in absence of organic additives was not the dominant crystalline system (fcc or hcp) but the coherent domain sizes and boundaries. In the presence of organic additives, the cobalt crystal domains are smaller and with defective grain boundaries, as revealed by resonances below 210 MHz. This prevented the development in the Co hcp part of the sample of the strong magnetocrystalline anisotropy that was observed in the absence of organic additives. In the presence of organic additives, even in nanowires as wide as 200 nm, the magnetic behavior remained determined by the shape anisotropy with a positive effective magnetic anisotropy and strong anisotropy of the NMR enhancement factor.

Forecasting macroscopic dynamics in adaptive Kuramoto network using reservoir computing.

Forecasting a system's behavior is an essential task encountering the complex systems theory. Machine learning offers supervised algorithms, e.g., recurrent neural networks and reservoir computers that predict the behavior of model systems whose states consist of multidimensional time series. In real life, we often have limited information about the behavior of complex systems. The brightest example is the brain neural network described by the electroencephalogram. Forecasting the behavior of these systems is a more challenging task but provides a potential for real-life application. Here, we trained reservoir computer to predict the macroscopic signal produced by the network of phase oscillators. The Lyapunov analysis revealed the chaotic nature of the signal and reservoir computer failed to forecast it. Augmenting the feature space using Takkens' theorem improved the quality of forecasting. RC achieved the best prediction score when the number of signals coincided with the embedding dimension estimated via the nearest false neighbors method. We found that short-time prediction required a large number of features, while long-time prediction utilizes a limited number of features. These results refer to the bias-variance trade-off, an important concept in machine learning.

Extreme Enhancement of Carbon Hydrogasification via Mechanochemistry.

Carbon hydrogasification is the slowest reaction among all carbon-involved small-molecule transformations. Here, we demonstrate a mechanochemical method that results in both a faster reaction rate and a new synthesis route. The reaction rate was dramatically enhanced by up to 4 orders of magnitude compared to the traditional thermal method. Simultaneously, the reaction exhibited very high selectivity (99.8 % CH4 , versus 80 % under thermal conditions) with a cobalt catalyst. Our study demonstrated that this extreme increase in reaction rate originates from the continuous activation of reactive carbon species via mechanochemistry. The high selectivity is intimately related to the activation at low temperature, at which higher hydrocarbons are difficult to form. This work is expected to advance studies of carbon hydrogasification, and other solid-gas reactions.

A new collagen scaffold for the improvement of corneal biomechanical properties in a rabbit model.

Although collagen based materials are widely used in corneal tissue engineering with promising results. The usage of such materials for the improvement of corneal biomechanical properties is still unclear. In this study, we aimed to investigate a new Viscoll collagen-based membrane for the improvement of corneal biomechanical characteristics.The right eyes of 15 Chinchilla rabbits were implanted with the membrane via an intrastromal pocket, with the contralateral intact eyes as controls. At 7, 30, 90, and 180 days post-surgery, the rabbits underwent anterior segment optical coherence topography, clinical examination, and slit-lamp microscopy. Additionally, the corneal samples also underwent histological examination followed by the assessment of the biomechanical characteristics of four treated and non-treated corneas at 30, 90, and 180 days, including keratometry at 180 days, post operation. Data are presented as means ± confidence intervals with a 95% confidence level. All the operated corneas retained their transparency throughout the study. Implantation approximately doubled the central corneal thickness. Corneas became stronger by approximately 87% between 1 and 6 months after surgery (maximum fracture load, 13.3 ± 0.8 and 24.9 ± 1.4 N, respectively), and their elasticity increased by approximately 27% over the same time frame (maximum slope of the elastic region of the stress-strain curve, 11.5 ± 0.2 and 14.6 ± 1.4 N/mm respectively). We have thus proposed a new method to increase corneal thickness and strengthen the corneal tissues while preserving their transparency and demonstrated its safety and efficacy in a rabbit model over 6 months. This may be a suitable alternative to the existing corneal collagen crosslinking procedure.

Superparamagnetic behaviour of metallic Co nanoparticles according to variable temperature magnetic resonance.

Investigating the size distributions of Co nanoparticle ensembles is an important problem, which has no straightforward solution. In this work, we use the combination of 59Co internal field nuclear magnetic resonance (59Co IF NMR) and ferromagnetic resonance (FMR) spectroscopies on a metallic Co nanoparticle sample with a narrow Co nanoparticle size distribution due to encapsulation within the inner channels of carbon nanotubes. High-resolution transmission electron microscopy (TEM) images showed that the nanoparticles can be represented as prolate spheroids, with the majority of particles having an aspect ratio between 1 and 2. This observation has increased the accuracy of superparamagnetic blocking size calculations from Néel relaxation model by introducing the actual volume of the ellipsoids taken from the image processing. 59Co IF NMR and FMR experiments conducted under different temperatures allowed us to observe the thermal blocking of superparamagnetic particles in full accordance with the TEM particle volume distribution. This proved that these magnetic resonance techniques can be used jointly for characterization of Co nanoparticles in the bulk of the sample.

Thermodynamic mathematical model of the Kastanozem complex and new principles of sustainable semiarid protective silviculture management.

The Kastanozem complex in the dry steppe of southern Russia underlies an artificially-constructed forest strips. Deep ploughing to a depth of 45 cm was used to process the soil prior to planting. Between 20 and 40 cm depth, soil density was high, 1.57 t m-3. Soil hardness was also high, 440 psi. Soil aggregates greater than 5 cm in size were impermeable to tree roots. The content of such aggregates was high, comprising 35%. The number of tree roots with diameters greater than 0.5 cm that cross the soil profile was as low as 0.15 to 0.3 pcs cm-2. The soil matric potential signifying water availability was low in the vegetation period -0.9 MPa to a depth of 1.0 m. According to modelling experiments, the main salt components in the soil solution drive the transfer of soil organic matter (SOM) and heavy metals (HM). The composition of the soil solution determined by the calcium carbonate equilibrium (CCE) and the association and complexation of ions. ION-3 software was used to calculate the ion equilibrium in the soil solution. Macro-ions Cа2+, Mg2+, SO42-, and CO32- partly bonded as ion pairs. Oversaturation of the soil solution with CaCO3 was calculated according to the analytical content of macro-ion, which was high up to 1000 units, and its value decreased in response to ionic strength, activity, association, complexation, and thermodynamic equilibrium of macro-ions in the soil solution. Oversaturation calculated for Salic Solonetz and Gleyic Solonetz soil solutions was small considering the SOM content. Calculations indicate the profile and lateral loss of C from the soil to the vadose zone. The content of Pb in the soil solution was calculated sirca 75%-80%. The calculated coefficient of Pb2+ association was as high as 52.0. The probability of Pb passivation by SOM in the Kastanozem complex was significant. The probability of uncontrolled transfer and accumulation of HM in the soil and vadose zone was high. Biogeosystem Technique (BGT*) transcendental methodology, an innovative methodology created for stable geomorphological system formation to achieve sustainable agriculture and silviculture, was applied. The BGT* elements were: intra-soil milling of the 30-60 cm soil layer for geophysical conditioning; intra-soil continuously-discrete pulse watering for plants and trees to improve the hydrologic regime. The BGT* methodology reduced HM mobility, controlled biodegradation, enriched nutrient biogeochemical cycling, increased C content, increased soil productivity, and reversible carbon sequester in biological form.

Thermal stability and hcp-fcc allotropic transformation in supported Co metal catalysts probed near operando by ferromagnetic NMR.

Despite the fact that cobalt based catalysts are used at the industrial scale for Fischer-Tropsch synthesis, it is not yet clear which cobalt metallic phase is actually at work under operando conditions and what is its state of dispersion. As it turns out, the different phases of metallic cobalt, fcc and hcp, give rise to distinct ferromagnetic nuclear magnetic resonance. Furthermore, within one Co metal particle, the occurrence of several ferromagnetic domains of limited sizes can be evidenced by the specific resonance of Co in multi-domain particles. Consequently, by ferromagnetic NMR, one can follow quantitatively the sintering and phase transitions of dispersed Co metal particles in supported catalysts under near operando conditions. The minimal size probed by ferromagnetic Co NMR is not precisely known but is considered to be in the order of 10 nm for supported Co particles at room temperature and increases to about 35 nm at 850 K. Here, in Co metal Fischer-Tropsch synthesis catalysts supported on ß-SiC, the resonances of the fcc multi-domain, fcc single-domain and hcp Co were clearly distinguished. A careful rationalization of their frequency and width dependence on temperature allowed a quantitative analysis of the spectra in the temperature range of interest, thus reflecting the state of the catalysts under near operando conditions that is without the uncertainty associated with prior quenching. The allotropic transition temperature was found to start at 600-650 K, which is about 50 K below the bulk transition temperature. The phase transition was fully reversible and a significant part of the hcp phase was found to be stable up to 850 K. This anomalous behavior that was observed without quenching might prove to be crucial to understand and model active species not only in catalysts but also in battery materials.

Light regulation of rhodopsin distribution during outer segment renewal in murine rod photoreceptors.

Vision under dim light relies on primary cilia elaborated by rod photoreceptors in the retina. This specialized sensory structure, called the rod outer segment (ROS), comprises hundreds of stacked, membranous discs containing the light-sensitive protein rhodopsin, and the incorporation of new discs into the ROS is essential for maintaining the rod's health and function. ROS renewal appears to be primarily regulated by extrinsic factors (light); however, results vary depending on different model organisms. We generated two independent transgenic mouse lines where rhodopsin's fate is tracked by a fluorescently labeled rhodopsin fusion protein (Rho-Timer) and show that rhodopsin incorporation into nascent ROS discs appears to be regulated by both external lighting cues and autonomous retinal clocks. Live-cell imaging of the ROS isolated from mice exposed to six unique lighting conditions demonstrates that ROS formation occurs in a periodic manner in cyclic light, constant darkness, and artificial light/dark cycles. This alternating bright/weak banding of Rho-Timer along the length of the ROS relates to inhomogeneities in rhodopsin density and potential points of structural weakness. In addition, we reveal that prolonged dim ambient light exposure impacts not only the rhodopsin content of new discs but also that of older discs, suggesting a dynamic interchange of material between new and old discs. Furthermore, we show that rhodopsin incorporation into the ROS is greatly altered in two autosomal recessive retinitis pigmentosa mouse models, potentially contributing to the pathogenesis. Our findings provide insights into how extrinsic (light) and intrinsic (retinal clocks and genetic mutation) factors dynamically regulate mammalian ROS renewal.

Matrix-Assisted Cell Transplantation for the Treatment of Limbal Stem Cell Deficiency in a Rabbit Model.

With the development of regenerative medicine in ophthalmology, the identification of cells with high proliferative potential in the limbal area has attracted the attention of ophthalmologists and offered a new option for treatment in clinical practice. Limbal stem cell deficiency (LSCD) is an identified eye disease with a difficult and negative outcome, for which the traditional treatment is keratoplasty. This study sought to evaluate the efficacy of matrix-assisted cell transplantation consisting of in vitro-cultured autologous limbal stem cells (LSCs) and type I collagen for the treatment of LSCD in rabbits. LSCD was induced in 10 rabbits by a combination of mechanical limbectomy and alkali burns. Cells were cultured on a plate for 14 days before being transferred to a collagen-based matrix for another 7 days. Rabbits were divided into two groups as follows: the experimental group (five rabbits) received matrix-assisted cell transplantation, while the control group (five rabbits) received only conservative therapy with anti-inflammatory eye drops. During the postoperative period, all rabbits were examined using slit-lamp biomicroscopy with photo-registration and fluorescent staining, impression cytology and anterior segment optical coherence tomography (AS-OCT). Rabbits were euthanized at 30 and 120 days, and their corneas were processed for histology and immunohistochemistry. As a consequence, rabbits in the experimental group demonstrated the restoration of the corneal epithelium and transparency without epithelial defects. Moreover, goblet cells were absent in the central zone of the corneal epithelium. In conclusion, our new method of treatment enhanced the corneal surface and is an effective method of treatment for LSCD in rabbits.

Collagen-Based Artificial Cornea for Lamellar Keratoplasty: An Early Case Report.

PURPOSE: The aim of this study was to evaluate Viscoll collagen membrane (VCM) for lamellar keratoplasty. METHODS: A 54-year-old man with grade 4 recurrent pterygium underwent lamellar keratoplasty using VCM as the graft material. Standard keratoplasty postoperative treatments, including topical antibiotic-corticosteroid and artificial tears, were administered. RESULTS: Complete graft epithelialization was achieved after 4 days of the surgery. Follow-up at 9 months showed no pterygium recurrence as well as good integration of the VCM graft into the surrounding tissues with preserved transparency. CONCLUSIONS: This case demonstrated that VCM possesses great potential as an alternative to the human donor cornea for lamellar keratoplasty; however, the application of VCM for lamellar keratoplasty still needs additional evaluation.

First steps into the cloud: Using Amazon data storage and computing with Python notebooks.

With the oncoming age of big data, biologists are encountering more use cases for cloud-based computing to streamline data processing and storage. Unfortunately, cloud platforms are difficult to learn, and there are few resources for biologists to demystify them. We have developed a guide for experimental biologists to set up cloud processing on Amazon Web Services to cheaply outsource data processing and storage. Here we provide a guide for setting up a computing environment in the cloud and showcase examples of using Python and Julia programming languages. We present example calcium imaging data in the zebrafish brain and corresponding analysis using suite2p software. Tools for budget and user management are further discussed in the attached protocol. Using this guide, researchers with limited coding experience can get started with cloud-based computing or move existing coding infrastructure into the cloud environment.

Welcome to the lab.

Having a formal onboarding procedure for new lab members can lead to a happier and more productive working environment.

Corneal Stroma Regeneration with Collagen-Based Hydrogel as an Artificial Stroma Equivalent: A Comprehensive In Vivo Study.

Restoring the anatomical and functional characteristics of the cornea using various biomaterials is especially relevant in the context of a global shortage of donor tissue. Such biomaterials must be biocompatible, strong, and transparent. Here, we report a Viscoll collagen membrane with mechanical and optical properties suitable for replacing damaged stromal tissue. After removing a portion of the stroma, a Viscoll collagen membrane was implanted into the corneas of rabbits. After 6 months, the active migration of host cells into Viscoll collagen membranes was noted, with the preservation of corneal transparency in all experimental animals. Effective integration of the Viscoll collagen membrane with corneal tissue promoted nerve regeneration in vivo, as confirmed by in vivo confocal microscopy. We also demonstrated the safety and efficacy of the Viscoll collagen membrane for corneal stroma regeneration. Thus, in combination with the proposed packaging format that provides long-term storage of up to 10 months, this material has great potential for replacing and regenerating damaged stromal tissues.

High-Power Quantum Cascade Lasers Emitting at 8 µm: Technology and Analysis.

In this work, we demonstrate the features of a two-stage epitaxial growth technique and show the results of power and efficiency measurements for three different designs of quantum cascade lasers with a record-high peak power in the 8 µm spectral region. The time-resolved QCL spectral study proves that InP-based upper cladding paired with an InP contact layer provides better heat dissipation and allows one to reach better power characteristics in comparison with InGaAs-based contact, even with short pulse pumping.

Particle-in-Cell (PIC) simulation of CW industrial heating magnetron.

Modern CW industrial heating magnetrons are capable for producing as high as 300 kW of continuous-wave microwave power at frequencies around 900 MHz and are sold commercially [Wynn et al., 2004]. However, to utilize these magnetrons in some specific research and scientific applications being of interest for the Air Force, the necessary adaptation and redesign are required. It means that the detailed knowledge of principles of their operation and full understanding of how the changes of the design parameters affect their operational characteristics are necessary. We have developed and tested computer model of a 10-vane high-power strapped magnetron, which geometrical dimensions and design parameters are close to those of the California Tube Laboratory's commercially produced CWM-75/100L tube. The computer model is built by using the 3-D Improved Concurrent Electromagnetic Particle-in-Cell (ICEPIC) code. Simulations of the strapped magnetron operation are performed and the following operational characteristics are obtained during the simulation: frequency and mode of magnetron oscillations, output microwave power and efficiency of magnetron operation, anode current and anode-cathode voltage dynamics. The developed computer model of a non-relativistic high-power strapped magnetron may be used by the industrial magnetron community for designing following generations of the CW industrial heating high-power magnetrons.