Non-Diffractive Bessel Beams for Ultrafast Laser Scanning Platform and Proof-Of-Concept Side-Wall Polishing of Additively Manufactured Parts.

We report the potential use of non-diffractive Bessel beam for ultrafast laser processing in additive manufacturing environments, its integration into a fast scanning platform, and proof-of-concept side-wall polishing of stainless steel-based additively fabricated parts. We demonstrate two key advantages of the zeroth-order Bessel beam: the significantly long non-diffractive length for large tolerance of sample positioning and the unique self-reconstruction property for un-disrupted beam access, despite the obstruction of metallic powders in the additive manufacturing environment. The integration of Bessel beam scanning platform is constructed by finely adapting the Bessel beam into a Galvano scanner. The beam sustained its good profile within the scan field of 35 × 35 mm2. As a proof of concept, the platform showcases its advanced capacity by largely reducing the side-wall surface roughness of an additively as-fabricated workpiece from Ra 10 µm down to 1 µm. Therefore, the demonstrated Bessel-Scanner configuration possesses great potential for integrating in a hybrid additive manufacturing apparatus.

Laser-Based Hybrid Manufacturing of Endosseous Implants: Optimized Titanium Surfaces for Enhancing Osteogenic Differentiation of Human Mesenchymal Stem Cells.

Additive manufacturing (AM) is becoming increasingly important in the orthopedic and dental sectors thanks to two major advantages: the possibility of custom manufacturing and the integration of complex structures. However, at smaller scales, surface conditions of AM products are not mastered. Numerous non-fused powder particles give rise to roughness values (Sa) greater than 10 µm, thus limiting biomedical applications since the surface roughness of, e.g., metal implants plays a major role in the quality and rate of osseointegration. In this study, an innovative hybrid machine combining AM and a femtosecond laser (FS) was used to obtain Ti6Al4V parts with biofunctional surfaces. During the manufacturing process, the FS laser beam "neatly" ablates the surface, leaving in its path nanostructures created by the laser/matter interaction. This step decreases the Sa from 11 to 4 µm and increases the surface wettability. The behavior of human mesenchymal stem cells was evaluated on these new AM+FS surfaces and compared with that on AM surfaces and also on polished surfaces. The number of cells attached 24 h after plating is equivalent on all surfaces, but cell spreading is higher on AM+FS surfaces compared with their AM counterparts. In the longer term (days 7 and 14), fibronectin and collagen synthesis increase on AM+FS surfaces as opposed to AM alone. Alkaline phosphatase activity, osteocalcin production, and mineralization, markers of osteogenic differentiation, are significantly lower on raw AM surfaces, whereas on the AM+FS specimens they display a level equivalent to that on the polished surface. Overall, these results indicate that using an FS laser beam during the fabrication of AM parts optimizes surface morphology to favor osteoblastic differentiation. This new hybrid machine could make it possible to produce AM implants with functional surfaces directly at the end of AM, thereby limiting their post-treatments.