RESUMO
Regulating the strain of inorganic perovskites has emerged as a critical approach to control their electronic and optical properties. Here, an alternative strategy to further control the piezoelectric properties by substituting the halogen atom (I/Br) in the CsPbX3 perovskite (X = Cl, Br) structure is adopted. A series of piezoelectric materials with excellent piezoelectric coefficients (d33 ) are unveiled. Iodine-incorporated CsPbBr2 I demonstrates the record intrinsic piezoelectric response (d33 ≈47 pC N-1 ) among all inorganic metal halide perovskites. This leads to an excellent electrical output power of ≈ 0.375 mW (24.8 µW cm-2 N-1 ) in the piezoelectric energy generator (PEG) which is higher than those of the pristine/mixed perovskite references with CsPbX3 (X = I, Br, Cl). With its structural phase remaining unchanged, the strained CsPbBr2 I retains its superior piezoelectricity in both thin film and nanocrystal powder forms, further demonstrating its repeatability and versatility of applications. The origin of high piezoelectricity is found to be due to halogen-induced anisotropic lattice strain in the unit-cell along the c-axis, and octahedral distortion. This study reveals an avenue to design new piezoelectric materials by modifying their halide constituents and paves the way to design efficient PEGs for improved electromechanical energy conversion.
RESUMO
Point-of-care testing (POCT) of clinical biomarkers is critical to health monitoring and timely treatment, yet biosensing assays capable of detecting biomarkers without the need for costly external equipment and reagents are limited. Blood-based assays are, specifically, challenging as blood collection is invasive and follow-upprocessing is required. Here, we report a versatile assay that employs hydrogel microneedles (HMNs) to extract interstitial fluid (ISF), in a minimally invasive manner integrated with graphene oxide-nucleic acid (GO.NA)-based fluorescence biosensor to sense the biomarkers of interest in situ. The HMN-GO.NA assay is supplemented with a portable detector, enabling a complete POCT procedure. Our system could successfully measure four clinically important biomarkers (glucose, uric acid (UA), insulin, and serotonin) ex vivo, in addition, to accurately detecting glucose and UA in vivo.
Assuntos
Técnicas Biossensoriais , Ácidos Nucleicos , Hidrogéis , Glucose , Biomarcadores , Sondas de Ácido NucleicoRESUMO
Reversible lasing performance degradation is investigated on an uncoated actively- biased GaAs/Al0.45Ga0.55As mid-infrared quantum cascade laser (MIR-QCL) facet. The surface temperature rises (ΔT) on the MIR QCL are characterized before and after the device undergoes an accelerated aging burn-in test, followed by hydrogen plasma treatment. The data is visualized by spatially resolved time-domain thermoreflectance (SR-TDTR) microscopy. On the laser facet, ΔT decreases with a drop in lasing performance and ΔT increases with an increase in lasing performance. Along the laser cavity, the thermal property change is negligible before and after the aging test, independent of the optical performance change. The results verify that thermal-induced facet oxidation is the main reason for the rapid degradation of the lasing performance in the early aging stage.
RESUMO
We correct three typographical errors in our published paper [Opt. Express26, 9194 (2018)10.1364/OE.26.009194]. First, we correct the error in the Table 1. The injection coupling strength for the summarized device in the first raw is corrected to 1.5 meV. Second, we correct the listed reference 10 to "S. Kumar, C. W. I. Chan, Q. Hu, and J. L. Reno, "A 1.8-THz quantum cascade laser operating significantly above the temperature of âω/kB," Nat. Phys. 7(2), 166-171 (2011)." Third, we correct the typographical error in the quantum structure layer thickness description. The text description on quantum structure layer thickness is correct to 40.3/74.4/24.1/103.6/29.7/79.7/40.3/156.7, which is the correct number extracted from high-resolution X-ray diffraction (HRXRD) measurement and used in simulation through the manuscript. The corrections do not alter the figures and conclusions in manuscript.
RESUMO
Metal halide perovskites show promise for light-emitting diodes (LEDs) owing to their facile manufacture and excellent optoelectronic performance, including high color purity and spectral stability, especially in the green region. However, for blue perovskite LEDs, the emission spectrum line width is broadened to over 25 nm by the coexistence of multiple reduced-dimensional perovskite domains, and the spectral stability is poor, with an undesirable shift (over 7 nm) toward longer wavelengths under operating conditions, degradation that occurs due to phase separation when mixed halides are employed. Here we demonstrate chloride insertion-immobilization, a strategy that enables blue perovskite LEDs, the first to exhibit narrowband (line width of 18 nm) and spectrally stable (no wavelength shift) performance. We prepare bromide-based perovskites and then employ organic chlorides for dynamic treatment, inserting and in situ immobilizing chlorides to blue-shift and stabilize the emission. We achieve sky-blue LEDs with a record luminance over 5100 cd/m2 at 489 nm, and an operating half-life of 51 min at 1500 cd/m2. By device structure optimization, we further realize an improved EQE of 5.2% at 479 nm and an operating half-life of 90 min at 100 cd/m2.
RESUMO
This work presents a six-level scheme terahertz (THz) quantum cascade laser (QCL) design in which the resonant-phonon (RP) and the scattering-assisted (SA) injection/extraction are combined within a single Al0.15Ga0.85As/GaAs based structure. By utilizing extra excited states for hybrid extraction/injection channels, this design minimizes the appearance of an intermediate negative differential resistance (NDR) before the lasing threshold. The final negative differential resistance is observed up to 260K and a high characteristic temperature of 259â K is measured. These observations imply very effective suppression of pre-threshold electrical instability and thermally activated leakage current. In addition, the impact of critical design parameters of this scheme is investigated.
RESUMO
A Quantum Cascade Laser (QCL) was invented in the late 90s as a promising mid-infrared light source and it has contributed to the fields of industry, military, medicine, and biology. The room temperature operation, watt-level output power, compact size, and wide tuning capability of this laser advanced the field of noninvasive blood glucose detection with the use of transmission, absorption, and photoacoustic spectroscopy. This review provides a complete overview of the recent progress and technical details of these spectroscopy techniques, using QCL as an infrared light source for detecting blood glucose concentrations in diabetic patients.
Assuntos
Glicemia/análise , Técnicas Fotoacústicas/métodos , Diabetes Mellitus/sangue , Diabetes Mellitus/patologia , Humanos , Raios Infravermelhos , Lasers , Sistemas Automatizados de Assistência Junto ao Leito , Espectrofotometria Infravermelho/métodosRESUMO
Large-size luminescent solar concentrators (LSCs), which act as a complement to silicon-based photovoltaic (Si-PV) systems, still suffer from low power conversion efficiency (PCE). How to improve the performance of LSCs, especially large ones, is currently a hot research topic. Traditional LSCs have only a single transmission mode of fluorescence from the luminescent materials to the Si-PV, but here we introduce a new idea to improve the absorption of Si-PV by employing dual transmission modes of both fluorescence and scattering light. To prepare LSCs with dual mode transmission, Si-PV systems are coupled around the edges of a light-harvesting slice, which is prepared by ultraviolet light-induced polymerization of methyl methacrylate (MMA) solution containing both luminescent CsPbBr3 and TiO2 nanocrystals (NCs). When the sun light or incident light is coupled into the light-harvesting slice, CsPbBr3 NCs can convert the incident light into fluorescence, and then partly transmit to Si-PV at the edges, where the light is finally converted into electrical energy. Besides the traditional fluorescence transmission mode, the addition of TiO2 brings another transmission mode, namely the scattering of incident light to Si-PV, leading to an increase in PCE. In comparison to that of pure CsPbBr3-based LSCs without the addition of TiO2 (0.97%), the PCE of TiO2-doped LSCs with a large size of 20 cm × 20 cm is improved to 1.82%. The maximal PCE appears for LSCs with a size of 5 cm × 5 cm, reaching 2.62%. The reported method of dual transmission modes is a new alternative way to improve the performance of LSC devices, which does not need to change the optical properties of luminescent materials. Moreover, the production process is simple, low-cost and suitable for preparing large area LSCs, further promoting the application of LSCs.
RESUMO
The emission wavelength of organic-inorganic hybrid perovskite quantum dots (QDs) can be tuned by controlling reaction time relevant to the halide exchange. It is because halide exchange with different time would lead to different molar ratio of halides in perovskite QDs such as Cl and Br. Here, to research the ligand's effect on the halide exchange, this work synthesized 3-mercaptopropionic acid (MPA)-capped CH3 NH3 PbBrx Cl3-x QDs. It was found that SH- of MPA appeared to inhibit the halide exchange during the reation. Moreover, although the MPA-capped CH3 NH3 PbBrx Cl3-x QDs did not contain the chiral centre, they exhibit the optical rotation. This may provide a method for chirality manipulation of perovskite.
Assuntos
Ácido 3-Mercaptopropiônico/química , Compostos de Cálcio/química , Óxidos/química , Pontos Quânticos/química , Titânio/química , Estrutura Molecular , Fenômenos Ópticos , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
A dual lasing channel Terahertz Quantum Cascade laser (THz QCL) based on GaAs/Al0.17Ga0.83As material system is demonstrated. The device shows the lowest reported threshold current density (550A/cm2 at 50K) of GaAs/AlxGa1-xAs material system based scattering-assisted (SA) structures and operates up to a maximum lasing temperature of 144K. Dual lasing channel operation is investigated theoretically and experimentally. The combination of low frequency emission, dual lasing channel operation, low lasing threshold current density and high temperature performance make such devices ideal candidates for low frequency applications, and initiates the design strategy for achieving high-temperature performance terahertz quantum cascade laser with wide frequency coverage at low frequency.
RESUMO
The strategies and approaches of designing chirped Distributed Bragg Reflector for group velocity compensation in metal-metal waveguide terahertz quantum cascade laser are investigated through 1D and 3D models. The results show the depth of the corrugation periods plays an important role on achieving broad-band group velocity compensation in terahertz range. However, the deep corrugation also brings distortion to the group delay behavior. A two-section chirped DBR is proposed to provide smoother group delay compensation while still maintain the broad frequency range (octave) operation within 2 THz to 4 THz.
RESUMO
[This corrects the article DOI: 10.1039/D3NA00638G.].
RESUMO
InGaN/GaN micro-light-emitting diodes (micro-LEDs) with a metal-insulator-semiconductor (MIS) structure on the sidewall are proposed to improve efficiency. In this MIS structure, a sidewall electrode is deposited on the insulating layer-coated sidewall of the device mesa between a cathode on the bottom and an anode on the top. Electroluminescence (EL) measurements of fabricated devices with a mesa diameter of 10 µm show that the application of negative biases on the sidewall electrode can increase the device external quantum efficiency (EQE). In contrast, the application of positive biases can decrease the EQE. The band structure analysis reveals that the EQE is impacted because the application of sidewall electric fields manipulates the local surface electron density along the mesa sidewall and thus controls surface Shockley-Read-Hall (SRH) recombination. Two suggested strategies, reducing insulator layer thickness and exploring alternative materials, can be implemented to further improve the EQE of MIS micro-LEDs in future fabrication.
RESUMO
This study explored the potential of Fe3O4, SnFe2O4, and CoFe2O4 nanoparticles as larvicidal and adulticidal agents against Aedes aegypti (A. aegypti) larvae and adults, which are vectors for various diseases. This research involved the synthesis of these nanoparticles using the coprecipitate method. The results indicate that CoFe2O4 nanoparticles are the most effective in both larvicidal and adulticidal activities, with complete mortality achieved after 96 h of exposure. SnFe2O4 nanoparticles also showed some larvicidal and adulticidal efficacy, although to a lesser extent than the CoFe2O4 nanoparticles. Fe3O4 nanoparticles exhibited minimal larvicidal and adulticidal effects at low concentrations but showed increased efficacy at higher concentrations. The study also revealed the superparamagnetic nature of these nanoparticles, making them potentially suitable for applications in aquatic environments, where A. aegypti larvae often thrive. Additionally, the nanoparticles induced observable damage to the gut structure of the mosquitoes and larvae, which could contribute to their mortality. Overall, this research suggests that CoFe2O4 nanoparticles, in particular, hold promise as environment-friendly and effective agents for controlling A. aegypti mosquitoes, which are responsible for the transmission of diseases such as dengue fever, Zika virus, and Chikungunya. Further studies and field trials are needed to validate their practical use in mosquito control programs.
RESUMO
The impacts of side exposed side strips (for high order modes suppression) and ridge width on terahertz (THz) quantum cascade laser (QCL) performance are investigated through numerical modeling and verified experimentally. Our results show that shrinking ridge width of THz QCLs with metal-metal waveguides leads to a substantial degradation of device performance due to higher optical loss resulting from the side-exposed strips in the highly-doped top contact layer. Nevertheless, the side-exposed strips facilitate single mode operation by strongly suppressing higher-order modes. An optimal width of the side exposed strips is obtained for achieving adequate higher-order mode suppression and maintaining sufficiently low fundamental mode loss.
RESUMO
The combination of mid-infrared and photoacoustic spectroscopy has shown promising developments as a substitute for invasive glucose detection technology. A dual single-wavelength quantum cascade laser system has been developed using photoacoustic spectroscopy for noninvasive glucose monitoring. Biomedical skin phantoms with similar properties to human skin have been prepared with blood components at different glucose concentrations as test models for the setup. The detection sensitivity of the system has been improved to ± 12.5 mg/dL in the hyperglycemia blood glucose ranges. An ensemble machine learning classifier has been developed to predict the glucose level in the presence of blood components. The model, which was trained with 72,360 unprocessed datasets, achieved a 96.7% prediction accuracy with 100% of the predicted data located in zones A and B of Clarke's error grid analysis. These findings fulfill both the US Food and Drug Administration and Health Canada requirements for glucose monitors.
Assuntos
Glicemia , Glucose , Humanos , Glucose/análise , Glicemia/análise , Lasers Semicondutores , Automonitorização da Glicemia , Análise EspectralRESUMO
Indium arsenide (InAs) quantum dots (QDs) grown by molecular beam epitaxy (EBM) on gallium arsenide (GaAs) substrates have exhibited quantized charge-trapping characteristics. An electric charge can be injected in a single QD by a gold-coated AFM nano-probe placed directly on it using a conductive-mode atomic force microscope (C-AFM). The results revealed separate current-voltage (I-V) curves during consecutive measurements, where the turn-on voltages measured at the subsequent voltage sweeps are incrementally lower than that at the initial sweep. We demonstrate that the charge state of the QD can change over a long enough time by measuring the I-V data on the same QD at different time intervals. Discrete energy states (here, five states) have been observed due to the quantized charge leakage from the QD into the surrounding materials. These quantum states with five energy levels have been verified using quantum theory analysis of the quantum-well with the help of a numerical simulation model, which depends on the QD dimensions. The size of the quantum-well in the model is in good agreement with the actual QD size, whose lateral dimension is confirmed using a scanning electron microscope. At the same time, the height is estimated from the atomic force microscope topography.
RESUMO
The prevalence of diabetes is rapidly increasing worldwide and can lead to a range of severe health complications that have the potential to be life-threatening. Patients need to monitor and control blood glucose levels as it has no cure. The development of non-invasive techniques for the measurement of blood glucose based on photoacoustic spectroscopy (PAS) has advanced tremendously in the last couple of years. Among them, PAS in the mid-infrared (MIR) region shows great promise as it shows the distinct fingerprint region for glucose. However, two problems are generally encountered when it is applied to monitor real samples for in vivo measurements in this MIR spectral range: (i) low penetration depth of MIR light into the human skin, and (ii) the effect of other interfering components in blood, which affects the selectivity of the detection system. This review paper systematically describes the basics of PAS in the MIR region, along with recent developments, technical challenges, and data analysis strategies, and proposes improvements for the detection sensitivity of glucose concentration in human bodies. It also highlights the recent trends of incorporating machine learning (ML) to enhance the detection sensitivity of the overall system. With further optimization of the experimental setup and incorporation of ML, this PAS in the MIR spectral region could be a viable solution for the non-invasive measurement of blood glucose in the near future.
Assuntos
Diabetes Mellitus , Glucose , Humanos , Glucose/análise , Glicemia/análise , Espectrofotometria Infravermelho/métodos , Pele/química , Diabetes Mellitus/diagnóstico , Diabetes Mellitus/metabolismoRESUMO
Piezoelectric materials convert between mechanical and electrical energy and are a basis for self-powered electronics. Current piezoelectrics exhibit either large charge (d33) or voltage (g33) coefficients but not both simultaneously, and yet the maximum energy density for energy harvesting is determined by the transduction coefficient: d33*g33. In prior piezoelectrics, an increase in polarization usually accompanies a dramatic rise in the dielectric constant, resulting in trade off between d33 and g33. This recognition led us to a design concept: increase polarization through Jahn-Teller lattice distortion and reduce the dielectric constant using a highly confined 0D molecular architecture. With this in mind, we sought to insert a quasi-spherical cation into a Jahn-Teller distorted lattice, increasing the mechanical response for a large piezoelectric coefficient. We implemented this concept by developing EDABCO-CuCl4 (EDABCO = N-ethyl-1,4-diazoniabicyclo[2.2.2]octonium), a molecular piezoelectric with a d33 of 165 pm/V and g33 of ~2110 × 10-3 V m N-1, one that achieved thusly a combined transduction coefficient of 348 × 10-12 m3 J-1. This enables piezoelectric energy harvesting in EDABCO-CuCl4@PVDF (polyvinylidene fluoride) composite film with a peak power density of 43 µW/cm2 (at 50 kPa), the highest value reported for mechanical energy harvesters based on heavy-metal-free molecular piezoelectric.
RESUMO
Enhancing the output power of triboelectric nanogenerators (TENGs) requires the creation of micro or nano-features on polymeric triboelectric surfaces to increase the TENGs' effective contact area and, therefore, output power. We deploy a novel bench-top fabrication method called dynamic Scanning Probe Lithography (d-SPL) to fabricate massive arrays of uniform 1 cm long and 2.5 µm wide nano-features comprising a 600 nm deep groove (NG) and a 600 nm high triangular prism (NTP). The method creates both features simultaneously in the polymeric surface, thereby doubling the structured surface area. Six thousand pairs of NGs and NTPs were patterned on a 6×5 cm2 PMMA substrate. It was then used as a mold to structure the surface of a 200 µm thick Polydimethylsiloxane (PDMS) layer. We show that the output power of the nano-structured TENG is significantly more than that of a TENG using flat PDMS films, at 12.2 mW compared to 2.2 mW, under the same operating conditions (a base acceleration amplitude of 0.8 g).