Compression of picosecond pulses from a thin-disk laser to 30fs at 4W average power.

We investigate two approaches for the spectral broadening and compression of 1-ps long pulses of a thin-disk laser amplifier running at 50 kHz repetition rate at 1030 nm wavelength. We find that with a single, 2.66-m long stretched flexible hollow fiber filled with xenon gas, Fourier transform limited output pulse duration of 66 fs can be directly reached. For larger pulse shortening, we applied a hybrid cascaded approach involving a BBO-based pre-compressor and a long hollow fiber. We could achieve 33-times temporal shortening of 1-ps pulses down to a duration of 30 fs at an overall efficiency of ~29% with an output power level of 3.7 W. These results demonstrate the potential of stretched flexible fibers with their free length scalability for shortening laser pulses of moderate peak power.

High-Resolution Laser Interference Ablation and Amorphization of Silicon.

The laser interference patterning of a silicon surface via UV femtosecond pulse irradiation, resulting in 350 nm periodic structures, is demonstrated. The structuring process was performed using a laser with a 450 fs pulse duration at a wavelength of 248 nm in combination with a mask projection setup. Depending on the laser fluence, single-pulse irradiation leads to amorphization, structure formation via lateral melt flow or the formation of voids via peculiar melt coalescence. Through multipulse irradiation, combined patterns of interference structures and laser-induced periodic surface structures (LIPSS) are observed.

Formation of Periodic Nanoridge Patterns by Ultrashort Single Pulse UV Laser Irradiation of Gold.

A direct comparison of simulation and experimental results of UV laser-induced surface nanostructuring of gold is presented. Theoretical simulations and experiments are performed on an identical spatial scale. The experimental results have been obtained by using a laser wavelength of 248 nm and a pulse length of 1.6 ps. A mask projection setup is applied to generate a spatially periodic intensity profile on a gold surface with a sinusoidal shape and periods of 270 nm, 350 nm, and 500 nm. The formation of structures at the surface upon single pulse irradiation is analyzed by scanning and transmission electron microscopy (SEM and TEM). For the simulations, a hybrid atomistic-continuum model capable of capturing the essential mechanisms responsible for the nanostructuring process is used to model the interaction of the laser pulse with the gold target and the subsequent time evolution of the system. The formation of narrow ridges composed of two colliding side walls is found in the simulation as well as in the experiment and the structures generated as a result of the material processing are categorized depending on the range of applied fluencies and periodicities.

Relativistic-intensity near-single-cycle light waveforms at kHz repetition rate.

The development of ultra-intense and ultra-short light sources is currently a subject of intense research driven by the discovery of novel phenomena in the realm of relativistic optics, such as the production of ultrafast energetic particle and radiation beams for applications. It has been a long-standing challenge to unite two hitherto distinct classes of light sources: those achieving relativistic intensity and those with pulse durations approaching a single light cycle. While the former class traditionally involves large-scale amplification chains, the latter class places high demand on the spatiotemporal control of the electromagnetic laser field. Here, we present a light source producing waveform-controlled 1.5-cycle pulses with a 719 nm central wavelength that can be focused to relativistic intensity at a 1 kHz repetition rate based on nonlinear post-compression in a long hollow-core fiber. The unique capabilities of this source allow us to observe the first experimental indications of light waveform effects in laser wakefield acceleration of relativistic energy electrons.