RESUMO
Polar and chiral crystal symmetries confer a variety of potentially useful functionalities upon solids by coupling otherwise noninteracting mechanical, electronic, optical, and magnetic degrees of freedom. We describe two phases of the 3D perovskite, CsSnBr3, which emerge below 85 K due to the formation of Sn(II) lone pairs and their interaction with extant octahedral tilts. Phase II (77 K < T < 85 K, space group P21/m) exhibits ferroaxial order driven by a noncollinear pattern of lone pair-driven distortions within the plane normal to the unique octahedral tilt axis, preserving the inversion symmetry observed at higher temperatures. Phase I (T < 77 K, space group P21) additionally exhibits ferroelectric order due to distortions along the unique tilt axis, breaking both inversion and mirror symmetries. This polar and chiral phase exhibits second harmonic generation from the bulk and pronounced electrostriction and negative thermal expansion along the polar axis (Q22 ≈ 1.1 m4 C-2; αb = -7.8 × 10-5 K-1) through the onset of polarization. The structures of phases I and II were predicted by recursively following harmonic phonon instabilities to generate a tree of candidate structures and subsequently corroborated by synchrotron X-ray powder diffraction and polarized Raman and 81Br nuclear quadrupole resonance spectroscopies. Preliminary attempts to suppress unintentional hole doping to allow for ferroelectric switching are described. Together, the polar symmetry, small band gap, large spin-orbit splitting of Sn 5p orbitals, and predicted strain sensitivity of the symmetry-breaking distortions suggest bulk samples and epitaxial films of CsSnBr3 or its neighboring solid solutions as candidates for bulk Rashba effects.
RESUMO
Li3Y1-xInxCl6 undergoes a phase transition from trigonal to monoclinic via an intermediate orthorhombic phase. Although the trigonal yttrium containing the end member phase, Li3YCl6, synthesized by a mechanochemical route, is known to exhibit stacking fault disorder, not much is known about the monoclinic phases of the serial composition Li3Y1-xInxCl6. This work aims to shed light on the influence of the indium substitution on the phase evolution, along with the evolution of stacking fault disorder using X-ray and neutron powder diffraction together with solid-state nuclear magnetic resonance spectroscopy, studying the lithium-ion diffusion. Although Li3Y1-xInxCl6 with x ≤ 0.1 exhibits an ordered trigonal structure like Li3YCl6, a large degree of stacking fault disorder is observed in the monoclinic phases for the x ≥ 0.3 compositions. The stacking fault disorder materializes as a crystallographic intergrowth of faultless domains with staggered layers stacked in a uniform layer stacking, along with faulted domains with randomized staggered layer stacking. This work shows how structurally complex even the "simple" series of solid solutions can be in this class of halide-based lithium-ion conductors, as apparent from difficulties in finding a consistent structural descriptor for the ionic transport.
RESUMO
Herein, we report a facile postsynthetic linkage conversion method giving synthetic access to nitrone-linked covalent organic frameworks (COFs) from imine- and amine-linked COFs. The new two-dimensional (2D) nitrone-linked covalent organic frameworks, NO-PI-3-COF and NO-TTI-COF, are obtained with high crystallinity and large surface areas. Nitrone-modified pore channels induce condensation of water vapor at 20% lower humidity compared to their amine- or imine-linked precursor COFs. Thus, the topochemical transformation to nitrone linkages constitutes an attractive approach to postsynthetically fine-tune water adsorption properties in framework materials.
RESUMO
In lithium thiocyanate Li(SCN), the temperature regime below the melting point (274 °C) is characterized by excess conductivities over the usual Arrhenius behavior (premelting regime). Here, the Schottky defect pair concentration is high, and the point defect chemistry can no longer be considered as dilute. Coulomb interactions of Schottky pairs are expected to occur lowering the formation energy of new carriers and hence leading avalanche-like to a transition into a fully defective superionic state. The respective non-linear behavior is investigated using the cube-root law approach characterized by a defect interaction parameter J, which is a measure of the effective defect-lattice energy. In the case of Li(SCN), the rather pronounced volume expansion is to be included in the model. A literature comparison with other materials emphasizes to what degree defect formation as well as defect interactions depend not only on the dominant mobile defect, but also on the respective sublattice. Overall, a quantitative description of the defect chemistry of Li(SCN) in the premelting regime is derived.
RESUMO
This work reports on the ion transport properties and defect chemistry in anhydrous lithium thiocyanate Li(SCN), which is a pseudo-halide Li+ cation conductor. An extensive doping study was conducted, employing magnesium, zinc and cobalt thiocyanate as donor dopants to systematically vary the conductivity and derive a defect model. The investigations are based on impedance measurements and supported by other analytical techniques such as X-ray powder diffraction (XRPD), infrared (IR) spectroscopy, and density functional theory (DFT) calculations. The material was identified as Schottky disordered with lithium vacancies being the majority mobile charge carriers. In the case of Mg2+ as dopant, defect association with lithium vacancies was observed at low temperatures. Despite a comparably low Schottky defect formation enthalpy of (0.6 ± 0.3) eV, the unexpectedly high lithium vacancy migration enthalpy of (0.89 ± 0.08) eV distinguishes Li(SCN) from the chemically related lithium halides. A detailed defect model of Li(SCN) is presented and respective thermodynamic and kinetic data are given. The thiocyanate anion (SCN)- has a significant impact on ion mobility due to its anisotropic structure and bifunctionality in forming both Li-N and Li-S bonds. More details about the impact on ion dynamics at local and global scale, and on the defect chemical analysis of the premelting regime at high temperatures are given in separate publications (Part II and Part III).
RESUMO
Covalent organic frameworks (COFs) with a pore size beyond 5 nm are still rarely seen in this emerging field. Besides obvious complications such as the elaborated synthesis of large linkers with sufficient solubility, more subtle challenges regarding large-pore COF synthesis, including pore occlusion and collapse, prevail. Here we present two isoreticular series of large-pore imine COFs with pore sizes up to 5.8 nm and correlate the interlayer interactions with the structure and thermal behavior of the COFs. By adjusting interlayer interactions through the incorporation of methoxy groups acting as pore-directing "anchors", different stacking modes can be accessed, resulting in modified stacking polytypes and, hence, effective pore sizes. A strong correlation between stacking energy toward highly ordered, nearly eclipsed structures, higher structural integrity during thermal stress, and a novel, thermally induced phase transition of stacking modes in COFs was found, which sheds light on viable design strategies for increased structural control and stability in large-pore COFs.
RESUMO
Helical motifs are common in nature, for example, the DNA double or the collagen triple helix. In the latter proteins, the helical motif originates from glycine, the smallest amino acid, whose molecular confirmation is closely related to acetic acid. The combination of acetic acid with calcium and water, which are also omnipresent in nature, materializing as calcium acetate hemihydrate, was now revealed to exhibit a collagen-like triple helix structure. This calcium salt is observed as efflorescence phase on calcareous heritage objects, like historic Mollusca shells, pottery or marble reliefs. In a model experiment pure calcium acetate hemihydrate was crystallized on the surface of a terracotta vessel. Calcium acetate hemihydrate crystallizes in a surprisingly large unit cell with a volume of 11,794.5(3)â Å3 at ambient conditions. Acetate ions bridge neighboring calcium cations forming spiral chains, which are arranged in a triple helix motif.
RESUMO
Reduced shear stress resulting from disturbed blood flow can impair endothelial integrity and drive the development of vascular inflammatory lesions. Metalloproteinases of the ADAM family have been implicated in the regulation of cell survival and inflammatory responses. Here we investigate the mechanism and function of ADAM15 upregulation in primary flow cultured endothelial cells. Transcriptomic analysis indicated that within the ADAM family ADAM15 mRNA is most prominently upregulated (4-fold) when endothelial cells are exposed to physiologic shear stress. This induction was confirmed in venous, arterial and microvascular endothelial cells and is associated with increased presence of ADAM15 protein in the cell lysates (5.6-fold) and on the surface (3.1-fold). The ADAM15 promoter contains several consensus sites for the transcription factor KLF2 which is also upregulated by shear stress. Induction of endothelial KLF2 by simvastatin treatment is associated with ADAM15 upregulation (1.8-fold) which is suppressed by counteracting simvastatin with geranylgeranyl pyrophosphate. KLF2 overexpression promotes ADAM15 expression (2.1-fold) under static conditions whereas KLF2 siRNA knockdown prevents ADAM15 induction by shear stress. Functionally, ADAM15 promotes survival of endothelial cells challenged by growth factor depletion or TNF stimulation as shown by ADAM15 shRNA knockdown (1.6-fold). Exposure to shear stress increases endothelial survival while additional knockdown of ADAM15 reduces survival (6.7-fold) under flow conditions. Thus, physiologic shear stress resulting from laminar flow promotes KLF2 induced ADAM15 expression which contributes to endothelial survival. The absence of ADAM15 at low shear stress or static conditions may therefore lead to increased endothelial damage and promote vascular inflammation.
Assuntos
Proteínas ADAM/genética , Células Endoteliais/fisiologia , Proteínas de Membrana/genética , Regulação para Cima/genética , Células Cultivadas , Endotélio Vascular/fisiologia , Regulação da Expressão Gênica/genética , Células Endoteliais da Veia Umbilical Humana , Humanos , RNA Mensageiro/genética , Estresse MecânicoRESUMO
The investigation of the corrosion of a lid made from a tin-lead alloy of a 200 years old beer jug induced by the degradation of the potash based glass revealed SnO, Cerussite (PbCO3) and K(OH)·2PbCO3 as main corrosion product. A model experiment, simulating the corrosion of lead at room temperature confirmed the formation of K(OH)·2PbCO3 as a corrosion product in alkaline, potassium containing medium. For detailed characterization K(OH)·2PbCO3 was prepared by hydrothermal synthesis, as well. K(OH)·2PbCO3 crystallizes in space group P63/mmc with lattice parameters of a = 5.3389(1) Å and c = 13.9295(5) Å. The structure consists of Pb(OH)1/2(CO3)6/9[CO3]3/91/2- layers and intercalated K+ and exhibits a close relationship to the crystal structure of hydrocerussite (Pb(OH)2·2PbCO3), also known as "lead white". A novel structure family, Mn+(OH)n·2PbCO3 (with n = 1,2), was identified by structure solution of K(OH)·2PbCO3, which can be assigned to a 2H-type subspecies and detailed comparison to Pb(OH)2·2PbCO3, which represents a 3R-type subspecies.
RESUMO
For the first time a basic transition-metal hydrate, Ni3Cl2.1(OH)3.9·4H2O, is found to be isostructural to a main-group metal phase, Mg3Cl2.0(OH)4.0·4H2O. The Ni phase was found as crystalline solid in the course of investigations into the formation of basic nickel(II) chloride phases at 25 and 40 °C in alkaline, concentrated nickel(II) chloride solutions. Ni3Cl2.1(OH)3.9·4H2O was characterized by thermal analysis, IR spectroscopy, scanning electron microscopy, and X-ray powder diffraction. The crystal structure was determined from high-resolution laboratory X-ray powder diffraction data. Ni3Cl2.1(OH)3.9·4H2O crystallizes in space group C2/m (12) with Z = 2, a = 14.9575(4) Å, b = 3.1413(1) Å, c = 10.4818(5) Å, ß = 101.482(1)°, and V = 482.50(3) Å(3). The main building unit of the structure is an infinite triple chain of edge-linked distorted NiO6 octahedra. These chains are separated by interstitial one-dimensional zigzag chains of disordered Cl(-) ions and H2O molecules. The crystal structures of Ni3Cl2.1(OH)3.9·4H2O and the isostructural magnesium salt hydrate Mg3Cl2(OH)4·4H2O (2-1-4 phase) are compared in detail.
RESUMO
Microcrystalline powder of previously unknown thallium(I) chloride hydroborate Tl3Cl[B12H12] was obtained through the reaction of thallium(I) oxocarbonate Tl2[CO3] with an aqueous solution of (H3O)2[B12H12] in the presence of chloride anions. Tl3Cl[B12H12] crystallises in a primitive, orthorhombic lattice with the space group Pnma (a = 835.189(7) pm, b = 970.132(8) pm and c = 1597.912(12) pm for Z = 4) showing a distorted hexagonal anti-perovskite type arrangement of the ions. The structure features two thallium sites with mixed coordination spheres consisting of borate related hydrogen atoms and chloride anions with coordination numbers of eleven and thirteen. Tl3Cl[B12H12] shows strong excitation bands at 240 and 260 nm attributed to the 1S0 â 3P2 and 1S0 â 3P1 interconfigurational transitions of the Tl+ 6s2 cations, respectively. The emission spectrum at 300 K upon VUV excitation exhibits a broad band at 440 nm with a quantum efficiency of 41%. In addition, temperature-dependent emission spectra, colour points, reflectance, decay time, thermal quenching curve and radioluminescence spectra for Tl3Cl[B12H12] were determined.
RESUMO
Cu2ZnSnS4 (CZTS) is an attractive material for sustainable photovoltaics and thermoelectrics, and several properties originate from its marked polymorphism. High-energy mechanical alloying is found to lead to a disordered phase that possesses a sphalerite-like cubic structure. This is investigated in detail with the aid of laboratory and synchrotron radiation X-ray diffraction, Raman spectroscopy, electron microscopy and ab initio molecular dynamics. The disordered cubic polymorph is preserved below 663â K. With thermal treatments above 663â K, the tetragonal kesterite phase forms, used here as a reference for structural and microstructural features. Particular attention is paid to the stacking arrangement: a significant fraction of twin faults was found in the disordered cubic samples, which then progressively annealed with domain growth and with the transition to the ordered tetragonal phase. This study also focuses on Debye-Waller coefficients, which were found to be considerably larger for the disordered cubic than the tetragonal sample. Indeed, disorder leads to an â¼1â Å2 upward shift through the temperature range 100-700â K, a feature confirmed by ab initio calculations, which points to a particularly high contribution from disordered Sn cations. This supports the general understanding that structural disorder introduces a temperature-independent static contribution to the atomic mean-square displacement. Debye-Waller coefficients are found to be a good measure of this disorder, known to have a critical effect on transport properties.
RESUMO
Carbon nitrides are among the most studied materials for photocatalysis; however, limitations arise from inefficient charge separation and transport within the material. Here, this aspect is addressed in the 2D carbon nitride poly(heptazine imide) (PHI) by investigating the influence of various counterions, such as M = Li+ , Na+ , K+ , Cs+ , Ba2+ , NH4 + , and tetramethyl ammonium, on the material's conductivity and photocatalytic activity. These ions in the PHI pores affect the stacking of the 2D layers, which further influences the predominantly ionic conductivity in M-PHI. Na-containing PHI outperforms the other M-PHIs in various relative humidity (RH) environments (0-42%RH) in terms of conductivity, likely due to pore-channel geometry and size of the (hydrated) ion. With increasing RH, the ionic conductivity increases by 4-5 orders of magnitude (for Na-PHI up to 10-5 S cm-1 at 42%RH). At the same time, the highest photocatalytic hydrogen evolution rate is observed for Na-PHI, which is mirrored by increased photogenerated charge-carrier lifetimes, pointing to efficient charge-carrier stabilization by, e.g., mobile ions. These results indicate that also ionic conductivity is an important parameter that can influence the photocatalytic activity. Besides, RH-dependent ionic conductivity is of high interest for separators, membranes, or sensors.
RESUMO
Single-phase chalcopyrite (CuFeS2) is a key reference material in the development of new metallurgical processes to ensure a reliable copper supply. Here, we report on the successful synthesis of single-phase chalcopyrite and its phase behaviour. We further rationalise different opinions previously expressed in the literature. Chalcopyrite synthesis has been studied at 450 °C with varying sulfur contents and analysed using X-ray powder diffraction (XRPD) and 57Fe-Mössbauer spectroscopy. With stoichiometric amounts (Cu : Fe : S = 25 : 25 : 50) the main chalcopyrite phase is contaminated with pyrite (FeS2) and bornite (Cu5FeS4). Single-phase chalcopyrite was only found in samples containing around 49.7 at% sulfur in the reactant mixture. Mößbauer spectroscopy confirmed that chalcopyrite contains trivalent iron. Temperature dependent XRPD measurements detected an order-disorder phase transition starting at 485 °C. At temperatures above 535 °C, samples only contained intermediate solid solutions. These adopt the sphalerite structure with the lattice constant slightly varying with Cu : Fe ratio.
RESUMO
Mg(SCN)2·4H2O can be converted into previously unknown compounds Mg(SCN)2·(4 - x) H2O·xTHF with x = 0, 2 and 4 by multiple recrystallization in tetrahydrofuran (THF). The phases were characterized by infrared spectroscopy (IR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), and their crystal structures were solved from X-ray powder diffraction (XRPD) data. In the crystal structures isolated Mg(NCS)2(H2O)4-x(THF)x units form layered motifs. The thermal behavior of Mg(SCN)2·4H2O and Mg(SCN)2·4THF was investigated by temperature dependent in situ XRPD, where Mg(SCN)2·4THF was found to acquire a room temperature (α-form) and high temperature modification (ß-form). The phase transformation is associated with an order-disorder transition of the THF molecules and with a reversion of the stacking order of the layered motifs. Further heating eventually leads to the formation of Mg(SCN)2·2THF. There thiocyanate related sulfur atoms fill the voids in the coordination sphere of magnesium, which leads to the formation of one dimensional electroneutral ∞[Mg(NCS)2/2(SCN)2/2(THF)2] chains. All investigated Mg(SCN)2·(4 - x) H2O·xTHF phases exhibit a remarkable anisotropic thermal expansion, and Mg(SCN)2·4H2O and Mg(SCN)2·2THF were found to show both positive and negative thermal expansion coefficients.
RESUMO
Li[SCN]·THF and Li[SCN]·2THF can be obtained from solutions of anhydrous Li[SCN] in tetrahydrofuran (C4H8O, THF). Both compounds are very hygroscopic and slowly decompose even at room temperature. At ambient conditions Li[SCN]·THF crystallizes in the monoclinic space group P21/c with the lattice parameters a = 574.41(2), b = 1643.11(6), c = 830.15(3) pm and ß = 99.009(1)° for Z = 4 as determined by laboratory X-ray powder diffraction. Its crystal structure contains Li+ cations surrounded by one THF molecule and three thiocyanate anions [SCN]- forming {Li[NCS]2[SCN](OC4H8)}2- tetrahedra, which join together as pairs via shared Nâ¯N edges. CHNS combustion analysis and vibrational spectroscopy confirmed its composition, whereas differential scanning calorimetry and thermogravimetric analysis coupled with a mass spectrometer were applied to record its thermal behaviour. Li[SCN]·2THF crystallises in a primitive monoclinic lattice as well, but in the space group P21/n with the lattice parameters a = 1132.73(3), b = 1637.98(3), c = 1264.88(2) pm and ß = 94.393(2)° for Z = 8 as determined from single-crystal X-ray diffraction data at 100 K. Its structure contains two crystallographically independent Li+-centred tetrahedra {Li[NCS]2(OC4H8)2}-, which form dimers {(C4H8O)2Li[µ2-NCS]2Li(OC4H8)2} via shared Nâ¯N edges. They are merely stabilised by weak agostic Hâ¯S interactions between some CH2-groups of the C4H8O molecules and the [NCS]- ligands.
RESUMO
The metastable phase 9Mg(OH)(2)·MgCl(2)·4H(2)O (9-1-4 phase) was found at the extended metastable isotherm of Mg(OH)(2) in the system MgO-MgCl(2)-H(2)O at 120 °C and occurs as intermediate binder phase during setting of magnesia cement due to temperature development of the setting reaction. The crystal structure of the 9-1-4 phase was solved from high resolution laboratory X-ray powder diffraction data in space group I2/m (C2/m) (a = 22.2832(3) Å, b = 3.13501(4) Å, c = 8.1316(2) Å, ß = 97.753(1)°, V = 562.86(2) Å(3), and Z = 1). Structural and characteristical relations of the phases in the system MgO-MgCl(2)-H(2)O can be derived, with which the development of the cement or concrete qualities becomes explainable.
Assuntos
Cloreto de Magnésio/química , Hidróxido de Magnésio/química , Óxido de Magnésio/química , Temperatura , Água/química , Tamanho da Partícula , Difração de Pó , SolubilidadeRESUMO
The microstructures of six stacking-faulted industrially produced cobalt- and aluminium-bearing nickel layered double hydroxide (LDH) samples that are used as precursors for Li(Ni1-x-yCo x Al y )O2 battery materials were investigated. Shifts from the brucite-type (AγB)â¡(AγB)â¡ stacking pattern to the CdCl2-type (AγB)â¡(CßA)â¡(BαC)â¡ and the CrOOH-type (BγA)â¡(AßC)â¡(CαB)â¡ stacking order, as well as random intercalation of water molecules and carbonate ions, were found to be the main features of the microstructures. A recursive routine for generating and averaging supercells of stacking-faulted layered substances implemented in the TOPAS software was used to calculate diffraction patterns of the LDH phases as a function of the degree of faulting and to refine them against the measured diffraction data. The microstructures of the precursor materials were described by a model containing three parameters: transition probabilities for generating CdCl2-type and CrOOH-type faults and a transition probability for the random intercalation of water/carbonate layers. Automated series of simulations and refinements were performed, in which the transition probabilities were modified incrementally and thus the microstructures optimized by a grid search. All samples were found to exhibit the same fraction of CdCl2-type and CrOOH-type stacking faults, which indicates that they have identical Ni, Co and Al contents. Different degrees of interstratification faulting were determined, which could be correlated to different heights of intercalation-water-related mass-loss steps in the thermal analyses.
RESUMO
Interactions between extended π-systems are often invoked as the main driving force for stacking and crystallization of 2D organic polymers. In covalent organic frameworks (COFs), the stacking strongly influences properties such as the accessibility of functional sites, pore geometry, and surface states, but the exact nature of the interlayer interactions is mostly elusive. The stacking mode is often identified as eclipsed based on observed high symmetry diffraction patterns. However, as pointed out by various studies, the energetics of eclipsed stacking are not favorable and offset stacking is preferred. This work presents lower and higher apparent symmetry modifications of the imine-linked TTI-COF prepared through high- and low-temperature reactions. Through local structure investigation by pair distribution function analysis and simulations of stacking disorder, we observe random local layer offsets in the low temperature modification. We show that while stacking disorder can be easily overlooked due to the apparent crystallographic symmetry of these materials, total scattering methods can help clarify this information and suggest that defective local structures could be much more prevalent in COFs than previously thought. A detailed analysis of the local structure helps to improve the search for and design of highly porous tailor-made materials.
RESUMO
Although a plethora of metal complexes have been characterized, those having multifunctional properties are very rare. This article reports three isotypical complexes, namely [Cu(benzoate)L 2], where L = 4-styryl-pyridine (4spy) (1), 2'-fluoro-4-styryl-pyridine (2F-4spy) (2) and 3'-fluoro-4-styryl-pyridine (3F-4spy) (3), which show photosalient behavior (photoinduced crystal mobility) while they undergo [2+2] cyclo-addition. These crystals also exhibit anisotropic thermal expansion when heated from room temperature to 200°C. The overall thermal expansion of the crystals is impressive, with the largest volumetric thermal expansion coefficients for 1, 2 and 3 of 241.8, 233.1 and 285.7 × 10-6â K-1, respectively, values that are comparable to only a handful of other reported materials known to undergo colossal thermal expansion. As a result of the expansion, their single crystals occasionally move by rolling. Altogether, these materials exhibit unusual and hitherto untapped solid-state properties.