Fracto-eutectogels: SDS fractal dendrites via counterion condensation in a deep eutectic solvent.

Glyceline, a deep eutectic solvent comprising glycerol and choline chloride, is a green nonaqueous solvent with potential industrial applications. Molecular mechanisms of surfactant self-assembly in deep eutectic solvents are expected to differ from those in their constituent polar components and are not well understood. Here we report the observation of self-assembled SDS fractal dendrites with dimensions up to ∼mm in glyceline at SDS concentrations as low as cSDS ∼ 0.1 wt%. The prevalence of these dendritic fractal aggregates led to the formation of a gel phase at SDS concentrations above ≥1.9 wt% (the critical gelation concentration cCGC). The gel microscopic structure was visualised using polarised light microscopy (PLM); rheology measurements confirmed the formation of a colloidal gel, where the first normal stress difference was negative and the elastic modulus was dominant. Detailed nano-structural characterisation by small-angle neutron scattering (SANS) further confirmed the presence of fractal aggregates. Such SDS aggregation or gelation has not been observed in water at such low surfactant concentrations, whereas SDS has been reported to form lamellar aggregates in glycerol (a component of glyceline). We attribute the formation of the SDS fractal dendrites to the condensation of counterions (i.e. the choline ions) around the SDS aggregates - a diffusion-controlled process, leading to the aggregate morphology observed. These unprecedented results shed light on the molecular mechanisms of surfactant self-assembly in deep eutectic solvents, important to their application in industrial formulation.

Digital photographic technique for the production of an artificial eye.

The use of hand painting an iris button using oil paint remains the conventional method of artificial eye manufacturing. The authors found that replacing this technique with a digital photograph taken of a patient's unaffected eye offers several advantages over the conventional method but the process from capture to print must be standardised and colour accurate. The authors of this paper suggest a tried and tested formulated photographic process of capture and printing prior to polymerisation. It discusses issues that can arise and how these can be overcome in order to achieve a high-quality print that can be used to produce a 'life like' ocular prosthesis.

Charge regulation of nonpolar colloids.

Individual colloids often carry a charge as a result of the dissociation (or adsorption) of weakly-ionized surface groups. The magnitude depends on the precise chemical environment surrounding a particle, which in a concentrated dispersion is a function of the colloid packing fraction η. Theoretical studies have suggested that the effective charge Zeff in regulated systems could, in general, decrease with increasing η. We test this hypothesis for nonpolar dispersions by determining Zeff(η) over a wide range of packing fractions (10-5 ≤ η ≤ 0.3) using a combination of small-angle X-ray scattering and electrophoretic mobility measurements. All dispersions remain entirely in the fluid phase regime. We find a complex dependence of the particle charge as a function of the packing fraction, with Zeff initially decreasing at low concentrations before finally increasing at high η. We attribute the non-monotonic density dependence to a crossover from concentration-independent screening at low η, to a high packing fraction regime in which counterions outnumber salt ions and electrostatic screening becomes η-dependent. The efficiency of charge stabilization at high concentrations may explain the unusually high stability of concentrated nanoparticle dispersions which has been reported.

Composition inversion in mixtures of binary colloids and polymer.

Understanding the phase behaviour of mixtures continues to pose challenges, even for systems that might be considered "simple." Here, we consider a very simple mixture of two colloidal and one non-adsorbing polymer species, which can be simplified even further to a size-asymmetrical binary mixture, in which the effective colloid-colloid interactions depend on the polymer concentration. We show that this basic system exhibits surprisingly rich phase behaviour. In particular, we enquire whether such a system features only a liquid-vapor phase separation (as in one-component colloid-polymer mixtures) or whether, additionally, liquid-liquid demixing of two colloidal phases can occur. Particle-resolved experiments show demixing-like behaviour, but when combined with bespoke Monte Carlo simulations, this proves illusory, and we reveal that only a single liquid-vapor transition occurs. Progressive migration of the small particles to the liquid phase as the polymer concentration increases gives rise to composition inversion-a maximum in the large particle concentration in the liquid phase. Close to criticality, the density fluctuations are found to be dominated by the larger colloids.

Leaf chlorophyll content as a proxy for leaf photosynthetic capacity.

Improving the accuracy of estimates of forest carbon exchange is a central priority for understanding ecosystem response to increased atmospheric CO2 levels and improving carbon cycle modelling. However, the spatially continuous parameterization of photosynthetic capacity (Vcmax) at global scales and appropriate temporal intervals within terrestrial biosphere models (TBMs) remains unresolved. This research investigates the use of biochemical parameters for modelling leaf photosynthetic capacity within a deciduous forest. Particular attention is given to the impacts of seasonality on both leaf biophysical variables and physiological processes, and their interdependent relationships. Four deciduous tree species were sampled across three growing seasons (2013-2015), approximately every 10 days for leaf chlorophyll content (ChlLeaf ) and canopy structure. Leaf nitrogen (NArea ) was also measured during 2014. Leaf photosynthesis was measured during 2014-2015 using a Li-6400 gas-exchange system, with A-Ci curves to model Vcmax. Results showed that seasonality and variations between species resulted in weak relationships between Vcmax normalized to 25°C (Vcmax25) and NArea (R2  = 0.62, P < 0.001), whereas ChlLeaf demonstrated a much stronger correlation with Vcmax25 (R2  = 0.78, P < 0.001). The relationship between ChlLeaf and NArea was also weak (R2  = 0.47, P < 0.001), possibly due to the dynamic partitioning of nitrogen, between and within photosynthetic and nonphotosynthetic fractions. The spatial and temporal variability of Vcmax25 was mapped using Landsat TM/ETM satellite data across the forest site, using physical models to derive ChlLeaf . TBMs largely treat photosynthetic parameters as either fixed constants or varying according to leaf nitrogen content. This research challenges assumptions that simple NArea -Vcmax25 relationships can reliably be used to constrain photosynthetic capacity in TBMs, even within the same plant functional type. It is suggested that ChlLeaf provides a more accurate, direct proxy for Vcmax25 and is also more easily retrievable from satellite data. These results have important implications for carbon modelling within deciduous ecosystems.

X-ray reflectivity reveals ionic structure at liquid crystal-aqueous interfaces.

Here X-ray reflectivity has been used to determine the structure of liquid crystal monolayers for different cyanobiphenyl homologues supported on aqueous solutions of two different salt species. Sodium iodide induces homeotropic ordering for all of the monolayer forming liquid crystal homologues studied here, and forms a Stern layer of iodide ions at the liquid crystal cyano headgroup, similar to the case of lipids or surfactants supported on electrolyte solutions. The liquid crystal headgroups were also found to penetrate into the water surface when binding with iodide ions. Sodium bromide, however, does not form the same localisation of ions close to a liquid crystal monolayer, and instead appears to produce no noticeable change in the scattering length density of the liquid crystal monolayer compared to pure water. However, on further compression the X-ray reflectivity dramatically changes, revealing the emergence of the so-called "trilayer" structure for 5CB and 8CB. This transition occurs at a lower areal density for sodium bromide than for pure water, and unlike for the uncompressed film, a layer of bromide ions was found at the trilayer-water interface.

Factors Associated with Shiga Toxin-Producing Escherichia coli Shedding by Dairy and Beef Cattle.

UNLABELLED: Shiga toxin-producing Escherichia coli (STEC) is an important foodborne pathogen that can cause hemorrhagic colitis and hemolytic-uremic syndrome. Cattle are the primary reservoir for STEC, and food or water contaminated with cattle feces is the most common source of infections in humans. Consequently, we conducted a cross-sectional study of 1,096 cattle in six dairy herds (n = 718 animals) and five beef herds (n = 378 animals) in the summers of 2011 and 2012 to identify epidemiological factors associated with shedding. Fecal samples were obtained from each animal and cultured for STEC. Multivariate analyses were performed to identify risk factors associated with STEC positivity. The prevalence of STEC was higher in beef cattle (21%) than dairy cattle (13%) (odds ratio [OR], 1.76; 95% confidence interval [CI], 1.25, 2.47), with considerable variation occurring across herds (range, 6% to 54%). Dairy cattle were significantly more likely to shed STEC when the average temperature was >28.9°C 1 to 5 days prior to sampling (OR, 2.5; 95% CI, 1.25, 4.91), during their first lactation (OR, 1.8; 95% CI, 1.1, 2.8), and when they were <30 days in milk (OR, 3.9; 95% CI, 2.1, 7.2). These data suggest that the stress or the negative energy balance associated with lactation may result in increased STEC shedding frequencies in Michigan during the warm summer months. Future prevention strategies aimed at reducing stress during lactation or isolating high-risk animals could be implemented to reduce herd-level shedding levels and avoid transmission of STEC to susceptible animals and people. IMPORTANCE: STEC shedding frequencies vary considerably across cattle herds in Michigan, and the shedding frequency of strains belonging to non-O157 serotypes far exceeds the shedding frequency of O157 strains, which is congruent with human infections in the state. Dairy cattle sampled at higher temperatures, in their first lactation, and early in the milk production stage were significantly more likely to shed STEC, which could be due to stress or a negative energy balance. Future studies should focus on the isolation of high-risk animals to decrease herd shedding levels and the potential for contamination of the food supply.

Molecular phylogeny and genome size evolution of the genus Betula (Betulaceae).

BACKGROUND AND AIMS: Betula L. (birch) is a genus of approx. 60 species, subspecies or varieties with a wide distribution in the northern hemisphere, of ecological and economic importance. A new classification of Betula has recently been proposed based on morphological characters. This classification differs somewhat from previously published molecular phylogenies, which may be due to factors such as convergent evolution, hybridization, incomplete taxon sampling or misidentification of samples. While chromosome counts have been made for many species, few have had their genome size measured. The aim of this study is to produce a new phylogenetic and genome size analysis of the genus. METHODS: Internal transcribed spacer (ITS) regions of nuclear ribosomal DNA were sequenced for 76 Betula samples verified by taxonomic experts, representing approx. 60 taxa, of which approx. 24 taxa have not been included in previous phylogenetic analyses. A further 49 samples from other collections were also sequenced, and 108 ITS sequences were downloaded from GenBank. Phylogenetic trees were built for these sequences. The genome sizes of 103 accessions representing nearly all described species were estimated using flow cytometry. KEY RESULTS: As expected for a gene tree of a genus where hybridization and allopolyploidy occur, the ITS tree shows clustering, but not resolved monophyly, for the morphological subgenera recently proposed. Most sections show some clustering, but species of the dwarf section Apterocaryon are unusually scattered. Betula corylifolia (subgenus Nipponobetula) unexpectedly clusters with species of subgenus Aspera Unexpected placements are also found for B. maximowicziana, B. bomiensis, B. nigra and B. grossa Biogeographical disjunctions were found within Betula between Europe and North America, and also disjunctions between North-east and South-west Asia. The 2C-values for Betula ranged from 0·88 to 5·33 pg, and polyploids are scattered widely throughout the ITS phylogeny. Species with large genomes tend to have narrow ranges. CONCLUSIONS: Betula grossa may have formed via allopolyploidization between parents in subgenus Betula and subgenus Aspera. Betula bomiensis may also be a wide allopolyploid. Betula corylifolia may be a parental species of allopolyploids in the subsection Chinenses Placements of B. maximowicziana, B. michauxii and B. nigra need further investigation. This analysis, in line with previous studies, suggests that section Apterocaryon is not monophyletic and thus dwarfism has evolved repeatedly in different lineages of Betula Polyploidization has occurred many times independently in the evolution of Betula.

Non-additivity of pair interactions in charged colloids.

It is general wisdom that the pair potential of charged colloids in a liquid may be closely approximated by a Yukawa interaction, as predicted by the classical Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. We experimentally determine the effective forces in a binary mixture of like-charged particles, of species 1 and 2, with blinking optical tweezers. The measured forces are consistent with a Yukawa pair potential but the (12) cross-interaction is not equal to the geometric mean of the (11) and (22) like-interactions, as expected from DLVO. The deviation is a function of the electrostatic screening length and the size ratio, with the cross-interaction measured being consistently weaker than DLVO predictions. The corresponding non-additivity parameter is negative and grows in magnitude with increased size asymmetry.

Flexible confinement leads to multiple relaxation regimes in glassy colloidal liquids.

Understanding relaxation of supercooled fluids is a major challenge and confining such systems can lead to bewildering behaviour. Here, we exploit an optically confined colloidal model system in which we use reduced pressure as a control parameter. The dynamics of the system are "Arrhenius" at low and moderate pressure, but at higher pressures relaxation is faster than expected. We associate this faster relaxation with a decrease in density adjacent to the confining boundary due to local ordering in the system enabled by the flexible wall.

Counterion condensation on spheres in the salt-free limit.

A highly-charged spherical colloid in a salt-free environment exerts such a powerful attraction on its counterions that a certain fraction condenses onto the surface of a particle. The degree of condensation depends on the curvature of the surface. So, for instance, condensation is triggered on a highly-charged sphere only if the radius exceeds a certain critical radius R*. R* is expected to be a simple function of the volume fraction of particles. To test these predictions, we prepare spherical particles which contain a covalently-bound ionic liquid, which is engineered to dissociate efficiently in a low-dielectric medium. By varying the proportion of ionic liquid to monomer we synthesise nonpolar dispersions of highly-charged spheres which contain essentially no free co-ions. The only ions in the system are counterions generated by the dissociation of surface-bound groups. We study the electrophoretic mobility of this salt-free system as a function of the colloid volume fraction, the particle radius, and the bare charge density and find evidence for extensive counterion condensation. At low electric fields, we observe excellent agreement with Poisson-Boltzmann predictions for counterion condensation on spheres. At high electric fields however, where ion advection is dominant, the electrophoretic mobility is enhanced significantly which we attribute to hydrodynamic stripping of the condensed layer of counterions from the surface of the particle.

The effect of boundary adaptivity on hexagonal ordering and bistability in circularly confined quasi hard discs.

The behaviour of materials under spatial confinement is sensitively dependent on the nature of the confining boundaries. In two dimensions, confinement within a hard circular boundary inhibits the hexagonal ordering observed in bulk systems at high density. Using colloidal experiments and Monte Carlo simulations, we investigate two model systems of quasi hard discs under circularly symmetric confinement. The first system employs an adaptive circular boundary, defined experimentally using holographic optical tweezers. We show that deformation of this boundary allows, and indeed is required for, hexagonal ordering in the confined system. The second system employs a circularly symmetric optical potential to confine particles without a physical boundary. We show that, in the absence of a curved wall, near perfect hexagonal ordering is possible. We propose that the degree to which hexagonal ordering is suppressed by a curved boundary is determined by the "strictness" of that wall.

Charge generation in low-polarity solvents: poly(ionic liquid)-functionalized particles.

We present a straightforward strategy for the synthesis of highly charged poly(ionic liquid)-functionalized particles in low-polarity solvents. A series of cationic liquid monomers consisting of a tetraalkyl ammonium cation and a fluorinated tetrakis[phenyl] borate anion linked, via a C3-alkyl chain, to a methacrylate unit were synthesized. The addition of this ionic monomer to a conventional dispersion polymerization of methyl methacrylate and methacrylic acid at 80 °C in a mixed dodecane/hexane solvent yielded spherical, highly monodisperse particles with mean diameters of between ~50 and 2500 nm with high electrophoretic mobility and stability in nonpolar solvents such as dodecane. The surface potential in dodecane could be adjusted in the range from 0 to 180 ± 9 mV by altering the ratio of ionic monomer to methacrylate monomers. The particles open up new opportunities for the electrostatic assembly of nanoparticles and organized structures in nonpolar environments.

IMproving facial PRosthesis construction with contactlESs Scanning and Digital workflow (IMPRESSeD): study protocol for a feasibility crossover randomised controlled trial of digital versus conventional manufacture of facial prostheses in patients with orbital or nasal facial defects.

BACKGROUND: Facial prostheses can have a profound impact on patients' appearance, function and quality of life. There has been increasing interest in the digital manufacturing of facial prostheses which may offer many benefits to patients and healthcare services compared with conventional manufacturing processes. Most facial prosthesis research has adopted observational study designs with very few randomised controlled trials (RCTs) documented. There is a clear need for a well-designed RCT to compare the clinical and cost-effectiveness of digitally manufactured facial prostheses versus conventionally manufactured facial prostheses. This study protocol describes the planned conduct of a feasibility RCT which aims to address this knowledge gap and determine whether it is feasible to conduct a future definitive RCT. METHODS: The IMPRESSeD study is a multi-centre, 2-arm, crossover, feasibility RCT with early health technology assessment and qualitative research. Up to 30 participants with acquired orbital or nasal defects will be recruited from the Maxillofacial Prosthetic Departments of participating NHS hospitals. All trial participants will receive 2 new facial prostheses manufactured using digital and conventional manufacturing methods. The order of receiving the facial prostheses will be allocated centrally using minimisation. The 2 prostheses will be made in tandem and marked with a colour label to mask the manufacturing method to the participants. Participants will be reviewed 4 weeks following the delivery of the first prosthesis and 4 weeks following the delivery of the second prosthesis. Primary feasibility outcomes include eligibility, recruitment, conversion, and attrition rates. Data will also be collected on patient preference, quality of life and resource use from the healthcare perspective. A qualitative sub-study will evaluate patients' perception, lived experience and preference of the different manufacturing methods. DISCUSSION: There is uncertainty regarding the best method of manufacturing facial prostheses in terms of clinical effectiveness, cost-effectiveness and patient acceptability. There is a need for a well-designed RCT to compare digital and conventional manufacturing of facial prostheses to better inform clinical practice. The feasibility study will evaluate key parameters needed to design a definitive trial and will incorporate early health technology assessment and a qualitative sub-study to identify the potential benefits of further research. TRIAL REGISTRATION: ISRCTN ISRCTN10516986). Prospectively registered on 08 June 2021,  https://www.isrctn.com/ISRCTN10516986 .

A cross-over, randomised feasibility study of digitally printed versus hand-painted artificial eyes in adults: PERSONAL-EYE-S - a study protocol [version 2; peer review: 2 approved].

Background/objectives: Around 11,500 artificial eyes are required yearly for new and existing patients. Artificial eyes have been manufactured and hand-painted at the National Artificial Eye Service (NAES) since 1948, in conjunction with approximately 30 local artificial eye services throughout the country. With the current scale of demand, services are under significant pressure. Manufacturing delays as well as necessary repainting to obtain adequate colour matching, may severely impact a patient's rehabilitation pathway to a normal home, social and work life. However, advances in technology mean alternatives are now possible. The aim of this study is to establish the feasibility of conducting a large-scale study of the effectiveness and cost-effectiveness of digitally printed artificial eyes compared to hand-painted eyes. Methods: A cross-over, randomised feasibility study evaluating a digitally-printed artificial eye with a hand-painted eye, in patients aged ≥18 years with a current artificial eye. Participants will be identified in clinic, via ophthalmology clinic databases and two charity websites. Qualitative interviews will be conducted in the later phases of the study and focus on opinions on trial procedures, the different artificial eyes, delivery times, and patient satisfaction. Discussion: Findings will inform the feasibility, and design, of a larger fully powered randomised controlled trial. The long-term aim is to create a more life-like artificial eye in order to improve patients' initial rehabilitation pathway, long term quality of life, and service experience. This will allow the transition of research findings into benefit to patients locally in the short term and National Health Service wide in the medium to long term._. ISRCTN registration: ISRCTN85921622 (prospectively registered on 17/06/2021).

Changes in Distal Tibial Microarchitecture During Eight Weeks of U.S. Army Basic Combat Training Differ by Sex and Race.

Basic combat training (BCT) is a physically rigorous period at the beginning of a soldier's career that induces bone formation in the tibia. Race and sex are determinants of bone properties in young adults but their influences on changes in bone microarchitecture during BCT are unknown. The purpose of this work was to determine the influence of sex and race on changes in bone microarchitecture during BCT. Bone microarchitecture was assessed at the distal tibia via high-resolution peripheral quantitative computed tomography at the beginning and end of 8 weeks of BCT in a multiracial cohort of trainees (552 female, 1053 male; mean ± standard deviation [SD] age = 20.7 ± 3.7 years) of which 25.4% self-identified as black, 19.5% as race other than black or white (other races combined), and 55.1% as white. We used linear regression models to determine whether changes in bone microarchitecture due to BCT differed by race or sex, after adjusting for age, height, weight, physical activity, and tobacco use. We found that trabecular bone density (Tb.BMD), thickness (Tb.Th), and volume (Tb.BV/TV), as well as cortical BMD (Ct.BMD) and thickness (Ct.Th) increased following BCT in both sexes and across racial groups (+0.32% to +1.87%, all p < 0.01). Compared to males, females had greater increases in Tb.BMD (+1.87% versus +1.40%; p = 0.01) and Tb.Th (+0.87% versus +0.58%; p = 0.02), but smaller increases in Ct.BMD (+0.35% versus +0.61%; p < 0.01). Compared to black trainees, white trainees had greater increases in Tb.Th (+0.82% versus +0.61%; p = 0.03). Other races combined and white trainees had greater increases in Ct.BMD than black trainees (+0.56% and + 0.55% versus +0.32%; both p ≤ 0.01). Changes in distal tibial microarchitecture, consistent with adaptive bone formation, occur in trainees of all races and sexes, with modest differences by sex and race. Published 2023. This article is a U.S. Government work and is in the public domain in the USA. JBMR Plus published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research.

Herd-level determinants of bovine leukaemia virus prevalence in dairy farms.

The prevalence of bovine leukaemia virus (BLV) was determined in 113 Michigan dairy herds by ELISA testing for anti-BLV antibodies in milk. Additionally, an interview regarding management practices with cooperating herd managers identified farm-level variables thought to be associated with prevalence of BLV. Twenty-three risk factors (P ≤ 0·1) were identified on one-way ANOVA or simple linear regression. Multivariate analysis identified several management practices whose predictive value for increased prevalence of BLV may relate to transmission among herd mates, e.g. reuse of hypodermic needles, lack of fly control, gouge dehorning and increased use of injections in dry cows. Additionally, exclusive breeding of heifers with artificial insemination was associated with decreased BLV prevalence, as compared with at least some use of natural service by a bull. Although intervention studies are needed before causal relationships can be concluded, and unaccounted variables related to transmission exist among dairy herds, these findings suggest management practices that may help dairy producers reduce the transmission of BLV within their herds.

The effect of bovine leukemia virus on dairy cow longevity.

Bovine leukemia virus (BLV) is a retrovirus of cattle that infects approximately 45% of all US dairy cattle, with about 90% of US dairy herds having at least one infected animal. Studies have found BLV infection to be associated with multiple measures of decreased immune function, which may explain the observed economic losses from milk production, decreased cow longevity, and predisposition to lymphoma and other diseases. Our objective was to measure the association between BLV infection and cow longevity in dairy cow operations. Ninety-one dairy herds from 9 US states volunteered to participate in this study. Milking dairy cows (n = 3,611) were tested for BLV antibodies using an ELISA milk test, and their presence in the herd was monitored for an average of 29 mo. The survival analysis controlled for herd and lactation number. Cows sold for dairy purposes were excluded, and individual cow results were not shared with producers so as not to influence culling decisions. Overall, 47.1% (1,701/3,611) of cows were BLV-positive by ELISA. The significant hazard ratio of 1.30 indicated that positive cows were 30% more likely than their negative herdmates to die or be culled during the monitoring period. These results are consistent with other studies in finding a negative effect of BLV infection on cow lifespan.

Cross-sectional study to describe bovine leukemia virus herd and within-herd ELISA prevalence and bovine leukemia virus proviral load of convenience-sampled Kansas beef cow-calf herds.

OBJECTIVE: Determine bovine leukemia virus (BLV) seroprevalence of adult female cattle in Eastern Kansas beef herds and the proviral load (PVL) of those cattle found to be ELISA positive. ANIMALS: Convenience sample of 2,845 cows from 44 beef herds. PROCEDURES: BLV serostatus was determined using an ELISA antibody test (gp-51; IDEXX). BLV quantitative PCR (qPCR) status and PVL were determined utilizing a qPCR test (SS1 qPCR test; CentralStar Laboratories). The association of age, herd size, and body condition score (BCS) category on the probability of being BLV positive was evaluated with a multiple variable logistic regression analysis that used BLV status as a binary outcome, herd nested within ranch as a random effect, and BCS, herd size, and age category as fixed effects. RESULTS: Forty-two of 44 herds had at least 1 BLV ELISA-positive cow (95.5% herd seroprevalence). Overall, 1,564 of the 2,845 cows were BLV ELISA positive (55.0% individual animal prevalence). No association between BLV ELISA status and herd size or BCS was identified. When evaluated by age, the model-adjusted probability of being BLV ELISA positive was lowest for heifers (1 year of age, first parity) and increased until 5 to 6 years of age. Of the 1,564 ELISA-positive animals, 838 were qPCR positive (53.6%). The model-adjusted probability of being qPCR positive was not associated with age, herd size, or BCS category. CLINICAL RELEVANCE: This study indicated that BLV-seropositive status both as a herd classification and individual animal classification was very common in this population. Because the percentage of BLV-seropositive cows varied between herds and by age, this study provides evidence that it is essential for investigators to control for herd and age in any analysis of the association of BLV serostatus and health and production outcomes of interest. Some BLV ELSIA-seropositive cows were classified as BLV negative by qPCR, and risk factors may differ between classification status by ELISA and qPCR.

Identification of BoLA Alleles Associated with BLV Proviral Load in US Beef Cows.

Bovine leukemia virus (BLV) causes enzootic bovine leukosis, the most common neoplastic disease in cattle. Previous work estimates that 78% of US beef operations and 38% of US beef cattle are seropositive for BLV. Infection by BLV in a herd is an economic concern for producers as evidence suggests that it causes an increase in cost and a subsequent decrease in profit to producers. Studies investigating BLV in dairy cattle have noted disease resistance or susceptibility, measured by a proviral load (PVL) associated with specific alleles of the bovine leukocyte antigen (BoLA) DRB3 gene. This study aims to investigate the associations between BoLA DRB3 alleles and BLV PVL in beef cattle. Samples were collected from 157 Midwest beef cows. BoLA DRB3 alleles were identified and compared with BLV PVL. One BoLA DRB3 allele, *026:01, was found to be associated with high PVL in relation to the average of the sampled population. In contrast, two alleles, *033:01 and *002:01, were found to be associated with low PVL. This study provides evidence of a relationship between BoLA DRB3 alleles and BLV PVL in US beef cows.