Genome sequencing of Porostereum spadiceum to study the degradation of levofloxacin.

Despite various plans to rationalize antibiotic use, antibiotic resistance in environmental bacteria is increasing due to the accumulation of antibiotic residues in the environment. This study aimed to test the ability of basidiomycete fungal strains to biotransform the antibiotic levofloxacin, a widely-used third-generation broad-spectrum fluoroquinolone, and to propose enzyme targets potentially involved in this biotransformation. The biotransformation process was performed using fungal strains. Levofloxacin biotransformation reached 100% after 9 days of culture with Porostereum spadiceum BS34. Using genomics and proteomics analyses coupled with activity tests, we showed that P. spadiceum produces several heme-peroxidases together with H2O2-producing enzymes that could be involved in the antibiotic biotransformation process. Using UV and high-resolution mass spectrometry, we were able to detect five levofloxacin degradation products. Their putative identity based on their MS2 fragmentation patterns led to the conclusion that the piperazine moiety was the main target of oxidative modification of levofloxacin by P. spadiceum, leading to a decrease in antibiotic activity.

Modification of a Marine Pine Kraft Lignin Sample by Enzymatic Treatment with a Pycnoporus cinnabarinus Laccase.

Here, we report work on developing an enzymatic process to improve the functionalities of industrial lignin. A kraft lignin sample prepared from marine pine was treated with the high-redox-potential laccase from the basidiomycete fungus Pycnoporus cinnabarinus at three different concentrations and pH conditions, and with and without the chemical mediator 1-hydroxybenzotriazole (HBT). Laccase activity was tested in the presence and absence of kraft lignin. The optimum pH of PciLac was initially 4.0 in the presence and absence of lignin, but at incubation times over 6 h, higher activities were found at pH 4.5 in the presence of lignin. Structural changes in lignin were investigated by Fourier-transform infrared spectroscopy (FTIR) with differential scanning calorimetry (DSC), and solvent-extractable fractions were analyzed using high-performance size-exclusion chromatography (HPSEC) and gas chromatography-mass spectrometry (GC-MS). The FTIR spectral data were analyzed with two successive multivariate series using principal component analysis (PCA) and ANOVA statistical analysis to identify the best conditions for the largest range of chemical modifications. DSC combined with modulated DSC (MDSC) revealed that the greatest effect on glass transition temperature (Tg) was obtained at 130 U g cm-1 and pH 4.5, with the laccase alone or combined with HBT. HPSEC data suggested that the laccase treatments led to concomitant phenomena of oligomerization and depolymerization, and GC-MS revealed that the reactivity of the extractable phenolic monomers depended on the conditions tested. This study demonstrates that P. cinnabarinus laccase can be used to modify marine pine kraft lignin, and that the set of analytical methods implemented here provides a valuable tool for screening enzymatic treatment conditions.

Screening of five marine-derived fungal strains for their potential to produce oxidases with laccase activities suitable for biotechnological applications.

BACKGROUND: Environmental pollution is one of the major problems that the world is facing today. Several approaches have been taken, from physical and chemical methods to biotechnological strategies (e.g. the use of oxidoreductases). Oxidative enzymes from microorganisms offer eco-friendly, cost-effective processes amenable to biotechnological applications, such as in industrial dye decolorization. The aim of this study was to screen marine-derived fungal strains isolated from three coastal areas in Tunisia to identify laccase-like activities, and to produce and characterize active cell-free supernatants of interest for dye decolorization. RESULTS: Following the screening of 20 fungal strains isolated from the harbors of Sfax and Monastir (Tunisia), five strains were identified that displayed laccase-like activities. Molecular-based taxonomic approaches identified these strains as belonging to the species Trichoderma asperellum, Stemphylium lucomagnoense and Aspergillus nidulans. Among these five isolates, one T. asperellum strain (T. asperellum 1) gave the highest level of secreted oxidative activities, and so was chosen for further studies. Optimization of the growth medium for liquid cultures was first undertaken to improve the level of laccase-like activity in culture supernatants. Finally, the culture supernatant of T. asperellum 1 decolorized different synthetic dyes belonging to diverse dye families, in the presence or absence of 1-hydroxybenzotriazole (HBT) as a mediator. CONCLUSIONS: The optimal growth conditions to produce laccase-like active cell-free supernatants from T. asperellum 1 were 1.8 mM CuSO4 as an inducer, 1% NaCl to mimic a seawater environment and 3% sucrose as a carbon source. The culture supernatant of T. asperellum 1 effectively decolorized different synthetic dyes belonging to diverse chemical classes, and the presence of HBT as a mediator improved the decolorization process.

Characterization of the CAZy Repertoire from the Marine-Derived Fungus Stemphylium lucomagnoense in Relation to Saline Conditions.

Even if the ocean represents a large part of Earth's surface, only a few studies describe marine-derived fungi compared to their terrestrial homologues. In this ecosystem, marine-derived fungi have had to adapt to the salinity and to the plant biomass composition. This articles studies the growth of five marine isolates and the tuning of lignocellulolytic activities under different conditions, including the salinity. A de novo transcriptome sequencing and assembly were used in combination with a proteomic approach to characterize the Carbohydrate Active Enzymes (CAZy) repertoire of one of these strains. Following these approaches, Stemphylium lucomagnoense was selected for its adapted growth on xylan in saline conditions, its high xylanase activity, and its improved laccase activities in seagrass-containing cultures with salt. De novo transcriptome sequencing and assembly indicated the presence of 51 putative lignocellulolytic enzymes. Its secretome composition was studied in detail when the fungus was grown on either a terrestrial or a marine substrate, under saline and non-saline conditions. Proteomic analysis of the four S. lucomagnoense secretomes revealed a minimal suite of extracellular enzymes for plant biomass degradation and highlighted potential enzyme targets to be further studied for their adaptation to salts and for potential biotechnological applications.

Enzyme Properties of a Laccase Obtained from the Transcriptome of the Marine-Derived Fungus Stemphylium lucomagnoense.

Only a few studies have examined how marine-derived fungi and their enzymes adapt to salinity and plant biomass degradation. This work concerns the production and characterisation of an oxidative enzyme identified from the transcriptome of marine-derived fungus Stemphylium lucomagnoense. The laccase-encoding gene SlLac2 from S. lucomagnoense was cloned for heterologous expression in Aspergillus niger D15#26 for protein production in the extracellular medium of around 30 mg L-1. The extracellular recombinant enzyme SlLac2 was successfully produced and purified in three steps protocol: ultrafiltration, anion-exchange chromatography, and size exclusion chromatography, with a final recovery yield of 24%. SlLac2 was characterised by physicochemical properties, kinetic parameters, and ability to oxidise diverse phenolic substrates. We also studied its activity in the presence and absence of sea salt. The molecular mass of SlLac2 was about 75 kDa, consistent with that of most ascomycete fungal laccases. With syringaldazine as substrate, SlLac2 showed an optimal activity at pH 6 and retained nearly 100% of its activity when incubated at 50°C for 180 min. SlLac2 exhibited more than 50% of its activity with 5% wt/vol of sea salt.

Biological contamination and its chemical control in microalgal mass cultures.

Microalgae are versatile sources of bioproducts, a solution for many environmental problems. However, and despite its importance, one of the main problems in large-scale cultures-the presence of contaminants-is rarely systematically approached. Contamination, or the presence of undesirable organisms in a culture, is deleterious for the culture and frequently leads to culture crashes. To avoid contamination, closed systems can be used; however, for very large-scale open systems, contamination is unavoidable and remediation procedures are necessary-ranging from physicochemical treatment to addition of biocidal substances. In all cases, early detection and culture monitoring are paramount. This article describes the biological contaminants, contamination mechanisms, and control systems used in open and closed cultures, discussing the latest advances and techniques in the area. It also discusses the complex interactions of algae with other microorganisms that can be expected in cultivation systems.

Current advances in gibberellic acid (GA3) production, patented technologies and potential applications.

MAIN CONCLUSION: Gibberellic acid is a plant growth hormone that promotes cell expansion and division. Studies have aimed at optimizing and reducing production costs, which could make its application economically viable for different cultivars. Gibberellins consist of a large family of plant growth hormones discovered in the 1930s, which are synthesized via the terpenes route from the geranylgeranyl diphosphate and feature a basic structure formed by an ent-gibberellane tetracyclic skeleton. Among them, only four have biological activity, including gibberellic acid (GA3), which acts as a natural plant growth regulator, especially for stem elongation, seed germination, and increased fruit size. It can be obtained from plants, fungi, and bacteria. There are also some reports about microalgae GA3 producers. Fungi, especially Gibberella fujikuroi, are preferred for GA3 production via submerged fermentation or solid-state fermentation. Many factors may affect its production, some of which are related to the control and scale-up of fermentation parameters. Different GA3 products are available on the market. They can be found in liquid or solid formulations containing only GA3 or a mixture of other biological active gibberellins, which can be applied on a wide variety of cultivars, including crops and fruits. However, the product's cost still limits its large and continuous application. New low-cost and efficient GA3 production alternatives are surely welcome. This review deals with the latest scientific and technological advances on production, recovery, formulation, and applications of this important plant growth hormone.

Optimization of the Decolorization of the Reactive Black 5 by a Laccase-like Active Cell-Free Supernatant from Coriolopsis gallica.

The textile industry generates huge volumes of colored wastewater that require multiple treatments to remove persistent toxic and carcinogenic dyes. Here we studied the decolorization of a recalcitrant azo dye, Reactive Black 5, using laccase-like active cell-free supernatant from Coriolopsis gallica. Decolorization was optimized in a 1 mL reaction mixture using the response surface methodology (RSM) to test the influence of five variables, i.e., laccase-like activity, dye concentration, redox mediator (HBT) concentration, pH, and temperature, on dye decolorization. Statistical tests were used to determine regression coefficients and the quality of the models used, as well as significant factors and/or factor interactions. Maximum decolorization was achieved at 120 min (82 ± 0.6%) with the optimized protocol, i.e., laccase-like activity at 0.5 U mL−1, dye at 25 mg L−1, HBT at 4.5 mM, pH at 4.2 and temperature at 55 °C. The model proved significant (ANOVA test with p < 0.001): coefficient of determination (R²) was 89.78%, adjusted coefficient of determination (R²A) was 87.85%, and root mean square error (RMSE) was 10.48%. The reaction conditions yielding maximum decolorization were tested in a larger volume of 500 mL reaction mixture. Under these conditions, the decolorization rate reached 77.6 ± 0.4%, which was in good agreement with the value found on the 1 mL scale. RB5 decolorization was further evaluated using the UV-visible spectra of the treated and untreated dyes.

Biotransformation of the Fluoroquinolone, Levofloxacin, by the White-Rot Fungus Coriolopsis gallica.

The wastewater from hospitals, pharmaceutical industries and more generally human and animal dejections leads to environmental releases of antibiotics that cause severe problems for all living organisms. The aim of this study was to investigate the capacity of three fungal strains to biotransform the fluoroquinolone levofloxacin. The degradation processes were analyzed in solid and liquid media. Among the three fungal strains tested, Coriolopsis gallica strain CLBE55 (BRFM 3473) showed the highest removal efficiency, with a 15% decrease in antibiogram zone of inhibition for Escherichia coli cultured in solid medium and 25% degradation of the antibiotic in liquid medium based on high-performance liquid chromatography (HPLC). Proteomic analysis suggested that laccases and dye-decolorizing peroxidases such as extracellular enzymes could be involved in levofloxacin degradation, with a putative major role for laccases. Degradation products were proposed based on mass spectrometry analysis, and annotation suggested that the main product of biotransformation of levofloxacin by Coriolopsis gallica is an N-oxidized derivative.

A Putative Lignin Copper Oxidase from Trichoderma reesei.

The ability of Trichoderma reesei, a fungus widely used for the commercial production of hemicellulases and cellulases, to grow and modify technical soda lignin was investigated. By quantifying fungal genomic DNA, T. reesei showed growth and sporulation in solid and liquid cultures containing lignin alone. The analysis of released soluble lignin and residual insoluble lignin was indicative of enzymatic oxidative conversion of phenolic lignin side chains and the modification of lignin structure by cleaving the ß-O-4 linkages. The results also showed that polymerization reactions were taking place. A proteomic analysis conducted to investigate secreted proteins at days 3, 7, and 14 of growth revealed the presence of five auxiliary activity (AA) enzymes in the secretome: AA6, AA9, two AA3 enzymes), and the only copper radical oxidase encoded in the genome of T. reesei. This enzyme was heterologously produced and characterized, and its activity on lignin-derived molecules was investigated. Phylogenetic characterization demonstrated that this enzyme belonged to the AA5_1 family, which includes characterized glyoxal oxidases. However, the enzyme displayed overlapping physicochemical and catalytic properties across the AA5 family. The enzyme was remarkably stable at high pH and oxidized both, alcohols and aldehydes with preference to the alcohol group. It was also active on lignin-derived phenolic molecules as well as simple carbohydrates. HPSEC and LC-MS analyses on the reactions of the produced protein on lignin dimers (SS ßß, SS ßO4 and GG ß5) uncovered the polymerizing activity of this enzyme, which was accordingly named lignin copper oxidase (TrLOx). Polymers of up 10 units were formed by hydroxy group oxidation and radical formation. The activations of lignin molecules by TrLOx along with the co-secretion of this enzyme with reductases and FAD flavoproteins oxidoreductases during growth on lignin suggest a synergistic mechanism for lignin breakdown.

Lignin from oil palm empty fruit bunches: Characterization, biological activities and application in green synthesis of silver nanoparticles.

Lignin was extracted from oil palm empty fruit bunches under four different conditions. The lignin samples were characterized and employed in the green synthesis of silver nanoparticles. Two-dimensional HSQC NMR analysis showed that lignins extracted under more aggressive conditions (3.5% acid, 60 min) exhibited less signals and thus, presented a more degraded chemical structure. Additionally, those lignins obtained under harsh conditions (3.5% acid, 60 min) exhibited higher antioxidant capacity than those obtained under mild conditions (1.5% acid, 20 min). Formation of lignin-mediated silver nanoparticles was confirmed by color change during their synthesis. The surface plasmon resonance peaks (423-427 nm) in UV-visible spectra also confirmed the synthesis of AgNPs. AgNPs showed spherical shape, polycrystalline nature and average size between 18 and 20 nm. AgNPs, in suspension, presented a negative Zeta potential profile. Lignin was assumed to contribute in the antioxidant capacity exhibited by AgNPs. All AgNPs presented no significant differences on the disk diffusion antimicrobial susceptibility test against E. coli. The minimum inhibitory concentration of HAL3-L AgNPs (62.5 µg·mL-1) was better than other physicochemically produced AgNPs (100 µg·mL-1).

Screening New Xylanase Biocatalysts from the Mangrove Soil Diversity.

Mangrove sediments from New Caledonia were screened for xylanase sequences. One enzyme was selected and characterized both biochemically and for its industrial potential. Using a specific cDNA amplification method coupled with a MiSeq sequencing approach, the diversity of expressed genes encoding GH11 xylanases was investigated beneath Avicenia marina and Rhizophora stylosa trees during the wet and dry seasons and at two different sediment depths. GH11 xylanase diversity varied more according to tree species and season, than with respect to depth. One complete cDNA was selected (OFU29) and expressed in Pichia pastoris. The corresponding enzyme (called Xyn11-29) was biochemically characterized, revealing an optimal activity at 40-50 °C and at a pH of 5.5. Xyn11-29 was stable for 48 h at 35 °C, with a half-life of 1 h at 40 °C and in the pH range of 5.5-6. Xyn11-29 exhibited a high hydrolysis capacity on destarched wheat bran, with 40% and 16% of xylose and arabinose released after 24 h hydrolysis. Its activity on wheat straw was lower, with a release of 2.8% and 6.9% of xylose and arabinose, respectively. As the protein was isolated from mangrove sediments, the effect of sea salt on its activity was studied and discussed.

Exploring the Diversity of Fungal DyPs in Mangrove Soils to Produce and Characterize Novel Biocatalysts.

The functional diversity of the New Caledonian mangrove sediments was examined, observing the distribution of fungal dye-decolorizing peroxidases (DyPs), together with the complete biochemical characterization of the main DyP. Using a functional metabarcoding approach, the diversity of expressed genes encoding fungal DyPs was investigated in surface and deeper sediments, collected beneath either Avicennia marina or Rhizophora stylosa trees, during either the wet or the dry seasons. The highest DyP diversity was observed in surface sediments beneath the R. stylosa area during the wet season, and one particular operational functional unit (OFU1) was detected as the most abundant DyP isoform. This OFU was found in all sediment samples, representing 51-100% of the total DyP-encoding sequences in 70% of the samples. The complete cDNA sequence corresponding to this abundant DyP (OFU 1) was retrieved by gene capture, cloned, and heterologously expressed in Pichia pastoris. The recombinant enzyme, called DyP1, was purified and characterized, leading to the description of its physical-chemical properties, its ability to oxidize diverse phenolic substrates, and its potential to decolorize textile dyes; DyP1 was more active at low pH, though moderately stable over a wide pH range. The enzyme was very stable at temperatures up to 50 °C, retaining 60% activity after 180 min incubation. Its ability to decolorize industrial dyes was also tested on Reactive Blue 19, Acid Black, Disperse Blue 79, and Reactive Black 5. The effect of hydrogen peroxide and sea salt on DyP1 activity was studied and compared to what is reported for previously characterized enzymes from terrestrial and marine-derived fungi.

Pycnoporus cinnabarinus glyoxal oxidases display differential catalytic efficiencies on 5-hydroxymethylfurfural and its oxidized derivatives.

BACKGROUND: 5-Hydroxymethylfurfural (HMF), a major residual component of a lignocellulosic bio-refinery process, can be transformed into fundamental building blocks for green chemistry via oxidation. While chemical methods are well established, interest is also being directed into the enzymatic oxidation of HMF into the bio-plastic precursor 2,5-furandicarboxylic acid (FDCA). RESULTS: We demonstrate that three glyoxal oxidases (PciGLOX) isoenzymes from the Basidiomycete fungus Pycnoporus cinnabarinus were able to oxidize HMF, with PciGLOX2 and PciGLOX3 being the most efficient. The major reaction product obtained with the three isoenzymes was 5-hydroxymethyl-2-furancarboxylic (HMFCA), a precursor in polyesters and pharmaceuticals production, and very little subsequent conversion of this compound was observed. However, small concentrations of FDCA, a substitute for terephthalic acid in the production of polyesters, were also obtained. The oxidation of HMF was significantly boosted in the presence of catalase for PciGLOX2, leading to 70% HMFCA yield. The highest conversion percentages were observed on 2,5-furandicarboxaldehyde (DFF), a minor product from the reaction of PciGLOX on HMF. To bypass HMFCA accumulation and exploit the efficiency of PciGLOX in oxidizing DFF and 5-formyl-2-furan carboxylic acid (FFCA) towards FDCA production, HMF was oxidized in a cascade reaction with an aryl alcohol oxidase (UmaAAO). After 2 h of reaction, UmaAAO completely oxidized HMF to DFF and further to FFCA, with FDCA only being detected when PciGLOX3 was added to the reaction. The maximum yield of 16% FDCA was obtained 24 h after the addition of PciGLOX3 in the presence of catalase. CONCLUSIONS: At least two conversion pathways for HMF oxidation can be considered for PciGLOX; however, the highest selectivity was seen towards the production of the valuable polyester precursor HMFCA. The three isoenzymes showed differences in their catalytic efficiencies and substrate specificities when reacted with HMF derivatives.

Arthrospira maxima OF15 biomass cultivation at laboratory and pilot scale from sugarcane vinasse for potential biological new peptides production.

An environmental friendly process was developed to produce Arthrospira maxima's biomass from sugarcane vinasse, which was generated in a bioethanol production chain, at laboratory and pilot scale. Peptides fractions were than obtained from enzymatically hydrolyzed biomass. High microalgae biomass productivities were reached (0.150 g L-1 day-1) coupled with a significant reduction of BOD and COD (89.2 and 81%, respectively). Three peptide fractions were obtained from microalgae biomass through single or sequential enzymatic hydrolysis. Antioxidant, antimicrobial, anti-inflammatory, and/or anti-collagenase activities of biopetides' fractions were observed. The PHS showed multi-biological activities. The three peptides fractions could be potential candidates for different applications in pharmaceutical, cosmetic and food industry.

High-frequency, high-intensity electromagnetic field effects on Saccharomyces cerevisiae conversion yields and growth rates in a reverberant environment.

Studies of the effects of electromagnetic waves on Saccharomyces cerevisiae emphasize the need to develop instrumented experimental systems ensuring a characterization of the exposition level to enable unambiguous assessment of their potential effects on living organisms. A bioreactor constituted with two separate compartments has been designed. The main element (75% of total volume) supporting all measurement and control systems (temperature, pH, agitation, and aeration) is placed outside the exposure room whereas the secondary element is exposed to irradiation. Measurements of the medium dielectric properties allow the determination of the electromagnetic field at any point inside the irradiated part of the reactor and are consistent with numerical simulations. In these conditions, the growth rate of Saccharomyces cerevisiae and the ethanol yield in aerobic conditions are not significantly modified when submitted to an electromagnetic field of 900 and 2400 MHz with an average exposition of 6.11 V.m-1 and 3.44 V.m-1 respectively.

Modelling the Maillard reaction during the cooking of a model cheese.

During processing and storage of industrial processed cheese, odorous compounds are formed. Some of them are potentially unwanted for the flavour of the product. To reduce the appearance of these compounds, a methodological approach was employed. It consists of: (i) the identification of the key compounds or precursors responsible for the off-flavour observed, (ii) the monitoring of these markers during the heat treatments applied to the cheese medium, (iii) the establishment of an observable reaction scheme adapted from a literature survey to the compounds identified in the heated cheese medium (iv) the multi-responses stoichiokinetic modelling of these reaction markers. Systematic two-dimensional gas chromatography time-of-flight mass spectrometry was used for the semi-quantitation of trace compounds. Precursors were quantitated by high-performance liquid chromatography. The experimental data obtained were fitted to the model with 14 elementary linked reactions forming a multi-response observable reaction scheme.

Dextranase immobilization on epoxy CIM(®) disk for the production of isomaltooligosaccharides from dextran.

Endodextranase D8144 from Penicillium sp. (EC 3.2.1.2.) was immobilized on an epoxy-activated monolithic Convective Interaction Media (CIM(®)) disk in order to produce isomaltooligosaccharides (IMOS) from Dextran T40 in a continuous IMmobilized Enzymes Reactor (IMER). Enzymatic parameters and structure of IMOS were studied for free and immobilized enzymes. The immobilization efficiency of endodextranase D8144 was about 15.9% (w/w) and the real specific activity was close to 6.5 U mg enz(-1). The Km values (4.8 ± 0.2 g L(-1)) for free and immobilized enzymes were the same, showing the absence of diffusional limitation. Moreover, specific patterns of DPs (Degrees of Polymerization) distributions were observed during the enzymatic hydrolysis by HPAEC-PAD (High Pressure Anion Exchange Chromatography-Pulsed Amperometric Detection). Thus, sought-after sizes of IMOS (DPs 8-10) were generated all over the hydrolysis. Finally, the results showed the high stability of this IMER since a relative enzymatic activity about 78% was measured after 5400 volumes column.

Osteoblast cell behavior on the new beta-type Ti-25Ta-25Nb alloy.

Among metallic materials used as bone substitutes, ß titanium alloys gain an increasing importance because of their low modulus, high corrosion resistance and good biocompatibility. In this work, an investigation of the in vitro cytocompatibility of a recently new developed ß-type Ti-25Ta-25Nb alloy was carried out by evaluating the behavior of human osteoblasts. The metallic Ti-6Al-4V biomaterial, which is one of representative α+ß type titanium alloys for biomedical applications, and Tissue Culture Polystyrene (TCPS), were also investigated as reference Ti-based material and control substrate, respectively. Both metallic surfaces were analyzed by X-ray diffraction, atomic force microscopy and X-ray photoelectron spectroscopy. The cellular response was quantified by assessments of viability, cell attachment and spreading, cell morphology, production and extracellular organization of fibronectin and cell proliferation. Polished surfaces from both materials having an equiaxed grain microstructure and nanometre scale surface roughness elicited an essentially identical osteoblast response in terms of all analyzed cellular parameters. Thus, on both surfaces the cells displayed high survival rates, good cell adhesion and spreading, a dense and randomly dispersed fibronectin matrix and increasing cell proliferation rates over the incubation time. Furhermore, the enhanced biological performance of Ti-25Ta-25Nb was highly supported by the results obtained in comparison with TCPS. These findings, together with previously shown superelastic behavior, low Young's modulus and high corrosion resistance, recommend Ti-25Ta-25Nb as good candidate for applications in bone implantology.