RESUMO
We investigate the mechanism of changing the polarization state to generate noise-like pulses (NLPs) in the all-normal dispersion (ANDi) all-fiber laser based on nonlinear polarization rotation (NPR). Numerical simulations show that the intracavity positive and negative feedback states change with the polarization state, the peak power of the pulse will be clamped when the negative feedback comes into play, thus facilitating the transition from dissipative soliton (DS) to NLP. Experimentally, the observation of wavelength switching and transition between DS and NLP by simply adjusting the polarization state matches the numerical simulation results. This study contributes to a deeper understanding of the mechanism for generating NLP by changing the intracavity polarization state in ANDi all-fiber lasers based on NPR and offers new possibilities for pulse-switchable light sources.
RESUMO
We experimentally and numerically demonstrate the all-normal dispersion (ANDi) ytterbium (Yb)-doped fiber laser based on nonlinear amplifying loop mirror (NALM) mode-locked, which allows tunable single-wavelength and dual-wavelength outputs. The pulses tuning ranges of the dual-wavelength are from 1032.24â nm to 1053.13â nm and from 1047.94â nm to 1069.05â nm, and the repetition frequency difference varies from 1766Hz to 1834Hz. To our knowledge, this is the widest dual-wavelength tuning range of Yb-doped fiber lasers based on NALM mode-locked. We test for 90 minutes and have high stability in both single-wavelength and dual-wavelength. In addition, the pulsed collision dynamics between two solitons at different wavelengths are numerically studied. Numerical results show that during the pulse collision, the two solitons pass through each other and maintain their properties, which also confirms the particle nature of the isolated wave. Our research contributes to the dynamics of dual-wavelength solitons collision in NALM mode-locked fiber laser and provides what we believe to be is a new idea for tunable Yb-doped dual-comb sources.
RESUMO
The crucial zero-order light due to the pixelation effect of spatial light modulator (SLM) has been a serious issue in the field of light modulation, especially in applications with a high numerical aperture optical system. In this investigation, we report that by properly adjusting the high-level and low-level pixel voltages of an SLM, the zero-order light caused by the pixelation effect of an SLM can be significantly eliminated. The method is further validated under an inverted fluorescence microscope. The experimental results show that the zero-order light can be inhibited up to 91.3%, accompanied by an improvement of the modulation efficiency from 77.5% to 92.6%.
RESUMO
Micromixer is a key element in a lab on a chip for broad applications in the analysis and measurement of chemistry and engineering. Previous investigations reported that electrokinetic (EK) turbulence could be realized in a "Y" type micromixer with a cross-sectional dimension of 100 µm order. Although the ultrafast turbulent mixing can be generated at a bulk flow Reynolds number on the order of unity, the micromixer has not been optimized. In this investigation, we systematically investigated the influence of electric field intensity, AC frequency, electric conductivity ratio, and channel width at the entrance on the mixing effect and transition electric Rayleigh number in the "Y" type electrokinetic turbulent micromixer. It is found that the optimal mixing is realized in a 350 µm wide micromixer, under 100 kHz and 1.14 × 105 V/m AC electric field, with an electric conductivity ratio of 1:3000. Under these conditions, a degree of mixedness of 0.93 can be achieved at 84 µm from the entrance and 100 ms. A further investigation of the critical electric field and the critical electric Rayleigh number indicates that the most unstable condition of EK flow instability is inconsistent with that of the optimal mixing in EK turbulence. To predict the evolution of EK flow under high Raσ and guide the design of EK turbulent micromixers, it is necessary to apply a computational turbulence model instead of linear instability analysis.
RESUMO
Nonlinearity of electroosmotic flows (EOFs) is ubiquitous and plays a crucial role in ion transport, specimen mixing, electrochemistry reaction, and electric energy storage and utilization. When and how the transition from a linear regime to a nonlinear one occurs is essential for understanding, prohibiting, or utilizing nonlinear EOF. However, due to the lack of reliable experimental instruments with high spatial and temporal resolutions, the investigation of the onset of nonlinear EOF still remains in theory. Herein, we experimentally studied the velocity fluctuations of EOFs driven by an alternating current (AC) electric field via ultrasensitive fluorescent blinking tricks. The linear and nonlinear AC EOFs are successfully identified from both the time trace and energy spectra of velocity fluctuations. The transitional electric field (EA,C) is determined by both the convection velocity (U) and AC frequency (ff) as EA,C â¼ ff0.48-0.027U. We hope the current investigation could be essential in the development of both theory and applications of nonlinear EOFs.
Assuntos
Eletricidade , Eletro-Osmose , Eletroquímica , Transporte de ÍonsRESUMO
In this work, for the first time, four self-sweeping regimes in a single-mode bi-directional ytterbium-doped fiber ring laser are observed by adjusting the polarization controller (PC): normal self-sweeping, reverse self-sweeping, mixed state, and wavelength stop state. In addition, regulating the PC can artificially selectively make the laser operate in normal self-sweeping or reverse self-sweeping within a certain pump power range, and their self-sweeping characteristics (e.g., sweeping rate, sweeping range, etc.) and intensity dynamics are investigated in detail, respectively. In conclusion, we can flexibly regulate the sweeping direction and sweeping characteristics of the bi-directional self-sweeping fiber ring laser in a simple approach by adjusting the PC, which is potentially valuable for its practical application.
RESUMO
We report on ultra-high harmonic mode-locking with a repetition rate of up to â¼1 THz by combining a microfiber knot resonator (MKR) and a Lyot filter. The harmonic mode-locked pulses are tunable by changing the diameter of MKR, which agrees well with the theoretical calculation. Our results indicate that the ultrafast pulse generation mechanism is due to the dissipative four-wave mixing mode-locking technique. This work provides a simple and efficient scheme to generate tunable ultrafast pulses with a high repetition rate for various applications, such as THz generation and ultrafast data communication.
RESUMO
We demonstrate a compact tunable and switchable dual-wavelength fiber laser based on the Lyot filtering effect and the spontaneous radiation peaks of gain fiber. By introducing a period of polarization-maintain Er-doped fiber (PM-EDF), stable dual-wavelength pulses can operate in both the anomalous dispersion region and the normal dispersion region. The corresponding repetition frequency difference of the dual wavelengths has excellent stability while the relative center wavelength can be adjusted in the range of 5 nm to 13 nm. There is no existence of significant sidebands in the optical spectrum during the whole tuning process. This dual-wavelength laser based on two spontaneous radiation peaks in the shorter wavelength direction has great application potential. Our work provides a new design solution for dual-comb sources (DCSs).
RESUMO
In this Letter, we propose a non-iterative multifold strip segmentation phase method for a spatial light modulator (SLM) to generate multifocal spots of diverse beams (Airy, spiral, perfect vortex, and Bessel-Gaussian beams) in a high-numerical-aperture system, with up to 6D controllability. The method is further validated by an inverted fluorescence microscope. By adjusting the bright and dark voltage parameters of the SLM, zero-order light caused by the pixelation effect of the SLM has been successfully eliminated. We hope this research provides a more flexible and powerful approach for the rapid modulation of multi-focus light fields in the development of biomedicine and lithography.
RESUMO
Noise, except for residual side modes, in mode selection and amplification from optical frequency combs by optical injection locking has not been studied in detail, to our knowledge. We report a numerical study of noise behaviors, including both residual side modes and the noise between them. It reveals that comb laser injection can introduce excessive noise, compared to optical injection with a single mode master laser through the interference between residual side modes and resonances within Arnol'd tongues created by periodic forcing in the optical phase, which can be a severe problem for the case of sub-GHz comb mode spacing. The dependences of residual side mode rejection and phase noise variance on comb mode spacing, seeding power, and detuning are discussed to help in low-noise system design and operation.
RESUMO
Elemental identification of individual microsized aerosol particles is an important topic in air pollution studies. However, simultaneous and quantitative analysis of multiple constituents in a single aerosol particle with the noncontact in situ manner is still a challenging task. In this work, we explore the laser trapping-LIBS-machine learning to analyze four elements (Zn, Ni, Cu, and Cr) absorbed in a single micro-carbon black particle in air. By employing a hollow laser beam for trapping, the particle can be restricted in a range as small as â¼1.72 µm, which is much smaller than the focal diameter of the flat-topped LIBS exciting laser (â¼20 µm). Therefore, the particle can be entirely and homogeneously radiated, and the LIBS spectrum with a high signal-to-noise ratio (SNR) is correspondingly achieved. Then, two types of calibration models, i.e., the univariate method (calibration curve) and the multivariate calibration method (random forests (RF) regression), are employed for data processing. The results indicate that the RF calibration model shows a better prediction performance. The mean relative error (MRE), relative standard deviation (RSD), and root-mean-squared error (RMSE) are reduced from 0.1854, 363.7, and 434.7 to 0.0866, 179.8, and 216.2 ppm, respectively. Finally, simultaneous and quantitative determination of the four metal contents with high accuracy is realized based on the RF model. The method proposed in this work has the potential for online single aerosol particle analysis and further provides a theoretical basis and technical support for the precise prevention and control of composite air pollution.
Assuntos
Poluentes Atmosféricos/química , Lasers , Aprendizado de Máquina , Metais/química , Material Particulado/química , Análise Espectral/métodos , Tamanho da PartículaRESUMO
In this investigation, we propose a strip segmentation phase (SSP) method for a spatial light modulator (SLM) to generate independent multifocal spots when the beam passes through a high numerical aperture (NA) lens. With the SSP method, multifocal spots can be generated with each spot independently, flexibly and uniformly distributed. The performance of the SSP method is first validated with numerical simulation. Then, by applying the modulation method with SLM and importing the beams into an inverted fluorescence microscopy system with a high-NA lens, the spot distribution and their shapes can be observed by fluorescent image. The fluorescent image exhibits high uniformity and high consistency with the aforementioned numerical simulations. Finally, we dynamically load a series of phase maps on SLM to realize continuous and independent spot movement in a multifocal array. By laser direct writing on photoresist, a complex NWU-shape structure can be realized flexibly with multi-task fabrication capability. The SSP method can significantly improve the efficiency and flexibility of laser direct writing. It is also compatible with most recent techniques, e.g., multiphoton absorption, stimulated emission depletion and photo-induced depolymerization etc., to realize parallel super-resolution imaging and fabrications.
RESUMO
We reported an all-polarization-maintaining single-frequency ytterbium-doped bidirectional fiber laser for the first time, to the best of our knowledge. Single-frequency operation was achieved by a stable dynamic grating in the active fiber of a proper length owing to the bidirectional operation of the laser. The fiber laser possesses a linewidth of 7.43 kHz, a slope efficiency of 47.9%, and a great long-term stability.
RESUMO
We demonstrate for the first time, to our knowledge, an all-fiber erbium-doped mode-locked laser in which mode-locking (ML) is realized by the combination of nonlinear polarization rotation and a saturable dynamic filtering effect, thereby generating nearly transform-limited ultrashort pulses with a pulse duration and spectral width of 45.2 ps and 0.0775 nm, respectively. The laser achieves both ML and harmonic ML by increasing the pump power. Simultaneously, the filtering function is maintained by the saturable dynamic induced grating (SDIG) throughout the power-modulation process. Furthermore, numerical simulations are used to analyze the pulse energy evolution in the cavity, revealing the advantages of hybrid ML in decreasing the pulse duration and time-bandwidth product under narrow filtering status. This work proposes a practical method to achieve ultrafast laser pulses with a narrow bandwidth, solving the problem that the SDIG has a hard time realizing a stable ML sequence.
RESUMO
Urchin-type cobalt phosphide microparticles assembled by nanorod were encapsulated in a graphene framework membrane (CoP@GF), and used as a binder-free electrode for alkali metal ion batteries. Electrochemical measurements indicate that this membrane exhibits enhanced reversible lithium, sodium, and potassium storage capabilities. Moreover, the energy storage properties of CoP@GF electrodes in alkali metal ion batteries display an order of Li>Na>K. DFT calculations on adsorption energy of CoP surfaces for Li, Na, and K indicated that CoP surfaces were more favorable to transfer electrons to Li atoms than Na and K, and the surface reactivity can be ordered as Li-CoP>Na-CoP>K-CoP; thus, CoP@GF exhibits better storage capacity for lithium. This work provides experimental and theoretical basis for understanding the electrochemical performance of cobalt phosphide-based membranes for alkali metal ion batteries.
RESUMO
The interface of mediums with refractive indices discontinuous, for example air-glass and glass-water, are inevitable in microscopic imaging. In this work, the aberration of oblique interface with refractive index discontinuous on the laser scanning microscope was investigated theoretically with numerical simulations. It was found that the position, shape and FWHM of focal spots, were all significantly affected by the aberration due to oblique interface. The aberration can cause serious shifting of focal spots in the axial direction of beam during z -scanning and lead to an inaccurate reconstruction of three-dimensional (3D) targets. The aberration can also lead to a decreasing spatial resolution. To correct the influence of the aberration, a pure-phase modulation method has been proposed. By applying a phase compensation map into a spatial light modulator (SLM), the oblique interface aberration had been corrected experimentally in a laser scanning microscope. We hope this research can attract the attention of researchers when using scanning microscope, especially for reconstructing 3D biological and material structures.
Assuntos
Refratometria , Microscopia ConfocalRESUMO
In this article, we report, to the best of our knowledge, the first observation of the reverse self-sweeping phenomenon in an all-polarization-maintaining bidirectional ytterbium-doped fiber laser. Conventional behaviors, including the dependence of sweeping range, sweeping rate and average pulse repetition rate on the pump power, can be observed in our fiber laser. Two couplers with ratio of 50/50 and 10/90 are respectively employed as the output coupler in fiber laser, which generates the reverse self-sweeping phenomenon for comparison.
RESUMO
We systematically study the stable-, period-N- and multiple-soliton regimes in an Erbium-doped fiber laser effectively mode-locked by nonlinear polarization rotation technique. In the stable mode-locked regime, an invariant soliton with 497 fs pulse duration and 6.9 nm optical spectrum are obtained. With a larger pump power of 180 mW, the period-N state (in which the pulse intensity returns to its original value after N cavity-roundtrips) emerges, accompanied by sub-sideband generation on the first Kelly sideband and spectrum shift. Considering the inconsistent central wavelengths between gain and polarization-dependent isolator (PD-ISO) firstly, to our knowledge, the numerical results are in good agreement with the experiment and reveal the composite filtering of gain and PD-ISO takes major responsibility for spectrum shift, which causes group velocity offset simultaneously. Further study shows the continued increase of pump power can lead to the laser operating in the unstable multi-pulse state and the narrow spectral width contributes to stabilizing the multi-pulse state. Our work can promote the understanding of soliton dynamics and filtering in ultrafast fiber lasers.
RESUMO
We study, to the best of our knowledge, the first observations of light propagation in synthetic photonic lattice with anti-parity-time symmetry by tuning the gain or loss of two coupled fiber rings alternatively and corresponding phase distribution periodically. By tuning the phase φ and the wave number Q in the lattice, asymmetric transmission of the light field can be achieved for both long and short loops when φ≠nπ/2 (n is an integer). Further investigations demonstrate that asymmetric localization of the light field in the long loop and symmetric diffraction-free transmission in two loops can both be realized by changing these two parameters. Our work provides a new method to obtain anti-parity-time symmetry in synthetic photonic lattice and paves a broad way to achieve novel optical manipulation in photonic devices.
RESUMO
The lithium and sodium storage performances of SnS anode often undergo rapid capacity decay and poor rate capability owing to its huge volume fluctuation and structural instability upon the repeated charge/discharge processes. Herein, a novel and versatile method is described for in situ synthesis of ultrathin SnS nanosheets inside and outside hollow mesoporous carbon spheres crosslinked reduced graphene oxide networks. Thus, 3D honeycomb-like network architecture is formed. Systematic electrochemical studies manifest that this nanocomposite as anode material for lithium-ion batteries delivers a high charge capacity of 1027 mAh g-1 at 0.2 A g-1 after 100 cycles. Meanwhile, the as-developed nanocomposite still retains a charge capacity of 524 mAh g-1 at 0.1 A g-1 after 100 cycles for sodium-ion batteries. In addition, the electrochemical kinetics analysis verifies the basic principles of enhanced rate capacity. The appealing electrochemical performance for both lithium-ion batteries and sodium-ion batteries can be mainly related to the porous 3D interconnected architecture, in which the nanoscale SnS nanosheets not only offer decreased ion diffusion pathways and fast Li+ /Na+ transport kinetics, but also the 3D interconnected conductive networks constructed from the hollow mesoporous carbon spheres and reduced graphene oxide enhance the conductivity and ensure the structural integrity.