Outpatient Video Visits During the COVID-19 Pandemic: Cross-Sectional Survey Study of Patients' Experiences and Characteristics.

BACKGROUND: During the first lockdown of the COVID-19 pandemic, an exponential increase in video consultations replacing in-person outpatient visits was observed in hospitals. Insight into patients' experiences with this type of consultation is helpful for a broad, sustainable, and patient-centered implementation of video consultation. OBJECTIVE: This study aims to examine patients' experiences with video consultation during the COVID-19 pandemic and identify discriminative patient and consultation characteristics to determine when video consultation is most feasible. METHODS: A cross-sectional survey study was conducted. Patients aged ≥18 years and scheduled for a video consultation at the outpatient clinic of a Dutch university medical center from August 2020 to December 2020 for all medical specialties were eligible. Patients' experiences were explored through a study-specific survey using descriptive quantitative statistics. Open-ended questions were qualitatively analyzed and thematically categorized into appreciated aspects and aspects for improvement. Discriminative patient and consultation characteristics were identified using 3 distinctive survey items. Characteristics of patients who scored and those who did not score all 3 items positively were analyzed using binary logistic regression. RESULTS: A total of 1054 patients were included in the analysis. Most patients (964/1054, 91.46%) were satisfied with their video consultation, with a mean overall grade of 8.6 (SD 1.3) of 10. In the qualitative analyses, 70.02% (738/1054) of the patients cited aspects they appreciated and 44.97% (474/1054) mentioned aspects for improvement during their consultation. Patients with better self-rated health reported a positive evaluation significantly more often (P=.001), which also held true for other medical specialties (vs surgical and nonsurgical specialties; P<.001). CONCLUSIONS: Video consultation was perceived as highly satisfactory by patients during the COVID-19 pandemic, with the best experience reported by healthy participants and those undergoing their first consultation. Appreciated aspects are mainly at the individual professional level, organizational level, and innovation level itself. The aspects that were mentioned for improvement can be changed for the better.

Advancements in diagnosing oral potentially malignant disorders: leveraging Vision transformers for multi-class detection.

OBJECTIVES: Diagnosing oral potentially malignant disorders (OPMD) is critical to prevent oral cancer. This study aims to automatically detect and classify the most common pre-malignant oral lesions, such as leukoplakia and oral lichen planus (OLP), and distinguish them from oral squamous cell carcinomas (OSCC) and healthy oral mucosa on clinical photographs using vision transformers. METHODS: 4,161 photographs of healthy mucosa, leukoplakia, OLP, and OSCC were included. Findings were annotated pixel-wise and reviewed by three clinicians. The photographs were divided into 3,337 for training and validation and 824 for testing. The training and validation images were further divided into five folds with stratification. A Mask R-CNN with a Swin Transformer was trained five times with cross-validation, and the held-out test split was used to evaluate the model performance. The precision, F1-score, sensitivity, specificity, and accuracy were calculated. The area under the receiver operating characteristics curve (AUC) and the confusion matrix of the most effective model were presented. RESULTS: The detection of OSCC with the employed model yielded an F1 of 0.852 and AUC of 0.974. The detection of OLP had an F1 of 0.825 and AUC of 0.948. For leukoplakia the F1 was 0.796 and the AUC was 0.938. CONCLUSIONS: OSCC were effectively detected with the employed model, whereas the detection of OLP and leukoplakia was moderately effective. CLINICAL RELEVANCE: Oral cancer is often detected in advanced stages. The demonstrated technology may support the detection and observation of OPMD to lower the disease burden and identify malignant oral cavity lesions earlier.

A learning curve in 3D virtual surgical planned orthognathic surgery.

OBJECTIVES: To assess the surgical accuracy of 3D virtual surgical planned orthognathic surgery and the influence of posterior impaction and magnitude of the planned movements on a possible learning curve. MATERIALS AND METHODS: This prospective cohort study included subjects who underwent bimaxillary surgery between 2016 and 2020 at the Department of Oral and Maxillofacial Surgery of the Radboud University Medical Center, Nijmegen. 3D virtual surgical planning (VSP) was performed with CBCT data and digitalized dentition data. By using voxel-based matching with pre- and postoperative CBCT data the maxillary movements were quantified in six degrees of freedom. The primary outcome variable, surgical accuracy, was defined as the difference between the planned and achieved maxillary movement. RESULTS: Based on 124 subjects, the surgical accuracy increased annually from 2016 to 2020 in terms of vertical translations (0.82 ± 0.28 mm; p = 0.038) and yaw rotations (0.68 ± 0.22°; p = 0.028). An increase in surgical accuracy was observed when combining all six degrees of freedom (p = 0.021) and specifically between 2016 and 2020 (p = 0.004). An unfavorable learning curve was seen with posterior impaction and with a greater magnitude of movements. CONCLUSION: The present study demonstrated a significant increase in surgical accuracy annually and therefore supports the presence of a learning curve. CLINICAL RELEVANCE: Cases with planned maxillary posterior impaction and/or a great magnitude of jaw movements should be transferred from the 3D VSP with extra care to obtain a satisfactory surgical accuracy.

What is the impact of miniscrew-assisted rapid palatal expansion on the midfacial soft tissues? A prospective three-dimensional stereophotogrammetry study.

OBJECTIVES: To evaluate the midfacial soft tissue changes of the face in patients treated with miniscrew-assisted rapid palatal expansion (MARPE). MATERIALS AND METHODS: 3D facial images and intra-oral scans (IOS) were obtained before expansion (T0), immediately after completion of expansion (T1), and 1 year after expansion (T2). The 3D images were superimposed and two 3D distance maps were generated to measure the midfacial soft tissue changes: immediate effects between timepoints T0 and T1 and overall effects between T0 and T2. Changes of the alar width were also measured and dental expansion was measured as the interpremolar width (IPW) on IOS. RESULTS: Twenty-nine patients (22 women, 7 men, mean age 25.9 years) were enrolled. The soft tissue in the regions of the nose, left of philtrum, right of philtrum, and upper lip tubercle demonstrated a statistically significant anterior movement of 0.30 mm, 0.93 mm, 0.74 mm, and 0.81 mm, respectively (p < 0.01) immediately after expansion (T0-T1). These changes persisted as an overall effect (T0-T2). The alar width initially increased by 1.59 mm, and then decreased by 0.08 mm after 1 year, but this effect was not significant. The IPW increased by 4.58 mm and remained stable 1 year later. There was no significant correlation between the increase in IPW and alar width (r = 0.35, p = 0.06). CONCLUSIONS: Our findings indicate that MARPE results in significant but small changes of the soft tissue in the peri-oral and nasal regions. However, the clinical importance of these findings is limited. CLINICAL RELEVANCE: MARPE is an effective treatment modality to expand the maxilla, incurring only minimal and clinically insignificant changes to the midfacial soft tissues.

The role of muscular traction in the occurrence of skeletal relapse after advancement bilateral sagittal split osteotomy (BSSO): A systematic review.

The aim of this systematic review was (i) to determine the role of muscular traction in the occurrence of skeletal relapse after advancement BSSO and (ii) to investigate the effect of advancement BSSO on the perimandibular muscles. This systematic review reports in accordance with the recommendations proposed by the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. Electronic database searches were performed in the databases MEDLINE, Embase and Cochrane Library. Inclusion criteria were as follows: assessment of relapse after advancement BSSO; assessment of morphological and functional change of the muscles after advancement BSSO; and clinical studies on human subjects. Exclusion criteria were as follows: surgery other than advancement BSSO; studies in which muscle activity/traction was not investigated; and case reports with a sample of five cases or fewer, review articles, meta-analyses, letters, congress abstracts or commentaries. Of the initial 1006 unique articles, 11 studies were finally included. In four studies, an intervention involving the musculature was performed with subsequent assessment of skeletal relapse. The changes in the morphological and functional properties of the muscles after BSSO were studied in seven studies. The findings of this review demonstrate that the perimandibular musculature plays a role in skeletal relapse after advancement BSSO and may serve as a target for preventive strategies to reduce this complication. However, further research is necessary to (i) develop a better understanding of the role of each muscle group, (ii) to develop new therapeutic strategies and (iii) to define criteria that allow identification of patients at risk.

Reproducibility of Manual Transfer of the Clinical Natural Head Position: Influence on the Soft Tissue and Hard Tissue Position of 3-Dimensional Virtual Surgical Planning.

PURPOSE: The purpose of this study was to assess the reproducibility of manually transferring the clinical natural head position (NHP) to the 3-dimensional (3D) virtual surgical planning and its subsequent influence on the soft tissue and maxillary hard tissue position. METHODS: A retrospective cohort study was set up. The study population consisted of subjects who underwent bimaxillary osteotomies between 2016 and 2020 at the Department of Oral and Maxillofacial Surgery in Radboud University Medical Centre (Nijmegen, the Netherlands). Cone beam computed tomography scans, dentition data, and clinical photographs were acquired 4 weeks before surgery. Two attempts (NHP1 and NHP2) were performed by a single examiner to manually transfer the NHP. 3D transformation matrices were used to quantify the transferred NHP in 3 degrees of freedom (pitch, roll, and yaw). Landmarks and surface-based matching were used to quantify the influence on the soft tissue and hard tissue positions in 6 degrees of freedom. The primary outcome variable was the reproducibility of manually aligning the NHP. The secondary and tertiary outcome variables were the effect of the reproducibility of the manually aligned NHP on the soft tissue and hard tissue displacements in the 3D virtual surgical planning. RESULTS: The study population consisted of 109 subjects: 37 males (33.9%) and 72 females (66.1%) with a mean age of 29.1 ± 10.3 years (range, 17.0 to 59.0). The manual transfer of pitch alignment (2.24 ± 1.64°; 95% confidence interval [CI], 1.93 to 2.55) was significantly less reproducible than the roll (0.56 ± 0.44°; 95% CI, 0.48 to 0.64; P < .001) and yaw (0.67 ± 0.92°; 95% CI, 0.50 to 0.85; P < .001). Subsequently, this alignment error influenced the position of the maxilla (incisal point) and soft tissue menton by 0.85 ± 0.86 mm and 1.01 ± 1.00 mm vertically and 0.78 ± 1.10 mm and 0.80 ± 1.18 mm sagittally. CONCLUSIONS: The present study demonstrated that the manual transfer of the NHP from the clinical situation to the virtual environment influenced the soft tissue and hard tissue position and that a more reproducible method of transferring the clinical NHP is recommended.

Is the pattern of mandibular asymmetry in mild craniofacial microsomia comparable to non-syndromic class II asymmetry?

OBJECTIVES: To compare the characteristics of mandibular asymmetry in patients with unilateral craniofacial microsomia (CFM) and class II asymmetry. MATERIALS AND METHODS: Pretreatment cone-beam computed tomography of consecutive adults with Pruzansky-Kaban type I and IIA CFM (CFM group) was analyzed by 3D cephalometry. Fourteen mandibular landmarks and two dental landmarks were identified. The mandibular size and positional asymmetry were calculated by using landmark-based linear and volumetric measurements, in terms of asymmetry ratios (affected/non-affected side) and absolute differences (affected - non-affected side). Results were compared with non-syndromic class II with matched severity of chin deviation (Class II group). Statistical analyses included independent t test, paired t test, chi-square test, and ANOVA. RESULTS: CFM group (n, 21; mean age, 20.4 ± 2.5 years) showed significantly larger size asymmetry in regions of mandibular body, ramus, and condyle compared to Class II group (n, 21; mean age, 27.8 ± 5.9 years) (p < 0.05). The curvature of mandibular body was asymmetric in CFM. Regarding the positional asymmetry of mandibular body, while a comparable transverse shift and a negligible yaw rotation were found among the two groups, the roll rotation in CFM was significantly greater as well as the occlusal (6.06° vs. 4.17°) and mandibular (7.84° vs. 2.80°) plane cants (p < 0.05). CONCLUSIONS: Mild CFM showed significantly more severe size asymmetry and roll rotation in mandible than non-CFM class II asymmetry. CLINICAL RELEVANCE: To improve the mandibular size and positional asymmetry in CFM, adjunct hard tissue augmentation or reduction in addition to OGS orthodontics with a meticulous roll and yaw planning is compulsory, which is expected to be distinct from treating non-CFM class II asymmetry.

Efficacy of Miniscrew-Assisted Rapid Palatal Expansion (MARPE) in late adolescents and adults with the Dutch Maxillary Expansion Device: a prospective clinical cohort study.

OBJECTIVES: To provide a higher degree of evidence on the efficacy of Miniscrew-Assisted Rapid Palatal Expansion (MARPE) in late adolescents and adults, thereby applying the Dutch Maxillary Expansion Device (D-MED). MATERIALS AND METHODS: D-MED was developed as an individualized, 3D-designed, and fabricated MARPE appliance supported by 4 palatal miniscrews. Patients from the age of 16 onwards with transverse maxillary deficiency were enrolled consecutively. Pre-expansion and immediate post-expansion CBCTs and intra-oral scans were acquired and measurements of skeletal, alveolar, and dental expansion as well as dental and periodontal side-effects were performed. RESULTS: Thirty-four patients were enrolled (8 men, 26 women) with mean age 27.0 ± 9.4 years. A success rate of 94.1% was achieved (32/34 patients). The mean expansion duration, or mean observation time, was 31.7 ± 8.0 days. The mean expansion at the maxillary first molars (M1) and first premolars (P1) was 6.56 ± 1.70 mm and 4.19 ± 1.29 mm, respectively. The expansion was 60.4 ± 20.1% skeletal, 8.1 ± 27.6% alveolar, and 31.6 ± 20.1% dental at M1 and 92.2 ± 14.5% skeletal, 0.0 ± 18.6% alveolar, and 7.8 ± 17.7% dental at P1, which was both statistically (p < 0.001) and clinically significant. Buccal dental tipping (3.88 ± 3.92° M1; 2.29 ± 3.89° P1), clinical crown height increase (0.12 ± 0.31 mm M1; 0.04 ± 0.22 mm P1), and buccal bone thinning (- 0.31 ± 0.49 mm M1; - 0.01 ± 0.45 mm P1) were observed, while root resorption could not be evaluated. CONCLUSIONS: MARPE by application of D-MED manifested its efficacy in a prospective clinical setting, delivering a high amount of skeletal expansion with limited side-effects in late adolescents and adults. CLINICAL RELEVANCE: Higher quality evidence is supportive of MARPE as a safe and successful non-surgical treatment option for transverse maxillary deficiency.

What is the Oral Health-related Quality of Life following Miniscrew-Assisted Rapid Palatal Expansion (MARPE)? A prospective clinical cohort study.

BACKGROUND: Miniscrew-Assisted Rapid Palatal Expansion (MARPE) is a non-surgical orthodontic treatment for transverse maxillary deficiency. This study aimed to investigate the Oral Health-related Quality of Life (OHRQoL) and pain perception of patients undergoing MARPE treatment. METHODS: 42 consecutive patients (9 men, 33 women) from the age of 16 onwards (mean: 27.4 ± 9.3 years; range 17.1-55.7 years) who received a MARPE treatment were included. OHRQoL was assessed with the short form of the Oral Health Impact Profile (OHIP-14) questionnaire. Patients filled out the questionnaire at baseline (T0) and weekly during the expansion phase (P1) and in the post-expansion phase (P2). Pain intensity was assessed with a Visual Analogue Scale (VAS) questionnaire and filled out daily during expansion, along with a question on the intake of analgesics. The mean weekly and total OHIP-score and OHIP-score per domain were calculated at T0, P1 and P2, as well as mean weekly and total VAS-scores for average pain, maximum pain and analgesics intake during P1. Kruskal-Wallis tests were used to test for differences in OHIP between T0, P1 and P2. The level of significance was set at 0.05. RESULTS: The mean OHIP-score was 10.86 ± 9.71 at T0 and increased to 17.18 ± 10.43 during P1 (p < 0.001), after which it returned to pre-expansion levels, 9.27 ± 7.92 (p = 0.907) during P2. At the domain level, there was a statistically significant increase in OHIP-score at P1 for functional limitation, physical pain, psychological discomfort and social disability. The mean VAS-score for average pain during expansion was 16.00 ± 19.73 mm. Both OHIP-score (25.00 ± 10.25), average pain (33.72 ± 16.88 mm), maximum pain (44.47 ± 17.99 mm) and analgesics intake (59%) were highest at initiation of the expansion and decreased by the end of expansion. CONCLUSIONS: MARPE is a generally well-tolerated expansion treatment. A temporary decline in OHRQoL and moderate pain are present at the start of expansion, followed by a recovery of OHRQoL and very mild pain during the rest of treatment. Clinicians should be aware of the effects of MARPE on patients' quality of life and manage the expected discomfort and impediments with adequate communication and patient education.

Three-Dimensional Analysis of the Condylar Hypoplasia and Facial Asymmetry in Craniofacial Microsomia Using Cone-Beam Computed Tomography.

PURPOSE: To assess the condylar hypoplasia and its correlation with craniofacial deformities in adults with unilateral craniofacial microsomia (CFM). METHODS: Pretreatment cone-beam computed tomography scans of consecutive adults (mean age: 20.4 ± 3.0 years; range: 17.3 to 31.4 years) with Pruzansky-Kaban type I and IIA CFM were reconstructed in 3D. Both condyles were segmented. Asymmetry ratios (affected side/contralateral side) of condylar volume were calculated to indicate the extent of condylar hypoplasia. 3D cephalometry was performed to quantify the maxillomandibular morphology and facial asymmetry. The correlations in between were assessed by using Pearson's or Spearman's correlation coefficients. RESULTS: Thirty-six subjects were enrolled, consisting of 22 subjects with Pruzansky-Kaban type I and 14 subjects with type IIA. The condyles in type IIA group were significantly more hypoplastic in height (asymmetry ratio: 40.69 vs 59.95%, P = .006) and volume (18.16 vs 47.84%, P < .001) compared to type I group. Type IIA group had a significantly smaller SNB value than type I group (72.94° vs 77.41°, P = .012), and a significantly greater facial asymmetry (P < .05). The hypoplastic extent of condylar volume and Pruzansky-Kaban types were significantly correlated with SNB (r = 0.457 and ρ = -0.411, respectively), upper incisor deviation (r = -0.446 and ρ = 0.362), chin deviation (r = -0.477 and ρ = 0.527), upper occlusal plane cant (r = -0.672 and ρ = 0.631), and mandibular plane cant (r = -0.557 and ρ = 0.357, P < .05). CONCLUSION: For unilateral CFM adults, greater condylar hypoplasia in volume along with more severe mandibular retrusion and facial asymmetry objectively indicated a higher scale of Pruzansky-Kaban classification (type IIA). These quantitative distinctions are expected to enhance the diagnostic reliability of CFM.

Efficacy of Miniscrew-Assisted Rapid Palatal Expansion (MARPE) in late adolescents and adults: a systematic review and meta-analysis.

BACKGROUND: Miniscrew-Assisted Rapid Palatal Expansion (MARPE) is a non-surgical treatment for transverse maxillary deficiency. However, there is limited evidence concerning its efficacy. OBJECTIVES: This systematic review aims to evaluate the efficacy of MARPE in late adolescents and adults by assessing success rate and skeletal and dental transverse maxillary expansion, as well as treatment duration, dental and periodontal side effects and soft tissue effects. SEARCH METHODS: Seven electronic databases were searched (MEDLINE, Embase, Cochrane Library, Web of Science, Scopus, ProQuest and ClinicalTrials.gov) without limitations in November 2020. SELECTION CRITERIA: Randomized and non-randomized clinical trials and observational studies on patients from the age of 16 onwards with transverse maxillary deficiency who were treated with MARPE and which included any of the predefined outcomes. DATA COLLECTION AND ANALYSIS: Inclusion eligibility screening, data extraction and risk of bias assessment were performed independently in duplicate. When possible, exploratory meta-analyses of mean differences (MDs) with their 95% confidence intervals (CIs) were conducted, followed by the Grading of Recommendations, Assessment, Development and Evaluation (GRADE) analysis of the evidence quality. RESULTS: Eight articles were included: two prospective and six retrospective observational studies. One study had a moderate risk of bias, whereas seven studies had a serious risk of bias. GRADE quality of evidence was very low. MARPE showed a high success rate (mean: 92.5%; 95%CI: 88.7%-96.3%), resulting in a significant skeletal width increase (MD: 2.33 mm; 95%CI: 1.63 mm-3.03 mm) and dental intermolar width increase (MD: 6.55 mm; 95%CI: 5.50 mm-7.59 mm). A significant increase in dental tipping, a decrease in mean buccal bone thickness and buccal alveolar height, as well as nasal soft tissue change was present (P < 0.05). The mean duration of expansion ranged from 20 to 126 days. LIMITATIONS: One of the main drawbacks was the lack of high-quality prospective studies in the literature. CONCLUSIONS AND IMPLICATIONS: MARPE is a treatment modality that is associated with a high success rate in skeletal and dental maxillary expansion. MARPE can induce dental and periodontal side effects and affect peri-oral soft tissues. Given the serious risk of bias of the included studies, careful data interpretation is necessary and future research of higher quality is strongly recommended. REGISTRATION: PROSPERO (CRD42020176618). FUNDING: No grants or any other support funding were received.

Median Lingual Foramen, a new midmandibular cephalometric landmark.

PURPOSE: In asymmetrical mandibles, it is often challenging to identify the mandibular midline. The median lingual foramen (MLF) is located at the midline of the anterior mandible. The purpose of this study is to evaluate the reproducibility of identifying the MLF compared to conventional landmarks on cone beam computed tomography's (CBCT's) to mark the mandibular midline. MATERIAL AND METHODS: Ten symmetrical class II, 10 symmetrical class III, ten asymmetrical class II and 10 asymmetrical class III patients were included. On CBCTs, the cephalometric landmarks menton, pogonion, genial tubercle and MLF were identified twice by two observers. RESULTS: A high intra- and interobserver reproducibility was found for all landmarks, the highest being the MLF. The gain in accuracy is 0.998 mm, 0.824 mm and 0.361 mm compared to pogonion, genial tubercle and menton, respectively (P-value <.05). CONCLUSION: MLF is a reliable and reproducible landmark to indicate the midline of the mandible, particularly in Class II asymmetric mandibles.

Morpho-Functional Septorhinoplasty in Adult Patients With Unilateral Cleft Lip Nasal Deformity: A Comprehensive Approach.

PURPOSE: The aim of this study was to introduce a morpho-functional technique of rhinoplasty for correction of defective nasal morphology of the secondary unilateral cleft lip and improvement of air passage through the nose. MATERIALS AND METHODS: The described comprehensive approach follows the rule of 5 R's: relieve, resect, reposition, restructure, and restrengthen. The extended septal graft serves as a columellar strut on the one hand and as a spreader graft on the other hand. RESULTS: The described morpho-functional septorhinoplasty technique is effective for correction of the unilateral cleft lip nasal deformity because it improves the symmetry of the nose, improves the morphology of the alar cartilage, and increases the nasal tip projection. An improvement in breathing occurs as a result of restored symmetry of the ala and nasal vestibule. CONCLUSIONS: Morpho-functional septorhinoplasty is a practical tool to handle adult patients with secondary cleft nasal deformities.

Landmark-Based Versus Voxel-Based 3-Dimensional Quantitative Analysis of Bimaxillary Osteotomies: A Comparative Study.

PURPOSE: We compared the accuracy of landmark-based and voxel-based 3-dimensional (3D) analysis to quantify the osseous movements of the maxilla and mandible after bimaxillary osteotomy. MATERIALS AND METHODS: Cone beam computed tomography (CBCT) scans of 15 patients who had undergone bimaxillary osteotomy were randomly selected from the database. Before surgery, CBCT scanning was performed and an individualized 3D virtual surgical plan made for all patients. During surgery, the mandibular and maxillary segments were positioned as planned using 3D-milled interocclusal splints. At 1 week after surgery, a postoperative CBCT scan was acquired. All pre- and postoperative CBCT data were rendered in 3 dimensions. The 3D virtual head models were superimposed on the cranial base. The 3D surgical movements of the maxilla and mandible were quantified using conventional landmark-based 3D cephalometric analyses and voxel-based 3D analyses (OrthoGnathicAnalyser). This process was performed by the same observer 3 times. The intraclass correlations and Bland-Altman plots were computed to quantify the measurement errors and reproducibility of both methods. RESULTS: High intraclass correlation coefficients were found for both methods. The voxel-based analyses yielded a higher correlation concerning the maxilla and distal mandible (r = 0.98) compared with the landmark-based cephalometric analyses (r = 0.90). CONCLUSIONS: The use of voxel-based 3D analyses in the quantification of osseous movements was more reliable and reproducible than the use of conventional landmark-based 3D analyses.

Influence of involuntary facial expressions on reproducibility of 3D stereophotogrammetry in children with and without complete unilateral cleft lip and palate from 3 to 18 months of age.

OBJECTIVES: To assess the influence of involuntary facial expressions on 3D facial stereophotogrammetry reproducibility in children with and without unilateral cleft lip, alveolus and palate (UCLP) aged 3-18 months. MATERIALS AND METHODS: Three to eight 3D facial images per time point were acquired within 10 min of 31 children with UCLP and 50 controls at 3, 12 and 18 months of age. 3D mapping of two 3D facial images per subject per age was performed. Distance kits of the full face and nasolabial area were calculated. RESULTS: In the total subject pool, mean variation between two 3D facial images ranged from 0.38-0.88 mm. There were no significant differences within groups for the various ages. Variation between controls and UCLP subjects did not differ significantly. Variation was higher in the nasolabial area than in the full face. CONCLUSIONS: The influence of involuntary facial expressions on the estimation of facial growth should not be underestimated, especially in the nasolabial region of UCLP subjects aged 3 months. To improve 3D facial imaging reliability, image capturing should be performed by a trained photographer following a meticulous image capturing protocol, including thorough review after capture. CLINICAL RELEVANCE: Facial 3D stereophotogrammetry is a useful tool for monitoring facial growth longitudinally in young children with facial deformities, as no radiation is involved and image capture is easy and fast. It can be performed reliably in children with and without UCLP aged 3-18 months by an experienced photographer utilising a meticulous image capturing protocol.

Validation of 3D documentation of palatal soft tissue shape, color, and irregularity with intraoral scanning.

OBJECTIVES: The purpose of this study was to assess the feasibility of 3D intraoral scanning for documentation of palatal soft tissue by evaluating the accuracy of shape, color, and curvature. MATERIALS AND METHODS: Intraoral scans of ten participants' upper dentition and palate were acquired with the TRIOS® 3D intraoral scanner by two observers. Conventional impressions were taken and digitized as a gold standard. The resulting surface models were aligned using an Iterative Closest Point approach. The absolute distance measurements between the intraoral models and the digitized impression were used to quantify the trueness and precision of intraoral scanning. The mean color of the palatal soft tissue was extracted in HSV (hue, saturation, value) format to establish the color precision. Finally, the mean curvature of the surface models was calculated and used for surface irregularity. RESULTS: Mean average distance error between the conventional impression models and the intraoral models was 0.02 ± 0.07 mm (p = 0.30). Mean interobserver color difference was - 0.08 ± 1.49° (p = 0.864), 0.28 ± 0.78% (p = 0.286), and 0.30 ± 1.14% (p = 0.426) for respectively hue, saturation, and value. The interobserver differences for overall and maximum surface irregularity were 0.01 ± 0.03 and 0.00 ± 0.05 mm. CONCLUSIONS: This study supports the hypothesis that the intraoral scan can perform a 3D documentation of palatal soft tissue in terms of shape, color, and curvature. CLINICAL RELEVANCE: An intraoral scanner can be an objective tool, adjunctive to the clinical examination of the palatal tissue.

Placement of an antibiotic oral pack on the hard palate after primary cleft palatoplasty: a randomized controlled trial into the effect on fistula rates.

OBJECTIVE: The objective of this study is to determine whether placement of an antibiotic oral pack on the hard palate reduces fistula rates after primary cleft palatoplasty. SUBJECTS AND METHODS: This study was a parallel blocked randomized controlled trial. The study consisted of two groups of 100 patients each with non-syndromic unilateral complete cleft lip, alveolus, and hard and soft palate that underwent primary palatoplasty. Group A had an oral pack placed on the hard palate for 5 days postoperatively while group B did not. Occurrence of fistulae between both groups was tested using odds ratios (OR). RESULTS: In 2% of the patients in group A, a fistula was found 6 months after palatal surgery. In contrast, in 21% of the patients in group B, a palatal fistula could be confirmed. The fistula occurrence in group A was statistically significantly lower than that in group B (OR = 0.0768, CI = [0.02 … 0.34], p < 0.001). CONCLUSION: The findings of this study provide evidence that the rate of fistula formation after primary palatoplasty is significantly reduced if a pack soaked with antibiotic cream is placed on the palate postoperatively for 5 days. CLINICAL RELEVANCE: The use of an antibiotic pack after cleft palate repair can be recommended to prevent occurrence of oronasal fistulae.

Integration of digital dental casts in cone beam computed tomography scans-a clinical validation study.

OBJECTIVES: Images derived from cone beam computed tomography (CBCT) scans lack detailed information on the dentition and interocclusal relationships needed for proper surgical planning and production of surgical splints. To get a proper representation of the dentition, integration of a digital dental model into the CBCT scan is necessary. The aim of this study was to validate a simplified protocol to integrate digital dental models into CBCT scans using only one scan. MATERIALS AND METHODS: Conventional protocol A used one combined upper and lower impression and two CBCT scans. The new protocol B included placement of ten markers on the gingiva, one CBCT scan, and two separate impressions of the upper and lower dentition. Twenty consecutive patients, scheduled for mandibular advancement surgery, were included. To validate protocol B, 3-dimensional reconstructions were made, which were compared by calculating the mean intersurface distances obtained with both protocols. RESULTS: The mean distance for all patients for the upper jaw is 0.39 mm and for the lower jaw is 0.30 mm. For ten out of 20 patients, all distances were less than 1 mm. For the other ten patients, all distances were less than 2 mm. CONCLUSIONS: Mean distances of 0.39 and 0.30 mm are clinically acceptable and comparable to other studies; therefore, this new protocol is clinically accurate. CLINICAL RELEVANCE: This new protocol seems to be clinically accurate. It is less time consuming, gives less radiation exposure for the patient, and has a lower risk for positional errors of the impressions compared to other integration protocols.

Novel mutations in LRP6 highlight the role of WNT signaling in tooth agenesis.

PURPOSE: We aimed to identify a novel genetic cause of tooth agenesis (TA) and/or orofacial clefting (OFC) by combining whole-exome sequencing (WES) and targeted resequencing in a large cohort of TA and OFC patients. METHODS: WES was performed in two unrelated patients: one with severe TA and OFC and another with severe TA only. After deleterious mutations were identified in a gene encoding low-density lipoprotein receptor-related protein 6 (LRP6), all its exons were resequenced with molecular inversion probes in 67 patients with TA, 1,072 patients with OFC, and 706 controls. RESULTS: We identified a frameshift (c.4594delG, p.Cys1532fs) and a canonical splice-site mutation (c.3398-2A>C, p.?) in LRP6, respectively, in the patient with TA and OFC and in the patient with severe TA only. The targeted resequencing showed significant enrichment of unique LRP6 variants in TA patients but not in nonsyndromic OFC patients. Of the five variants in patients with TA, two affected the canonical splice site and three were missense variants; all variants segregated with the dominant phenotype, and in one case the missense mutation occurred de novo. CONCLUSION: Mutations in LRP6 cause TA in humans.Genet Med 18 11, 1158-1162.

AGORA, a data- and biobank for birth defects and childhood cancer.

BACKGROUND: Research regarding the etiology of birth defects and childhood cancer is essential to develop preventive measures, but often requires large study populations. Therefore, we established the AGORA data- and biobank in the Netherlands. In this study, we describe its rationale, design, and ongoing data collection. METHODS: Children diagnosed with and/or treated for a structural birth defect or childhood cancer and their parents are invited to participate in the AGORA data- and biobank. Controls are recruited through random sampling from municipal registries. The parents receive questionnaires about demographics, family and pregnancy history, health status, prescribed medication, lifestyle, and occupational exposures before and during the index pregnancy. In addition, blood or saliva is collected from children and parents, while medical records are reviewed for diagnostic information. RESULTS: So far, we have collected data from over 6,860 families (3,747 birth defects, 905 childhood cancers, and 2,208 controls). The types of birth defects vary widely and comprise malformations of the digestive, respiratory, and urogenital tracts as well as facial, cardiovascular, kidney, skeletal, and central nervous system anomalies. The most frequently occurring childhood cancer types are acute lymphatic leukemia, Hodgkin and non-Hodgkin lymphoma, Wilms' tumor, and brain and spinal cord tumors. Our genetic and/or epidemiologic studies have been focused on hypospadias, anorectal malformations, congenital anomalies of the kidney and urinary tract (CAKUT), and orofacial clefts. CONCLUSION: The large AGORA data- and biobank offers great opportunities for investigating genetic and nongenetic risk factors for disorders in children and is open to collaborative initiatives. Birth Defects Research (Part A) 106:675-684, 2016. © 2016 Wiley Periodicals, Inc.