Experimental Low-Latency Device-Independent Quantum Randomness.

Applications of randomness such as private key generation and public randomness beacons require small blocks of certified random bits on demand. Device-independent quantum random number generators can produce such random bits, but existing quantum-proof protocols and loophole-free implementations suffer from high latency, requiring many hours to produce any random bits. We demonstrate device-independent quantum randomness generation from a loophole-free Bell test with a more efficient quantum-proof protocol, obtaining multiple blocks of 512 random bits with an average experiment time of less than 5 min per block and with a certified error bounded by 2^{-64}≈5.42×10^{-20}.

Calibration of free-space and fiber-coupled single-photon detectors.

We measure the detection efficiency of single-photon detectors at wavelengths near 851 nm and 1533.6 nm. We investigate the spatial uniformity of one free-space-coupled single-photon avalanche diode and present a comparison between fusion-spliced and connectorized fiber-coupled single-photon detectors. We find that our expanded relative uncertainty for a single measurement of the detection efficiency is as low as 0.70% for fiber-coupled measurements at 1533.6 nm and as high as 1.78% for our free-space characterization at 851.7 nm. The detection-efficiency determination includes corrections for afterpulsing, dark count, and count-rate effects of the single-photon detector with the detection efficiency interpolated to operation at a specified detected count rate.

Switchable detector array scheme to reduce the effect of single-photon detector's deadtime in a multi-bit/photon quantum link.

We explore the use of a switchable single-photon detector (SPD) array scheme to reduce the effect of a detector's deadtime for a multi-bit/photon quantum link. The case of data encoding using M possible orbital-angular-momentum (OAM) states is specifically studied in this paper. Our method uses N SPDs with a controllable M × N optical switch and we use a Monte Carlo-based method to simulate the quantum detection process. The simulation results show that with the use of the switchable SPD array, the detection system can allow a higher incident photon rate than what might otherwise be limited by detectors' deadtime. For the case of M = 4, N = 20, a 50-ns deadtime for the individual SPDs, an average photon number per pulse of 0.1, and under the limit that at most 10 % of the photon-containing pulses are missed, the switchable SPD array will allow an incident photon rate of 2250 million counts/s (Mcts/s). This is 25 times the 90 Mcts/s incident photon rate that a non-switchable, 4-SPD array will allow. The increase in incident photon rate is more than the 5 times increase, which is the simple increase in the number of SPDs and the number of OAM encoding states (e.g., N/M = 20/4).

A post-processing-free single-photon random number generator with ultra-low latency.

The low-latency requirements of a practical loophole-free Bell test preclude time-consuming post-processing steps that are often used to improve the statistical quality of a physical random number generator (RNG). Here we demonstrate a post-processing-free RNG that produces a random bit within 2.4(2) ns of an input trigger. We use weak feedback to eliminate long-term drift, resulting in 24 hour operation with output that is statistically indistinguishable from a Bernoulli process. We quantify the impact of the feedback on the predictability of the output as less than 6.4×10-7 and demonstrate the utility of the Allan variance as a tool for characterizing non-idealities in RNGs.

Simple autocorrelation method for thoroughly characterizing single-photon detectors.

We introduce and demonstrate a simple and highly sensitive method for characterizing single-photon detectors. This method is based on analyzing multi-order correlations among time-tagged detection events from a device under calibrated continuous-wave illumination. First- and second-order properties such as detection efficiency, dark count rate, afterpulse probability, dead time, and reset behavior are measured with high accuracy from a single data set, as well as higher-order properties such as higher-order afterpulse effects. While the technique is applicable to any type of click/no-click detector, we apply it to two different single-photon avalanche diodes, and we find that it reveals a heretofore unreported afterpulse effect due to detection events that occur during the device reset.

Strong Loophole-Free Test of Local Realism.

We present a loophole-free violation of local realism using entangled photon pairs. We ensure that all relevant events in our Bell test are spacelike separated by placing the parties far enough apart and by using fast random number generators and high-speed polarization measurements. A high-quality polarization-entangled source of photons, combined with high-efficiency, low-noise, single-photon detectors, allows us to make measurements without requiring any fair-sampling assumptions. Using a hypothesis test, we compute p values as small as 5.9×10^{-9} for our Bell violation while maintaining the spacelike separation of our events. We estimate the degree to which a local realistic system could predict our measurement choices. Accounting for this predictability, our smallest adjusted p value is 2.3×10^{-7}. We therefore reject the hypothesis that local realism governs our experiment.

Efficient single-spatial-mode periodically-poled KTiOPO4 waveguide source for high-dimensional entanglement-based quantum key distribution.

We demonstrate generation of high-purity photon pairs at 1560 nm in a single spatial mode from a periodically-poled KTiOPO4 (PPKTP) waveguide. With nearly lossless spectral filtering, the PPKTP waveguide source shows approximately 80 % single-mode fiber coupling efficiency and is well suited for high-dimensional time-energy entanglement-based quantum key distribution. Using high-count-rate self-differencing InGaAs single-photon avalanche photodiodes configured with either square or sinusoidal gating, we achieve > 1 Mbit/s raw key generation with 3 bits-per-photon encoding, and, to the best of our knowledge, the highest reported Franson quantum-interference visibility of 98.2 % without subtraction of accidental coincidences.

Up-conversion single-photon detector using multi-wavelength sampling techniques.

The maximum achievable data-rate of a quantum communication system can be critically limited by the efficiency and temporal resolution of the system's single-photon detectors. Frequency up-conversion technology can be used to increase detection efficiency for IR photons. In this paper we describe a scheme to improve the temporal resolution of an up-conversion single-photon detector using multi-wavelength optical-sampling techniques, allowing for increased transmission rates in single-photon communications systems. We experimentally demonstrate our approach with an up-conversion detector using two spectrally and temporally distinct pump pulses, and show that it allows for high-fidelity single-photon detection at twice the rate supported by a conventional single-pump up-conversion detector. We also discuss the limiting factors of this approach and identify important performance-limiting trade offs.

Low-noise photon counting above 100 million counts per second with a high-efficiency reach-through single-photon avalanche diode system.

We demonstrate a method that allows a high-efficiency single-photon-avalanche diode (SPAD) with a thick absorption region (> 10 µm) to count single photons at rates significantly higher than previously demonstrated. We apply large (> 30 V) AC bias gates to the SPAD at 1 GHz and detect minute avalanches with a discrimination threshold of 5(1) mV by means of radio-frequency (RF) interferometry. We measure a reduction by a factor of ≈ 500 in the average charge per avalanche when compared to operation in its traditional active-quenching module, and a relative increase of >19 % in detection efficiency at 850 nm. The reduction in charge strongly suppresses self-heating effects in the diode that can degrade performance at high avalanche rates. We show that the single-photon detection system maintains high efficiency at count rates exceeding 108s-1.

Experimental study of high speed polarization-coding quantum key distribution with sifted-key rates over Mbit/s.

We present a quantitative study of various limitations on quantum cryptographic systems operating with sifted-key rates over Mbit/s. The dead time of silicon APDs not only limits the sifted-key rate but also causes correlation between the neighboring key bits. In addition to the well-known count-rate dependent timing jitter in avalanche photo-diode (APD), the faint laser sources, the vertical cavity surface emission lasers (VCSELs) in our system, also induce a significant amount of data-dependent timing jitter. Both the dead time and the data-dependent timing jitter are major limiting factors in designing QKD systems with sifted-key rates beyond Mbit/s.

Stabilizing unstable steady states using extended time-delay autosynchronization.

We describe a method for stabilizing unstable steady states in nonlinear dynamical systems using a form of extended time-delay autosynchronization. Specifically, stabilization is achieved by applying a feedback signal generated by high-pass-filtering in real time the dynamical state of the system to an accessible system parameter or variables. Our technique is easy to implement, does not require knowledge of the unstable steady state coordinates in phase space, automatically tracks changes in the system parameters, and is more robust to broadband noise than previous schemes. We demonstrate the controller's efficacy by stabilizing unstable steady states in an electronic circuit exhibiting low-dimensional temporal chaos. The simplicity and robustness of the scheme suggests that it is ideally suited for stabilizing unstable steady states in ultra-high-speed systems. (c) 1998 American Institute of Physics.

20 W of continuous-wave sodium D2 resonance radiation from sum-frequency generation with injection-locked lasers.

A 20-W all-solid-state continuous-wave single-frequency source tuned to the sodium D2a line at 589.159 nm has been developed for adaptive optical systems. This source is based on sum-frequency mixing two injection-locked Nd:YAG lasers in lithium triborate in a doubly resonant external cavity. Injection locking the Nd:YAG lasers not only ensures single-frequency operation but also allows the use of a single rf local oscillator for Pound-Drever-Hall locking both the injection-slave and the sum-frequency cavities. We observe power-conversion efficiencies in excess of 55% and a linearly polarized diffraction-limited output tunable across the sodium D2 line (589.156 to 589.160 nm) with no change in output power and with high amplitude and pointing stability.