Characterizing Non-covalent Protein Complexes Using Asymmetrical Flow Field-Flow Fractionation On-Line Coupled to Native Mass Spectrometry.

We report an online analytical platform based on the coupling of asymmetrical flow field-flow fractionation (AF4) and native mass spectrometry (nMS) in parallel with UV-absorbance, multi-angle light scattering (MALS), and differential-refractive-index (UV-MALS-dRI) detectors to elucidate labile higher-order structures (HOS) of protein biotherapeutics. The technical aspects of coupling AF4 with nMS and the UV-MALS-dRI multi-detection system are discussed. The "slot-outlet" technique was used to reduce sample dilution and split the AF4 effluent between the MS and UV-MALS-dRI detectors. The stability, HOS, and dissociation pathways of the tetrameric biotherapeutic enzyme (anticancer agent) l-asparaginase (ASNase) were studied. ASNase is a 140 kDa homo-tetramer, but the presence of intact octamers and degradation products with lower molecular weights was indicated by AF4-MALS/nMS. Exposing ASNase to 10 mM NaOH disturbed the equilibrium between the different non-covalent species and led to HOS dissociation. Correlation of the information obtained by AF4-MALS (liquid phase) and AF4-nMS (gas phase) revealed the formation of monomeric, tetrameric, and pentameric species. High-resolution MS revealed deamidation of the main intact tetramer upon exposure of ASNase to high pH (NaOH and ammonium bicarbonate). The particular information retrieved from ASNase with the developed platform in a single run demonstrates that the newly developed platform can be highly useful for aggregation and stability studies of protein biopharmaceuticals.

Aggregation behavior of fullerenes in aqueous solutions: a capillary electrophoresis and asymmetric flow field-flow fractionation study.

In this work, the electrophoretic behavior of hydrophobic fullerenes [buckminsterfullerene (C60), C70, and N-methyl-fulleropyrrolidine (C60-pyrr)] and water-soluble fullerenes [fullerol (C60(OH)24); polyhydroxy small gap fullerene, hydrated (C120(OH)30); C60 pyrrolidine tris acid (C60-pyrr tris acid); and (1,2-methanofullerene C60)-61-carboxylic acid (C60CHCOOH)] in micellar electrokinetic capillary chromatography (MECC) was evaluated. The aggregation behavior of the water-soluble compounds in MECC at different buffer and sodium dodecyl sulfate (SDS) concentrations and pH values of the background electrolyte (BGE) was studied by monitoring the changes observed in the electrophoretic pattern of the peaks. Broad and distorted peaks that can be attributed to fullerene aggregation were obtained in MECC which became narrower and more symmetric by working at low buffer and SDS concentrations (below the critical micelle concentration, capillary zone electrophoresis (CZE) conditions). For the characterization of the suspected aggregates formed (size and shape), asymmetrical flow field-flow fractionation (AF4) and transmission electron microscopy (TEM) were used. The results showed that the increase in the buffer concentration promoted the aggregation of the particles, while the presence of SDS micelles revealed multiple peaks corresponding to particles of different aggregation degrees. Furthermore, MECC has been applied for the first time for the analysis of C60 in two different cosmetic products (i.e., anti-aging serum and facial mask).

Non-aqueous capillary electrophoresis separation of fullerenes and C60 fullerene derivatives.

As the interest in the use of fullerene compounds in biomedical and cosmetic applications increases, so too does the need to develop methods for their determination and quantitation in such complex matrices. In this work, we studied the behavior of C60 and C70 fullerenes in non-aqueous capillary electrophoresis, as well as two C60 fullerene derivatives not previously reported by any electrophoretic method, N-methyl-fulleropyrrolidine and (1,2-methanofullerene C60)-61-carboxylic acid. The separation was performed using fused-silica capillaries with an I.D. of 50 µm and tetraalkylammonium salts, namely tetra-n-decylammonium bromide (200 mM) and tetraethylammonium bromide (40 mM), in a solvent mixture containing 6 % methanol and 10 % acetic acid in acetonitrile/chlorobenzene (1:1 v/v) as the background electrolyte. Detection limits, based on a signal-to-noise ratio of 3:1, were calculated, and values between 1 and 3.7 mg/L were obtained. Good run-to-run and day-to-day precisions on concentration were achieved with relative standard deviation lower than 15 %. For the first time, an electrophoretic technique has been applied for the analysis of C60 fullerene in a commercial cosmetic cream. A standard addition method was used for quantitation, and the result was compared with that obtained by analyzing the same cream by liquid chromatography coupled to mass spectrometry.

Field-flow fractionation for molecular-interaction studies of labile and complex systems: A critical review.

Asymmetrical flow field-flow fractionation (AF4) has attracted considerable attention as a size-based separation technique, due to its mild separation conditions, broad working range (from approximately 103 to 109 Da molecular mass or from 1 nm to 1 µm particle diameter), and versatility. AF4 is primarily being used to measure particle size, polydispersity, and physical stability of various systems, such as (bio)-macromolecules and nanoparticles. In comparison with size-exclusion chromatography (packed column), AF4 (open channel) allows separation while preserving labile structures. Monitoring of interactions between different compounds and in very complex matrices is possible. Preservation of the structure and correlation of structural characteristics with activity and functionality can bolster the development of new therapeutic strategies for diseases and new materials with improved properties. In this review, a detailed overview is presented of developments in AF4 for interaction studies between various systems, such as protein-protein, polymer-polymer, nanoparticle-drug, and nanoparticle-protein. The prospects and obstacles for AF4, and other less-commonly used types of FFF, for studying interactions within complex and fragile systems are covered. Coupling AF4 to a variety of detection systems can greatly contribute to the understanding of the interaction/association processes and provide information on the interaction kinetics. This review is intended to provide comprehensive documentation on the types of information (structural, morphological, chemical) on molecular interactions that can be retrieved by AF4.

Surface Acoustic Wave Nebulization-Mass Spectrometry as a New Tool to Investigate the Water Sensitivity Behavior of 20th Century Oil Paints.

The sensitive surfaces of many unvarnished 20th century oil paintings are of great concern for conservators and collection keepers. They may show degradation problems such as paint delamination, dripping, and soft and sticky paint and pose challenges for cleaning due to solvent sensitivity. We report for the first time the use of an innovative ambient ionization technique, surface acoustic wave nebulization-mass spectrometry (SAWN-MS), for the identification and characterization of fatty acids, dicarboxylic species and glycerides in water-sensitive modern oil paints. The composition of 10 relevant Winsor and Newton 1964-1965 paint swatches that present different degrees of water sensitivity and two paint samples from a painting by the British artist Francis Bacon were studied. Principal component analysis was used for SAWN-MS data classification. Electrospray ionization (ESI)-MS was used as control method, specifically to compare the obtained ratios of markers of interest by the two ionization techniques. The results obtained by both ESI-MS and SAWN-MS are correlated and discussed in a broader context including the information on the oil media obtained by gas chromatography (GC-MS) and also on the inorganic materials and salts characterized using a combination of methods in previous reports on samples from the same manufacturer. SAWN-MS was found to be a suitable tool for the determination of soluble organic constituents present in the paints. The method provides an indication of the level of oxidation and hydrolysis of the paint film by monitoring specific markers such as free palmitic and stearic acids, azelaic acid, monoacylglycerols, and diacylglycerols. The data showed that a higher level of water sensitivity coupled with a high level of oxidation and hydrolysis is linked to higher dicarboxylic acid, diacyl- and triacylglyceride content and lower levels of short chain fatty acids. The data obtained by SAWN-MS provided a good correlation between the monitored species and the degree of water sensitivity.

Asymmetrical flow field-flow fractionation to probe the dynamic association equilibria of ß-D-galactosidase.

Protein dynamics play a significant role in many aspects of enzyme activity. Monitoring of structural changes and aggregation of biotechnological enzymes under native conditions is important to safeguard their properties and function. In this work, the potential of asymmetrical flow field-flow fractionation (AF4) to study the dynamic association equilibria of the enzyme ß-D-galactosidase (ß-D-Gal) was evaluated. Three commercial products of ß-D-Gal were investigated using carrier liquids containing sodium chloride or ammonium acetate, and the effect of adding magnesium (II) chloride to the carrier liquid was assessed. Preservation of protein structural integrity during AF4 analysis was essential and the influence of several parameters, such as the focusing step (including use of frit-inlet), cross flow, and injected amount, was studied. Size-exclusion chromatography (SEC) and dynamic light scattering (DLS) were used to corroborate the in-solution enzyme oligomerization observed with AF4. In contrast to SEC, AF4 provided sufficiently mild separation conditions to monitor protein conformations without disturbing the dynamic association equilibria. AF4 analysis showed that ammonium acetate concentrations above 40 mM led to further association of the dimers ("tetramerization") of ß-D-Gal. Magnesium ions, which are needed to activate ß-D-Gal, appeared to induce dimer association, raising justifiable questions about the role of divalent metal ions in protein oligomerization and on whether tetramers or dimers are the most active form of ß-D-Gal.

Size distributions of droplets produced by ultrasonic nebulizers.

In many applications where small, similar-sized droplets are needed, ultrasonic nebulizers are employed. Little is known about the mechanism of nebulization, for example about what determines the median droplet size. Even less understood, is the droplet size distribution, which is often simply fitted with a log-normal distribution or assumed to be very narrow. We perform the first systematic study of droplet size distributions for different nebulizer technologies, showing that these distributions can be very well fitted with distributions found for sprays, where the size distribution is completely determined by the corrugation of ligaments and the distribution of ligament sizes. In our case, breakup is believed to be due to pinch-off of Faraday instabilities. The droplet size distribution is then set by the distribution of wavelengths of the standing capillary waves and the roughness of the pinch-off ligaments. We show that different nebulizer technologies produce different size distributions, which we relate to (variation in) wavelengths of the waves that contribute to the droplet formation. We further show that the median droplet size scales with the capillary wavelength, with a proportionality constant that depends only slightly on the type of nebulizer, despite order-of-magnitude differences in other parameters.

Utilizing Surface Acoustic Wave Nebulization (SAWN) for the Rapid and Sensitive Ambient Ionization Mass Spectrometric Analysis of Organic Explosives.

When considering incident investigations and security checks focused on energetic materials, there is an ongoing need for rapid, on-scene chemical identification. Currently applied methods are not capable of meeting all requirements, and hence, portable mass spectrometry is an interesting alternative although many instrumental challenges still exist. To be able to analyze explosives with mass spectrometry outside the traditional laboratory, suitable ambient ionization methods need to be developed. Ideally such methods are also easily implemented in the field requiring limited to no power sources, gas supplies, flow controllers, and heating devices. For this reason, the potential of SAWN (surface acoustic wave nebulization) for the ambient ionization and subsequent mass spectrometric (MS) analysis of organic explosives was investigated in this study. Excellent sensitivity was observed for nitrate-based organic explosives when operating the MS in negative mode. No dominant adduct peaks were observed for the peroxides TATP and HMTD with SAWN-MS in positive mode. The MS spectra indicate extensive fragmentation of the peroxide explosives even under the mild ionization conditions provided by SAWN. The potential of SAWN-MS was demonstrated with the correct identification of nitrate-based organic explosives in pre- and post-explosion case samples in only a fraction of the time and effort required for the regular laboratory analysis. Results show that SAWN-MS can convincingly identify intact organic energetic compounds and mixtures but that sensitivity is not always sufficient to detect traces of explosives in post-explosion residues.

Surface Acoustic Wave Nebulisation Mass Spectrometry for the Fast and Highly Sensitive Characterisation of Synthetic Dyes in Textile Samples.

Surface acoustic wave nebulisation (SAWN) mass spectrometry (MS) is a method to generate gaseous ions compatible with direct MS of minute samples at femtomole sensitivity. To perform SAWN, acoustic waves are propagated through a LiNbO3 sampling chip, and are conducted to the liquid sample, which ultimately leads to the generation of a fine mist containing droplets of nanometre to micrometre diameter. Through fission and evaporation, the droplets undergo a phase change from liquid to gaseous analyte ions in a non-destructive manner. We have developed SAWN technology for the characterisation of organic colourants in textiles. It generates electrospray-ionisation-like ions in a non-destructive manner during ionisation, as can be observed by the unmodified chemical structure. The sample size is decreased by tenfold to 1000-fold when compared with currently used liquid chromatography-MS methods, with equal or better sensitivity. This work underscores SAWN-MS as an ideal tool for molecular analysis of art objects as it is non-destructive, is rapid, involves minimally invasive sampling and is more sensitive than current MS-based methods. Graphical Abstract ᅟ.

Characterisation and determination of fullerenes: A critical review.

A prominent sector of nanotechnology is occupied by a class of carbon-based nanoparticles known as fullerenes. Fullerene particle size and shape impact in how easily these particles are transported into and throughout the environment and living tissues. Currently, there is a lack of adequate methodology for their size and shape characterisation, identification and quantitative detection in environmental and biological samples. The most commonly used methods for their size measurements (aggregation, size distribution, shape, etc.), the effect of sampling and sample treatment on these characteristics and the analytical methods proposed for their determination in complex matrices are discussed in this review. For the characterisation and analysis of fullerenes in real samples, different analytical techniques including microscopy, spectroscopy, flow field-flow fractionation, electrophoresis, light scattering, liquid chromatography and mass spectrometry have been reported. The existing limitations and knowledge gaps in the use of these techniques are discussed and the necessity to hyphenate complementary ones for the accurate characterisation, identification and quantitation of these nanoparticles is highlighted.

Characterization of aggregates of surface modified fullerenes by asymmetrical flow field-flow fractionation with multi-angle light scattering detection.

Fullerenes are carbon nanoparticles with widespread biomedical, commercial and industrial applications. Attributes such as their tendency to aggregate and aggregate size and shape impact their ability to be transported into and through the environment and living tissues. Knowledge of these properties is therefore valuable for their human and environmental risk assessment as well as to control their synthesis and manufacture. In this work, asymmetrical flow-field flow fractionation (AF4) coupled to multi-angle light scattering (MALS) was used for the first time to study the size distribution of surface modified fullerenes with both polyhydroxyl and carboxyl functional groups in aqueous solutions having different pH (6.5-11) and ionic strength values (0-200mM) of environmental relevance. Fractionation key parameters such as flow rates, flow programming, and membrane material were optimized for the selected fullerenes. The aggregation of the compounds studied appeared to be indifferent to changes in solution pH, but was affected by changes in the ionic strength. Polyhydroxy-fullerenes were found to be present mostly as 4nm aggregates in water without added salt, but showed more aggregation at high ionic strength, with an up to 10-fold increase in their mean hydrodynamic radii (200mM), due to a decrease in the electrostatic repulsion between the nanoparticles. Carboxy-fullerenes showed a much stronger aggregation degree in water (50-100nm). Their average size and recoveries decreased with the increase in the salt concentration. This behavior can be due to enhanced adsorption of the large particles to the membrane at high ionic strength, because of their higher hydrophobicity and much larger particle sizes compared to polyhydroxy-fullerenes. The method performance was evaluated by calculating the run-to-run precision of the retention time (hydrodynamic radii), and the obtained RSD values were lower than 1%. MALS measurements showed aggregate sizes that were in good agreement with the AF4 data. A comparison of the scattering radii from the MALS with the hydrodynamic radii obtained from the retention times in AF4 indicated that the aggregate shapes are far from spherical. TEM images of the fullerenes in the dry state also showed branched and irregular clusters.

Analysis of C60-fullerene derivatives and pristine fullerenes in environmental samples by ultrahigh performance liquid chromatography-atmospheric pressure photoionization-mass spectrometry.

In this work, a method is proposed for the simultaneous analysis of several pristine fullerenes (C60, C70, C76, C78, and C84) and three C60-fullerene derivatives (N-methyl fulleropyrrolidine, [6,6]-phenyl C61 butyric acid methyl ester and [6,6]-phenyl C61 butyric acid butyl ester) in environmental samples. The method involves the use of ultrahigh performance liquid chromatography coupled to atmospheric pressure photoionization mass spectrometry (UHPLC-APPI-MS) and allowed the chromatographic separation in less than 4.5min. The product ions from tandem mass spectrometry studies of fullerene derivatives were characterized and the most abundant one (m/z 720), corresponding to [C60](-), was selected for quantitation. Selected reaction monitoring (SRM at 0.7m/z FWHM) by acquiring two transitions using both isotopic cluster ions [M](-) and [M+1](-) as precursor ions was proposed for quantitation and confirmation purposes. For pristine fullerenes, highly selective selected ion monitoring (H-SIM) acquisition mode by monitoring the isotopic cluster ions [M](-) and [M+1](-) was used. Pressurized solvent extraction conditions were optimized in order to improve recoveries of the studied fullerene compounds from sediment samples. Values up to 87-92% for C60-fullerene derivatives and lower but still acceptable, 70-80%, for pristine fullerenes were obtained. Method limits of quantitation (MLOQs) ranging from 1.5pgL(-1) to 5.5ngL(-1) in water samples and from 0.1ngkg(-1) to 523ngkg(-1) in sediments were obtained with good precision (relative standard deviations always lower than 13%). The applicability of the developed method was evaluated by analyzing several environmental samples such as sediments and pond water and the detected levels for C60-fullerene derivatives were of 0.1-2.7ngkg(-1) and 1.5-8.5pgL(-1), respectively. C60 and C70 were the only pristine fullerenes detected in the analyzed samples (0.1-7.2ngkg(-1) in sediments and 9-330pgL(-1) in water pond samples).