RESUMO
BACKGROUND: Patient-specific simulations can provide insight into the mechanics of cardiovascular procedures. Amongst cardiovascular devices, non-compliant balloons are used in several minimally invasive procedures, such as balloon aortic valvuloplasty. Although these balloons are often included in the computer simulations of these procedures, validation of the balloon behaviour is often lacking. We therefore aim to create and validate a computational model of a valvuloplasty balloon. METHODS: A finite element (FE) model of a valvuloplasty balloon (Edwards 9350BC23) was designed, including balloon geometry and material properties from tensile testing. Young's Modulus and distensibility of different rapid prototyping (RP) rubber-like materials were evaluated to identify the most suitable compound to reproduce the mechanical properties of calcified arteries in which such balloons are likely to be employed clinically. A cylindrical, simplified implantation site was 3D printed using the selected material and the balloon was inflated inside it. The FE model of balloon inflation alone and its interaction with the cylinder were validated by comparison with experimental Pressure-Volume (P-V) and diameter-Volume (d-V) curves. RESULTS: Root mean square errors (RMSE) of pressure and diameter were RMSE P = 161.98 mmHg (3.8 % of the maximum pressure) and RMSE d = 0.12 mm (<0.5 mm, within the acquisition system resolution) for the balloon alone, and RMSE P = 94.87 mmHg (1.9 % of the maximum pressure) and RMSE d = 0.49 mm for the balloon inflated inside the simplified implantation site, respectively. CONCLUSIONS: This validated computational model could be used to virtually simulate more realistic valvuloplasty interventions.
Assuntos
Valvuloplastia com Balão/instrumentação , Análise de Elementos Finitos , Fenômenos Mecânicos , Modelagem Computacional Específica para o Paciente , Imagens de Fantasmas , Módulo de Elasticidade , Teste de Materiais , Pressão , Impressão Tridimensional , Reprodutibilidade dos Testes , Estresse Mecânico , Resistência à Tração , Fatores de TempoRESUMO
NeoChord-DS1000-System (NC) and The Harpoon-Mitral-Repair-System (H-MRS) are two trans-apical chordal implantation devices developed for the treatment of degenerative mitral valve (MV) regurgitation (DMR) either if as Fibroelastic-Deficiency (FED), Forma-Frusta (FF), or Barlow (B) presentation. The aim of this study is to evaluate some of the advantages and disadvantages of these two different devices by performing numerical simulation analyses focused on different transventricular access sites in all subsets of DMR presentations. By applying a novel approach for the development of patient-specific MV domains we worked out a set of numerical simulations of the artificial chordae implantation. Different leaflet insertions and ventricle access sites were investigated, and resulting contact-area (CA), tensioning-forces (F) and leaflet's stress (LS) were calculated. The analyses showed that: i) NC-approach maintains low LS when performed with a posterior access site and optimizes the overlap between the leaflets at the systolic peak; ii) H-MRS-system presents better results in case of a more anterior ventricular entry site; however, for FED prolapse large variation of F and LS with respect to NC-approach are found; iii) an accidental contact between artificial sutures and the anterior leaflet may occur when valve function is restored through an excessive anterior access site. Present findings set light on specific technical aspects of transapical off-pump chords implantation, either performed with NC and H-MRS systems and highlight the advantages and disadvantages proper to the two devices. Our study also paves the basis for a systematic application of computational methodology, in order to plan a patient-specific mini-invasive approach thus maximizing the outcomes.
Assuntos
Implante de Prótese de Valva Cardíaca , Insuficiência da Valva Mitral , Cordas Tendinosas/cirurgia , Implante de Prótese de Valva Cardíaca/métodos , Humanos , Valva Mitral/cirurgia , Insuficiência da Valva Mitral/cirurgia , Resultado do TratamentoRESUMO
The aim of the study was to investigate whether different head shapes show different volumetric changes following spring-assisted posterior vault expansion (SA-PVE) and to investigate the influence of surgical and morphological parameters on SA-PVE. Preoperative three-dimensional skull models from patients who underwent SA-PVE were extracted from computed tomography scans. Patient head shape was described using statistical shape modelling (SSM) and principal component analysis (PCA). Preoperative and postoperative intracranial volume (ICV) and cranial index (CI) were calculated. Surgical and morphological parameters included skull bone thickness, number of springs, duration of spring insertion and type of osteotomy. In the analysis, 31 patients were included. SA-PVE resulted in a significant ICV increase (284.1 ± 171.6 cm3, p < 0.001) and a significant CI decrease (-2.9 ± 4.3%, p < 0.001). The first principal component was significantly correlated with change in ICV (Spearman ρ = 0.68, p < 0.001). Change in ICV was significantly correlated with skull bone thickness (ρ = -0.60, p < 0.001) and age at time of surgery (ρ = -0.60, p < 0.001). No correlations were found between the change in ICV and number of springs, duration of spring insertion and type of osteotomy. SA-PVE is effective for increasing the ICV and resolving raised intracranial pressure. Younger, brachycephalic patients benefit more from surgery in terms of ICV increase. Skull bone thickness seems to be a crucial factor and should be assessed to achieve optimal ICV increase. In contrast, insertion of more than two springs, duration of spring insertion or performing a fully cut through osteotomy do not seem to impact the ICV increase. When interpreting ICV increases, normal calvarial growth should be taken into account.
Assuntos
Craniossinostoses , Hipertensão Intracraniana , Craniossinostoses/cirurgia , Cabeça , Humanos , Lactente , Crânio/diagnóstico por imagem , Crânio/cirurgia , Tomografia Computadorizada por Raios X/métodosRESUMO
The aim of this study is, firstly, to create a population-based 3D head shape model for the 0 to 2-year-old subjects to describe head shape variability within a normal population and, secondly, to test a combined normal and sagittal craniosynostosis (SAG) population model, able to provide surgical outcome assessment. 3D head shapes of patients affected by non-cranial related pathologies and of SAG patients (pre- and post-op) were extracted either from head CTs or 3D stereophotography scans, and processed. Statistical shape modelling (SSM) was used to describe shape variability using two models - a normal population model (MODEL1) and a combined normal and SAG population model (MODEL2). Head shape variability was described via principal components analysis (PCA) which calculates shape modes describing specific shape features. MODEL1 (n = 65) mode 1 showed statistical correlation (p < 0.001) with width (125.8 ± 13.6 mm), length (151.3 ± 17.4 mm) and height (112.5 ± 11.1 mm) whilst mode 2 showed correlation with cranial index (83.5 mm ± 6.3 mm, p < 0.001). The remaining 9 modes showed more subtle head shape variability. MODEL2 (n = 159) revealed that post-operative head shape still did not achieve full shape normalization with either spring cranioplasty or total calvarial remodelling. This study proves that SSM has the potential to describe detailed anatomical variations in a paediatric population.
Assuntos
Craniossinostoses , Imageamento Tridimensional , Criança , Pré-Escolar , Craniossinostoses/diagnóstico por imagem , Craniossinostoses/cirurgia , Cabeça/diagnóstico por imagem , Humanos , Lactente , Recém-Nascido , Modelos Estatísticos , Crânio/diagnóstico por imagemRESUMO
The development of accurate replicas of the circulatory and cardiac system is fundamental for a deeper understanding of cardiovascular diseases and the testing of new devices. Although numerous works concerning mock circulatory loops are present in the current state of the art, still some limitations are present. In particular, a pumping system able to reproduce the left ventricle motion and completely compatible with the magnetic resonance environment to permit the four-dimensional flow monitoring is still missing. The aim of this work was to evaluate the feasibility of an actuator suitable for cardiovascular mock circuits. Particular attention was given to the ability to mimic the left ventricle dynamics including both compression and twisting with the magnetic resonance compatibility. In our study, a left ventricle model to be actuated through vacuum was designed. The realization of the system was evaluated with finite element analysis of different design solutions. After the in silico evaluation phase, the most suitable design in terms of physiological values reproduction was fabricated through three-dimensional printing for in vitro validation. A pneumatic experimental setup was developed to evaluate the pump performances in terms of actuation, in particular ventricle radial and longitudinal displacement, twist rotation, and ejection fraction. The study demonstrated the feasibility of a custom pneumatic pump for mock circulatory loops able to reproduce the physiological ventricle movement and completely suitable for the magnetic resonance environment.
Assuntos
Coração Auxiliar , Modelos Cardiovasculares , Impressão Tridimensional , Função Ventricular Esquerda , Biomimética , Simulação por Computador , Análise de Elementos Finitos , HumanosRESUMO
Three-dimensional (3D) printing technology in congenital cardiology and cardiac surgery has experienced a rapid development over the last decade. In presence of complex cardiac and extra-cardiac anatomies, the creation of a physical, patient-specific model is attractive to most clinicians. However, at the present time, there is still a lack of strong scientific evidence of the benefit of 3D models in clinical practice and only qualitative evaluation of the models has been used to investigate their clinical use. 3D models can be printed in rigid or flexible materials, and the original size can be augmented depending on the application the models are needed for. The most common applications of 3D models at present include procedural planning of complex surgical or interventional cases, in vitro simulation for research purposes, training and communication with patients and families. The aim of this pictorial review is to describe the basic principles of this technology and present its current and future applications.
Assuntos
Procedimentos Cirúrgicos Cardíacos , Cardiopatias Congênitas/patologia , Coração/anatomia & histologia , Modelos Anatômicos , Impressão Tridimensional , Cardiologia , Cardiopatias Congênitas/cirurgia , HumanosRESUMO
OBJECTIVES: This study aimed to explore aortic morphology and the associations between morphological features and cardiovascular function in a population of patients with bicuspid aortic valve, while further assessing differences between patients with repaired coarctation, patients with unrepaired coarctation and patients without coarctation. METHODS: This is a single-centre retrospective study that included patients with available cardiovascular magnetic resonance imaging data and native bicuspid aortic valve diagnosis (n = 525). A statistical shape analysis was performed on patients with a 3-dimensional magnetic imaging resonance (MRI) dataset (n = 108), deriving 3-dimensional aortic reconstructions and computing a mean aortic shape (template) for the whole population as well as for the 3 subgroups of interest (no coarctation, repaired coarctation and unrepaired coarctation). Shape deformations (modes) were computed and correlated with demographic variables, 2-dimensional MRI measurements and volumetric and functional data. RESULTS: Overall, the results showed that patients with coarctation tended towards a more Gothic arch architecture, with decreased ascending and increased descending aorta diameters, with the unrepaired-aortic coarctation subgroup exhibiting more ascending aorta dilation. Careful assessment of patients with repaired coarctation only revealed that a more Gothic arch, increased descending aorta dimensions and ascending aorta dilation were associated with reduced ejection fraction (P ≤ 0.04), increased end-diastolic volume (P ≤ 0.04) and increased ventricular mass (P ≤ 0.02), with arch morphology distinguishing patients with and without recoarctation (P = 0.05). CONCLUSIONS: A statistical shape modelling framework was applied to a bicuspid aortic valve population revealing nuanced differences in arch morphology and demonstrating that morphological features, not immediately described by conventional measurements, can indicate those shape phenotypes associated with compromised function and thus possibly warranting closer follow-up.
Assuntos
Coartação Aórtica/patologia , Valva Aórtica/anormalidades , Doenças das Valvas Cardíacas/patologia , Adulto , Aorta/diagnóstico por imagem , Aorta/patologia , Aorta Torácica/diagnóstico por imagem , Aorta Torácica/patologia , Coartação Aórtica/diagnóstico por imagem , Valva Aórtica/diagnóstico por imagem , Valva Aórtica/patologia , Doença da Válvula Aórtica Bicúspide , Feminino , Doenças das Valvas Cardíacas/diagnóstico por imagem , Humanos , Imageamento por Ressonância Magnética , Masculino , Pessoa de Meia-Idade , Estudos RetrospectivosRESUMO
Takotsubo cardiomyopathy (TCM) is characterized by transient myocardial dysfunction, typically at the left ventricular (LV) apex. Its pathophysiology and recovery mechanisms remain unknown. We investigated LV morphology and deformation in n = 28 TCM patients. Patients with MRI within 5 days from admission ("early TCM") showed reduced LVEF and higher ventricular volumes, but no differences in ECG, global strains or myocardial oedema. Statistical shape modelling described LV size (Mode 1), apical sphericity (Mode 2) and height (Mode 3). Significant differences in Mode 1 suggest that "early TCM" LV remodeling is mainly influenced by a change in ventricular size rather than apical sphericity.
Assuntos
Modelos Cardiovasculares , Cardiomiopatia de Takotsubo/diagnóstico por imagem , Cardiomiopatia de Takotsubo/patologia , Idoso , Algoritmos , Feminino , Ventrículos do Coração/diagnóstico por imagem , Ventrículos do Coração/patologia , Humanos , Imageamento por Ressonância Magnética , Pessoa de Meia-IdadeRESUMO
The mechanics of the mitral valve (MV) are the result of the interaction of different anatomical structures complexly arranged within the left heart (LH), with the blood flow. MV structure abnormalities might cause valve regurgitation which in turn can lead to heart failure. Patient-specific computational models of the MV could provide a personalised understanding of MV mechanics, dysfunctions and possible interventions. In this study, we propose a semi-automatic pipeline for MV modelling based on the integration of state-of-the-art medical imaging, i.e. cardiac magnetic resonance (CMR) and 3D transoesophageal-echocardiogram (TOE) with fluid-structure interaction (FSI) simulations. An FSI model of a patient with MV regurgitation was implemented using the finite element (FE) method and smoothed particle hydrodynamics (SPH). Our study showed the feasibility of combining image information and computer simulations to reproduce patient-specific MV mechanics as seen on medical images, and the potential for efficient in-silico studies of MV disease, personalised treatments and device design.
Assuntos
Hemodinâmica , Insuficiência da Valva Mitral/fisiopatologia , Valva Mitral/fisiopatologia , Modelagem Computacional Específica para o Paciente , Fluxo de Trabalho , Eletrocardiografia , Análise de Elementos Finitos , Humanos , Processamento de Imagem Assistida por Computador , Imageamento por Ressonância Magnética , Masculino , Pessoa de Meia-Idade , Valva Mitral/diagnóstico por imagem , Insuficiência da Valva Mitral/diagnóstico por imagemRESUMO
Diagnosis of ventricular dysfunction in congenital heart disease is more and more based on medical imaging, which allows investigation of abnormal cardiac morphology and correlated abnormal function. Although analysis of 2D images represents the clinical standard, novel tools performing automatic processing of 3D images are becoming available, providing more detailed and comprehensive information than simple 2D morphometry. Among these, statistical shape analysis (SSA) allows a consistent and quantitative description of a population of complex shapes, as a way to detect novel biomarkers, ultimately improving diagnosis and pathology understanding. The aim of this study is to describe the implementation of a SSA method for the investigation of 3D left ventricular shape and motion patterns and to test it on a small sample of 4 congenital repaired aortic stenosis patients and 4 age-matched healthy volunteers to demonstrate its potential. The advantage of this method is the capability of analyzing subject-specific motion patterns separately from the individual morphology, visually and quantitatively, as a way to identify functional abnormalities related to both dynamics and shape. Specifically, we combined 3D, high-resolution whole heart data with 2D, temporal information provided by cine cardiovascular magnetic resonance images, and we used an SSA approach to analyze 3D motion per se. Preliminary results of this pilot study showed that using this method, some differences in end-diastolic and end-systolic ventricular shapes could be captured, but it was not possible to clearly separate the two cohorts based on shape information alone. However, further analyses on ventricular motion allowed to qualitatively identify differences between the two populations. Moreover, by describing shape and motion with a small number of principal components, this method offers a fully automated process to obtain visually intuitive and numerical information on cardiac shape and motion, which could be, once validated on a larger sample size, easily integrated into the clinical workflow. To conclude, in this preliminary work, we have implemented state-of-the-art automatic segmentation and SSA methods, and we have shown how they could improve our understanding of ventricular kinetics by visually and potentially quantitatively highlighting aspects that are usually not picked up by traditional approaches.
RESUMO
Patient-specific numerical models could aid the decision-making process for percutaneous valve selection; in order to be fully informative, they should include patient-specific data of both anatomy and mechanics of the implantation site. This information can be derived from routine clinical imaging during the cardiac cycle, but data on the implantation site mechanical response to device expansion are not routinely available. We aim to derive the implantation site response to overexpansion by monitoring pressure/dimensional changes during balloon sizing procedures and by applying a reverse engineering approach using a validated computational balloon model. This study presents the proof of concept for such computational framework tested in-vitro. A finite element (FE) model of a PTS-X405 sizing balloon (NuMed, Inc., USA) was created and validated against bench tests carried out on an ad hoc experimental apparatus: first on the balloon alone to replicate free expansion; second on the inflation of the balloon in a rapid prototyped cylinder with material deemed suitable for replicating pulmonary arteries in order to validate balloon/implantation site interaction algorithm. Finally, the balloon was inflated inside a compliant rapid prototyped patient-specific right ventricular outflow tract to test the validity of the approach. The corresponding FE simulation was set up to iteratively infer the mechanical response of the anatomical model. The test in this simplified condition confirmed the feasibility of the proposed approach and the potential for this methodology to provide patient-specific information on mechanical response of the implantation site when overexpanded, ultimately for more realistic computational simulations in patient-specific settings.