Green, Safe, and Reliable Synthesis of Bimetallic MOF-808 Nanozymes With Enhanced Aqueous Stability and Reactivity for Biological Applications.

Bimetallic metal-organic frameworks (MOFs) are promising nanomaterials whose reactivity towards biomolecules remains challenging due to issues related to synthesis, stability, control over metal oxidation state, phase purity, and atomic level characterization. Here, these shortcomings are rationally addressed through development of a synthesis of mixed metal Zr/Ce-MOFs in aqueous environment, overcoming significant hurdles in the development of MOF nanozymes, sufficiently stable on biologically relevant conditions. Specifically, a green and safe synthesis of Zr/Ce-MOF-808 is reported in water/acetic acid mixture which affords remarkably water-stable materials with reliable nanozymatic reactivity, including MOFs with a high Ce content previously reported to be unstable in water. The new materials outperform analogous bimetallic MOF nanozymes, showcasing that rational synthesis modifications could impart outstanding improvements. Further, atomic-level characterization by X-ray Absorption Fine Structure (XAFS) and X-ray Diffraction (XRD) confirmed superior nanozymes arise from differences in the synthetic method, which results in aqueous stable materials, and Ce incorporation, which perturbs the ligand exchange dynamics of the material, and could ultimately be used to fine tune the intrinsic MOF reactivity. Similar rational strategies which leverage metals in a synergistic manner should enable other water-stable bimetallic MOF nanozymes able to surpass existing ones, laying the path for varied biotechnological applications.

Charge Storage Mechanism in Electrospun Spinel-Structured High-Entropy (Mn0.2 Fe0.2 Co0.2 Ni0.2 Zn0.2 )3 O4 Oxide Nanofibers as Anode Material for Li-Ion Batteries.

High-entropy oxides (HEOs) have emerged as promising anode materials for next-generation lithium-ion batteries (LIBs). Among them, spinel HEOs with vacant lattice sites allowing for lithium insertion and diffusion seem particularly attractive. In this work, electrospun oxygen-deficient (Mn,Fe,Co,Ni,Zn) HEO nanofibers are produced under environmentally friendly calcination conditions and evaluated as anode active material in LIBs. A thorough investigation of the material properties and Li+ storage mechanism is carried out by several analytical techniques, including ex situ synchrotron X-ray absorption spectroscopy. The lithiation process is elucidated in terms of lithium insertion, cation migration, and metal-forming conversion reaction. The process is not fully reversible and the reduction of cations to the metallic form is not complete. In particular, iron, cobalt, and nickel, initially present mainly as Fe3+ , Co3+ /Co2+ , and Ni2+ , undergo reduction to Fe0 , Co0 , and Ni0 to different extent (Fe < Co < Ni). Manganese undergoes partial reduction to Mn3+ /Mn2+ and, upon re-oxidation, does not revert to the pristine oxidation state (+4). Zn2+ cations do not electrochemically participate in the conversion reaction, but migrating from tetrahedral to octahedral positions, they facilitate Li-ion transport within lattice channels opened by their migration. Partially reversible crystal phase transitions are observed.

A three-step process of manganese acquisition and storage in the microalga Chlorella sorokiniana.

Metabolism of metals in microalgae and adaptation to metal excess are of significant environmental importance. We report a three-step mechanism that the green microalga Chlorella sorokiniana activates during the acquisition of and adaptation to manganese (Mn), which is both an essential trace metal and a pollutant of waters. In the early stage, Mn2+ was mainly bound to membrane phospholipids and phosphates in released mucilage. The outer cell wall was reorganized and lipids were accumulated, with a relative increase in lipid saturation. Intracellular redox settings were rapidly altered in the presence of Mn excess, with increased production of reactive oxygen species that resulted in lipid peroxidation and a decrease in the concentration of thiols. In the later stage, Mn2+ was chelated by polyphosphates and accumulated in the cells. The structure of the inner cell wall was modified and the redox milieu established a new balance. Polyphosphates serve as a transient Mn2+ storage ligand, as proposed previously. In the final stage, Mn was stored in multivalent Mn clusters that resemble the structure of the tetramanganese-calcium core of the oxygen-evolving complex. The present findings elucidate the bioinorganic chemistry and metabolism of Mn in microalgae, and may shed new light on water-splitting Mn clusters.

Heavy metals concentrations and speciation of Pb and Ni in airborne particulate matter over two residential sites in Greater Cairo - reflection from synchrotron radiation.

Synchrotron radiation-based techniques [X-ray absorption near-edge structure (XANES) and X-ray fluorescence (XRF)] combined with inductively coupled plasma-mass spectrometry (ICP-MS) were used for the assessment of heavy metals concentrations as well as lead (Pb) and nickel (Ni) speciation in airborne particulate matter (PM10) over two residential sites in Greater Cairo. Nineteen 24 h high-volume samples collected at Giza (G) Square and Helwan (H) University (Egypt) were selected for this study. Mean concentrations of heavy metals in PM10 at both sites were found to have the same descending order of Pb > Cu > Ni > Cd > Co > As, of which concentrations of Pb, Cu, Ni and Cd in H samples were higher than those in G samples. For Pb, synchrotron-based XRF results were in good agreement with concentrations obtained by ICP-MS. The XANES spectra of PM10 at the Pb L2-edge and Ni K-edge were compared with those of Pb and Ni in model standard compounds to provide information on the potential oxidation states as well as the chemical forms of those elements. The data show that Pb has similar chemical environments in both series G and H with the predominance of Pb2+ oxidation state. Nickel was found as Ni(OH)2, NiO and Ni metal in the analyzed samples. However, the content of Ni in the background filter shows a very strong interference with that of the collected PM10. Carcinogenic and non-carcinogenic risks resulting from the inhalation of the studied heavy metals were assessed for children and adult residents and were found below the safe limits, at both sites.

Biotransformation of selenium in the mycelium of the fungus Phycomyces blakesleeanus.

Biotransformation of toxic selenium ions to non-toxic species has been mainly focused on biofortification of microorganisms and production of selenium nanoparticles (SeNPs), while far less attention is paid to the mechanisms of transformation. In this study, we applied a combination of analytical techniques with the aim of characterizing the SeNPs themselves as well as monitoring the course of selenium transformation in the mycelium of the fungus Phycomyces blakesleeanus. Red coloration and pungent odor that appeared after only a few hours of incubation with 10 mM Se+4 indicate the formation of SeNPs and volatile methylated selenium compounds. SEM-EDS confirmed pure selenium NPs with an average diameter of 57 nm, which indicates potentially very good medical, optical, and photoelectric characteristics. XANES of mycelium revealed concentration-dependent mechanisms of reduction, where 0.5 mM Se+4 led to the predominant formation of Se-S-containing organic molecules, while 10 mM Se+4 induced production of biomethylated selenide (Se-2) in the form of volatile dimethylselenide (DMSe) and selenium nanoparticles (SeNPs), with the SeNPs/DMSe ratio rising with incubation time. Several structural forms of elemental selenium, predominantly monoclinic Se8 chains, together with trigonal Se polymer chain, Se8 and Se6 ring structures, were detected by Raman spectroscopy.

Trace-element XAFS sensitivity: a stress test for a new XRF multi-detector.

X-ray absorption fine-structure (XAFS) spectroscopy can assess the chemical speciation of the elements providing their coordination and oxidation state, information generally hidden to other techniques. In the case of trace elements, achieving a good quality XAFS signal poses several challenges, as it requires high photon flux, counting statistics and detector linearity. Here, a new multi-element X-ray fluorescence detector is presented, specifically designed to probe the chemical speciation of trace 3d elements down to the p.p.m. range. The potentialities of the detector are presented through a case study: the speciation of ultra-diluted elements (Fe, Mn and Cr) in geological rocks from a calcareous formation related to the dispersal processes from Ontong (Java) volcanism (mid-Cretaceous). Trace-elements speciation is crucial in evaluating the impact of geogenic and anthropogenic harmful metals on the environment, and to evaluate the risks to human health and ecosystems. These results show that the new detector is suitable for collecting spectra of 3d elements in trace amounts in a calcareous matrix. The data quality is high enough that quantitative data analysis could be performed to determine their chemical speciation.

Copper Oxide Nanomaterial Fate in Plant Tissue: Nanoscale Impacts on Reproductive Tissues.

A thorough understanding of the implications of chronic low-dose exposure to engineered nanomaterials through the food chain is lacking. The present study aimed to characterize such a response in Cucurbita pepo L. (zucchini) upon exposure to a potential nanoscale fertilizer: copper oxide (CuO) nanoparticles. Zucchini was grown in soil amended with nano-CuO, bulk CuO (100 mg Kg-1), and CuSO4 (320 mg Kg-1) from germination to flowering (60 days). Nano-CuO treatment had no impact on plant morphology or growth nor pollen formation and viability. The uptake of Cu was comparable in the plant tissues under all treatments. RNA-seq analyses on vegetative and reproductive tissues highlighted common and nanoscale-specific components of the response. Mitochondrial and chloroplast functions were uniquely modulated in response to nanomaterial exposure as compared with conventional bulk and salt forms. X-ray absorption spectroscopy showed that the Cu local structure changed upon nano-CuO internalization, suggesting potential nanoparticle biotransformation within the plant tissues. These findings demonstrate the potential positive physiological, cellular, and molecular response related to nano-CuO application as a plant fertilizer, highlighting the differential mechanisms involved in the exposure to Cu in nanoscale, bulk, or salt forms. Nano-CuO uniquely stimulates plant response in a way that can minimize agrochemical inputs to the environment and therefore could be an important strategy in nanoenabled agriculture.

Iron Speciation in Organic Matter Fractions Isolated from Soils Amended with Biochar and Organic Fertilizers.

The role and distribution of iron (Fe) species in physical soil fractions have received remarkably little attention in field-scale systems. Here, we identify and quantify the Fe phases into two fractions (fine sand, FSa, and fine silt and clay, FSi + Cl), isolated from an agricultural soil unamended and amended with different organic materials, by Fe K-edge extended X-ray absorption fine structure (EXAFS) spectroscopy. The linear combination fitting and wavelet transform of EXAFS data revealed noticeable differences between unamended FSa and FSi + Cl fractions. Specifically, the FSi + Cl fraction was mainly characterized by ferrihydrite (48%) and Fe(III)-soil organic matter (SOM) complexes (37%), whereas in the FSa fraction, ferrihydrite still represented a major phase (44%), with a lower contribution from Fe(III)-SOM (18%). In the FSa fraction, the addition of the organic amendments resulted in an increase of Fe-SOM complexes (31-35%) and a decrease of ferrihydrite (28-29%). By contrast, in the amended FSi + Cl fractions, the added organic matter led to negligible changes in percent ferrihydrite. Therefore, regardless of the amendment type, the addition of organic matter to soil increased the capability of the coarse fraction (FSa) to stabilize organic carbon, thus pointing out that the role of FSa in carbon sequestration in agricultural soils at a global scale may be overlooked.

Raising the COx Methanation Activity of a Ru/γ-Al2 O3 Catalyst by Activated Modification of Metal-Support Interactions.

Ru/Al2 O3 is a highly stable, but less active catalyst for methanation reactions. Herein we report an effective approach to significantly improve its performance in the methanation of CO2 /H2 mixtures. Highly active and stable Ru/γ-Al2 O3 catalysts were prepared by high-temperature treatment in the reductive reaction gas. Operando/in situ spectroscopy and STEM imaging reveals that the strongly improved activity, by factors of 5 and 14 for CO and CO2 methanation, is accompanied by a flattening of the Ru nanoparticles and the formation of highly basic hydroxylated alumina sites. We propose a modification of the metal-support interactions (MSIs) as the origin of the increased activity, caused by modification of the Al2 O3 surface in the reductive atmosphere and an increased thermal mobility of the Ru nanoparticles, allowing their transfer to modified surface sites.

Localized Symmetry Breaking for Tuning Thermal Expansion in ScF3 Nanoscale Frameworks.

The local symmetry, beyond the averaged crystallographic structure, tends to bring unusual performances. Negative thermal expansion is a peculiar physical property of solids. Here, we report the delicate design of the localized symmetry breaking to achieve controllable thermal expansion in ScF3 nanoscale frameworks. Intriguingly, an isotropic zero thermal expansion is concurrently engineered by localized symmetry breaking, with a remarkably low coefficient of thermal expansion of about +4.0 × 10-8/K up to 675 K. This mechanism is investigated by the joint analysis of atomic pair distribution function of synchrotron X-ray total scattering and extended X-ray absorption fine structure spectra. A localized rhombohedral distortion presumably plays a critical role in stiffening ScF3 nanoscale frameworks and concomitantly suppressing transverse thermal vibrations of fluorine atoms. This physical scenario is also theoretically corroborated by the extinction of phonon modes with negative Grüneisen parameters in rhombohedral ScF3. The present work opens an untraditional chemical modification route to achieve controllable thermal expansion by breaking local symmetries in materials.

Improving the quality of XAFS data.

Following the Q2XAFS Workshop and Satellite to IUCr Congress 2017 on `Data Acquisition, Treatment, Storage - quality assurance in XAFS spectroscopy', a summary is given of the discussion on different aspects of a XAFS experiment that affect data quality. Some pertinent problems ranging from sources and minimization of noise to harmonic contamination and uncompensated monochromator glitches were addressed. Also, an overview is given of the major limitations and pitfalls of a selection of related methods, such as photon-out spectroscopies and energy-dispersive XAFS, and of increasingly common applications, namely studies at high pressure, and time-resolved investigations of catalysts in operando. Advice on how to avoid or deal with these problems and a few good practice recommendations are reported, including how to correctly report results.

Selenite Uptake by Ca-Al LDH: A Description of Intercalated Anion Coordination Geometries.

Layered double hydroxides (LDHs) are anion exchangers with a strong potential to scavenge anionic contaminants in aquatic environments. Here, the uptake of selenite (SeO32-) by Ca-Al LDHs was investigated as a function of Se concentration. Thermodynamic modeling of batch sorption isotherms shows that the formation of SeO32--intercalated AFm (hydrated calcium aluminate monosubstituent) phase, AFm-SeO3, is the dominant mechanism controlling the retention of Se at medium loadings. AFm-Cl2 shows much stronger affinity and larger distribution ratio (Rd ∼ 17800 L kg-1) toward SeO32- than AFm-SO4 (Rd ∼ 705 L kg-1). At stoichiometric SeO32- loading for anion exchange, the newly formed AFm-SeO3 phase results in two basal spacing, i.e., 9.93 ± 0.06 Å and ∼11.03 ± 0.03 Å. Extended X-ray absorption fine structure (EXAFS) spectra indicate that the intercalated SeO32- forms inner-sphere complexes with the Ca-Al-O layers. In situ X-ray diffraction (XRD) shows that basal spacing of Ca-Al LDHs have a remarkable linear relationship with the size of hydrated intercalated anions (i.e., Cl-, SO42-, MoO42-, and SeO32-). Contrary to AFm-SeO3 with inner-sphere SeO32- complexes in the interlayer, the phase with hydrogen-bonded inner-sphere complexed SeO32- is kinetically favored but thermodynamically unstable. This work offers new insights about the determination of intercalated anion coordination geometries via XRD analyses.

On the coordination of Zn2+ ion in Tf2N- based ionic liquids: structural and dynamic properties depending on the nature of the organic cation.

A synergic approach combining molecular dynamics (MD) simulations and X-ray absorption spectroscopy has been used to investigate diluted solutions of zinc bis(trifluoromethanesulfonyl)imide (Zn(Tf2N)2) in Tf2N- based ionic liquids (ILs) having different organic cations, namely the 1-butyl-3-methylimidazolium ([C4(mim)]+), 1,8-bis(3-methylimidazolium-1-yl)octane ([C8(mim)2]2+), N,N,N-trimethyl-N-(2-hydroxyethyl)ammonium ([Choline]+) and butyltrimethylammonium ([BTMA]+) ions. All of the ILs tend to dissolve the Zn(Tf2N)2 species giving rise to a different structural arrangement around the Zn2+ as compared to that of the salt crystallographic structure. A quantitative analysis of the Zn K-edge extended X-ray absorption fine structure (EXAFS) spectra of the solutions has been carried out based on the microscopic description of the systems derived from the MD simulations. A very good agreement between theoretical and experimental EXAFS signals has been obtained, allowing us to assess the reliability of the MD structural results for all the investigated solutions. The Zn2+ ion has been shown to be coordinated by six oxygen atoms of the Tf2N- anions arranged in an octahedral geometry in all the Tf2N- based ILs, regardless of the organic cation of the IL solvent. However, the nature of the organic cation has a small influence on the overall spatial arrangement of the Tf2N- anions in the Zn2+ first solvation shell: two different Zn-Tf2N complexes are found in solution, a 5-fold one, with one bidentate and four monodentate Tf2N- anions, and a 6-fold one with only monodentate ligands, with the ratio between the two species being slightly dependent on the IL cation. The IL ion three-dimensional arrangements in the different IL solutions were also investigated by carrying out a thorough analysis of the MD simulations, highlighting similarities and differences between imidazolium and ammonium based IL systems.

Melting of iron determined by X-ray absorption spectroscopy to 100 GPa.

Temperature, thermal history, and dynamics of Earth rely critically on the knowledge of the melting temperature of iron at the pressure conditions of the inner core boundary (ICB) where the geotherm crosses the melting curve. The literature on this subject is overwhelming, and no consensus has been reached, with a very large disagreement of the order of 2,000 K for the ICB temperature. Here we report new data on the melting temperature of iron in a laser-heated diamond anvil cell to 103 GPa obtained by X-ray absorption spectroscopy, a technique rarely used at such conditions. The modifications of the onset of the absorption spectra are used as a reliable melting criterion regardless of the solid phase from which the solid to liquid transition takes place. Our results show a melting temperature of iron in agreement with most previous studies up to 100 GPa, namely of 3,090 K at 103 GPa.

Fe-Doping-Induced Magnetism in Nano-Hydroxyapatites.

Doping of biocompatible nanomaterials with magnetic phases is currently one of the most promising strategies for the development of advanced magnetic biomaterials. However, especially in the case of iron-doped magnetic hydroxyapatites, it is not clear if the magnetic features come merely from the magnetic phases/ions used as dopants or from complex mechanisms involving interactions at the nanoscale. Here, we report an extensive chemical-physical and magnetic investigation of three hydroxyapatite nanocrystals doped with different iron species and containing small or no amounts of maghemite as a secondary phase. The association of several investigation techniques such as X-ray absorption spectroscopy, Mössbauer, magnetometry, and TEM allowed us to determine that the unusual magnetic properties of Fe2+/3+-doped hydroxyapatites (FeHA) occur by a synergy of two different phenomena: i.e., (i) interacting superparamagnetism due to the interplay between iron-doped apatite and iron oxide nanoparticles as well as to the occurrence of dipolar interactions and (ii) interacting paramagnetism due to Fe3+ ions present in the superficial hydrated layer of the apatite nanophase and, to a lesser extent, paramagnetism due to isolated Fe3+ ions in the apatite lattice. We also show that a major player in the activation of the above phenomena is the oxidation of Fe2+ into Fe3+, as induced by the synthesis process, and their consequent specific positioning in the FeHA structure.

Determination of the S-ZnO structural interaction in thiol-capped ZnO nanoparticles: a sulfur K-edge XAS study.

ZnO nanoparticles capped with thiol molecules display room temperature ferromagnetism which has been associated with the structural details of the interface formed between the organic molecule and the ZnO core. Although the local order around sulfur atoms at the ZnS/ZnO interface has been related to the occurrence of the ferromagnetic like behavior, no direct structural determination has been obtained yet. We report here a detailed x-ray absorption spectroscopy study performed at the sulfur K-edge to determine the local structure around the sulfur atoms in these systems and how it is modified by varying the length of the organic molecule.

Enhanced Electrocatalytic Oxygen Evolution in Au-Fe Nanoalloys.

Oxygen evolution reaction (OER) is the most critical step in water splitting, still limiting the development of efficient alkaline water electrolyzers. Here we investigate the OER activity of Au-Fe nanoalloys obtained by laser-ablation synthesis in solution. This method allows a high amount of iron (up to 11 at %) to be incorporated into the gold lattice, which is not possible in Au-Fe alloys synthesized by other routes, due to thermodynamic constraints. The Au0.89 Fe0.11 nanoalloys exhibit strongly enhanced OER in comparison to the individual pure metal nanoparticles, lowering the onset of OER and increasing up to 20 times the current density in alkaline aqueous solutions. Such a remarkable electrocatalytic activity is associated to nanoalloying, as demonstrated by comparative examples with physical mixtures of gold and iron nanoparticles. These results open attractive scenarios to the use of kinetically stable nanoalloys for catalysis and energy conversion.

Speciation of Gold Nanoparticles by Ex Situ Extended X-ray Absorption Fine Structure and X-ray Absorption Near Edge Structure.

A combined X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) methodology is here presented on a series of partially and fully reduced Au(III) samples. This allows monitoring the relative fraction of Au(III) and Au(0) in the studied samples, displaying a consistent and independent outcome. The strategy followed is based, for the first time, on two structural models that can be fitted simultaneously, and it evaluates the correlation among strongly correlated parameters such as coordination number and the Debye-Waller factor. The results of the present EXAFS and XANES approach can be extended to studies based on X-ray absorption spectroscopy experiments for the in situ monitoring of the formation of gold nanoclusters.

Structural properties of geminal dicationic ionic liquid/water mixtures: a theoretical and experimental insight.

The structural behavior of geminal dicationic ionic liquid 1,n-bis[3-methylimidazolium-1-yl] alkane bromide ([Cn(mim)2]Br2)/water mixtures has been studied using extended X-ray absorption fine structure (EXAFS) spectroscopy in combination with molecular dynamics (MD) simulations. The properties of the mixtures are investigated as a function of both water concentration and alkyl-bridge chain length. The very good agreement between the EXAFS experimental data and the theoretical curves calculated from the MD structural results has proven the validity of the theoretical framework used for all of the investigated systems. In all the solutions the water molecules are preferentially coordinated with the Br(-) ion, even if a complex network of interactions among dications, anions and water molecules takes place. The local molecular arrangement around the bromide ion is found to change with increasing water content, as more and more water molecules are accomodated in the Br(-) first coordination shell. Moreover, with the decrease of the alkyl-bridge chain length, the interactions between dications and anions increase, with Br(-) forming a bridge between the two imidazolium rings of the same dication. On the other hand, in [Cn(mim)2]Br2/water mixtures with long alkyl-bridge chains peculiar internal arrangements of the dications are found, leading to different structural features of geminal dicationic ionic liquids as compared to their monocationic counterparts.

Water oxidation surface mechanisms replicated by a totally inorganic tetraruthenium-oxo molecular complex.

Solar-to-fuel energy conversion relies on the invention of efficient catalysts enabling water oxidation through low-energy pathways. Our aerobic life is based on this strategy, mastered by the natural Photosystem II enzyme, using a tetranuclear Mn-oxo complex as oxygen evolving center. Within artificial devices, water can be oxidized efficiently on tailored metal-oxide surfaces such as RuO2. The quest for catalyst optimization in vitro is plagued by the elusive description of the active sites on bulk oxides. Although molecular mimics of the natural catalyst have been proposed, they generally suffer from oxidative degradation under multiturnover regime. Here we investigate a nano-sized Ru4-polyoxometalate standing as an efficient artificial catalyst featuring a totally inorganic molecular structure with enhanced stability. Experimental and computational evidence reported herein indicates that this is a unique molecular species mimicking oxygenic RuO2 surfaces. Ru4-polyoxometalate bridges the gap between homogeneous and heterogeneous water oxidation catalysis, leading to a breakthrough system. Density functional theory calculations show that the catalytic efficiency stems from the optimal distribution of the free energy cost to form reaction intermediates, in analogy with metal-oxide catalysts, thus providing a unifying picture for the two realms of water oxidation catalysis. These correlations among the mechanism of reaction, thermodynamic efficiency, and local structure of the active sites provide the key guidelines for the rational design of superior molecular catalysts and composite materials designed with a bottom-up approach and atomic control.