Rapidly Dissolving Trans-scleral Microneedles for Intraocular Delivery of Cyclosporine A.

Cyclosporine A (CsA) is a cyclic peptide immunosuppressant drug that is beneficial in the treatment of various ocular diseases. However, its ocular bioavailability in the posterior eye is limited due to its poor aqueous solubility. Conventional CsA formulations such as a solution or emulsion permeate poorly across the eye due to various static and dynamic barriers of the eye. Dissolvable microneedle (MN)-based patches can be used to overcome barrier properties and, thus, enhance the ocular bioavailability of CsA in the posterior eye. CsA-loaded dissolvable MN patches were fabricated using polyvinylpyrrolidone (PVP) and characterized for MN uniformity and sharpness using SEM. Further characterization for its failure force, penetration force, and depth of penetration were analyzed using a texture analyzer. Finally, the dissolution time, ex vivo permeation, and ocular distribution of cyclosporine were determined in isolated porcine eyes. PVP MNs were sharp, uniform with good mechanical properties, and dissolved within 5 min. Ocular distribution of CsA in a whole porcine eye perfusion model showed a significant increase of CsA levels in various posterior segment ocular tissues as compared to a topically applied ophthalmic emulsion (Restasis®) (P < 0.001). Dissolving MNs of CsA were prepared, and the MN arrays can deliver CsA to the back of the eye offering potential for treating various inflammatory diseases.

Gentamicin Eluting 3D-Printed Implants for Preventing Post-Surgical Infections in Bone Fractures.

A surgically implantable device is an inevitable treatment option for millions of people worldwide suffering from diseases arising from orthopedic injuries. A global paradigm shift is currently underway to tailor and personalize replacement or reconstructive joints. Additive manufacturing (AM) has provided dynamic outflow to the customized fabrication of orthopedic implants by enabling need-based design and surface modification possibilities. Surgical grade 316L Stainless Steel (316L SS) is promising with its cost, strength, composition, and corrosion resistance to fabricate 3D implants. This work investigates the possibilities of application of the laser powder bed fusion (L-PBF) technique to fabricate 3D-printed (3DP) implants, which are functionalized with a multilayered antimicrobial coating to treat potential complications arising due to postsurgical infections (PSIs). Postsurgical implant-associated infection is a primary reason for implantation failure and is complicated mainly by bacterial colonization and biofilm formation at the installation site. PLGA (poly-d,l-lactide-co-glycolide), a biodegradable polymer, was utilized to impart multiple layers of coating using the airbrush spray technique on 3DP implant surfaces loaded with gentamicin (GEN). Various PLGA-based polymers were tested to optimize the ideal lactic acid: glycolic acid ratio and molecular weight suited for our investigation. 3D-Printed PLGA-GEN substrates sustained the release of gentamicin from the surface for approximately 6 weeks. The 3DP surface modification with PLGA-GEN facilitated cell adhesion and proliferation compared to control surfaces. The cell viability studies showed that the implants were safe for application. The 3DP PLGA-GEN substrates showed good concentration-dependent antibacterial efficacy against the common PSI pathogen Staphylococcus aureus (S. aureus) and Staphylococcus epidermidis (S. epidermidis). The GEN-loaded substrates demonstrated antimicrobial longevity and showed significant biofilm growth inhibition compared to control. The substrates offered great versatility regarding the in vitro release rates, antimicrobial properties, and biocompatibility studies. These results radiate great potential in future human and veterinary clinical applications pertinent to complications arising from PSIs, focusing on personalized sustained antibiotic delivery.

Inclusion Complex of Clomiphene Citrate with Hydroxypropyl-ß-Cyclodextrin for Intravenous Injection: Formulation and Stability Studies.

Clomiphene citrate is the first-line treatment for women with abnormal or failed ovulation. Currently, it is available as oral tablets, and the parenteral formulation does not exist. In this study, we prepared clomiphene citrate-hydroxypropyl-ß-cyclodextrin inclusion complex for its use in intravenous injection. The inclusion complex was characterized in the liquid state (phase solubility) and solid state by differential scanning calorimetry, Fourier transform infrared spectroscopy, and nuclear magnetic resonance spectroscopy analyses. The sterile intravenous injection containing 0.5% clomiphene citrate was prepared and characterized for its physical properties, assay, pH, and osmolality. A stability-indicating high-performance liquid chromatography (HPLC) method for the injection was developed. The HPLC method was validated for the assay, linearity, precision and repeatability, benchtop stability, and forced degradation to elute clomiphene isomers from the degradation products. The injection was packed in sterile 10-ml glass vials with butyl rubber stoppers and stored at 40°C, room temperature, and 4°C. The samples at 0, 0.5, 1, 2, 3, and 6 months were analyzed for clarity, pH, osmolality, and drug assay. The HPLC method was linear (R2 = 0.9999), precise (0.86% relative standard deviation), and stability indicating. The stability data at the accelerated (40°C) storage condition for 6 months showed satisfactory results: the drug assay in the injection was between 90 and 105%, the injection remained clear, pH was between 4.0 and 4.4, and osmolality was between 270 and 350 mOsm. The stability data suggests that the product is stable and meets the given analytical specifications.

Percutaneous absorption and Skin accumulation of Lorazepam-Diphenhydramine- Haloperidol Carbopol gel in Porcine Ear Skin.

This study presents the formulation and evaluation of an ABH Carbopol gel containing lorazepam (Ativan®), diphenhydramine hydrochloride (Benadryl®), and haloperidol (Haldol®) for treating chemotherapy-induced nausea and vomiting (CINV) in hospice patients. ABH PLO gel is widely used for this purpose due to its low cost and presumed efficacy. However, previous studies, including one conducted by the authors, have reported insufficient drug absorption from the ABH PLO gel. Here we hypothesized that the ABH Carbopol gel would provide superior percutaneous absorption of the drugs. ABH Carbopol gel was characterized for pH, viscosity, thermal properties, and infrared spectroscopy. The percutaneous absorption and skin retention of the gel was evaluated across porcine ear skin using Franz diffusion cells, and the drug concentrations were determined by high-performance liquid chromatography. The pH of the ABH Carbopol gel was found to be 6.80 ± 0.33, and the retention time of diphenhydramine, haloperidol, and lorazepam were 4.73, 7.11, and 18.69 minutes, respectively. The thermogram of the ABH Carbopol gel indicates the drugs were present in the dissolved state. Based on the flux data, the estimated steady-state concentration (Css) of diphenhydramine, haloperidol, and lorazepam were found to be 44.64 ng/ml, 2.58 ng/ml, and 20.1 ng/ml, respectively. These values were significantly higher than those obtained from the ABH PLO gel. In conclusion, the ABH Carbopol gel provides a promising alternative to the ABH PLO gel for treating CINV in hospice patients. Further studies are required to validate these findings in clinical settings.

3D-Printed Capsaicin-Loaded Injectable Implants for Targeted Delivery in Obese Patients.

Diet-induced obesity and hyperlipidemia are a growing public health concern leading to various metabolic disorders. Capsaicin, a major bioactive compound obtained from natural chili peppers, has demonstrated its numerous beneficial roles in treating obesity and weight loss. Current treatment involves either administration of antiobesity drugs or surgical procedures such as Roux-en-Y-gastric bypass or sleeve gastrectomy, both of which are associated with serious side effects and poor patient acceptance. Capsaicin, a pungent molecule, has low oral bioavailability. Therefore, there is a need for the development of site-specific drug delivery system for capsaicin. The present study is aimed at preparing and characterizing 3D-printed capsaicin-loaded rod-shaped implants by thermoplastic extrusion-based 3D printing technology. The implants were printed with capsaicin-loaded into a biodegradable polymer, polycaprolactone, at different drug loadings and infill densities. The surface morphology revealed a smooth and uniform external surface without any capsaicin crystals. DSC thermograms showed no significant changes/exothermic events among the blends suggesting no drug polymer interactions. The in vitro release studies showed a biphasic release profile for capsaicin, and the release was sustained for more than three months (~ 85% released) irrespective of drug loading and infill densities. The HPLC method was stability-indicating and showed good resolution for its analogs, dihydrocapsaicin and nordihydrocapsaicin. The implants were stable for three months at accelerated conditions (40°C) without any significant decrease in the assay of capsaicin. Therefore, capsaicin-loaded implants can serve as a long-acting injectable formulation for targeting the adipose tissue region in obese patients.

Cardiolipin for Enhanced Cellular Uptake and Cytotoxicity of Thermosensitive Liposome-Encapsulated Daunorubicin toward Breast Cancer Cell Lines.

Daunorubicin (DNR) and cardiolipin (CL) were co-delivered using thermosensitive liposomes (TSLs). 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1-myristoyl-2-stearoyl-sn-glycero-3-phosphocholine (MSPC), cholesterol, 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] or DSPE-mPEG (2000) and CL were used in the formulation of liposomes at a molar ratio of 57:40:30:3:20, respectively. CL forms raft-like microdomains that may relocate and change lipid organization of the outer and inner mitochondrial membranes. Such transbilayer lipid movement eventually leads to membrane permeabilization. TSLs were prepared by thin-film hydration (drug:lipid ratio 1:5) where DNR was encapsulated within the aqueous core of the liposomes and CL acted as a component of the lipid bilayer. The liposomes exhibited high drug encapsulation efficiency (>90%), small size (~115 nm), narrow size distribution (polydispersity index ~0.12), and a rapid release profile under the influence of mild hyperthermia. The liposomes also exhibited ~4-fold higher cytotoxicity against MDA-MB-231 cells compared to DNR or liposomes similar to DaunoXome® (p < 0.001). This study provides a basis for developing a co-delivery system of DNR and CL encapsulated in liposomes for treatment of breast cancer.

Hispolon Cyclodextrin Complexes and Their Inclusion in Liposomes for Enhanced Delivery in Melanoma Cell Lines.

Hispolon, a phenolic pigment isolated from the mushroom species Phellinus linteus, has been investigated for anti-inflammatory, antioxidant, and anticancer properties; however, low solubility and poor bioavailability have limited its potential clinical translation. In this study, the inclusion complex of hispolon with Sulfobutylether-ß-cyclodextrin (SBEßCD) was characterized, and the Hispolon-SBEßCD Complex (HSC) was included within the sterically stabilized liposomes (SL) to further investigate its anticancer activity against melanoma cell lines. The HSC-trapped-Liposome (HSC-SL) formulation was investigated for its sustained drug delivery and enhanced cytotoxicity. The inclusion complex in the solid=state was confirmed by a Job's plot analysis, molecular modeling, differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), Proton nuclear magnetic resonance (NMR) spectroscopy, and scanning electron microscopy (SEM). The HSC-SL showed no appreciable deviation in size (<150 nm) and polydispersity index (<0.2) and improved drug encapsulation efficiency (>90%) as compared to control hispolon liposomes. Individually incorporated hispolon and SBEßCD in the liposomes (H-CD-SL) was not significant in loading the drug in the liposomes, compared to HSC-SL, as a substantial amount of free drug was separated during dialysis. The HSC-SL formulation showed a sustained release compared to hispolon liposomes (H-SLs) and Hispolon-SBEßCD liposomes (H-CD-SLs). The anticancer activity on melanoma cell lines (B16BL6) of HSC and HSC-SL was higher than in H-CD-SL and hispolon solution. These findings suggest that HSC inclusion in the HSC-SL liposomes stands out as a potential formulation approach for enhancing drug loading, encapsulation, and chemotherapeutic efficiency of hispolon and similar water insoluble drug molecules.

Lysinated Multiwalled Carbon Nanotubes with Carbohydrate Ligands as an Effective Nanocarrier for Targeted Doxorubicin Delivery to Breast Cancer Cells.

Multiwalled carbon nanotubes (MWCNTs) are elongated, hollow cylindrical nanotubes made of sp2 carbon. MWCNTs have attracted significant attention in the area of drug delivery due to their high drug-loading capacity and large surface area. Furthermore, they can be linked to bioactive ligands molecules via covalent and noncovalent bonds that allow for the targeted delivery of anticancer drugs such as doxorubicin. The majority of methodologies reported for the functionalization of MWCNTs for drug delivery are quite complex and use expensive linkers and ligands. In the present study, we report a simple, cost-effective approach for functionalizing MWCNTs with the carbohydrate ligands, galactose (GA), mannose (MA) and lactose (LA), using lysine as a linker. The doxorubicin (Dox)-loaded functionalized MWCNTs were characterized using FT-IR, NMR, Raman, XRD and FE-SEM. The drug-loaded MWCNTs were evaluated for drug loading, drug release and cell toxicity in vitro, in breast cancer cells. The results indicated that the carbohydrate-modified lysinated MWCNTs had greater Dox loading capacity, compared to carboxylated MWCNTs (COOHMWCNTs) and lysinated MWCNTs (LyMWCNTs). In vitro drug release experiments indicated that the carbohydrate functionalized LyMWCNTs had higher Dox release at pH 5.0, compared to the physiological pH of 7.4, over 120 h, indicating that they are suitable candidates for targeting the tumor microenvironment as a result of their sustained release profile of Dox. Doxorubicin-loaded galactosylated MWCNTs (Dox-GAMWCNTs) and doxorubicin loaded mannosylated MWCNTs (Dox-MAMWCNTs) had greater anticancer efficacy and cellular uptake, compared to doxorubicin-loaded lactosylated MWCNTs (Dox-LAMWCNTs) and pure Dox, in MDA-MB231 and MCF7 breast cancer cells. However, neither the ligand conjugated multiwall blank carbon nanotubes (GAMWCNTs, MAMWCNTs and LAMWCNTs) nor the lysinated multiwalled blank carbon nanotubes produced significant toxicity in the normal cells. Our results suggest that sugar-tethered multiwalled carbon nanotubes, especially the galactosylated (Dox-GAMWCNTs) and mannosylated (Dox-MAMWCNTs) formulations, may be used to improve the targeted delivery of anticancer drugs to breast cancer cells.

Niosomal formulation of hydroxytyrosol, a polyphenolic antioxidant, for enhancing transdermal delivery across human cadaver skin.

Hydroxytyrosol (HT), a naturally occurring polyphenol from the olive plant, is a potent antioxidant, cardioprotective, neuroprotective, and anti-inflammatory agent. Upon oral administration, HT undergoes rapid elimination within minutes and thus limiting its therapeutic utility. Due to its hydrophilic nature, percutaneous absorption and transdermal delivery of HT are very low. The aim of this research was to enhance the skin permeation of hydroxytyrosol using a niosome gel formulation. The formulations prepared with Span 60 as surfactant showed uniform particle size and high encapsulation efficiency (>90%). The niosome formulations showed a pseudoplastic behavior for topical application within the lipid/surfactant composition of 45-50%. The formulations showed a controlled release of HT compared to the HT solution. The flux of HT across human skin was increased by 28 and 4.4 fold compared to aqueous and ethanolic HT solutions, respectively (p < 0.001). The presence of lecithin lowered the flux and increased the retention of the formulations compared to HT solutions (p < 0.001). The formulations containing lecithin showed two-fold higher skin retention of hydroxytyrosol (p < 0.05). In conclusion, this study demonstrates niosome gel as a promising alternative to oral delivery of HT, providing sustained delivery and greater efficacy.

Enhanced Topical Co-delivery of Acyclovir and Lidocaine Gel Formulation Across Dermatomed Human Skin.

Acyclovir a widely used drug in the treatment of herpes simplex virus (HSV) infections and lidocaine a local anesthetic were combined in a topical gel formulation. The topical gel with Transcutol P (TP) or N-methyl 2-pyrrolidone (NMP) was prepared and tested for in vitro skin permeation across the intact and microneedle-treated human cadaver skin. The topical gels containing 5% each of acyclovir and lidocaine showed optimal pH, spreadability, and 100% drug release. The transdermal flux and skin retention of the gels were significantly higher compared to Generic 5% acyclovir ointment (Zovirax) (p < 0.001), and 5% lidocaine gel (numb gel) (p < 0.05). As expected, topical gels showed a very high increase in the skin permeation across microporated skin versus intact skin. In viral infections, skin is inflamed, and barrier integrity may be disrupted. The results of the present study are significant because the co-delivery formulation showed a very high increase in the skin permeation across intact and microporated skin (versus respective commercial formulations). The results of this study demonstrate enhanced co-delivery of acyclovir and lidocaine in a topical formulation across skin (intact or barrier compromised) for the treatment of herpes virus infections.

Stability-indicating HPLC method for acyclovir and lidocaine in topical formulations.

A simple, rapid and accurate stability-indicating HPLC assay was developed for the determination of acyclovir and lidocaine in topical formulations. Chromatographic separation of acyclovir and lidocaine was achieved using a reversed-phase C18 column and a gradient mobile phase (20 mm ammonium acetate pH 3.5 in water and acetonitrile). The degradation products of acyclovir and lidocaine in the samples were analyzed by ultra performance liquid chromatography-time of flight mass spectrometry. The HPLC method successfully resolved the analytes from the impurities and degradation products in the topical formulation. Furthermore, the method detected the analytes from the human skin leachables following the extraction of the analytes in the skin homogenate samples. The method showed linearity over wide ranges of 5-500 and 10-200 µg/ml for acyclovir and lidocaine in the topical product, respectively, with a correlation coefficient (r2 ) >0.9995. The relative standard deviations for precision, repeatability, and robustness of the method validation assays were <2%. The skin extraction efficiency for acyclovir and lidocaine was 92.8 ± 0.7% and 91.3 ± 3.2%, respectively, with no interference from the skin leachables. Thus, simultaneous quantification of acyclovir and lidocaine in the topical formulations was achieved.

Co-Delivery of Hispolon and Doxorubicin Liposomes Improves Efficacy Against Melanoma Cells.

Hispolon is a small molecular weight polyphenol that has antioxidant, anti-inflammatory, and anti-proliferative activities. Our recent study has demonstrated hispolon as a potent apoptosis inducer in melanoma cell lines. Doxorubicin is a broad spectrum first-line treatment for various kinds of cancers. In this study, co-delivery of doxorubicin and hispolon using a liposomal system in B16BL6 melanoma cell lines for synergistic cytotoxic effects was investigated. Liposomes were prepared using a lipid film hydration method and loaded with doxorubicin or hispolon. The formulations were characterized for particle size distribution, release profile, and encapsulation efficiency (EE). In addition, in vitro cytotoxicity, in vitro cell apoptosis, and cellular uptake were evaluated. Liposomes exhibited small particle size (mean diameter ~ 100 nm) and narrow size distribution (polydispersity index (< 0.2) and high drug EE% (> 90%). The release from liposomes showed slower release compared to free drug solution as an additional time required for the release of drug from the liposome lipid bilayer. Liposome loaded with doxorubicin or hispolon exhibited significantly higher cytotoxicity against B16BL6 melanoma cells as compared to doxorubicin solution or hispolon solution. Likewise, co-delivery of hispolon and doxorubicin liposomes showed two-fold and three-fold higher cytotoxicity, as compared to hispolon liposomes or doxorubicin liposomes, respectively. In addition, co-delivery of doxorubicin and hispolon in liposomes enhanced apoptosis more than the individual drugs in the liposome formulation. In conclusion, the co-delivery of hispolon and doxorubicin could be a promising therapeutic approach to improve clinical outcomes against melanoma.

Use of sorbitol as pharmaceutical excipient in the present day formulations - issues and challenges for drug absorption and bioavailability.

Sorbitol is a popular sugar alcohol which has been used as an excipient in formulations of various drugs. Although from a safety perspective the presence of sorbitol in drug formulations does not raise a concern, reports have emerged and these suggest that sorbitol in drug formulations may alter oral absorption and bioavailability of certain drugs. The focus of this article was to review the published literature of various drugs where pharmacokinetic data has been reported for the drug alone versus drug administered with sorbitol and provide perspectives on the pharmacokinetic findings. Interestingly, for BCS class I drugs such as theophylline, metoprolol, the oral absorption, and bioavailability were generally not affected by sorbitol. However, theophylline oral absorption and bioavailability were decreased when sustained release formulation was used in place of immediate release formulation. For drugs such as risperidone (BCS class II) and lamivudine and ranitidine (BCS class III), the solution formulations showed diminished oral bioavailability in presence of sorbitol, whereas cimetidine and acyclovir (BCS class III), did not show any changes in pharmacokinetic profiles due to sorbitol. Finally, the presence of activated charcoal with sorbitol showed different pharmacokinetic outcome for BCS class I and II drugs.

Co-delivery of Doxorubicin and Ceramide in a Liposomal Formulation Enhances Cytotoxicity in Murine B16BL6 Melanoma Cell Lines.

This study reports co-delivery of doxorubicin (DOX) and ceramide in a liposomal system in B16BL6 melanoma cell lines for enhanced cytotoxic effects. Different types of ceramides (C6-ceramide, C8-ceramide, and C8-glucosylceramide) and lipids (1,2-dioleoyl-3-trimethylammonium-propane (DOTAP), 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC), 1,2-distearoyl-sn-glycero-3-phosphoethanolamine (DSPE)) were considered in the preparation of liposomes. DOX was encapsulated within liposome, and ceramide was used as the component of the lipid bilayer. The formulations were optimized for size and size distribution, zeta potential, and DOX encapsulation efficiency (EE). Cytotoxic effect on B16BL6 melanoma cell lines was measured by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The ceramide based liposome formulations generally provided a mean diameter < 181 nm, a zeta potential, + 35 mV, and EE > 90% DOX EE. Co-delivery of DOX and C8-ceramide with DOTAP liposomes demonstrated significantly higher cytotoxicity as compared to DOX liposomes without ceramide (P < 0.001), and also showed enhanced cellular uptake by B16BL6 cell lines. This study provides basis for developing a co-delivery system of DOX and ceramide for lowering the dose and dose-related side effects of DOX for the treatment of melanoma.

Role of Ceramides in Drug Delivery.

Ceramides belong to the sphingolipid group of lipids, which serve as both intracellular and intercellular messengers and as regulatory molecules that play essential roles in signal transduction, inflammation, angiogenesis, and metabolic disorders such as diabetes, neurodegenerative diseases, and cancer cell degeneration. Ceramides also play an important structural role in cell membranes by increasing their rigidity, creating micro-domains (rafts and caveolae), and altering membrane permeability; all these events are involved in the cell signaling. Ceramides constitute approximately half of the lipid composition in the human skin contributing to barrier function as well as epidermal signaling as they affect both proliferation and apoptosis of keratinocytes. Incorporation of ceramides in topical preparations as functional lipids appears to alter skin barrier functions. Ceramides also appear to enhance the bioavailability of drugs by acting as lipid delivery systems. They appear to regulate the ocular inflammation signaling, and external ceramides have shown relief in the anterior and posterior eye disorders. Ceramides play a structural role in liposome formulations and enhance the cellular uptake of amphiphilic drugs, such as chemotherapies. This review presents an overview of the various biological functions of ceramides, and their utility in topical, oral, ocular, and chemotherapeutic drug delivery.

Non-alcoholic Steatohepatitis (NASH) Drug Discovery - Building a Consensus on ADME Screening Tools and Clinical Pharmacology Strategies to Aid Candidate Development.

Number of drugs with different mechanisms of actions is undergoing clinical trials for non-alcoholic steatohepatitis (NASH). Given the complexity of the disease with respect to pathophysiology in the liver and associated changes in the renal function, it becomes apparent that a clear ADME (absorption, distribution, metabolism and excretion) strategy needs to be put in place for a successful nomination of a drug candidate for NASH. This review discusses using in vitro and in vivo ADME screens to understand the properties of drugs and to establish whether or not the chosen drug(s) can overcome the challenges related hepatic and renal transporters covering both uptake and efflux mechanisms imposed by NASH. A complete panel of in vivo preclinical experiments including a 14C-labeled study are proposed in NASH animal models to delineate the problematic areas for early drug development. Furthermore, a framework is provided with respect to the clinical pharmacology studies early in clinical development to characterise in an unbiased manner, the altered pharmacokinetics of drug in NASH patients for optimizing the dose selection for late phase clinical development. Because NASH patients have other co-morbid conditions and are prescribed co-medications for treating blood pressure, type 2 diabetes mellitus, obesity, dyslipidemia and many more disorders, it is also suggested to examine the drug-drug interaction potential by performing a cocktail probe study to cover a broad range of cytochrome P450 (CYP) enzymes and transporters.

Reappraisal and perspectives of clinical drug-drug interaction potential of α-glucosidase inhibitors such as acarbose, voglibose and miglitol in the treatment of type 2 diabetes mellitus.

1. Amidst the new strategies being developed for the management of type 2 diabetes mellitus (T2DM) with both established and newer therapies, alpha glucosidase inhibitors (AGIs) have found a place in several treatment protocols. 2. The objectives of the review were: (a) to compile and evaluate the various clinical pharmacokinetic drug interaction data for AGIs such as acarbose, miglitol and voglibose; (b) provide perspectives on the drug interaction data since it encompasses coadministered drugs in several key areas of comorbidity with T2DM. 3. Critical evaluation of the interaction data suggested that the absorption and bioavailability of many coadministered drugs were not meaningfully affected from a clinical perspective. Therefore, on the basis of the current appraisal, none of the AGIs showed an alarming and/or overwhelming trend of interaction potential with several coadministered drugs. Hence, dosage adjustment is not warranted in the use of AGIs in T2DM patients in situations of comorbidity. 4. The newly evolving fixed dose combination strategies with AGIs need to be carefully evaluated to ensure that the absorption and bioavailability of the added drug are not impaired due to concomitant food ingestion.

Evaluation of non-crystalline cellulose as a novel excipient in solid dose products.

OBJECTIVE: The objective of this study was to evaluate non-crystalline cellulose (NCC) as a novel tablet excipient in solid oral dosage forms in comparison with microcrystalline cellulose (MCC) and silicified microcrystalline cellulose (Prosolv®, SMCC). SIGNIFICANCE: MCC, although a widely used tablet excipient, has diasdvantages in terms of its low dilution potential for potent drugs, and sensitivity to lubricant and moisture. SMCC, a modified version of MCC, has improved tablet compression properties. However, SMCC is expensive and also affects the moisture sorption and particle deformation during compression leading to increased tensile strength and tablet hardness. NCC was found to be similar to SMCC in its performance as a tablet excipient and thus can serve as a cheaper alternative to SMCC. METHODS: Scanning electron microscopy (SEM), X-ray diffrectometry (XRD), and differential scanning calorimetry (DSC) analyses were performed on NCC, MCC, and SMCC. Further, out-of-the die Heckel, Kawakita compact densification and stress-strain analyses were performed to evaluate their compaction and compressibility properties. Various compendial and non-compendial tests were performed to to determine the flow properties of materials. Dissolution studies were performed using amlodipine besylate as a marker drug. RESULTS: It was found that NCC has similar or even better flow properties and compactibility than MCC due to its porous and amorphous structure whereas it had similar properties as SMCC. CONCLUSIONS: Based on the data, it can be concluded that NCC can serve as a cheaper and better alternative to MCC as excipient in solid dosage forms.

Comparative pharmacokinetics of three SGLT-2 inhibitors sergliflozin, remogliflozin and ertugliflozin: an overview.

1. Several sodium-glucose cotransporter-2 (SGLT-2) inhibitors are in clinical use for the management of type 2 diabetes. The objectives of the current review were: (a) to provide a comparative pharmacokinetics including absorption, distribution, metabolism and excretory (ADME) profiles of three SGLT-2 inhibitors namely: sergliflozin, remogliflozin and ertugliflozin; (b) to provide some perspectives on possible developmental issues. 2. Based on the half-life (t1/2) values observed in humans, the rank order of the three SGLT-2 inhibitors was ertugliflozin (16 h) > remogliflozin (2-4 h) > sergliflozin (1-1.5 h). Therefore, while once a day dosing of ertugliflozin is possible, the other two drugs need to be dosed more frequently. Perhaps, the short t1/2 of sergliflozin may have contributed for its discontinuation. 3. Although there was paucity of published data on the metabolism, transporter related and excretory aspects for sergliflozin, the other two drugs provided a differentiating profile. However, the compiled data suggested that there may be a minimal or no risk of pharmacokinetic drug interaction issues associated with any of the reviewed drugs. 4. Because of the crowded development pipeline and approved SGLT-2 inhibitors, the safety and efficacy of sergliflozin, remogliflozin and ertugliflozin appear to be a key from differentiation perspective.

Stability-indicating HPLC assay for lysine-proline-valine (KPV) in aqueous solutions and skin homogenates.

A simple, sensitive and stability-indicating high-performance liquid chromatographic (HPLC) assay method was developed and validated for a bioactive peptide, lysine-proline-valine (KPV) in aqueous solutions and skin homogenates. Chromatographic separation was achieved on a reversed phase Phenomenex C18 column (4.6 × 250 mm, packed with 5 µm silica particles) with a gradient mobile phase consisting of 0.1% trifluoroacetic acid (TFA) in water (A) and 0.1% TFA in acetonitrile (B). The proposed HPLC method was validated with respect to accuracy, precision, linearity, repeatability, limit of detection (LOD) and limit of quantitation (LOQ). The calibration curve was linear with a correlation coefficient (r) of 0.9999. Relative standard deviation values of accuracy and precision experiments were <2. The LOD and LOQ of KPV were 0.01 and 0.25 µg/mL, respectively. Under stress conditions (acid, alkali and hydrogen peroxide) KPV yielded lys-pro-diketopiperazine as major degradation product, which was identified by flow injection MS analysis. The developed HPLC method was found to be efficient in separating the active peptide from its degradation products generated under various stress conditions. Also, the validated method was able to separate KPV from other peaks arising from endogenous components of the skin homogenate.