RESUMO
In the present work, we propose a simple and unique approach to design a lightweight, low-cost, self-charging power cell with considerable capacity to generate and store photocharges named self-charged photo-power cell (SCPPC). Initially, highly electroactive sodium dodecyl sulfate (SDS)-incorporated poly(vinylidene fluoride) (PVDF) composite thin films with a large dielectric constant of â¼525 are synthesized via a simplistic solution casting process. Then, the as-prepared high-dielectric SDS/PVDF thin film is used as a charge-storage medium in combination with an inorganic-organic dye film, i.e., ZnO nanoparticles-eosin Y-poly(vinylpyrrolidone) film, as a photoelectron generator in our SCPPC. An open-circuit voltage of â¼1.2 V is attained after charging SCPPC under illumination light with intensity â¼110 mW/cm2 and then discharging fully with a constant current density of â¼4.5 mA/cm2. A specific areal capacitance of â¼450 F/m2 is obtained with large energy and power densities of â¼90 mWh/m2 and 54 W/m2, respectively. The improved overall efficiency, â¼3.78%, along with 89% storage efficiency leads to promising application possibilities of our rechargeable photo-power cell. The recyclability, i.e., rechargeability and storage durability, of the photo-power cell are also checked for 35 days without no such reduction in voltage generation and storage. Also, multicolored light-emitting diodes are lightened up using the photo-power cell as power source.
RESUMO
Herein, biocompatible Ca3(PO4)2 nanorod-incorporated poly(vinylidene) difluoride films have been prepared via an in situ process. A good piezoelectricity (d33 ≈ 56.6 pC/N) along with a large dielectric constant of â¼3.48 × 105 at frequency 20 Hz has been achieved. Then, we have designed a biocompatible, highly durable, low-cost piezoelectric nanogenerator (CPNG) which shows the superiority in open-circuit voltage â¼47 V and current â¼1.8 µA generation with power density â¼47.4 mW cm-3 under the gentle touch of a finger. Excellent mechanical to electrical energy conversion efficiency (â¼65.5%) of our developed CPNG leads to fast charging of a capacitor of 1 µF in 18 s and glowing of 26 light-emitting diodes (LEDs) under finger impartation. Further, a portable light-charging power pack (LCPP) has been developed using the high dielectric film as the storage function. Under light illumination, our LCPP generates open-circuit output voltage â¼1.29 V with short-circuit current 5.7 mA cm-2. Areal capacitance â¼1779 F m-2 and storage efficiency â¼88% are achieved. The device is able to lighten up 22 LEDs for 10 days after charging once.
RESUMO
A biocompatible poly(vinylidene) difluoride (PVDF) based film has been prepared by in situ precipitation of calcium phosphate precursors. Such films were surface absorbed with two essential oils namely eucalyptus and tea tree oil. Physico-chemical characterization of the composite film revealed excellent stability of the film with 10% loading of oils in the PVDF matrix. XRD, FTIR and FESEM measurements confirmed the presence of hydroxyapatite and octacalcium phosphate in the PVDF matrix which showed predominantly ß phase. Strong bactericidal activity was observed with very low minimum bactericidal concentration (MBC) values on both E. coli and S. aureus. The composite films also resisted biofilm formation as observed by FESEM. The release of essential oils from the film showed an initial burst followed by a very slow release over a period of 24 hours. Antibacterial action of the film was found to be primarily due to the action of essential oils which resulted in leakage of vital fluids from the microorganisms. Both necrotic and apoptotic morphologies were observed in bacterial cells. Biocompatibility studies with the composite films showed negligible cytotoxicity to mouse mesenchymal and myoblast cells at MBC concentration.
RESUMO
A simple and low cost in situ process has been developed to synthesize Fe2O3-Co3O4 nanoparticles (NPs) loaded poly(vinylidene fluoride) (PVDF) thin films. The electroactive ß phase nucleation mechanism and the dielectric properties of the films have been investigated by X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry and using an LCR meter. Results confirmed that the electroactive ß phase crystallization in the PVDF matrix is due to the fast nucleating or catalytic effect of the in situ NPs. Homogenous dispersion of in situ Fe2O3-Co3O4 NPs in the polymer matrix leads to strong interfacial interaction between the NPs and the polymer resulting in enhanced ß phase nucleation in PVDF and a large dielectric constant of the thin films. The observed variation in the electroactive ß phase nucleation by NPs (Fe2O3-Co3O4) and the dielectric properties of the thin films have been explained on the basis of surface charge, size, geometrical shape and extent of agglomeration of the NPs in the polymer matrix.
RESUMO
A facile and low cost synthesis of Ni(OH)2 nanobelt (NB) modified electroactive poly(vinylidene fluoride) (PVDF) thin films with excellent dielectric properties has been reported via in situ formation of Ni(OH)2 NBs in the PVDF matrix. The formation and morphology of the NBs are confirmed by UV-visible spectroscopy and field emission scanning electron microscopy respectively. A remarkable improvement in electroactive ß phase nucleation (â¼82%) and the dielectric constant (ε â¼ 3.1 × 10(6) at 20 Hz) has been observed in the nanocomposites (NCs). The interface between the NBs and the polymer matrix plays a crucial role in the enhancement of the electroactive ß phase and the dielectric properties of thin films. Strong interaction via hydrogen bonds between Ni(OH)2 NBs and the PVDF matrix is the main reason for enhancement in ß phase crystallization and improved dielectric properties. The NC thin films can be utilized for potential applications as high energy storage devices like supercapacitors, solid electrolyte batteries, self-charging power cells, piezoelectric nanogenerators, and thin film transistors and sensors.
Assuntos
Hidróxidos/química , Nanocompostos/química , Níquel/química , Polivinil/química , Cristalização , Impedância ElétricaRESUMO
Conventional energy sources are continuously depleting, and the world is actively seeking new green and efficient energy solutions. Enormous amounts of acoustic energy are dissipated daily, but the low intensity and limited efficiency of current harvesting techniques are preventing its adoption as a ubiquitous method of power generation. Herein, a strategic solution to increase acoustic energy harvesting efficiency using a specially designed metamaterial is implemented. A scalable transmissive labyrinthine acoustic metamaterial (LAM) is designed, developed, and employed to maximize ultrasound (40 kHz) capture over its large surface area (>27 k mm2), which is focused onto a piezoelectric film (78.6 mm2), thus magnifying incident sound pressure by 13.6 times. Three different piezoelectric films - two commercial and one lab-made nanocomposite film are tested with LAM in the acoustic energy harvesting system. An extraordinary voltage gain of 157-173% and a maximum power gain of 272% using the LAM compared to the case without the LAM are achieved. Multipoint focusing using holographic techniques, showcasing acoustic patterning to allow on-demand simultaneous harvesting in separate locations, is demonstrated. Our versatile approach for high-intensity acoustic energy harvesting opens future opportunities to exploit sound energy as a resource to contribute toward global sustainability.
RESUMO
Advanced interfacial engineering has the potential to enable the successful realization of three features that are particularly important for a variety of healthcare applications: wettability control, antimicrobial activity to reduce infection risks, and sensing of physiological parameters. Here, a sprayable multifunctional triboelectric coating is exploited as a nontoxic, ultrathin tactile sensor that can be integrated directly on the fingertips of surgical gloves. The coating is based on a polymer blend mixed with zinc oxide (ZnO) nanoparticles, which enables antifouling and antibacterial properties. Additionally, the nanocomposite is superhydrophobic (self-cleaning) and is not cytotoxic. The coating is also triboelectric and can be applied directly onto surgical gloves with printed electrodes. The sensorized gloves so obtained enable mechanical energy harvesting, force sensing, and detection of materials stiffness changes directly from fingertip, which may complement proprioceptive feedback for clinicians. Just as importantly, the sensors also work with a second glove on top offering better reassurance regarding sterility in interventional procedures. As a case study of clinical use for stiffness detection, the sensors demonstrate successful detection of pig anal sphincter injury ex vivo. This may lead to improving the accuracy of diagnosing obstetric anal sphincter injury, resulting in prompt repair, fewer complications, and improved quality of life.
Assuntos
Infertilidade , Nanocompostos , Animais , Suínos , Luvas Cirúrgicas , Tecnologia Háptica , Qualidade de Vida , Nanocompostos/químicaRESUMO
Triboelectric nanogenerators (TENGs) have emerged as a promising green technology to efficiently harvest otherwise wasted mechanical energy from the environment and human activities. However, cost-effective and reliably performing TENGs require rational integration of triboelectric materials, spacers, and electrodes. The present work reports for the first time the use of oxydation-resistant pure copper nanowires (CuNWs) as an electrode to develop a flexible, and inexpensive TENG through a potentially scalable approach involving vacuum filtration and lactic acid treatment. A â¼6 cm2 device yields a remarkable open circuit voltage (Voc) of 200 V and power density of 10.67 W m-2 under human finger tapping. The device is robust, flexible and noncytotoxic as assessed by stretching/bending maneuvers, corrosion tests, continuous operation for 8000 cycles, and biocompatibility tests using human fibroblast cells. The device can power 115 light emitting diodes (LEDs) and a digital calculator; sense bending and motion from the human hand; and transmit Morse code signals. The robustness, flexibility, transparency, and non-cytotoxicity of the device render it particularly promising for a wide range of energy harvesting and advanced healthcare applications, such as sensorised smart gloves for tactile sensing, material identification and safer surgical intervention.
Assuntos
Cobre , Nanofios , Humanos , Fenômenos Físicos , Atividades Humanas , EletrodosRESUMO
BACKGROUND: Measuring intraoperative forces in real time can provide feedback mechanisms to improve patient safety and surgical training. Previous force monitoring has been achieved through the development of specialized and adapted instruments or use designs that are incompatible with neurosurgical workflow. OBJECTIVE: To design a universal sensorised surgical glove to detect intraoperative forces, applicable to any surgical procedure, and any surgical instrument in either hand. METHODS: We created a sensorised surgical glove that was calibrated across 0 to 10 N. A laboratory experiment demonstrated that the sensorised glove was able to determine instrument-tissue forces. Six expert and 6 novice neurosurgeons completed a validated grape dissection task 20 times consecutively wearing the sensorised glove. The primary outcome was median and maximum force (N). RESULTS: The sensorised glove was able to determine instrument-tissue forces reliably. The average force applied by experts (2.14 N) was significantly lower than the average force exerted by novices (7.15 N) ( P = .002). The maximum force applied by experts (6.32 N) was also significantly lower than the maximum force exerted by novices (9.80 N) ( P = .004). The sensorised surgical glove's introduction to operative workflow was feasible and did not impede on task performance. CONCLUSION: We demonstrate a novel and scalable technique to detect forces during neurosurgery. Force analysis can provide real-time data to optimize intraoperative tissue forces, reduce the risk of tissue injury, and provide objective metrics for training and assessment.
Assuntos
Neurocirurgia , Humanos , Luvas Cirúrgicas , Procedimentos Neurocirúrgicos , Competência ClínicaRESUMO
Background and objectives: In recent decades, the rise of endovascular management of aneurysms has led to a significant decline in operative training for surgical aneurysm clipping. Simulation has the potential to bridge this gap and benchtop synthetic simulators aim to combine the best of both anatomical realism and haptic feedback. The aim of this study was to validate a synthetic benchtop simulator for aneurysm clipping (AneurysmBox, UpSurgeOn). Methods: Expert and novice surgeons from multiple neurosurgical centres were asked to clip a terminal internal carotid artery aneurysm using the AneurysmBox. Face and content validity were evaluated using Likert scales by asking experts to complete a post-task questionnaire. Construct validity was evaluated by comparing expert and novice performance using the modified Objective Structured Assessment of Technical Skills (mOSATS), developing a curriculum-derived assessment of Specific Technical Skills (STS), and measuring the forces exerted using a force-sensitive glove. Results: Ten experts and eighteen novices completed the task. Most experts agreed that the brain looked realistic (8/10), but far fewer agreed that the brain felt realistic (2/10). Half the expert participants (5/10) agreed that the aneurysm clip application task was realistic. When compared to novices, experts had a significantly higher median mOSATS (27 vs. 14.5; p < 0.01) and STS score (18 vs. 9; p < 0.01); the STS score was strongly correlated with the previously validated mOSATS score (p < 0.01). Overall, there was a trend towards experts exerting a lower median force than novices, however, these differences were not statistically significant (3.8â N vs. 4.0â N; p = 0.77). Suggested improvements for the model included reduced stiffness and the addition of cerebrospinal fluid (CSF) and arachnoid mater. Conclusion: At present, the AneurysmBox has equivocal face and content validity, and future versions may benefit from materials that allow for improved haptic feedback. Nonetheless, it has good construct validity, suggesting it is a promising adjunct to training.
RESUMO
Herein, electroactive polymer based photo-induced hybrid power cell has been developed using CTAB/PVDF composite film in a sustainable manner. First high dielectric polymer film has been prepared by doping CTAB in PVDF matrix via solution casting method. In the basic configuration of this hybrid power cell, aqueous electrolyte solution of PVA-MnO2-Eosin Y has been utilized as solar light absorber and photo-electron generator whereas the high dielectric CTAB/PVDF (~ 400) is used as dielectric separator cum storage part in a very transparent way. The cell shows maximum voltage [Formula: see text] 1.1 V with short-circuit current density ~ 7.83 mA/cm2 under ~ 110 mW/cm2 normal light illumination. The device reveal almost same performance for a long time (30 days). The high storage impact of the hybrid cell is investigated by its promising conversion efficiency [Formula: see text] with energy density and power density [Formula: see text] mWh/m2 and [Formula: see text] 5.5 W/m2 respectively.
RESUMO
The present work reports a novel antibacterial nanocomposite film comprising of copper nanowire impregnated biocompatible hypromellose using polyethylene glycol as a plasticiser. Detailed physico-chemical characterization using X-ray diffraction, Fourier transform infrared spectroscopy, UV-Visible spectroscopy and electron microscopy shows uniform dispersion of copper nanowire in the polymer matrix without any apparent oxidation. The film is flexible and shows excellent antibacterial activity against both Gram positive and negative bacteria at 4.8 wt% nanowire loading with MIC values of 400 µg/mL and 500 µg/mL for E. coli and S. aureus respectively. Investigation into the antibacterial mechanism of the nanocomposite indicates multiple pathways including cellular membrane damage caused by released copper ions and reactive oxygen species generation in the microbial cell. Interestingly, the film showed good biocompatibility towards normal human dermal fibroblast at minimum bactericidal concentration (MBC). Compared to the copper nanoparticles reported earlier in vitro studies, this low cytotoxicity of copper nanowires is due to the slow dissolution rate of the film and production of lower amount of ROS producing Cu2+ ions. Thus, the study indicates a strong potential for copper nanowire-based composites films in broader biomedical and clinical applications.
Assuntos
Nanopartículas Metálicas , Nanocompostos , Nanofios , Antibacterianos/farmacologia , Cobre/farmacologia , Escherichia coli , Humanos , Derivados da Hipromelose , Testes de Sensibilidade Microbiana , Espectroscopia de Infravermelho com Transformada de Fourier , Staphylococcus aureus , Difração de Raios XRESUMO
Background: 98% of stillbirths occur in low- and middle- income countries. Obstructed labor is a common cause for both neonatal and maternal mortality, with a lack of skilled birth attendants one of the main reasons for the reduction in operative vaginal birth, especially in low- and middle- income countries. We introduce a low cost, sensorized, wearable device for digital vaginal examination to facilitate accurate assessment of fetal position and force applied to the fetal head, to aid training in safe operative vaginal birth. Methods: The device consists of flexible pressure/force sensors mounted onto the fingertips of a surgical glove. Phantoms of the neonatal head were developed to replicate sutures. An Obstetrician tested the device on the phantoms by performing a mock vaginal examination at full dilatation. Data was recorded and signals interpreted. Software was developed so that the glove can be used with a simple smartphone app. A patient and public involvement panel was consulted on the glove design and functionality. Results: The sensors achieved a 20 Newton force range and a 0.1 Newton sensitivity, leading to 100% accuracy in detecting fetal sutures, including when different degrees of molding or caput were present. They also detected sutures and force applied with a second sterile surgical glove on top. The software developed allowed a force threshold to be set, alerting the clinician when excessive force is applied. Patient and public involvement panels welcomed the device with great enthusiasm. Feedback indicated that women would accept, and prefer, clinicians to use the device if it could improve safety and reduce the number of vaginal examinations required. Conclusion: Under phantom conditions to simulate the fetal head in labor, the novel sensorized glove can accurately determine fetal sutures and provide real-time force readings, to support safer clinical training and practice in operative birth. The glove is low cost (approximately 1 USD). Software is being developed so fetal position and force readings can be displayed on a mobile phone. Although substantial steps in clinical translation are required, the glove has the potential to support efforts to reduce the number of stillbirths and maternal deaths secondary to obstructed labor in low- and -middle income countries.
RESUMO
The presence of engineered nanoparticles is continuously increasing in our environment and causing potential risks to the ecosystem. Researchers from various fields report many articles on the effects of different nanoparticles on plants, animals and microorganisms. Here we have studied for the first time the effect of nano mullite (NMu) and their metal- amended derivatives on the growth of mung bean plants. Results shows that the metal- amended NMu exerts adverse effects on the growth and biomass production of plants compared to NMu. For toxicity studies, we measured the germination index and relative root elongation, while leakage of electrolytes and root oxidizability were measured to study the effect of NMu on mung bean seeds and seedling tissues. Translocation and accumulation of NMu within different parts of the plant body were proved by elemental analysis of dried plant samples.
Assuntos
Silicatos de Alumínio/toxicidade , Fabaceae/efeitos dos fármacos , Nanopartículas/toxicidade , Poluentes do Solo/toxicidade , Silicatos de Alumínio/química , Silicatos de Alumínio/metabolismo , Fabaceae/crescimento & desenvolvimento , Nanopartículas/química , Poluentes do Solo/química , Poluentes do Solo/metabolismo , Espectrometria por Raios XRESUMO
The need for sustainable technologies to address environmental pollution and energy crisis is paramount. Here we present a novel multifunctional nanocomposite, free standing film by combining piezoelectric molybdenum sulphide (MoS2) nanoflower with poly vinylidene fluoride (PVDF) polymer, which can harness otherwise wasted mechanical energy for useful energy generation and/or water purification. The unique MoS2 nanoflower morphology is exploited to render the whole nanocomposite piezo active. A number of features are demonstrated to establish potential practical usage. Firstly, the nanocomposite is piezoelectric and piezocatalytic simultaneously without requiring any poling step (i.e. self-poled). Secondly, the self-poled piezoelectricity is exploited to make a nanogenerator. The nanogenerator produced >80 V under human finger tapping with a remarkable power density, reaching 47.14 mW cm-3. The nanocomposite film is made by simple solution casting, and the corresponding nanogenerator powers up 25 commercial LEDs by finger tapping. Last but not the least, the developed films show efficient, fast and stable piezocatalytic dye degradation efficiency (>90% within 20 min) against four different toxic and carcinogenic dyes under dark condition. Reusability of at least 10 times is also demonstrated without any loss of catalytic activity. Overall, our nanocomposite has clear potential for use as self-powered sensor and energy harvester, and in water remediation systems. It should potentially also be deployable as a surface mounted film/coating in process engineering, industrial effluent management and healthcare devices systems.
RESUMO
In this study, porous fluorescent nanocrystalline erbium doped hydroxyapatite (eHAp) was synthesized via hydrothermal assisted co-precipitation method. Eucalyptus oil (EU), frankincense oil (FO), Tea tree oil (TTO), wintergreen oil (WO) were successfully absorbed into eHAp pellet by vacuum filtration technique using Buckner funnel. Phase crystallization, fluorescence property and microstructure of eHAp were confirmed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Photoluminiscence spectroscopy (PL) and Field emission scanning electron microscopy (FESEM). Strong antimicrobial activity was observed for EU, TTO and WO on both E. coli and S. aureus mediated by cell membrane damage and leakage of cytoplasmic components. The oil absorbed eHAp nanocomposites were found to be moderately biocompatible with normal WI-38 cells up to MIC concentration various time scale. The nanocomposites showed significant cytotoxic activity on breast cancer cell line MDA-MB 468 and the fluorescent property of the eHAp was utilized to visualize internalization of particles in the cells. The release profile of the oils from the eHAp matrix showed pH dependent release indicated that the porous matrix can be used as a suitable carrier for modulated and sustained release of bioactive components. Thus, given the multifunctional attributes these natural essential oil-based nanocomposites show great promise as an alternative to conventional therapeutic treatments.
Assuntos
Nanocompostos , Óleos Voláteis , Antibacterianos/farmacologia , Durapatita , Escherichia coli , Testes de Sensibilidade Microbiana , Óleos Voláteis/farmacologia , Espectroscopia de Infravermelho com Transformada de Fourier , Staphylococcus aureus , Difração de Raios XRESUMO
Development of fluorescent erbium doped hydroxyapatite (eHAp)-chitosan nanocomposite film is reported. Nanocrystalline eHAp has been synthesized by hydrothermal assisted precipitation method using erbium (III) ions as dopant. Physico-chemical characterization by UV/Visible spectroscopy, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), photoluminiscence spectroscopy (PL) and Field emission scanning electron microscopy(FESEM) confirmed incorporation and uniform distribution of eHAp in the chitosan films. Strong antimicrobial activity was observed using eHAp incorporated chitosan films against E. coli and S. aureus by contact inhibition on agar plates. On the other hand, excellent biocompatibility was observed with human lung fibroblast cells (WI-38) which showed strong attachment and proliferation on the chitosan films with minimal cytotoxicity. Moreover, the doped films showed good biodegradation and mineralization behavior after 2 weeks in simulated body fluid. Thus the doped fluorescent chitosan films with multifunctional attributes can be a strong candidate for diverse applications like in antimicrobial treatments, wound healing, tissue scaffolds and bioimaging.
Assuntos
Antibacterianos/farmacologia , Materiais Biocompatíveis/farmacologia , Quitosana/farmacologia , Durapatita/farmacologia , Corantes Fluorescentes/farmacologia , Nanocompostos/química , Antibacterianos/química , Materiais Biocompatíveis/química , Pesquisa Biomédica , Proliferação de Células/efeitos dos fármacos , Quitosana/química , Durapatita/química , Escherichia coli/efeitos dos fármacos , Fibroblastos/efeitos dos fármacos , Corantes Fluorescentes/química , Humanos , Pulmão/citologia , Testes de Sensibilidade Microbiana , Tamanho da Partícula , Staphylococcus aureus/efeitos dos fármacos , Propriedades de SuperfícieRESUMO
Herein we report a simplistic prototype approach to develop an organic photovoltaic self-charging energy storage cell (OPSESC) rooted with biopolymer folic acid (FA) modified high dielectric and electroactive ß crystal enriched poly(vinylidene fluoride) (PVDF) composite (PFA) thin film. Comprehensive and exhaustive characterizations of the synthesized PFA composite films validate the proper formation of ß-polymorphs in PVDF. Significant improvements of both ß-phase crystallization (F(ß) ≈ 71.4%) and dielectric constant (ε ≈ 218 at 20 Hz for PFA of 7.5 mass %) are the twosome realizations of our current study. Enhancement of ß-phase nucleation in the composites can be thought as a contribution of the strong interaction of the FA particles with the PVDF chains. Maxwell-Wagner-Sillars (MWS) interfacial polarization approves the establishment of thermally stable high dielectric values measured over a wide temperature spectrum. The optimized high dielectric and electroactive films are further employed as an active energy storage material in designing our device named as OPSESC. Self-charging under visible light irradiation without an external biasing electrical field and simultaneous remarkable self-storage of photogenerated electrical energy are the two foremost aptitudes and the spotlight of our present investigation. Our as fabricated device delivers an impressively high energy density of 7.84 mWh/g and an excellent specific capacitance of 61 F/g which is superior relative to the other photon induced two electrode organic self-charging energy storage devices reported so far. Our device also proves the realistic utility with good recycling capability by facilitating commercially available light emitting diode.
RESUMO
The design of an energy-harvesting unit with superior output characteristics, i.e., high power density, is a great technological challenge in the present time. Here, simple, lightweight, flexible, and cost-effective piezoelectric nanogenerators (PENGs) have been fabricated by integrating the aluminum electrodes onto Er3+/Fe3+ stimulated electroactive, visible-light-emitting, and large dielectric PVDF films in which ErCl3·6H2O and Fe(NO3)3·9H2O act as the catalytic agents for electroactive ß polymorph nucleation and the enhancement of dielectric properties. The developed PENGs exhibit excellent energy-harvesting performance with very high power density and very fast charging ability compared with the previously reported PVDF-assisted prototype nanogenerators. The PENGs lead to very large power density (â¼160 and â¼55.34 mW cm-3) under periodic finger imparting for Er3+- and Fe3+-stimulated PVDF-film-based energy-harvester units, respectively. The fabricated self-powered PENG is also able to light up 54 commercially available light-emitting diodes.
RESUMO
Copper nanoparticle based clay composite has been synthesized by in situ reduction of a copper ammonium complex ion and characterized by different analytical instruments. The copper nanoparticles were both intercalated and adsorbed on the surface with diameters of <5nm (for intercalated) and 25-30nm (for adsorbed). The composite showed good stability for over 3 months in air. Excellent antimicrobial activity of the composite was observed on Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa and Enterococcus faecalis with mortality rates >90% after 12h. Cellular membrane damage permeated by direct attachment of the composite and indirect damage caused by released copper ion are the primary sources of antibacterial action. Cytotoxicity measurements showed minimal adverse effect on the two human cell lines beyond the M.B.C. value for the microorganisms studied. In the present form the clay composite shows good promise for use in therapeutic applications.