RESUMO
Fiber-integrated micro/nanostructures play a crucial role in modern industry, mainly owing to their compact size, high sensitivity, and resistance to electromagnetic interference. However, the three-dimensional manufacturing of fiber-tip functional structures beyond organic polymers remains challenging. It is essential to construct fiber-integrated inorganic silica with designed functional nanostructures for microsystem applications. Here, we develop a strategy for the 3D nanolithography of fiber-integrated silica from hybrid organic-inorganic materials by ultrafast laser-induced multiphoton absorption. Without silica nanoparticles and polymer additives, the acrylate-functionalized precursors can be locally cross-linked through a nonlinear effect. Followed by annealing at low temperature, the as-printed micro/nanostructures are transformed to high-quality silica with sub-100 nm resolution. Silica microcantilever probes and microtoroid resonators are directly integrated onto the optical fiber, showing strong thermal stability and quality factors. This work provides a promising strategy for fabricating desired fiber-tip silica micro/nanostructures, which is helpful for the development of integrated functional device applications.
RESUMO
We demonstrated a two-dimensional vector displacement (bending) sensor with high angular resolution based on Vernier effect generated by two cascaded Fabry-Perot interferometers (FPI) in a seven-core fiber (SCF). To form the FPI, plane-shaped refractive index modulations are fabricated as the reflection mirrors in the SCF using slit-beam shaping and femtosecond laser direct writing. Three pairs of cascaded FPIs are fabricated in the center core and the two non-diagonal edge cores of the SCF and applied to the vector displacement measurement. The proposed sensor exhibits high displacement sensitivity with significant direction dependence. The magnitude and direction of the fiber displacement can be obtained via monitoring the wavelength shifts. Moreover, the source fluctuations and the temperature cross-sensitivity can be referenced out by monitoring the bending-insensitive FPI of the center core.
RESUMO
Regulatory B cells (Bregs) are immune cells that constrain autoimmune response and restrict inflammation via their expression of interleukin (IL)-10. However, the molecular mechanisms underlying Breg differentiation and IL-10 secretion remain unclear. Previous data suggest that cellular metabolism determines both the fate and function of these cells. Here, we suggest an essential role for mitochondrial oxidative phosphorylation (OXPHOS) in the regulation of IL-10 in these Bregs. We found that IL-10+ B cells from IL-10-green fluorescent protein-expressing mice had higher oxygen consumption rate than IL-10- B cells. In addition, inhibition of OXPHOS decreased the expression of IL-10 in B cells. Furthermore, suppression of OXPHOS diminished the expression of surface markers for Bregs and impaired their therapeutic effects in dextran sulphate sodium (DSS)-induced colitis. Mechanistically, mitochondrial OXPHOS was found to regulate the transcription factor HIF-1α through the extracellular signal-related kinase pathway. Taken together, this study reveals a strong correlation between mitochondrial OXPHOS and Breg phenotype/function, indicating OXPHOS as a therapeutic target in autoimmune diseases driven by Breg dysfunction.
Assuntos
Linfócitos B Reguladores , Colite , Camundongos , Animais , Interleucina-10/genética , Interleucina-10/metabolismo , Fosforilação Oxidativa , Camundongos Endogâmicos C57BLRESUMO
Age-associated B cells (ABCs) are characterized by CD11c and T-bet expression. ABCs are elevated in several autoimmune diseases and may be associated with RA. This study aimed to investigate ABCs' role in RA and identify potential factors affecting ABCs in RA patients. Peripheral blood mononuclear cells (PBMCs) and plasma samples were collected from 75 RA patients and 27 sex- and age-matched healthy controls. Proportions of ABCs (CD19+CD11c+T-bet+), plasmablasts (CD19+CD27+CD38hi), Bregs (CD19+IL-10+), and T follicular helper (Tfh) cells (CD4+CXCR5+PD-1hi) in PBMCs were detected using flow cytometry. Plasma IL-21, IFN-γ, and IL-10 levels were detected by ELISA. Plasma miRNAs (miR-34a, -122, -133a, -142, -146a, -208a, and -155) were detected by RT-PCR. Naïve B cells transfected with different miRNA mimics were deteced after 3 days culture under stimulation of anti-IgM and anti-CD40 or IL-21, IFN-γ, anti-IgM and anti-CD40. ABC proportions in PBMCs were increased in RA patients with higher disease activity and decreased in those with good treatment responses. Additionally, ABC proportions in PBMCs in RA patients were positively correlated with DAS28 scores. Plasma levels of IL-21, miR-142, and miR-146a and proportions of Tfh cells were positively correlated with ABC percentages in PBMCs. Herein, ABCs were identified as potential biological indicators for disease activity and treatment responses. Moreover, miR-142 and miR-146a could induce the differentiation of ABCs in naïve B cells in conjunction with IL-21 and IFN-γ.
Assuntos
Artrite Reumatoide , Linfócitos B Reguladores , MicroRNAs , Linfócitos B Reguladores/metabolismo , Humanos , Interleucina-10/metabolismo , MicroRNAs/genética , MicroRNAs/metabolismo , Linfócitos T Auxiliares-IndutoresRESUMO
We demonstrate the fabrication of a new highly birefringent cladding fiber Bragg grating (Hi-Bi CFBG) consisting of a pair of sawtooth stressors near the fiber core by using a femtosecond laser direct writing technology. The unique sawtooth structure serves as in-fiber stressor and also generates Bragg resonance due to its periodicity. After optimization of laser pulse energy, the Hi-Bi CFBG with a high birefringence of 2.2 × 10-4 and a low peak reflectivity of â¼ -24.5 dB (corresponding to â¼ 0.3%) was successfully fabricated in a conventional single-mode fiber (SMF). And then, a wavelength-division-multiplexed Hi-Bi CFBGs array and an identical Hi-Bi CFBGs array were successfully constructed. Moreover, a simultaneous measurement of torsion and strain at high temperature of 700 °C was realized by using the fabricated Hi-Bi CFBG, in which the torsion can be deduced by monitoring the reflection difference between the two polarization peaks and strain can be detected by measuring polarization peak wavelength. A high torsion sensitivity of up to 80.02 dB/(deg/mm) and a strain sensitivity of 1.06 pm/µÉ were achieved. As such, the proposed Hi-Bi CFBG can be used as a mechanical sensor in many areas, especially in structural health monitoring at extreme conditions.
RESUMO
In this Letter, we propose and experimentally demonstrate fiber Bragg grating (FBG) fabrication in a flexible and stretchable coreless polymer optical fiber. The flexible polymer optical fiber is prepared with polydimethylsiloxane (PDMS). Femtosecond laser direct writing and slit beam shaping are used to form periodic grating structures in the fiber. The fabricated FBG exhibits a large strain measurement range and a blueshift response to temperature. Moreover, it offers low humidity sensitivity due to its low permeability toward water vapor. Taking advantage of the unique sensing performances of the PDMS fiber, the proposed FBG has considerable advantages over the traditional silica FBG devices for strain and temperature sensing.
RESUMO
A φ-optical frequency domain reflectometry (OFDR) strain sensor with a submillimeter-spatial-resolution of 233â µm is demonstrated by using femtosecond laser induced permanent scatters (PSs) in a standard single-mode fiber (SMF). The PSs-inscribed SMF, i.e., strain sensor, with an interval of 233â µm exhibited a Rayleigh backscattering intensity (RBS) enhancement of 26â dB and insertion loss of 0.6â dB. A novel, to the best of our knowledge, method, i.e., PSs-assisted φ-OFDR, was proposed to demodulate the strain distribution based on the extracted phase difference of P- and S-polarized RBS signal. The maximum measurable strain was up to 1400 µÎµ at a spatial resolution of 233â µm.
RESUMO
We propose an ultrahigh-order fiber Bragg grating (UHO-FBG) containing dense resonants and its application as a novel filtering device in multi-wavelength lasers. The UHO-FBG is fabricated by femtosecond laser plane-by-plane direct inscription. Thanks to the plane-by-plane inscription, high-order Bragg resonances can be formed with multiple reflectance peaks of comparable reflectance in the range of the fiber operating bandwidth and without the transmission depression of long-period gratings in the transmission spectrum. We also experimentally demonstrate the use of UHO-FBG pairs in a distributed Bragg reflector laser, enabling the excitation of multi-wavelength lasers.
RESUMO
We demonstrate for the first time, to the best of our knowledge, the fabrication of a high-quality fiber Bragg grating (FBG) in ZBLAN fiber by using an efficient femtosecond laser point-by-point technology. Two types of FBG, e.g., high coupling coefficient and narrow bandwidth grating, are successfully obtained. The coupling coefficient is strongly dependent on the grating order and pulse energy. A second-order FBG with an ultrahigh coupling coefficient of 325â m-1 and reflectivity of 97.8% is inscribed in the ZBLAN fiber. A pair of FBGs with a narrow FWHM of 0.30 and 0.09â nm are also demonstrated.
RESUMO
A two-dimensional vector bending sensor that is both compact and simple is proposed and demonstrated, based on an edge-core cladding-type fiber Bragg grating (ECLFBG) inscribed in an edge-core. The ECLFBG is written parallel to the edge-core using a femtosecond laser point-by-point technique. The reflection spectrum of this ECLFBG varies significantly depending on the magnitude and direction of the fiber's bend. Combining the trend and sensitivity of the wavelength shift and reflection intensity variations of the ECLFBG, the bending magnitude and direction can be measured simultaneously.
RESUMO
The paper presents selective fiber Bragg grating (FBG) inscription in four-core fiber based on a phase mask scanning method. The inscription factors are systematically investigated, which involves fiber core position and focused laser beam size in fiber, etc. Several specific inscriptions (including individual, dual and all inscriptions) are demonstrated. Two orthogonally positioned cores are selectively inscribed and applied to two-dimension vector bending measurement. The measured bending sensitivities of two FBGs range from -54.3 pm/m-1 to 52.2 pm/m-1 and -53.7 pm/m-1 to 52.8 pm/m-1, respectively. More importantly, it has been revealed that their sensitivities versus bending direction follow regular cosinoidal and sinusoidal distribution. The direction and amplitude of the vector bending can be recovered using measured central wavelength shifts of those two FBGs.
RESUMO
In this paper, we demonstrate a fiber Bragg grating (FBG) with a wide range and a comb with continuous cladding mode resonances inscribed in non-photosensitive single mode fibers using a femtosecond laser and a phase mask. The FBG is inscribed in the core and cladding, exciting a series of cladding modes in transmission. The birefringence induced by this FBG structure offers significant polarization-dependence for cladding modes, thus allowing the vector fiber twist to be perceived. By measuring the peak-to-peak differential intensity of orthogonally polarized cladding mode resonances, the proposed sensor presents totally opposite intensity response in the anticlockwise direction for the torsion angle ranging from -45° to 45°. The cladding mode comb approximately covers wavelengths over the O-, E-, S-, and C-bands in transmission. The cutoff cladding mode of air can be observed in the spectrum. Thus, the sensible refractive index range is estimated to be from 1.00 to 1.44. Temperature responsivity of the grating is also characterized. The proposed device potentially provides new solutions to the various challenges of physical vector and bio-chemical parameters sensing.
RESUMO
A high-energy nanosecond-pulsed ultraviolet (UV) laser Talbot interferometer for high-efficiency, mass production of fiber Bragg grating (FBG) array was experimentally demonstrated. High-quality FBG arrays were successfully inscribed in both H2-free and H2-loaded standard single-mode fibers (SMFs) with high inscription efficiency and excellent reproducibility. Compared with the femtosecond pulse that had a coherent length of several tens of micrometers, a longer coherent length (~10 mm) of the employed laser rendered a wider FBG wavelength versatility over 700 nm band (1200-1900 nm) without the need for optical path difference (OPD) compensation. Dense FBG array with center wavelength separation of ~0.4 nm was achieved and more than 1750 FBGs with separated center wavelength could be inscribed in a single H2-free or H2-loaded SMF in theory, which is promising for mass production of FBG arrays in industry. Moreover, precise focusing of laser beam was superfluous for the proposed system due to the high energy density of pulse. The proposed FBG inscription system was promising for industrialization production of dense FBG arrays.
RESUMO
We demonstrate a fiber-optic 3D vector displacement sensor based on the monitoring of Bragg reflection from an eccentric grating inscribed in a depressed-cladding fiber using the femtosecond laser side-illumination and phase-mask technique. The compact sensing probe consists of a short section of depressed cladding fiber (DCF) containing eccentrically positioned fiber Bragg gratings. The eccentric grating breaks the cylindrical symmetry of the fiber cross-section and further has bending orientation-dependence. The generated fundamental resonance is strongly sensitive to bending of the fiber, and the direction of the bending plane can be determined from its responses. When integrated with axis strain monitoring, the sensor achieves a 3D vector displacement measurement via simple geometric analysis.
RESUMO
With the oil and gas industry growing rapidly, increasing the yield and profit require advances in technology for cost-effective production in key areas of reservoir exploration and in oil-well production-management. In this paper we review our group's research into fiber Bragg gratings (FBGs) and their applications in the oil industry, especially in the well-logging field. FBG sensors used for seismic exploration in the oil and gas industry need to be capable of measuring multiple physical parameters such as temperature, pressure, and acoustic waves in a hostile environment. This application requires that the FBG sensors display high sensitivity over the broad vibration frequency range of 5 Hz to 2.5 kHz, which contains the important geological information. We report the incorporation of mechanical transducers in the FBG sensors to enable enhance the sensors' amplitude and frequency response. Whenever the FBG sensors are working within a well, they must withstand high temperatures and high pressures, up to 175 °C and 40 Mpa or more. We use femtosecond laser side-illumination to ensure that the FBGs themselves have the high temperature resistance up to 1100 °C. Using FBG sensors combined with suitable metal transducers, we have experimentally realized high- temperature and pressure measurements up to 400 °C and 100 Mpa. We introduce a novel technology of ultrasonic imaging of seismic physical models using FBG sensors, which is superior to conventional seismic exploration methods. Compared with piezoelectric transducers, FBG ultrasonic sensors demonstrate superior sensitivity, more compact structure, improved spatial resolution, high stability and immunity to electromagnetic interference (EMI). In the last section, we present a case study of a well-logging field to demonstrate the utility of FBG sensors in the oil and gas industry.
RESUMO
An orientation-dependent displacement sensor based on grating inscription over a fiber core and inner cladding has been demonstrated. The device comprises a short piece of multi-cladding fiber sandwiched between two standard single-mode fibers (SMFs). The grating structure is fabricated by a femtosecond laser side-illumination technique. Two well-defined resonances are achieved by the downstream both core and cladding fiber Bragg gratings (FBGs). The cladding resonance presents fiber bending dependence, together with a strong orientation dependence because of asymmetrical distribution of the "cladding" FBG along the fiber cross-section.
RESUMO
An orientation-sensitive fiber-optic accelerometer based on grating inscription over fiber cladding has been demonstrated. The sensor probe comprises a compact structure in which a short section of thin-core fiber (TCF) stub containing a "cladding" fiber Bragg grating (FBG) is spliced to another single-mode fiber (SMF) without any lateral offset. A femtosecond laser side-illumination technique was utilized to ensure that the grating inscription remains close to the core-cladding interface of the TCF. The core mode and the cladding mode of the TCF are coupled at the core-mismatch junction, and two well-defined resonances in reflection appear from the downstream FBG, in which the cladding resonance exhibits a strong polarization and bending dependence due to the asymmetrical distribution of the cladding FBG along the fiber cross section. Strong orientation dependence of the vibration (acceleration) measurement has been achieved by power detection of the cladding resonance. Meanwhile, the unwanted power fluctuations and temperature perturbations can be referenced out by monitoring the fundamental core resonance.
RESUMO
Over decades, fiber-optic temperature sensors based on conventional single-mode fibers (SMF) have been demonstrated with either high linearity and stability in a limited temperature region or poor linearity and thermal hysteresis in a high-temperature measurement range. For high-temperature measurements, isothermal annealing is typically necessary for the fiber-optic sensors, aiming at releasing the residual stress, eliminating the thermal hysteresis and, thus, improving the high-temperature measurement linearity and stability. In this article, an annealing-free fiber-optic high-temperature (1100 °C) sensor based on a diaphragm-free hollow-core fiber (HCF) Fabry-Perot interferometer (FPI) is proposed and experimentally demonstrated. The proposed sensor exhibits an excellent thermal stability and linearity (R2 > 0.99 in a 100-1100 °C range) without the need for high-temperature annealing. The proposed sensor is extremely simple in preparation, and the annealing-free property can reduce the cost of sensor production significantly, which is promising in mass production and industry applications.
RESUMO
A highly sensitive fiber-optic accelerometer based on detecting the power output of resonances from the core dip is demonstrated. The sensing probe comprises a compact structure, hereby a short section of specific core (with a significant core dip) fiber stub containing a straight fiber Bragg grating is spliced to another single-mode fiber via a core self-alignment process. The femtosecond laser side-illumination technique was utilized to ensure that the grating inscription region is precisely positioned and compact in size. Two well-defined core resonances were achieved in reflection: one originates from the core dip and the other originates from fiber core. The key point is that only one of these two reflective resonances exhibits a high sensitivity to fiber bend (and vibration), whereas the other is immune to it. For low frequency (<10 Hz) and weak vibration excitation (<0.3 m/s2) measurement, the proposed sensor shows a much higher resolution (1.7 × 10-3 m/s2) by simply monitoring the total power output of the high-order core mode reflection. Moreover, the sensor simultaneously provides an inherent power reference to eliminate unwanted power fluctuations from the light source and transmission lines, thus providing a means of evaluating weak seismic wave at low frequency.
RESUMO
The assessment of glacier mass budget is crucial for assessing water reserves stored in glaciers. Derived glacier mass changes in the Muztag Ata and Kongur Tagh (MAKT) region in the eastern Pamir, northwestern China, is helpful in improving our knowledge of the dynamics of glaciers under a changing climate in High Mountain Asia. Here, glacier area and mass changes derived from remote sensing data are investigated for the period 1971/76-2013/14 for glaciers in MAKT. We have used ASTER images (2013/14), Cartosat-1 (2014) and Landsat, SRTM (Shuttle Radar Terrain Mission) digital elevation model (DEM) (2000), topographic maps (1971/76) and the first and second Chinese glacier inventories (CGIs). Our results indicated that the glacier area of MAKT decreased from 1018.3 ± 12.99 km(2) in 1971/76 to 999.2 ± 31.22 km(2) in 2014 (-1.9 ± 0.2%). Weak area shrinkage of glaciers by 2.5 ± 0.5 km(2) (0.2 ± 0.1%) happened after 2000 and the period 2009-2014 even saw a slight expansion by 0.5 ± 0.1 km(2) (0.1 ± 0.0%). The glaciers in this region have experienced an overall loss of -6.99 ± 0.80 km(3) in ice volume or -0.15 ± 0.12 m water equivalent (w.e.) a-1 from 1971/76 to 2013/14. The mass budget of MAKT was -0.19 ± 0.19 m w.e. a-1 for the period ~1971/76-1999 and -0.14 ± 0.24 m w.e. a-1 during 1999-2013/2014. Similar to previous studies, there has been little mass change in the Pamir over recent decades despite such uncertainties. Glacier mass change showed spatial and temporal heterogeneity, with strong mass loss on debris-covered glaciers with an average of -0.32 ± 0.12 m w.e. a-1 from the 1970s to 2013/14.