Post-Penetrating Keratoplasty Assessment of Endothelial Function With a Scleral Lens Challenge.

ABSTRACT: Patients who have undergone penetrating keratoplasty may have corneal edema because of endothelial cell dysfunction. Scleral lens wear may exacerbate edema, particularly if lens fit is suboptimal. Distinguishing between edema because of inherent endothelial cell dysfunction and swelling because of scleral lens-related hypoxia can be challenging. It is necessary, however, to identify the most likely cause of increased corneal thickness to determine whether the patient simply needs refitting for a different lens design or needs additional surgical intervention. This case report describes the utility of corneal tomographic imaging before and after scleral lens wear both to estimate endothelial cell function and to direct decisions when designing a scleral lens for a post-transplant eye.

Manual small incision cataract surgery.

PURPOSE OF REVIEW: To review various techniques of manual small incision cataract surgery (MSICS), updates on training residents and fellows, and cost-effectiveness of the surgery. RECENT FINDINGS: Recent population studies estimate that there are 53 million people blind worldwide from cataracts, up from previous figures. This is in part because of population growth and increased life expectancy worldwide. MSICS continues to play a significant role in addressing cataract burden and there is an increasing need to train surgeons in the technique. In response to this need, several modules and rubrics have been developed to assist in the training process. SUMMARY: MSICS has been refined over recent decades with overall outcomes comparable to phacoemulsification (phaco) in certain settings. MSICS cost and efficiency advantages support its ongoing essential role in addressing global cataract blindness.

An unusual case of idiopathic calcinosis of the eyelid.

Idiopathic subepidermal calcinosis, also known as idiopathic calcinosis cutis, is a rare condition, which typically presents as a small, hard, subepithelial mass in the absence of systemic disease and trauma. We report on an atypical case of idiopathic calcinosis, which appeared in an otherwise healthy 61-year-old female along the tarsus of her right upper eyelid. The purpose of this case report is to demonstrate idiopathic calcinosis in an unusual location that is deep to the dermis and to discuss the vast differential diagnosis of this entity.

Subepidermal Calcinosis in the Ocular Adnexa: A Systematic Review.

PURPOSE: To review the clinical and histopathologic findings associated with subepidermal calcinosis of the eyelids. METHODS: A systematic review of the literature on subepidermal calcinosis of the eyelids was performed. Cases included were idiopathic in nature and met the histologic criteria for subepidermal calcinosis with calcium deposits in the dermis of the skin. RESULTS: Twenty-one publications presenting 53 cases of subepidermal calcinosis involving the eyelids were published between 1970 and 2016. Males were affected more than females (67% vs. 33%), and 89% of patients were 21 years of age or younger. A total of 63% were non-Caucasian. Most cases involved a single lesion (82%), and lesions were most frequently located on the upper eyelid (63%). In 81% of cases, the lesion was less than 5 mm in diameter. When reported, the treatment of choice was complete surgical excision. CONCLUSIONS: Subepidermal calcinosis should be considered in the differential diagnosis of idiopathic lesions on the eyelid, particularly in young males with no history of systemic disease or laboratory abnormalities. These nodules usually present as painless, small, firm, mobile solitary cutaneous lesions with a predilection for the upper eyelid. Diagnosis is confirmed by histopathology, and treatment is with surgical excision.

Pharmacokinetics and efficacy of Bioerodible Dexamethasone implant in Concanavalin A-induced uveitic cataract rabbit model.

PURPOSE: To advance therapy for the treatment of concurrent uveitis and post-cataract surgical inflammation; we evaluated pharmacokinetics and pharmacodynamics of Bioerodible Dexamethasone Implant (BDI) containing 0.3 mg of dexamethasone (DXM) in Concanavalin A (Con A) induced uveitis followed by phacoemulsification in New Zealand White (NZW) rabbits. METHODS: The BDI was implanted in the inferior fornix of the capsular bag after intravitreal injection of Con A and ensuing phacoemulsification in NZW rabbits; standard-of-care topical 0.1% dexamethasone drops served as control. DXM was quantified by liquid chromatography-tandem mass spectrometry and pharmacokinetics of DXM in disease vs. healthy eyes was compared. All eyes were assessed clinically using slit lamp biomicroscopy and Draize scoring scale. Retinal thickness and histological analyses were performed to evaluate retinal edema, inflammation and implant biocompatibility respectively. RESULTS: In Con A-induced inflammatory uveitic cataract model the BDI controlled anterior and posterior segment inflammation as well as retinal thickening more effectively than topical drops. The exposure (AUC0-t) of DXM with BDI is superior in all ocular tissues, while topical drops did not achieve therapeutic posterior segment levels and did not control inflammation nor prevent retinal edema and architectural disruption. CONCLUSIONS: Our results demonstrate the superiority of the BDI in suppressing Con A-induced inflammation and retinal edema in NZW rabbits and highlight the need for sustained bidirectional delivery of potent anti-inflammatory agents for 5 to 6 weeks to optimize clinical outcomes.

Suture Fixation to Reduce Graft Detachment in Descemet Stripping Endothelial Keratoplasty.

PURPOSE: The aim of this study was to report the outcomes of graft fixation using interrupted, full-thickness sutures on graft detachment after Descemet stripping endothelial keratoplasty (DSEK). METHODS: All DSEK procedures performed at Mayo Clinic, Rochester, MN, from 2015 through 2022 were retrospectively reviewed. Risk factors for graft detachment were defined as previous incisional glaucoma surgery, previous penetrating keratoplasty, or absence of the normal lens-capsule barrier. Cases were categorized into sutured, high-risk grafts; unsutured, high-risk grafts; and unsutured, low-risk grafts. The primary outcome was graft detachment, and secondary outcomes were early graft failure and graft clarity at 12 months after surgery. RESULTS: Demographics between the high-risk groups were similar for sex and age at the time of surgery. Graft detachment occurred in 4 of 97 sutured, high-risk eyes (4.1%) and 24 of 119 unsutured high-risk eyes (20.2%) ( P = 0.002). In comparison, graft detachment occurred in 18 of 181 unsutured low-risk eyes (9.9%). The incidence of early graft failure was 2.1%, 5.0%, and 3.3% and late graft failure by 12 months was 9.8%, 12.8%, and 4.2%, respectively. CONCLUSIONS: In eyes with high-risk factors for graft detachment, suture fixation of the graft in DSEK decreased graft detachment to a rate at least as low as that in low-risk eyes.

The effect of patient age on some new and older IOL power calculation formulas.

PURPOSE: To assess the accuracy of intraocular lens (IOL) power calculation in different age groups using various IOL calculation formulas. METHODS: Data from 421 eyes of 421 patients ≥60 years old (ages: 60-69, n = 131; 70-74, n = 105; 75-84, n = 158 and ≥85, n = 27), who underwent uneventful cataract surgery with SN60WF IOL implantation at John A. Moran Eye Center, Salt Lake City, USA, were retrospectively obtained. The SD of the prediction error (PE), median and mean absolute PEs and the percentage of eyes within ±0.25, ±0.50, ±0.75 and ±1.00 D were calculated after constant optimizations for the following formulas: Barrett Universal II (BUII), Emmetropia Verifying Optical (EVO) 2.0, Haigis, Hoffer Q, Hoffer QST, Holladay 1, Kane, Radial Basis Function (RBF) 3.0 and SRK/T. Results were compared between the different age groups. RESULTS: Predictability rates within 0.25D were lower for the eldest age group compared with the other groups using the EVO 2.0 (33% vs. 37%-53%, p = 0.045), Kane (26% vs. 35%-50%, p = 0.034) and SRK/T (22% vs. 31%-49%, p = 0.002). Higher median absolute refractive errors for all formulas were observed in the oldest group [range: 0.39 D (Haigis, Hoffer QSR)-0.48 D (Kane)], followed by the youngest group [range: 0.30 D (RBF 3.0)-0.39 D (Holladay 1, SRK/T)] but did not reach statistical significance. No significant differences between the groups in the distribution parameter were seen. CONCLUSION: Current IOL power calculation formulas may have variable accuracy for different age groups. This should be taken into account when planning cataract surgery to improve refractive outcomes.

Accuracy assessment of artificial intelligence IOL calculation formulae: utilizing the heteroscedastic statistics and the Eyetemis Analysis Tool.

OBJECTIVES: To analyse the accuracy of artificial intelligence (AI)-driven intraocular (IOL) calculation formulae, together with established formulae using the heteroscedastic methodology and the Eyetemis Analysis Tool. METHODS: Data from 404 eyes who underwent uneventful phacoemulsification with implantation of the SN60WF IOL were retrospectively reviewed. IOL power calculations were performed using the Barrett Universal II (BUII), EVO 2.0, Hoffer QST, K6, Ladas Super Formula (LSF), Nallasamy, PEARL-DGS and RBF 3.0 formulae. The SD of the prediction error (PE), served as the primary metric for accuracy. The mean absolute deviation (MAD) and the predictability rates within intervals from ±0.25 D to ±1.50 D were also evaluated. The Eyetemis Analysis Tool was used for further validation. RESULTS: The SD ranged from 0.468 (Nallasamy) to 0.510 (LSF). The Nallasamy formula had a significantly lower SD than the BUII (0.505, p = 0.025) and K6 (0.489, p = 0.022) formulae. The Nallasamy formula also exhibited the lowest MAD (0.358) with a significant difference compared with the Hoffer QST formula (0.384, p < 0.001). Finally, a significantly higher percentage of eyes achieving ± 0.50 D of the target refraction was seen using the Nallasamy formula (77.19%) compared with the Hoffer QST (71.04%, p = 0.019) and Ladas Super Formula (70.79%, p = 0.030) formulae. CONCLUSIONS: The Nallasamy formula, incorporating AI technology, demonstrated superior accuracy according to the analysis guidelines for PE statistics for non-gaussian datasets recommended by Holladay et al. and the online Eyetemis Analysis Tool.

Appropriateness of Ophthalmology Recommendations From an Online Chat-Based Artificial Intelligence Model.

Objective: To determine the appropriateness of ophthalmology recommendations from an online chat-based artificial intelligence model to ophthalmology questions. Patients and Methods: Cross-sectional qualitative study from April 1, 2023, to April 30, 2023. A total of 192 questions were generated spanning all ophthalmic subspecialties. Each question was posed to a large language model (LLM) 3 times. The responses were graded by appropriate subspecialists as appropriate, inappropriate, or unreliable in 2 grading contexts. The first grading context was if the information was presented on a patient information site. The second was an LLM-generated draft response to patient queries sent by the electronic medical record (EMR). Appropriate was defined as accurate and specific enough to serve as a surrogate for physician-approved information. Main outcome measure was percentage of appropriate responses per subspecialty. Results: For patient information site-related questions, the LLM provided an overall average of 79% appropriate responses. Variable rates of average appropriateness were observed across ophthalmic subspecialties for patient information site information ranging from 56% to 100%: cataract or refractive (92%), cornea (56%), glaucoma (72%), neuro-ophthalmology (67%), oculoplastic or orbital surgery (80%), ocular oncology (100%), pediatrics (89%), vitreoretinal diseases (86%), and uveitis (65%). For draft responses to patient questions via EMR, the LLM provided an overall average of 74% appropriate responses and varied by subspecialty: cataract or refractive (85%), cornea (54%), glaucoma (77%), neuro-ophthalmology (63%), oculoplastic or orbital surgery (62%), ocular oncology (90%), pediatrics (94%), vitreoretinal diseases (88%), and uveitis (55%). Stratifying grades across health information categories (disease and condition, risk and prevention, surgery-related, and treatment and management) showed notable but insignificant variations, with disease and condition often rated highest (72% and 69%) for appropriateness and surgery-related (55% and 51%) lowest, in both contexts. Conclusion: This LLM reported mostly appropriate responses across multiple ophthalmology subspecialties in the context of both patient information sites and EMR-related responses to patient questions. Current LLM offerings require optimization and improvement before widespread clinical use.

Geographic Representation of Authorship in Ophthalmic Research from Low- and Middle-Income Countries.

PURPOSE: Low- and middle-income countries (LMICs) are underrepresented in ophthalmic research, despite carrying the highest burden of visual impairment. To assess the representation of local authors in global ophthalmic research, this cross-sectional, bibliometric analysis measured the proportion of LMIC-affiliated authorship in LMIC-based ophthalmic research. METHODS: We sampled original, primary research conducted in LMICs and published in 1 of 7 high-impact ophthalmic journals between 2017 and 2021. For each article, we extracted the number and name of country study site(s), country affiliation(s) of first and last author, proportion of LMIC-affiliated authors, funding sources, and study design. RESULTS: Of the 1,333 studies exclusively conducted in LMICs, 89.4% of first authors and 80.6% of last authors were exclusively LMIC-affiliated. Representation of LMIC-affiliated first authors were lower in studies based in low-income countries (25.0%) or in sub-Saharan Africa (26.5%), published in journals with higher impact factors (68.0% in Ophthalmology), funded by high-income countries (HICs) (41.4%), or conducted in both LMICs and HICs (27.1%). The United States, United Kingdom, and Australia had the 3rd, 6th, and 8th largest shares of last authors. There were only 12 single-country studies conducted in low-income countries, namely Ethiopia, the Gambia, Guinea, Liberia, the Niger, and Sierra Leone. Of these countries, only three held first authorship and one held last authorship. CONCLUSIONS: Although LMIC-based ophthalmic research has demonstrated higher local authorship representation compared to other fields, underrepresentation can be exacerbated by country income level, journal "prestige," and degree of HIC involvement. These discrepancies highlight the need for more equitable data ownership in global ophthalmic research.

Measurement of Phacoemulsification Vacuum Pressure in the Oertli CataRhex3.

Purpose: To determine the actual vacuum pressure generated by the Oertli CataRhex 3® (Oertli), using an external measuring system. Methods: The effective vacuum pressure created by the Oertli was measured with a pressure device that was continuous with the vacuum tubing system while closed to the external environment. Measurements were taken with the machine set to 300 and 500 mmHg at flow rates of 20, 35, and 50 mL/min and at bottle heights of 60, 80, and 100 cm. Pressures were recorded after the foot pedal was depressed to vacuum setting (second position), and the pressure was allowed to stabilize. Subsequently, it was compared to the pressure value displayed by the machine. Results: Externally measured vacuum pressure was on average 13.02% greater (39.05 mmHg) than displayed vacuum pressure at 300 mmHg (P < 0.005) and 8.60% greater (42.98 mmHg) than displayed vacuum at 500 mmHg (P < 0.005). The average difference between displayed and measured pressure increased with increasing bottle heights. Conclusion: On average, the vacuum pressure generated in the Oertli was found to be significantly higher than the machine's reading when the machine was set at 300 mmHg and 500 mmHg. Adjusting vacuum had variable effects on the measured versus displayed pressure readings.

Optimization of Phacoemulsification Tip Gauge on the Oertli CataRhex3 in an in vitro Setting.

Purpose: To evaluate the effect of each of the tip sizes available for the Oertli CataRhex3® phacoemulsification machine on efficiency. Methods: Porcine lenses were fixed in formalin for 2 hours, then cut into 3.0 mm cubes. We studied three Oertli tips, all of which had a 30-degree bevel: easyTip 2.2 mm (20G), easyTip 2.8 mm (19G), and CO-MICS (21G). For the 19G and 20G tips, vacuum was set at 600 mmHg, irrigation rate at 50 mL/min, continuous power 70%, and bottle height 85 cm. For the 21G tip, vacuum was set at 450 mmHg; irrigation and power settings were identical to those used for the easyTip tips. We measured time to removal and chatter events to determine efficiency. Results: Results from 20 trials for each tip showed that the larger the gauge size, the more quickly lens fragments were removed. Chatter events demonstrated an increasing trend with smaller tip gauge. The 19G tip used an average time to fragment removal of 2.8 seconds; the 20G, 3.2 seconds; and the 21G, 4.6 seconds. Increasing tip diameter from 21G to 20G decreased emulsification time by 33% (P = 0.02). Increasing the diameter from 21G to 19G further decreased time to emulsification by 42% (P = 0.003). The 21G tip had a mean 1.4 events/cube; 20G, 0.35 events; and 19G, 0.1 events. Differences in mean chatter events for each tip were each statistically significant. Conclusion: These data suggest that when evaluated by chatter events and emulsification time, the 2.8 mm (19G) easyTip proves to have greatest efficiency.

Optimizing Tip Diameter in Phacoemulsification of Varying Lens Sizes: An in vitro Study.

PURPOSE: We assessed the effect of two lens cube sizes, three tip sizes, and two ultrasound (US) approaches on phacoemulsification efficiency and chatter. METHODS: After porcine lens nuclei were soaked in formalin, we divided them into cubes measuring 2.0 mm or 3.0 mm. We collected efficiency and chatter data for 30-degree bent 19 G, 20 G, and 21 G tips with a continuous torsional US system; and for straight 19 G, 20 G, and 21 G tips with a micropulse longitudinal US system. RESULTS: The average time needed for removal was always higher for the 3.0 mm lens cube than for the 2.0 mm lens cube. Statistically significant differences were observed between the 19 G and 21 G tips with micropulse longitudinal US using a 2.0 mm cube and a 3.0 mm cube, and with continuous transversal US using a 2.0 mm lens cube and a 3.0 mm cube. We did not observe significant differences between 19 G and 20 G tips with either cube size in either US system. However, we noted identical trends for both cube sizes with both US approaches; 19 G tips performed better than 20 G and 21 G tips. CONCLUSION: Regardless of the lens size, 19 G needles were the most efficient, and had both the fewest outliers and the smallest standard deviations.

Effects on phacoemulsification efficiency and chatter at variable longitudinal ultrasound settings when combined with constant torsional energy.

PURPOSE: To evaluate longitudinal power settings for optimally efficient lens fragment removal, using the Centurion machine. SETTING: John A. Moran Eye Center, University of Utah, Salt Lake City, USA. DESIGN: Experimental study. METHODS: Porcine lens nuclei were cut into 2.0 mm cubes. Experiments were conducted at 100% torsional power; vacuum set at 500 mm Hg, aspiration 50 mL/min, and intraocular pressure 110 mm Hg. A 20-degree tip with a 30-degree bevel was used. Longitudinal power was tested between 20% and 100%. Efficiency (time for fragment removal) and chatter (the number of times the fragment bounced from the tip) were measured. RESULTS: A linear increase in efficiency was observed from 20% to 100% longitudinal power (R = 0.9281, slope = -0.0271). An efficiency slope change occurred at 60% power, with the largest incremental change in efficiency between 20% and 60% (R = 0.9756, slope = -0.0394) and a lesser change between 60% and 100% (R = 0.9827, slope = -0.0121). Chatter analysis showed minimal events at 20% to 60%, but a significant increase at >80% (P = .005). This increase appeared to be incremental (R = 0.8929). CONCLUSIONS: Increasing longitudinal power, with all other settings constant, increased efficiency. Greatest efficiency gains were observed between 20% and 60%. At 80% and 100%, chatter events increased significantly. With a goal of recommending optimally efficient settings while minimizing excess energy and chatter, adding 60% of longitudinal power to 100% torsional power was shown to be the best setting to increase efficiency and avoid repulsion in these vacuum and aspiration settings.

High vacuum and aspiration on phacoemulsification efficiency and chatter for Centurion.

OBJECTIVE: To compare relative efficiency and chatter of high aspiration and vacuum settings. DESIGN: In vitro laboratory study. METHODS: The John A. Moran Eye Center Laboratories, University of Utah, Salt Lake City, Utah, was the study setting. Porcine nuclei were fixed in formalin and cut into 2.0 mm cubes. Lens cubes were phacoemulsified with Balanced tips at 50 and 60 mL/min aspiration with 500, 600, and 700 mm Hg vacuum with monitored forced infusion. Experiments were conducted at constant torsional power, longitudinal power, and intraocular pressure. RESULTS: No significant change was observed in average chatter across each tested setting. Increasing aspiration rate did not increase efficiency. Increasing vacuum up to 600 mm Hg from 500 mm Hg did not change efficiency. However, increasing vacuum to 700 mm Hg decreased efficiency (p = 0.008 for 500 mm Hg vs 700 mm Hg and p = 0.05 for 600 mm Hg vs 700 mm Hg). Increasing aspiration and increasing vacuum did not significantly improve chatter. CONCLUSIONS: Increasing aspiration above 50 mL/min did not improve phacoemulsification efficiency. Increasing vacuum settings to 700 mm Hg decreases efficiency. Chatter did not significantly change with increasing aspiration and vacuum settings.

Association between Chronic Obstructive Pulmonary Disease and Exfoliation Syndrome: The Utah Project on Exfoliation Syndrome.

PURPOSE: Exfoliation syndrome (XFS) is associated with genetic variants of lysyl oxidase-like 1 (LOXL1), a key enzyme in the stabilization of extracellular matrix (ECM) and elastin, and in connective tissue repair. Because patients with chronic obstructive pulmonary disease (COPD) have increased and altered elastin degradation, an association between XFS and COPD was hypothesized and analyzed. Impact of XFS on survival in patients with COPD was evaluated. DESIGN: Case-case and case-control comparison with 5:1 age- and sex-matched controls. SUBJECTS: Total of 2943 patients with XFS, 20 589 patients with COPD, and 162 patients with both disorders seen between 1996 and 2015 were identified from Utah Population Database-linked medical records. Controls were selected and matched by sex and birth year to patients in a 5:1 ratio. METHODS: Unconditional logistic regression, using International Classification of Diseases, Ninth Revision codes (365.52 and 366.11) to define XFS and an outcome of COPD (496.0), was used to calculate the odds ratio (OR) to estimate risk of COPD in patients with XFS, adjusting for age and sex. Model covariates included race, obesity, and tobacco use. MAIN OUTCOME MEASURES: Whether XFS patients have an increased risk of developing COPD; whether COPD patients have an increased risk of XFS; and, in COPD patients, whether survival differs between those with XFS and those without. RESULTS: In XFS patients, risk of a COPD diagnosis was increased compared with that of non-XFS controls (OR = 1.41; 95% confidence interval [CI], 1.17-1.70; P < 0.0004), particularly in a tobacco users subset (OR = 2.17; 95% CI, 1.15-4.09; P = 0.02). COPD patients and controls with no COPD did not differ in their risk of an XFS diagnosis. COPD patients with XFS had significantly better survival than patients with COPD and no XFS history. CONCLUSIONS: XFS patients may have an increased risk of a COPD diagnosis compared with non-XFS individuals. In COPD patients, risk of XFS was not increased compared with those with no COPD history. In COPD patients with XFS, survival is significantly improved compared with COPD patients with no XFS history.

Impact of torsional micropulse on phacoemulsification efficiency and chatter.

OBJECTIVE: Evaluate the effect of increasing ultrasound (US) power on chatter events and efficiency under both continuous and micropulse torsional US to reduce total cataract extraction times. DESIGN: In vitro laboratory study. METHODS: Porcine lens nuclei were incubated in formalin for 2 hours and then cut into 2-mm cubes. Phacoemulsification was performed using the Centurion Vision System and Infiniti OZil handpiece with the balanced tip. Both US modalities were studied at 60%, 80%, and 100% power. Micropulse rate was 83 pulses per second with 50% on time. Each combination comprised 20 runs. Efficiency was considered as the total time for a cube to be emulsified; chatter was the number of times the lens fragment bounced off the tip. RESULTS: There was significant decrease in efficiency when power was increased from 60% to 100% (1.33-1.97 s; p < 0.001) under micropulse US and significant increase in chatter when power was further increased to 100% from 60% (0.15-0.94 s; p < 0.001). There was no significant efficiency change with increased power under continuous US. Comparing the phacoemulsification efficiency between continuous and micropulse US, we found no significant difference at 60% and 80% power; at 100% power, continuous was significantly more efficient than micropulse (1.48 and 1.97 s, respectively; p = 0.001). CONCLUSIONS: Increasing power above 60% decreased efficiency under torsional micropulse US. We believe that this was due to the chatter increase observed with increasing US power. Torsional continuous US was significantly more efficient than micropulse US at 100% power.

Phacoemulsification in review: Optimization of cataract removal in an in vitro setting.

Phacoemulsification, initially used in the late 1960s, continues to be the standard of care for cataract removal. An animal model was developed so that, in a controlled research setting, all the various machines, handpieces, tips, and settings could be investigated. As a general rule, the higher power, vacuum, and aspiration settings lead to optimally efficient phacoemulsification. In addition, both new phacoemulsification platforms and newly developed devices have been shown to improve efficiency. As a result, we recommend that the integration of these recent developments should be considered in future investigations.

Determining optimal ultrasound percent on time with long-pulse torsional phacoemulsification.

OBJECTIVE: To evaluate the optimum percent on time for the most efficient lens fragment removal using long-pulse torsional ultrasound (US). DESIGN: In vitro laboratory study. METHODS: Porcine lens nuclei were incubated in formalin for 2 hours and then cut into 2 mm cubes. Phacoemulsification was performed using the Centurion® Vision System and Infiniti OZil handpiece with the balanced tip. Vacuum was set at 500 mm Hg, aspiration rate at 50 mL/min, and intraocular pressure (IOP) at 50 mm Hg. Pulse rate was 26 pulses/second. Studied parameters were percent power: 60%, 80%, and 100%, and percent on times: 50%, 60%, 70%, and 80%. Efficiency was the total time for a cube to be emulsified. Chatter was the number of times the lens fragment bounced off the tip. RESULTS: There was no significant difference in efficiency between 50%, 60%, and 70 % on-time settings (p = 0.17 and 0.08, respectively); however, there was significant increase in efficiency when the on time was increased from 70% to 80% (p = 0.03). Increasing power from 60% to 100% showed a statistically significant efficiency increase (p = 0.001). There was no significant change in chatter with increasing on time; however, there was a statistically significant increase in chatter with every power level increase. CONCLUSION: Increasing on-time percent does not improve efficiency under torsional long-pulse US. There is no significant change in chatter with increasing on-time percent. Increasing power increases efficiency despite chatter increase. Long-pulse US does not appear to influence torsional action in a clinically meaningful way.

The effect of increasing power when grooving using phacoemulsification.

PURPOSE: To determine optimal power settings on the Centurion Vision System during the grooving step in cataract surgery. METHODS: Intact porcine lenses hardened by formalin and placed in a chamber designed to simulate the anterior chamber of the eye were used to test longitudinal power at 40%, 70%, and 100% and torsional power at 0%. Flow rate was set at 40 mL/min. Vacuum was set at 400 mmHg, intraocular pressure was set at 50 mmHg, and a balanced phacoemulsification tip with a 20 degree tip and a 30 degree bevel was used. Efficiency (time to groove the lens in half) was determined. RESULTS: Increasing longitudinal power from 40% to 70% increased efficiency by 28% (P<0.05), and by 32% (P<0.05) when increasing longitudinal power from 40% to 100%. There was no statistically significant increase in efficiency from 70% to 100%. CONCLUSION: For the tested variables, a longitudinal power of 70% was determined to be most efficient during the grooving step of cataract surgery for equivalent 3-4+ nuclei. Further increases in power demonstrated no statistically significant improvement in efficiency.