Sex-Specific Association of Clinical Parameters and Components of Femoral Bone Quality in Patients Undergoing Total Hip Arthroplasty.

Poor bone quality is a critical factor associated with an increased risk of complications after total hip arthroplasty (THA). However, no consistent recommendations have yet been established for assessing indicators of bone quality preoperatively. Thus, it remains unclear which preoperatively available and readily accessible parameters are most closely associated with femoral bone quality. Here, we obtained femoral neck specimens from 50 patients undergoing THA. Preoperative Dual-energy X-ray absorptiometry (DXA) scans, pelvic radiographs, and laboratory parameters were analyzed. In the obtained specimens, bone microstructure was assessed using micro-CT and histomorphometry. Additionally, matrix mineralization and osteocyte lacunar morphology were evaluated using quantitative backscattered electron imaging. Our analysis revealed that DXA-derived T-scores correlated with trabecular microstructure. Furthermore, radiographic indices and body mass index correlated differentially with aspects of bone quality in women and men. Contrary to previous observations, no correlation was found between serum vitamin D levels and osteoid indices, nor between clinical parameters and matrix mineralization. Age was strongly associated with the number of mineralized osteocyte lacunae, a factor that appeared to be independent of sex. Taken together, our study demonstrates that no single preoperatively available parameter exhibits a strong and consistent association with femoral bone quality. However, DXA remains a reliable preoperative measure for determining the trabecular microstructure of the femoral neck. In clinical practice, surgeons should adopt an individualized approach to preoperative assessments by considering age, sex, BMI, and radiographic indices to enhance their insight into femoral bone quality, particularly when DXA is unavailable.

Areal bone mineral density is not associated with femoral stem subsidence in patients younger than 70 years undergoing total hip arthroplasty.

INTRODUCTION: Femoral stem subsidence is a known complication after uncemented total hip arthroplasty (THA). The purpose of this study was to determine the frequency of osteoporosis and to investigate the relationship between areal bone mineral density (aBMD) and subsidence in a cohort of patients younger than 70 years. METHODS: One hundred consecutive patients (age 60 ± 6 years; 52 female, 48 male) undergoing uncemented THA using a collarless press fit femoral stem were retrospectively reviewed. Dual-energy X-ray absorptiometry (DXA) was performed preoperatively at the proximal femur and lumbar spine, and if not feasible at these sites, at the distal radius. DXA results were compared to a cohort of 100 patients ≥ 70 years scheduled for cemented THA. Age, sex, and body mass index (BMI), canal flare index (CFI), and canal fill ratio (CFR) were assessed. Analysis of stem subsidence and migration was performed on standardized, calibrated radiographs obtained postoperatively and at follow-up. RESULTS: The frequency of osteoporosis was considerably lower in the study cohort compared to patients ≥ 70 years (7% vs. 19%, p = 0.02). Illustrated by the high CFR (mean 96 ± 4%) in the mid-stem region, a sufficient press fit was achieved. After a mean follow-up of 7.4 months, the mean stem subsidence was 0.9 ± 0.9 mm. Only two patients had subsidence greater than 3 mm, one of whom was morbidly obese and the other diagnosed with severe osteoporosis. There were no correlations between any of the parameters (CFI, CFR, age, sex, BMI) and femoral stem subsidence. In addition, aBMD T-scores showed no correlations with subsidence. CONCLUSION: aBMD by DXA does not appear to be associated with stem subsidence in patients younger than 70 years and with adequate press fit.

Bi-planar calibration method for templating of hip joint arthroplasty: phantom study and proof of concept.

PURPOSE: Calibration of radiographs is a critical step in digital templating for hip arthroplasty. Calibration errors of > 1.5% lead to over- or undersizing of the templated implants and may affect logistics and patient safety. Contemporary calibration methods are known to be imprecise with average errors of 6.5% and wide variance. A novel bi-planar radiograph-based calibration method is proposed, and a phantom study was conducted as proof of concept. METHODS: A spherical external calibration marker (ECM) is placed in front of the pubic symphysis of a pelvic bone model at twelve different positions. For each marker position, standard anteroposterior radiographs and four corresponding lateral radiographs with different degrees of rotation (0°-30°) are taken (overall, 60 radiographs). Calibration factors are calculated for an internal calibration marker (ICM) at the centre of the right hip (reference) and the ECM using a novel algorithm. Rotation and marker positions simulate foreseeable use errors and misplacements and aim to test robustness of the method against these errors. RESULTS: ECM calibration factor was 125.9% (range 124.7-127.2), and the mean ICM calibration factor was 126.6% (range 126.2-127.1) ([Formula: see text]). Four images (8.3%) were beyond the 1% error threshold (all with 30° rotation). The mean difference was 0.79% (SD 0.49). CONCLUSION: The bi-planar method precisely predicts the true calibration factor of the hip joint plane under various conditions. In lateral radiographs, rotation of up to 20° did not adversely affect the precision and all images had calibration errors below the threshold for clinical significance.

Outcome of different reconstruction options using allografts in revision total hip arthroplasty for severe acetabular bone loss: a systematic review and meta-analysis.

INTRODUCTION: Several studies have reported good to excellent outcomes of revision total hip arthroplasty (rTHA) using allografts for treating severe acetabular bone defects. However, precise information on the impact of allograft type and reconstruction method is not available. MATERIAL AND METHODS: Systematic literature search was performed in Medline and Web of Science including patients with acetabular bone loss classified according to the Paprosky classification who underwent rTHA involving the use of allografts. Studies with a minimum follow-up of 2 years published between 1990 and 2021 were included. Kendall correlation was applied to determine the relationship between Paprosky grade and allograft type use. Proportion meta-analyses with 95% confidence interval (CI) were performed to summarize the success of various reconstruction options, including allograft type, fixation method, and reconstruction system. RESULTS: Twenty-seven studies met the inclusion criteria encompassing 1561 cases from 1491 patients with an average age of 64 years (range 22-95). The average follow-up period was 7.9 years (range 2-22). Structural bulk and morselized grafts were used in equal proportions for all Paprosky acetabular defect types. Their use increased significantly with the type of acetabular defect (r = 0.69, p = 0.049). The overall success rate ranged from 61.3 to 98.3% with a random effect pooled estimate of 90% [95% CI 87-93]. Trabecular metal augments (93% [76-98]) and shells (97% [84-99]) provided the highest success rates. However, no significant differences between reconstruction systems, allograft types and fixation methods were observed (p > 0.05 for all comparisons). CONCLUSION: Our findings highlight the use of bulk or morselized allograft for massive bone loss independent of Paprosky classification type and indicate similar good mid- to long-term outcomes of the different acetabular reconstruction options using allografts. CLINICAL TRIAL REGISTRATION: PROSPERO: CRD42020223093.

Dual-scale single marker calibration for digital templating of total hip arthroplasty in standing radiographs: a prospective clinical study.

PURPOSE: Accuracy of calibration of radiographs significantly influences the quality of digital templating for total hip arthroplasty (THA). The standard of care is calibration with external calibration markers (ECM). This method is associated with significant errors. Dual-scale single marker (DSSM) calibration methods may improve accuracy. The present prospective observational study is the first to analyze the application of a DSSM method in standing pelvis radiographs. METHODS: 100 patients with unilateral THA underwent antero-posterior pelvis radiographs with ECM and DSSM. The hip components were used as reference calibration factor (internal calibration factor; ICM). Absolute differences of calibration factors for ECM and DSSM from ICM were calculated. Absolute relative deviations (ARD) were calculated. Subgroup analysis for sex and WHO BMI category was performed. Furthermore, patients reported subjective comfort for each marker using a 10-point scale and choosing the preferred marker. RESULTS: Maximum magnification factor differences from the ICM were 23.3% and 9.5% and mean absolute differences were 12.5% and 2.1% for the ECM and DSSM, respectively. ARD from ICM was significantly lower for DSSM compared to ECM (p < 0.001). Absolute differences increased with BMI category using ECM; calibration by DSSM was consistent in all subgroups. Patients preferred DSSM over ECM (n = 53) or were indifferent (n = 20). Comfort was rated significantly higher for DSSM versus ECM (p < 0.001). CONCLUSION: DSSM method showed superior results in comparison to the ECM method for calibration of digital radiographs. DSSM could be used to improve digital templating in standing radiographs.

Prevalence of osteoporosis and osteopenia in elderly patients scheduled for total knee arthroplasty.

INTRODUCTION: Osteoporosis is a common comorbidity in elderly patients with osteoarthritis (OA) and may increase perioperative complications in orthopedic surgery (e.g., component migration, periprosthetic fractures). As there is no investigation of bone mineral density (BMD) in elderly patients prior to total knee arthroplasty (TKA) in Europe, we investigated this issue with a particular focus on a potential treatment gap. MATERIALS AND METHODS: We assessed the BMD by dual-energy X-ray absorptiometry (DXA) in 109 consecutive elderly patients (age ≥ 70 years) scheduled for TKA. In addition to a detailed assessment of osteoporosis and osteopenia, the influence of clinical risk factors and radiological OA severity on BMD was evaluated using group comparisons and linear regression models. In addition, we analyzed differences in BMD between patients scheduled for TKA vs. total hip arthroplasty (THA). RESULTS: Of the included 109 patients, 19 patients (17.4%) were diagnosed with osteoporosis and 50 (45.9%) with osteopenia. In the osteoporotic patients, a clinically relevant underdiagnosis concomitant with a serious treatment gap was observed in 95.0% of the patients. Body mass index, OA grade, and glucocorticoid use were identified as independent factors associated with BMD. No differences in BMD were found between the patients scheduled for TKA vs. THA. CONCLUSIONS: Considering the high prevalence of osteoporosis and osteopenia in elderly patients, DXA screening should be recommended for patients ≥ 70 years indicated for TKA.

Anterior cruciate ligament intactness in osteoarthritic patients indicated for total knee arthroplasty: a systematic literature review and meta-analysis.

Bi-cruciate retaining total knee arthroplasty (BCR TKA) is thought to result in more natural knee kinematics compared to conventional TKA designs. This may lead to a reduction in dissatisfied patients after TKA. An intact anterior cruciate ligament (ACL) is a prerequisite for implantation of a BCR TKA but the frequency of an intact ACL in patients indicated for TKA is not well known. The objective of this systematic literature review was to determine the presence of an intact ACL in patients undergoing TKA by intraoperative macroscopic or MRI assessment. A systematic literature review was conducted using PubMed™ and EMBASE™ in June 2020. The ACL of patients with knee osteoarthritis (OA) undergoing TKA was classified as present (including intact and degenerated) vs. absent, and as intact vs. not fully intact. Proportional meta-analyses were performed. 2840 articles were identified and screened. 135 full texts were analyzed and 18 studies met the inclusion criteria for subsequent qualitative and quantitative meta-analysis. Analysis of the status of the ACL when assessed intraoperatively during TKA showed that the ligament was present in 79.4% of patients (CI: 73.5-84.3%), from 14 studies with 2067 cases studied. The ACL was determined to be intact in 55.0% of patients (CI: 45.3-64.4%), from 14 studies with 1916 cases. Preoperative ACL assessment using MRI (2 studies) revealed it was present in 82.9% of 193 cases (CI: 76.9-87.6%), and intact in 56.8% of 176 cases (CI: 8.2-94.7%). This systematic literature review shows that the ACL is macroscopically intact in more than half of patients with knee OA undergoing TKA, based on intraoperative assessment of the ligament. The results suggest BCR TKA may be considered as an alternative to traditional TKA in a large number of TKA patients. More high-quality studies are needed to better understand the functional status of the ACL in TKA patients.Level of evidence III.

Intra-individual variance of bilateral femoro-tibial leg rotation: a CT study of 105 healthy subjects.

PURPOSE: In cases of suspected rotational deformity of the lower limb, in particular in post-traumatic malalignment following closed nailing, there is a lack of adequate reference values. Available publications on leg rotation have either small sample sizes or do not include bilateral or whole leg rotation of healthy legs. This study aimed to determine side-specific reference values of lower limb rotation in a large healthy sample. This may be helpful in acute clinical settings as well as for medical expert opinion. METHODS: 226 consecutive bilateral lower limb computed tomography (CT) angiographies were screened. 105 patients (210 legs) were included (40 females, 65 males, mean age 67 ± 12 years). Bilateral axial femoral and tibial rotation alignment were independently measured and overall leg rotation was computed by two methods. Distributions, sex, and side differences were analyzed. RESULTS: Two-sided paired t tests showed significant differences between right and left for all measurements. The left side showed a more pronounced mean anteversion in the femur of 2.2° (p = 0.002) and the right side higher mean external rotation in the tibia of 2.8° (p < 0.001). Overall leg rotation showed 5.1° more mean external rotation on the right side (p < 0.001) with both methods. Absolute side-to-side whole leg rotation difference was 9.5°. Absolute differences between both methods were 3.3°. The variance was high. 23 femora were retroverted, 1 tibia internally rotated, and 9 legs were overall internally rotated. No variables differed between female and male subjects except for femoral version (right p = 0.003 and left p = 0.002). Correlation coefficients were high (rho 0.550-0.934, all p < 0.001). CONCLUSION: There is a significant prevalence of side-to-side asymmetry in femoro-tibial torsion. Although side-to-side differences are not extraordinary, comparative axial femoro-tibial rotation alignment should always be interpreted with caution. LEVEL OF EVIDENCE: Diagnostic, retrospective cohort study, level III.

Bi-cruciate retaining total knee arthroplasty: a systematic literature review of clinical outcomes.

Total knee arthroplasty (TKA) has been shown to have good long-term outcomes and survivorship. Nonetheless, dissatisfied patients are frequently reported in the literature. Bi-cruciate retaining total knee prostheses (BCR TKA) were designed to address the demand for more kinematically functional implants that better reconstruct natural knee kinematics. In BCR TKA, the anterior cruciate ligament (ACL) is preserved. Improved patient-reported outcomes and satisfaction levels are expected. This review aimed to summarize indications for and clinical outcomes of BCR TKA. A systematic literature review on BCR TKA was performed. 24 articles were included for data analysis. Indications covered osteoarthritis, inflammatory arthritis and others. The degree of deformity was often but not always limited to minor axial deformity and contractures: maximum acceptable varus/valgus deformity reached 10°-30° and flexion contractures of 15°-65°. ACL intactness was macroscopically examined intraoperatively in nine studies and clinically tested in ten studies (e.g., Lachmann Test, drawer-test). Objective and patient-reported outcome scores were reported for follow-up periods of up to 22 years. Survival rates varied significantly. For first generation implants, 22-year survival reached 82% while a second generation design was associated with 13.5% revision rate at 18 months. Reasons for varying outcomes were not clear and may be attributed to the implant itself, surgical techniques and patient specific variables including changed expectations and functional demand. The literature has not shown clear indications and guidelines for the use of BCR implants. The promising results of first generation BCR TKA designs may be optimized through improved implant designs in the future. Further studies are advocated to provide the necessary evidence of second generation BCR TKA designs.

[Cost analysis of inpatient versus outpatient intravenous antibiotic treatment for periprosthetic joint infections : A simulation]. / Kostenanalyse stationärer und ambulanter intravenöser Antibiotikatherapie periprothetischer Gelenkinfektionen : Eine Simulation.

BACKGROUND: Parenteral antibiotic administration in the treatment of periprosthetic joint infections (PJI) often requires inpatient settings. This is associated with significant costs to the healthcare system. OBJECTIVE: The costs of inpatient parenteral antibiotic treatment (IPAT) and simulated costs of outpatient parenteral antibiotic treatment (OPAT) were compared in patients with PJI. Evaluations were carried out from the perspectives of cost bearers (insurances) and healthcare providers (hospitals). MATERIAL AND METHODS: The analysis and simulations were performed for all cases with the ICD-10 diagnosis T84 in the treatment year 2015. RESULTS: The simulated reduction of 159 bed-days in the 12 patients included in the study resulted in a reduction of the total costs of>18,000 € from the perspective of the health insurance. From the perspective of the hospitals the pure proceeds were improved by >22,000 €. The total costs of OPAT were >57,000 € for the health insurance. For hospitals the difference of policlinic proceeds and costs of OPAT showed a loss of >1500 €. CONCLUSION: For hospitals the OPAT is overall financially advantageous. Further advantages due to opportunity costs seem to be interesting. For cost bearers OPAT is associated with an additional financial expenditure, particularly due to costs of outpatient medication. The private sector should be considered due to the assumed additional burden as well as the assumed patient comfort.

A novel calibration method for digital templating of total hip arthroplasty: a prospective clinical study of dual scale type single marker calibration in supine radiographs.

BACKGROUND: External calibration markers (ECM) are the standard of care for digital templating in joint replacements. Spherical mono markers are known to be unreliable. Fixed calibration factors (FCF) can reduce the overall error by placement of markers, but do not address individual patient anatomy. Dual scale calibration marker (DSCM) methods were developed to improve precision of calibration but require two markers. This prospective observational study is the first to analyse the application of a dual scale type single marker (DSSM) method in supine radiographs. METHODS: One hundred patients with unilateral total hip arthroplasty (THA) underwent anterior-posterior pelvis X-ray with ECM and DSSM. The femoral THA head components were used as internal reference (ICM). An empirical fixed calibration factor (FCF; 120%) was used as comparator. Absolute differences of ICM and both ECM and DSSM were calculated. Absolute relative deviations (ARD) were calculated. RESULTS: Mean absolute calibration factor differences of ECM, FCF and DSSM from ICM were 0.105 (0.002-0.182), 0.016 (0.082-0.013) and 0.011 (0.056-0.009), respectively. ARD differences between ECM and DSSM as well as FCF and DSSM were significant (p < 0.001). CONCLUSION: The DSSM method showed superior results over ECM and FCF to predict the optimal calibration factor in supine radiographs. The novel DSSM method could be used to improve digital templating in supine radiographs without need for additional markers.

Correction to: Does increased femoral antetorsion predispose to cartilage lesions of the patellofemoral joint?

Unfortunately, the following reference was not included in the original publication of the article.

Femoral stem subsidence in cementless total hip arthroplasty: a retrospective single-centre study.

PURPOSE AND HYPOTHESIS: Subsidence is a known reason for early failure of total hip arthroplasty (THA). In particular, cementless THA might be vulnerable to migration. The present study analysed femoral stem subsidence after primary cementless THA. Prosthetic and anatomical risk factors for early femoral stem subsidence were evaluated. METHODS: Two hundred thirty-one consecutive patients who underwent primary cementless THA in a single centre were retrospectively analysed. Post-operative results were evaluated in consideration of prosthetic and anatomical properties in correlation with subsidence on standing pelvic anteroposterior radiographs. Stem type and design, demographic data, BMI, canal flare index (CFI) and canal fill ratio (CFR) were evaluated. RESULTS: The subsidence rate was significantly higher in collarless femoral stems [3.1 mm (SD 2.8 mm) vs. 1.9 mm (SD 1.5 mm); p = 0.013] while the anatomical type of the proximal femur as described by the canal flare index did not influenced subsidence (p = 0.050). Also, the canal fill ratio showed no significant correlation with subsidence at any level. CONCLUSIONS: In the present study, stem subsidence was significantly higher in the collarless group compared to collared stems. No anatomical parameter (CFI and CFR) could be identified as risk factor for subsidence. Neither age nor BMI influenced subsidence in this cohort. Still, subgroup analysis indicated a sex-dependent role of BMI. Prospective studies of large cohorts should address the problem of subsidence in the future. LEVEL OF EVIDENCE: Retrospective therapeutic study, Level IV.

Influence of calibration on digital templating of hip arthroplasty.

INTRODUCTION: Digital templating for total joint replacement is the current standard. For image calibration, external calibration markers (ECM) are used. However, there are concerns regarding the precision of the method. This study aimed to identify the direct influence of calibration errors on digital templating. PATIENTS AND METHODS: A retrospective analysis of 100 post-operative radiographs with unilateral total hip arthroplasty was performed. The magnification factor of the ECM and of the internal prosthetic femoral head (ICM) as a reference value was calculated for each radiograph. Two blinded observers performed templating of the contralateral hip using a randomized list for all radiographs and both markers. The component size templated by the ECM magnification was compared to the reference by the ICM magnification. RESULTS: Mean magnification factors of ICM and ECM differed significantly (p = 0.006). The absolute difference was 5.2% (range 0.0-23.3%, SD 4.8%). Templating of the acetabular or the femoral component showed no significant differences (p = 0.120, p = 0.599). Differences of more than one size were found in 26% of the acetabular components and 14% of the femoral components and differences over two sizes in 10% respectively 3%. Correlation coefficients for magnification error and size differences of acetabular components were - 0.645 (p < 0.001) and for the femoral component - 0.607 (p < 0.001). INTERPRETATION: The calibration error of external calibration markers in digital templating for hip replacement influences component sizes significantly. Thus, correct positioning of ECM is of utmost importance.

Dual-position calibration markers for total hip arthroplasty: theoretical comparison to fixed calibration and single marker method.

PURPOSE: Digital templating is considered a standard for total hip arthroplasty. Different means for the necessary calibration of radiographs are known. While single marker calibration with radiopaque spheres is the most common, it is associated with possible significant deviations from the true magnification of the hip. Notably, fixed magnification factors showed better results. Therefore, a dual-position calibration marker method was simulated and compared to the established methods. METHODS: First, an empirical fixed magnification factor was identified and applied to a series of radiographs. Second, three magnification factors were generated based on sagittal patient data of 398 CT scans. These methods were compared to the fixed factor. RESULTS: The fixed factor was 122.6%. In the clinical application, the error of the fixed factor was 2.5% while the error of the single marker was 5.2%. In the CT cohort, the mean reference factor was 120.5% in females and 120.3% in males. The reference factor was compared to sex-specific means, sex-specific linear functions, and sex-specific cubic functions. The best results were found for the linear regression model with a mean difference of 0.8% from the reference value. No proportional bias was found (p = 0.623). CONCLUSION: The simulation of the dual-position marker method using the linear regression model showed promising results, superior to all other methods. In future studies, its clinical application should be tested.

Operative treatment of geriatric ankle fractures with conventional or locking plates. A retrospective case-control study.

BACKGROUND: The incidence of geriatric ankle fractures continues to rise due to demographic changes. While locking plates have become standard implants for injuries of other body regions, clinical studies on their use for geriatric ankle fractures are rare. METHODS: Therefore, a retrospective case-control study, including 333 patients with a mean age of 73.5 years was performed. 263 patients underwent operative fixation with one- third tubular plates and 70 were treated with locking plates. Early outcomes and complication rates of locking plates as compared with conventional one- third tubular plates are described. RESULTS: In the present study, patients treated with locking plates were older and suffered from more severe fracture patterns. In addition, these patients had more severe comorbidities. Treatment with conventional or locking plate fixation resulted in a comparable complication and revision rate. A matched pair analysis showed significantly more complications and required revision surgeries and a trend towards more implant failures in the group that underwent conventional plating. CONCLUSIONS: Therefore, we conclude that precontoured locking plates represent an appropriate treatment option for severe ankle fractures in patients suffering from relevant co-morbidities. Prospective randomized trials are warranted to prove superiority of locking plates for treatment of geriatric ankle fractures. Level 3: Retrospective case- control study.

Standardised pre-operative diagnostics and treatment of peripheral arterial disease reduce wound complications in geriatric ankle fractures.

PURPOSE: The aim of this study was to evaluate a standardised algorithm to assess and treat impaired limb perfusion prior to surgical fixation of geriatric ankle fractures and determine the prevalence of peripheral arterial disease (PAD) in geriatric patients presenting with ankle fractures. METHODS: Eighty-four patients >65 years pre-operatively diagnosed and treated according to an algorithm (study group) were compared with 84 patients diagnosed and treated before the algorithm was introduced (control group). RESULTS: In 14 patients of the study group, clinical noninvasive examination revealed signs of relevant PAD, which was confirmed with computed tomographic angiography (CTA) in nine patients, all of whom had successful angioplasty prior to surgical fixation of the ankle fracture. In three of these patients, PAD had previously been diagnosed. After standardised diagnostics and treatment of malperfusion, a significantly reduced overall and, particularly, wound complication rate was found. CONCLUSION: PAD is an underdiagnosed condition in geriatric patients presenting with ankle fractures. This study underlines the relevance of limb perfusion for adequate wound healing in geriatric ankle fractures. Therefore, special attention should be paid to diagnose and-if indicated-optimise limb perfusion prior to surgical fixation of geriatric ankle fractures.

Biomechanical Comparison of Fixation With a Single Screw Versus Two Kirschner Wires in Distal Chevron Osteotomies of the First Metatarsal: A Cadaver Study.

Distal chevron osteotomy is a common procedure for surgical correction of hallux valgus. Osteosynthesis with 1 screw or 2 Kirschner wires has been commonly used. We compared the stability of the 2 techniques in distal chevron osteotomy. Sixteen first metatarsals from fresh-frozen human cadaver feet (9 different cadaveric specimens) were used. A standardized distal chevron osteotomy was performed. One first metatarsal from each pair was assigned to group 1 (3.5-mm cortical screw; n = 8) and one to group 2 (two 1.6-mm Kirschner wires; n = 8). Using a materials testing machine, the head of the first metatarsals was loaded in 2 different configurations (cantilever and physiologic) in succession. In the cantilever configuration, the relative stiffness of the osteosynthesis compared with intact bone was 59% ± 27% in group 1 and 68% ± 18% in group 2 (p = .50). In the physiologic configuration, it was 38% ± 25% in group 1 and 35% ± 7% in group 2 (p = .75). The failure strength in the cantilever configuration was 187 ± 105 N in group 1 and 259 ± 71 N in group 2 (p = .21). No statistically significant differences were found in stability between the 2 techniques. The use of 1 screw or 2 Kirschner wires had no significant differences in their biomechanical loading capacity for osteosynthesis in distal chevron osteotomies for treatment of hallux valgus.

Does increased femoral antetorsion predispose to cartilage lesions of the patellofemoral joint?

PURPOSE: The purpose of this study was to investigate whether there was a relationship between femoral neck antetorsion and the presence and pattern of osteoarthritis of the patellofemoral joint. It was hypothesized that an increased femoral neck antetorsion (1) correlates with osteoarthritic changes of the lateral facet of the patellofemoral joint and (2) correlates with an increased lateral trochlear height and a decreased sulcus angle. METHODS: Seventy-eight formalin-embedded cadaveric lower extremities from thirty-nine subjects with a median age of 74 years (range 60-88) were used. Surrounding soft tissues of the lower limb were removed. The femoral neck antetorsion was measured and referenced to the transepicondylar axis and the posterior condylar line. The height of the medial and lateral facet of the trochlea and the sulcus angle was measured. The location and the degree of patellofemoral cartilage degeneration were recorded. A Pearson's correlation analysis was performed to correlate the femoral neck antetorsion with the measured knee parameters. RESULTS: No significant correlation could be found between the femoral antetorsion and cartilage degeneration of the lateral patellofemoral joint (n.s.), the height of the lateral trochlea (n.s.) and the sulcus angle (n.s.). CONCLUSION: This study could not document that the femoral neck antetorsion and subsequent internal rotation of the distal femur correlated with the degree of degeneration of the lateral facet of the patellofemoral joint. Clinically, femoral internal rotation may play a minor role in the development of lateral patellofemoral joint degeneration.

The neck shaft angle: CT reference values of 800 adult hips.

OBJECTIVE: A precise understanding of the radiological anatomy and biomechanics as well as reliable reference values of the hip are essential. The primary goal of this study was to provide reference values of the neck-shaft angle (NSA) for adult patients based on the analysis of rotation corrected computed tomography (CT) scans of 800 hips. The secondary aim was to compare these measurements with simulated anteroposterior roentgenograms of the pelvis. MATERIALS AND METHODS: Pelvic CT scans of 400 patients (54.3 years, range 18-100 years; 200 female) were reconstructed in the derotated coronal plane of the proximal femur and as CT-based simulated anteroposterior roentgenograms of the pelvis in the anterior pelvic plane. Femora were categorized as coxa vara (<120°), physiologic (≥120° to <135°), and coxa valga (≥135°). Intra- and inter-rater reliability were analyzed. RESULTS: Primary research question: Mean NSA for male adults was 129.6° (range 113.2°-148.2°; SD 5.9°) and 131.9° (range 107.1°-151.9°; SD 6.8°) for females in derotated coronal reconstructions. Age (p < 0.001 in both views) and sex influenced the NSA significantly (p = 0.002 and p < 0.001); no significant differences were found between sides (p = 0.722 and p = 0.955). Overall, an excellent reliability of repeated measurements of one or two observers was found (ICC 0.891-0.995). Secondary research question: NSA values measured in the simulated anteroposterior roentgenogram and the rotation corrected coronal reconstruction differed significantly (p < 0.001). CONCLUSIONS: While anteroposterior pelvis radiographs are susceptible to rotational errors, the coronal reconstruction of the proximal femur in the femoral neck plane allows the correct measurement of the NSA.