Determination of artemether and lumefantrine in anti-malarial fixed-dose combination tablets by microemulsion electrokinetic chromatography with short-end injection procedure.

BACKGROUND: Artemether-lumefantrine (AL) combination therapy is now the most used anti-malarial treatment in the world. Quality control of AL formulations is still a major challenge in developing countries. Until now, only liquid chromatographic methods have been reported in the literature for their analysis. Capillary electrophoretic methods, which present various advantages (low price of capillary, low volumes of electrolyte consumption), may be an alternative to liquid chromatography methods. In this paper, a reliable method was developed and validated for the determination of AL in commercial fixed-dose combination tablets commercialized in Côte d'Ivoire. METHODS: Artemether and lumefantrine were determined by microemulsion electrokinetic chromatography using short-end injection procedure. The two analytes were extracted from tablets by acidified methanol. Pyrimethamine was used as internal standard. Separation was carried out in an uncoated fused silica capillary, 30 cm long × 50 µm internal diameter, using an effective length of 10 cm and a microemulsion composed of octane, butanol, sodium dodecyl sulfate and borate buffer as background electrolyte, a - 500 V x cm(-1) electric field and a detection wavelength of 214 nm. RESULTS: Artemether, lumefantrine and pyrimethamine were separated in 6 min. The method was reliable with respect to selectivity towards formulation excipients, linearity of the response function (r2 > 0.998), recovery studies from synthetic tablets (in the range 99-101%), repeatability (relative standard deviation 1-3%, n = 7 analytical procedures). Application to four commercial formulations containing 20/120 mg of AL per tablet gave a content in good agreement with the declared content. However, the electropherogram of one tablet formulation showed the presence of an ingredient which was not declared. CONCLUSION: The developed MEEKC method can be proposed as an alternative method to liquid chromatography for the determination of artemether and lumefantrine in fixed-dose combination tablet formulations.

Capillary electrophoresis for the assay of fixed-dose combination tablets of artesunate and amodiaquine.

BACKGROUND: Quality control of drugs in formulations is still a major challenge in developing countries. For the quality control of artesunate and amodiaquine tablets in fixed-dose combination, only liquid chromatographic methods have been proposed in the literature. There are no capillary electrophoretic methods reported for the determination of these active substances, although this technique presents several advantages over liquid chromatography (long lifetime, low price of the capillary, low volumes of electrolyte consumption) in addition to simplicity. In this paper, a reliable capillary electrophoresis method has been developed and validated for the quality control of these drugs in commercial fixed-dose combination tablets. METHODS: Artesunate and amodiaquine hydrochloride in bilayer tablets were determined by micellar electrokinetic capillary chromatography (MEKC). Analytes were extracted from tablets by sonication with a solvent mixture phosphate buffer pH 7.0-acetonitrile containing benzoic acid as internal standard. Separation was carried out on Beckman capillary electrophoresis system equipped with fused silica capillary, 30 cm long (20 cm to detector) × 50 µm internal diameter, using a 25 mM borate buffer pH 9.2 containing 30 mM sodium dodecyl sulfate as background electrolyte, a 500 V cm(-1) electric field and a detection wavelength of 214 nm. RESULTS: Artesunate, amodiaquine and benzoic acid were separated in 6 min. The method was found to be reliable with respect to specificity,linearity of the calibration line (r(2) > 0.995), recovery from synthetic tablets (in the range 98-102%), repeatability (RSD 2-3%, n = 7 analytical procedures). Application to four batches of commercial formulations with different dosages gave content in good agreement with the declared content. CONCLUSION: The MEKC method proposed is reliable for the determination of artesunate and amodiaquine hydrochloride in fixed-dose combination tablets. The method is well-suited for drug quality control and detection of counterfeit or substandard medicines.

Influence of polyelectrolyte capillary coating conditions on protein analysis in CE.

CE of biomolecules is limited by analyte adsorption on the capillary wall. To prevent this, monolayer or successive multiple ionic-polymer layers (SMILs) of highly charged polyelectrolytes can be physically adsorbed on the inner capillary surface. Although these coatings have become commonly used in CE, no systematic investigation of their performance under different coating conditions has been carried out so far. In a previous study (Nehmé, R., Perrin, C., Cottet, H., Blanchin, M. D., Fabre, H., Electrophoresis 2008, 29, 3013-3023), we investigated the influence of different experimental parameters on coating stability, repeatability and peptide peak efficiency. Optimal coating conditions for monolayer and multilayer (SMILs) poly(diallyldimethylammonium) chloride/ poly(sodium 4-styrenesulfonate) coated capillaries were determined. In this study, the influence of polyelectrolyte concentration and ionic strength of the coating solutions, and the number of coating layers on coating stability and performance in limiting protein adsorption was carried out. EOF magnitude and repeatability were used to monitor coating stability. Coating ability to limit protein adsorption was investigated by monitoring variations of migration times, time-corrected peak areas and separation efficiency of test proteins. The separation performance of polyelectrolyte coatings were compared with those obtained with bare silica capillaries.

Capillary electrophoresis methods for the analysis of antimalarials. Part II. Achiral separative methods.

An exhaustive review of applications of achiral capillary electrophoresis methods to the analysis of antimalarials is presented. It covers quality control of formulations, analysis in biological fluids and food, determination of physico-chemical properties (pKa, partition coefficient and interaction studies). Miscellaneous applications are also considered.

Capillary electrophoresis methods for the analysis of antimalarials. Part I. Chiral separation methods.

This paper presents an overview on the current status of enantiomeric and diastereomeric separations of chiral antimalarials and derivatives by capillary electrophoresis (CE). The wide variety of chiral selectors which have been employed to resolve successfully antimalarial enantiomers: oligosaccharides (cyclodextrins, oligomaltodextrins), neutral (amylose, dextrin and dextran) and charged (chondroitin sulfate, heparin, dextran sulfate) polysaccharides and proteins are reviewed. Cyclodextrins were the most employed. Chiral additives added to the background electrolyte often facilitated separations of quinine/quinidine and cinchonine/cinchonidine diastereomers. However, in a few cases, using micellar electrokinetic capillary chromatography or non aqueous CE, resolution of diastereomers could be achieved without additives. Quantitative applications of CE to the quality control of antimalarial drugs and their analysis in biological and food matrices are presented.

Capillary zone electrophoresis as a potential technique for the simultaneous determination of sulfadoxine and pyrimethamine in tablet formulations.

A novel, simple and rapid capillary zone electrophoresis method with UV detection has been developed for the simultaneous determination of pyrimethamine and sulfadoxine in tablet formulations. The compounds are separated in 6 min in a fused silica capillary, 30 cm long (20 cm to detector)× 50 µm using a 100 mM phosphate buffer pH 7.2 as background electrolyte, a 330 V cm(-1) electric field and a detection wavelength of 214 nm. Analysis of different tablet formulations has shown a good agreement with the liquid chromatography method described in the United States Pharmacopoeia. Main advantages of the CZE method are the rapid set-up of instrumentation and capillary equilibration, short analysis time and low running cost.

Stability of capillaries coated with highly charged polyelectrolyte monolayers and multilayers under various analytical conditions--application to protein analysis.

The stability of capillaries coated with highly charged polyelectrolytes under various analytical conditions was studied, as well as their performance for the analysis of proteins by Capillary Electrophoreis (CE) over a wide range of pH (2.5-9.3). In this study, fused silica capillaries were modified either with a poly(diallyldimethylammonium) chloride (PDADMAC) monolayer or PDADMAC/poly(sodium 4-styrenesulfonate) (PSS) multilayer coatings, using optimal coating conditions previously determined. Results show that the coated capillaries are remarkably stable and efficient to limit protein adsorption under a variety of extreme electrophoretic conditions even in the absence of the coating agent in the background electrolyte which is exceptional for non-covalent coatings. Monolayer coated capillaries were demonstrated for the first time to be stable to acidic rinses and to organic solvents which proves that the stability of the capillaries is highly dependent on the coating procedure used. In addition, PDADMAC/PSS multilayer coatings were found to be stable to alkaline treatments. PDADMAC/PSS coated capillaries gave excellent performances for the analysis of proteins covering a large range of pI (4-11) and of molecular weight (14-65 kDa) over a wide pH range (i.e. 2.5-9.3). Even at high pH 9.3, protein analysis was possible with very good repeatabilities (RSD(tm)<1% and RSD(CPA)<2.6% (n ≥ 8)) and high peak efficiencies in the order of 700,000.