Vanadium-Containing Keggin-Type Polyoxometalates, [VM12O40]3- and [VVM11O40]4- (M = Mo, W): Structural Characterization and Voltammetric, NMR, and EPR Studies Related to Electrochemical Reduction at Framework and Central Vanadium Sites.

Vanadium is accommodated in both the framework (VoutV) and central positions (VinV) in the Keggin-type polyoxometalates (POMs) [VinVVoutVM11O40]4- (M = Mo, W; VinVVoutVM11) and in the central position in [VinVM12O40]3- (VinVM12). The structures of the VinVVoutVM11 class have been determined by X-ray crystallography and compared to those of VinVM12 reported previously. A major feature of interest with POMs is their capacity for very extensive reduction, particularly when protonation accompanies the electron transfer step. With VinVVoutVM11 and VinVM12 POMs, knowledge as to whether reduction occurs at V or M sites and the concomitant dependence on acidity has been obtained. Frozen solution EPR spectra obtained following bulk electrolysis showed that the one-electron reduction of VinVMo12 occurs at the molybdenum framework site to give VinVMoVMo11. In contrast, EPR spectra of one-electron reduced VinVW12 at <30 K are consistent with the electron being accommodated on the central V atom in a tetrahedral environment to give VinIVW12. In the case of VinVVoutVM11, the initial reduction occurs at the framework VoutV site to give VinVVoutIVM11. The second electron is delocalized over the Mo framework in two-electron reduced VinVVoutIVMoVMo10, whereas it is accommodated on the central V site in VinIVVoutIVW11. The distance between VinIV and VoutIV in VinIVVoutIVW11 estimated as 3.5 ± 0.2 Å from analysis of the EPR spectrum is consistent with that obtained in VinVVoutVW11 from crystallographic data. Simulations of the cyclic voltammograms as a function of CF3SO3H acid concentration for the initial reduction processes provide excellent agreement with experimental data obtained in acetonitrile (0.10 M [n-Bu4N][PF6]) and allowed acid association constants to be estimated and compared with the literature values available for [XVoutVM11O40]n- (X = S (n = 3), P and As (n= 4); M = Mo, W). The interpretation of the voltammetric data is supported by 51V NMR measurements on the oxidized VV forms of the POMs.

Advanced Spatiotemporal Voltammetric Techniques for Kinetic Analysis and Active Site Determination in the Electrochemical Reduction of CO2.

ConspectusElectrochemical reduction of the greenhouse gas CO2 offers prospects for the sustainable generation of fuels and industrially useful chemicals when powered by renewable electricity. However, this electrochemical process requires the use of highly stable, selective, and active catalysts. The development of such catalysts should be based on a detailed kinetic and mechanistic understanding of the electrochemical CO2 reduction reaction (eCO2RR), ideally through the resolution of active catalytic sites in both time (i.e., temporally) and space (i.e., spatially). In this Account, we highlight two advanced spatiotemporal voltammetric techniques for electrocatalytic studies and describe the considerable insights they provide on the eCO2RR. First, Fourier transformed large-amplitude alternating current voltammetry (FT ac voltammetry), as applied by the Monash Electrochemistry Group, enables the resolution of rapid underlying electron-transfer processes in complex reactions, free from competing processes, such as the background double-layer charging current, slow catalytic reactions, and solvent/electrolyte electrolysis, which often mask conventional voltammetric measurements of the eCO2RR. Crucially, FT ac voltammetry allows details of the catalytically active sites or the rate-determining step to be revealed under catalytic turnover conditions. This is well illustrated in investigations of the eCO2RR catalyzed by Bi where formate is the main product. Second, developments in scanning electrochemical cell microscopy (SECCM) by the Warwick Electrochemistry and Interfaces Group provide powerful methods for obtaining high-resolution activity maps and potentiodynamic movies of the heterogeneous surface of a catalyst. For example, by coupling SECCM data with colocated microscopy from electron backscatter diffraction (EBSD) or atomic force microscopy, it is possible to develop compelling correlations of (precatalyst) structure-activity at the nanoscale level. This correlative electrochemical multimicroscopy strategy allows the catalytically more active region of a catalyst, such as the edge plane of two-dimensional materials and the grain boundaries between facets in a polycrystalline metal, to be highlighted. The attributes of SECCM-EBSD are well-illustrated by detailed studies of the eCO2RR on polycrystalline gold, where carbon monoxide is the main product. Comparing SECCM maps and movies with EBSD images of the same region reveals unambiguously that the eCO2RR is enhanced at surface-terminating dislocations, which accumulate at grain boundaries and slip bands. Both FT ac voltammetry and SECCM techniques greatly enhance our understanding of the eCO2RR, significantly boosting the electrochemical toolbox and the information available for the development and testing of theoretical models and rational catalyst design. In the future, it may be possible to further enhance insights provided by both techniques through their integration with in situ and in operando spectroscopy and microscopy methods.

Revisiting the TCNQF4 0/1-/2- Catalysis Mechanism for the [Fe(CN)6 ]3-/4- -S2 O3 2- /S4 O6 2- Redox Reaction.

Published data suggest that sparingly soluble metal complexes of TCNQF n 1 - ${{\rm{TCNQF}}_{\rm{n}}^{{\rm{1 - }}} }$ , where n=0, 1, 2, 4, can act as heterogeneous catalysts for the kinetically very slow [ Fe ( CN ) 6 ]​ 3 - / 4 - ${{\rm{[Fe(CN)}}_{\rm{6}} {\rm{]}}^{{\rm{3 - /4 - }}} }$ - S 2 O 3 2 - ${{\rm{S}}_{\rm{2}} {\rm{O}}_{\rm{3}}^{{\rm{2 - }}} }$ / S 4 O 6 2 - ${{\rm{S}}_{\rm{4}} {\rm{O}}_{\rm{6}}^{{\rm{2 - }}} }$ reaction in aqueous solution. This study shows that the coordination polymer CuTCNQF 4 ${{\rm{CuTCNQF}}_{\rm{4}} }$ , participates as a homogeneous catalyst via an extremely small concentration of dissolved TCNQF 4 1 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{1 - }}} }$ . This finding suggests that the generally accepted mechanism of catalysis by TCNQF 4 ${{\rm{TCNQF}}_{\rm{4}} }$ based solids needs to be revisited to ascertain the role of homogeneous pathways. In the present study, UV-visible spectrophotometry was used to examine the catalysis of the aqueous redox reaction of [ Fe ( CN ) 6 ]​ 3 - ${{\rm{[Fe(CN)}}_{\rm{6}} {\rm{]}}^{{\rm{3 - }}} }$ (1.0 mM) with S 2 O 3 2 - ${{\rm{S}}_{\rm{2}} {\rm{O}}_{\rm{3}}^{{\rm{2 - }}} }$ (100 mM) in the presence of (i) a precursor catalyst, TCNQF 4 0 ${{\rm{TCNQF}}_{\rm{4}}^{\rm{0}} }$ ; (ii) the catalyst, TCNQF 4 1 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{1 - }}} }$ , as the water soluble Li+ salt; and (iii) CuTCNQF 4 ${{\rm{CuTCNQF}}_{\rm{4}} }$ . A homogeneous reaction scheme that utilises the TCNQF 4 1 - / 2 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{1 - /2 - }}} }$ couple is provided. In the case of TCNQF 4 1 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{1 - }}} }$ derived from highly soluble LiTCNQF 4 ${{\rm{LiTCNQF}}_{\rm{4}} }$ , quantitative conversion of 1.0 mM S 2 O 3 2 - ${{\rm{S}}_{\rm{2}} {\rm{O}}_{\rm{3}}^{{\rm{2 - }}} }$ to 0.50 mM S 4 O 6 2 - ${{\rm{S}}_{\rm{4}} {\rm{O}}_{\rm{6}}^{{\rm{2 - }}} }$ occurs with complete reduction of [ Fe ( CN ) 6 ]​ 3 - ${{\rm{[Fe(CN)}}_{\rm{6}} {\rm{]}}^{{\rm{3 - }}} }$ to [ Fe ( CN ) 6 ]​ 4 - ${{\rm{[Fe(CN)}}_{\rm{6}} {\rm{]}}^{{\rm{4 - }}} }$ being rapidly accelerated by sub-micomolar concentrations of TCNQF 4 1 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{1 - }}} }$ . TCNQF 4 2 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{2 - }}} }$ generated in the catalytic cycle, reacts with [ Fe ( CN ) 6 ]​ 3 - ${{\rm{[Fe(CN)}}_{\rm{6}} {\rm{]}}^{{\rm{3 - }}} }$ to reform TCNQF 4 1 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{1 - }}} }$ and produce [ Fe ( CN ) 6 ]​ 4 - ${{\rm{[Fe(CN)}}_{\rm{6}} {\rm{]}}^{{\rm{4 - }}} }$ . Along with the rapid catalytic reaction, the sluggish competing reaction between TCNQF 4 1 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{1 - }}} }$ and S 2 O 3 2 - ${{\rm{S}}_{\rm{2}} {\rm{O}}_{\rm{3}}^{{\rm{2 - }}} }$ occurs to give TCNQF 4 2 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{2 - }}} }$ , which is protonated to HTCNQF 4 1 - ${{\rm{\;HTCNQF}}_{\rm{4}}^{{\rm{1 - }}} }$ , along with a trace amount of S 4 O 6 2 - ${{\rm{S}}_{\rm{4}} {\rm{O}}_{\rm{6}}^{{\rm{2 - }}} }$ . On addition of the precursor catalyst, TCNQF 4 0 ${{\rm{TCNQF}}_{\rm{4}}^{\rm{0}} }$ , rapid reduction with S 2 O 3 2 - ${{\rm{S}}_{\rm{2}} {\rm{O}}_{\rm{3}}^{{\rm{2 - }}} }$ occurs to form TCNQF 4 1 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{1 - }}} }$ - the active catalyst. CuTCNQF 4 ${{\rm{CuTCNQF}}_{\rm{4}} }$ added to water is shown to be sufficiently soluble to provide adequate TCNQF 4 1 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{1 - }}} }$ to act as the catalyst for the [ Fe ( CN ) 6 ]​ 3 - / 4 - ${{\rm{[Fe(CN)}}_{\rm{6}} {\rm{]}}^{{\rm{3 - /4 - }}} }$ - S 2 O 3 2 - ${{\rm{S}}_{\rm{2}} {\rm{O}}_{\rm{3}}^{{\rm{2 - }}} }$ / S 4 O 6 2 - ${{\rm{S}}_{\rm{4}} {\rm{O}}_{\rm{6}}^{{\rm{2 - }}} }$ reaction.

Fluorine Substitution of TCNQ Alters the Redox-Driven Catalytic Pathway for the Ferricyanide-Thiosulfate Reaction.

Mechanistic variation in catalysis through substituent-based redox tuning is well established. Fluorination of TCNQ (TCNQ=tetracyanoquinodimethane) provides ~850 mV variation in the redox potentials of the TCNQF n 0 / 1 - ${{{\rm {TCNQF}}}_{{\rm {n}}}^{{\rm {0/1-}}}}$ and TCNQF n 1 - / 2 - ${{{\rm {TCNQF}}}_{{\rm {n}}}^{{\rm {1-/2-}}}}$ (n=0, 2, 4) processes. With TCNQF 4 1 - ${{{\rm {TCNQF}}}_{{\rm {4}}}^{{\rm {1-}}}}$ , catalysis of the kinetically very slow ferrocyanide-thiosulfate redox reaction in aqueous solution occurs via a mechanism in which the catalyst TCNQF 4 1 - ${{{\rm {TCNQF}}}_{{\rm {4}}}^{{\rm {1-}}}}$ is reduced to TCNQF 4 2 - ${{{\rm {TCNQF}}}_{{\rm {4}}}^{{\rm {2-}}}}$ when reacting with S 2 O 3 2 - ${{{\rm {S}}}_{{\rm {2}}}{{\rm {O}}}_{{\rm {3}}}^{{\rm {2-}}}}$ which is oxidised to S 4 O 6 2 - ${{{\rm {S}}}_{{\rm {4}}}{{\rm {O}}}_{{\rm {6}}}^{{\rm {2-}}}}$ . Subsequently, TCNQF 4 2 - ${{{\rm {TCNQF}}}_{{\rm {4}}}^{{\rm {2-}}}}$ reacts with [ Fe ( CN ) 6 ]​ 3 - ${{{\rm {[Fe(CN)}}}_{{\rm {6}}}{{\rm {]}}}^{{\rm {3-}}}}$ to form [ Fe ( CN ) 6 ]​ 4 - ${{{\rm {[Fe(CN)}}}_{{\rm {6}}}{{\rm {]}}}^{{\rm {4-}}}}$ and reform the TCNQF 4 1 - ${{{\rm {TCNQF}}}_{{\rm {4}}}^{{\rm {1-}}}}$ catalyst, in another thermodynamically favoured process. An analogous mechanism applies with TCNQF 2 1 - ${{{\rm {TCNQF}}}_{{\rm {2}}}^{{\rm {1-}}}}$ as a catalyst. In contrast, since the reaction of S 2 O 3 2 - ${{{\rm {S}}}_{{\rm {2}}}{{\rm {O}}}_{{\rm {3}}}^{{\rm {2-}}}}$ with TCNQ 1 - ${{{\rm {TCNQ}}}^{{\rm {1-}}}}$ is thermodynamically unfavourable, an alternative mechanism is required to explain the catalytic activity observed in this non-fluorinated system. Here, upon addition of TCNQ 1 - ${{{\rm {TCNQ}}}^{{\rm {1-}}}}$ , reduction of [ Fe ( CN ) 6 ]​ 3 - ${{{\rm {[Fe(CN)}}}_{{\rm {6}}}{{\rm {]}}}^{{\rm {3-}}}}$ to [ Fe ( CN ) 6 ]​ 4 - ${{{\rm {[Fe(CN)}}}_{{\rm {6}}}{{\rm {]}}}^{{\rm {4-}}}}$ occurs with concomitant oxidation of TCNQ 1 - ${{{\rm {TCNQ}}}^{{\rm {1-}}}}$ to TCNQ 0 ${{{\rm {TCNQ}}}^{{\rm {0}}}}$ , which then acts as the catalyst for S 2 O 3 2 - ${{{\rm {S}}}_{{\rm {2}}}{{\rm {O}}}_{{\rm {3}}}^{{\rm {2-}}}}$ oxidation. Thermodynamic data explain the observed differences in the catalytic mechanisms. CuTCNQF n ${{{\rm {CuTCNQF}}}_{{\rm {n}}}}$ (n=0, 4) also act as catalysts for the ferricyanide-thiosulfate reaction in aqueous solution. The present study shows that homogeneous pathways are available following addition of these dissolved materials. Previously, these CuTCNQF n ${{{\rm {CuTCNQF}}}_{{\rm {n}}}}$ (n=0, 4) coordination polymers have been regarded as insoluble in water and proposed as heterogeneous catalysts for the ferricyanide-thiosulfate reaction. Details and mechanistic differences were established using UV-visible spectrophotometry and cyclic voltammetry.

Revisiting the TCNQF 4 0 / 1 - / 2 - ${{\bf TCNQF}_{\bf 4}

The front cover artwork was done by Michelle Farrelly, a member of the Martin group at Monash University. The image represents a perspective of a cuvette in which the catalysis of the thiosulfate-ferricyanide reaction was achieved by a TCNQF4 -based redox reaction in aqueous solution. The primary method used to monitor these reactions was spectrophotometry. Read the full text of the Research Article at 10.1002/cphc.202200942.

Oxidation of the Platinum(II) Anticancer Agent [Pt{(p-BrC6F4)NCH2CH2NEt2}Cl(py)] to Platinum(IV) Complexes by Hydrogen Peroxide.

PtIV coordination complexes are of interest as prodrugs of PtII anticancer agents, as they can avoid deactivation pathways owing to their inert nature. Here, we report the oxidation of the antitumor agent [PtII(p-BrC6F4)NCH2CH2NEt2}Cl(py)], 1 (py = pyridine) to dihydroxidoplatinum(IV) solvate complexes [PtIV{(p-BrC6F4)NCH2CH2NEt2}Cl(OH)2(py)].H2O, 2·H2O with hydrogen peroxide (H2O2) at room temperature. To optimize the yield, 1 was oxidized in the presence of added lithium chloride with H2O2 in a 1:2 ratio of Pt: H2O2, in CH2Cl2 producing complex 2·H2O in higher yields in both gold and red forms. Despite the color difference, red and yellow 2·H2O have the same structure as determined by single-crystal and X-ray powder diffraction, namely, an octahedral ligand array with a chelating organoamide, pyridine and chloride ligands in the equatorial plane, and axial hydroxido ligands. When tetrabutylammonium chloride was used as a chloride source, in CH2Cl2, another solvate, [PtIV{(p-BrC6F4)NCH2CH2NEt2}Cl(OH)2(py)].0.5CH2Cl2,3·0.5CH2Cl2, was obtained. These PtIV compounds show reductive dehydration into PtII [Pt{(p-BrC6F4)NCH=CHNEt2}Cl(py)], 1H over time in the solid state, as determined by X-ray powder diffraction, and in solution, as determined by 1H and 19F NMR spectroscopy and mass spectrometry. 1H contains an oxidized coordinating ligand and was previously obtained by oxidation of 1 under more vigorous conditions. Experimental data suggest that oxidation of the ligand is favored in the presence of excess H2O2 and elevated temperatures. In contrast, a smaller amount (1Pt:2H2O2) of H2O2 at room temperature favors the oxidation of the metal and yields platinum(IV) complexes.

Inclusion of multiple cycling of potential in the deep neural network classification of voltammetric reaction mechanisms.

The use of deep neural networks (DNNs) for the classification of electrochemical mechanisms using simulated voltammograms with one cycle of potential for training has previously been reported. In this paper, it is shown how valuable additional patterns for mechanism distinction become available when a new DNN is trained simultaneously on images obtained from three cycles of potential using tensor inputs. Significant improvements, relative to the single cycle training, in achieving the correct classification of E, EC1st and EC2nd mechanisms (E = electron transfer step and C1st and C2nd are first and second order follow up chemical reactions, respectively) are demonstrated with noisy simulated data for conditions where all mechanisms are close to chemically reversible and hence difficult to distinguish, even by an experienced electrochemist. Challenges anticipated in applying the new DNN to the classification of experimental data are highlighted. Directions for future development are also discussed.

Hydrophobicity Graded Gas Diffusion Layer for Stable Electrochemical Reduction of CO2.

To mitigate flooding associated with the gas diffusion layer (GDL) during electroreduction of CO2 , we report a hydrophobicity-graded hydrophobic GDL (HGGDL). Coating uniformly dispersed polytetrafluoroethylene (PTFE) binders on the carbon fiber skeleton of a hydrophilic GDL uniformizes the hydrophobicity of the GDL and also alleviates the gas blockage of pore channels. Further adherence of the PTFE macroporous layer (PMPL) to one side of the hydrophobic carbon fiber skeleton was aided by sintering. The introduced PMPL shows an appropriate pore size and enhanced hydrophobicity. As a result, the HGGDL offers spatial control of the hydrophobicity and hence water and gas transport over the GDL. Using a nickel-single-atom catalyst, the resulting HGGDL electrode provided a CO faradaic efficiency of over 83 % at a constant current density of 75 mA cm-2 for 103 h operation in a membrane electrode assembly, which is more than 16 times that achieved with a commercial GDL.

Using Purely Sinusoidal Voltammetry for Rapid Inference of Surface-Confined Electrochemical Reaction Parameters.

Alternating current (AC) voltammetric techniques are experimentally powerful as they enable Faradaic current to be isolated from non-Faradaic contributions. Finding the best global fit between experimental voltammetric data and simulations based on reaction models requires searching a substantial parameter space at high resolution. In this paper, we estimate parameters from purely sinusoidal voltammetry (PSV) experiments, investigating the redox reactions of a surface-confined ferrocene derivative. The advantage of PSV is that a complete experiment can be simulated relatively rapidly, compared to other AC voltammetric techniques. In one example involving thermodynamic dispersion, a PSV parameter inference effort requiring 7,500,000 simulations was completed in 7 h, whereas the same process for our previously used technique, ramped Fourier transform AC voltammetry (ramped FTACV), would have taken 4 days. Using both synthetic and experimental data with a surface confined diazonium substituted ferrocene derivative, it is shown that the PSV technique can be used to recover the key chemical and physical parameters. By applying techniques from Bayesian inference and Markov chain Monte Carlo methods, the confidence, distribution, and degree of correlation of the recovered parameters was visualized and quantified.

Electron Delocalization in Spectroelectrochemically and Computationally Characterized [Pt{(p-BrC6F4)NCH═C(Cl)NEt2}Cl(py)]+ Formed by Electrochemical Oxidation of [PtII{(p-BrC6F4)NCH═C(Cl)NEt2}Cl(py)].

[Pt{(p-BrC6F4)NCH═C(Cl)NEt2}Cl(py)] (1Cl) is the product of the hydrogen peroxide oxidation of the PtII anticancer agent [Pt{(p-BrC6F4)NCH2CH2NEt2}Cl(py)] (1). Insights into electron delocalization and bonding in [Pt{(p-BrC6F4)NCH═C(Cl)NEt2}Cl(py)]+ (1Cl+) obtained by electrochemical oxidation of 1Cl have been gained by spectroscopic and computational studies. The 1Cl/1Cl+ process is chemically and electrochemically reversible on the short time scale of voltammetry in dichloromethane (0.10 M [Bu4N][PF6]). Substantial stability is retained on longer time scales enabling a high yield of 1Cl+ to be generated by bulk electrolysis. In situ IR and visible spectroelectrochemical studies on the oxidation of 1Cl to 1Cl+ and the reduction of 1Cl+ back to 1Cl confirm the long-term chemical reversibility. DFT calculations indicate only a minor contribution to the electron density (13%) resides on the Pt metal center in 1Cl+, indicating that the 1Cl/1Cl+ oxidation process is extensively ligand-based. Published X-ray crystallographic data show that 1Cl is present in only one structural form, while NMR data on the dissolved crystals revealed the presence of two closely related structural forms in an almost equimolar ratio. Solution-phase EPR spectra of 1Cl+ are consistent with two closely related structural forms in a ratio of about 90:10. The average g value for the frozen solution spectra (2.0567 for the major species) is significantly greater than the 2.0023 expected for a free radical. Crystal field analysis of the EPR spectra leads to an estimate of the 5d(xz) character of around 10% in 1Cl+. Analysis of X-ray absorption fine structure derived from 1Cl+ also supports the presence of a delocalized singly occupied metal molecular orbital with a spin density of approximately 17% on Pt. Accordingly, the considerably larger electron density distribution on the ligand framework (diminished PtIII character) is proposed to contribute to the increased stability of 1Cl+ compared to that of 1+.

Impact of the Lithium Cation on the Voltammetry and Spectroscopy of [XVM11O40]n- (X = P, As (n = 4), S (n = 3); M = Mo, W): Influence of Charge and Addenda and Hetero Atoms.

Polyoxometalates (POMs) have been proposed as electromaterials for lithium-based batteries because they provide access to multiple electron transfer reactions coupled to fast lithium ion transport processes and high stability over many redox cycles. Consequently, knowledge of reversible potentials and Li+ cation-POM anion interactions provides a strategic basis for their further development. In this study, detailed cyclic voltammetric studies of a series of [XVVM11O40]n- (XVM11n-) POMs (where X (heteroatom) = P (n = 4), As (n = 4), and S (n = 3) and M (addenda atom) = Mo, W) have been undertaken in CH3CN in the presence of LiClO4, with n-Bu4NPF6 also present when required to keep the ionic strength close to constant value of 0.1 M. An analysis of the data has allowed the impact of the POM charge, and addenda and hetero atoms on the reversible potentials and the interaction between Li+ and the oxidized XVVM11n- and reduced XVIVM11(n+1)- forms of the VV/IV redox couple to be determined. The SVV/IVM113-/4- process is independent of the Li+ concentration, implying the absence of the association of this cation with either SVVM113- or SVIVM114- redox levels. However, lithium-ion association constants for both VV and VIV redox levels were obtained from a comparison of simulated and experimental cyclic voltammograms for the reduction of the more negatively charged XVVM114- (X = P, As; M = Mo, W), since the Li+ interaction with these more negatively charged POMs is much stronger. The interaction between Li+ and the oxidized, XVVM11n-, and reduced, XVIVM11(n+1)-, forms was also investigated by 51V NMR and EPR spectroscopy, respectively, and it was confirmed that, due to their lower charge density, SVVM113- and SVIVM114- interact significantly less strongly with the lithium ion than XVVM114- and XVIVM115- (X = P, As). The lithium-POM association constants are substantially smaller than the corresponding proton association constants reported previously, which is attributed to a smaller surface charge density. The much stronger impact of Li+ on the WVI/V- and MoVI/V-based reductions that occur at more negative potentials than the VV/IV process also has been qualitatively evaluated.

Automatically Identifying Electrode Reaction Mechanisms Using Deep Neural Networks.

At present, electrochemical mechanisms are most commonly identified subjectively based on the experience of the researcher. This subjectivity is reflected in bias to particular mechanisms as well as lack of quantifiable confidence in the chosen mechanism compared to potential alternative mechanisms. In this paper we demonstrate that a deep neural network trained to recognize dc cyclic voltammograms for three commonly encountered mechanisms provides correct classifications within 5 ms without the problem of subjectivity. To mimic experimental data, the impact of noise, uncompensated resistance, and dependence on scan rate, factors that are relevant to practical studies, has also been investigated. Outcomes with two experimental data sets are also presented.

Application of Bayesian Inference in Fourier-Transformed Alternating Current Voltammetry for Electrode Kinetic Mechanism Distinction.

Estimation of parameters of interest in dynamic electrochemical (voltammetric) studies is usually undertaken via heuristic or data optimization comparison of the experimental results with theory based on a model chosen to mimic the experiment. Typically, only single point parameter values are obtained via either of these strategies without error estimates. In this article, Bayesian inference is introduced to Fourier-transformed alternating current voltammetry (FTACV) data analysis to distinguish electrode kinetic mechanisms (reversible or quasi-reversible, Butler-Volmer or Marcus-Hush models) and quantify the errors. Comparisons between experimental and simulated data were conducted across all harmonics using public domain freeware (MECSim).

Separating the Effects of Experimental Noise from Inherent System Variability in Voltammetry: The [Fe(CN)6]3-/4- Process.

Recently, we introduced the use of techniques drawn from Bayesian statistics to recover kinetic and thermodynamic parameters from voltammetric data and were able to show that the technique of large amplitude ac voltammetry yielded significantly more accurate parameter values than the equivalent dc approach. In this paper, we build on this work to show that this approach allows us, for the first time, to separate the effects of random experimental noise and inherent system variability in voltammetric experiments. We analyze ten repeated experimental data sets for the [Fe(CN)6]3-/4- process, again using large-amplitude ac cyclic voltammetry. In each of the ten cases, we obtain an extremely good fit to the experimental data and obtain very narrow distributions of the recovered parameters governing both the faradaic (the reversible formal potential, E0, the standard heterogeneous charge transfer rate constant, k0, and the charge transfer coefficient, α) and nonfaradaic terms (uncompensated resistance, Ru, and double layer capacitance, Cdl). We then employ hierarchical Bayesian methods to recover the underlying "hyperdistribution" of the faradaic and nonfaradaic parameters, showing that in general the variation between the experimental data sets is significantly greater than suggested by individual experiments, except for α where the interexperiment variation was relatively minor. Correlations between pairs of parameters are provided, and for example, reveal a weak link between k0 and Cdl (surface activity of a glassy carbon electrode surface). Finally, we discuss the implications of our findings for voltammetric experiments more generally.

Microcavity-Supported Lipid Bilayers; Evaluation of Drug-Lipid Membrane Interactions by Electrochemical Impedance and Fluorescence Correlation Spectroscopy.

Many drugs have intracellular or membrane-associated targets, thus understanding their interaction with the cell membrane is of value in drug development. Cell-free tools used to predict membrane interactions should replicate the molecular organization of the membrane. Microcavity array-supported lipid bilayer (MSLB) platforms are versatile biophysical models of the cell membrane that combine liposome-like membrane fluidity with stability and addressability. We used an MSLB herein to interrogate drug-membrane interactions across seven drugs from different classes, including nonsteroidal anti-inflammatories: ibuprofen (Ibu) and diclofenac (Dic); antibiotics: rifampicin (Rif), levofloxacin (Levo), and pefloxacin (Pef); and bisphosphonates: alendronate (Ale) and clodronate (Clo). Fluorescence lifetime correlation spectroscopy (FLCS) and electrochemical impedance spectroscopy (EIS) were used to evaluate the impact of drug on 1,2-dioleyl- sn-glycerophosphocholine and binary bilayers over physiologically relevant drug concentrations. Although FLCS data revealed Ibu, Levo, Pef, Ale, and Clo had no impact on lipid lateral mobility, EIS, which is more sensitive to membrane structural change, indicated modest but significant decreases to membrane resistivity consistent with adsorption but weak penetration of drugs at the membrane. Ale and Clo, evaluated at pH 5.25, did not impact the impedance of the membrane except at concentrations exceeding 4 mM. Conversely, Dic and Rif dramatically altered bilayer fluidity, suggesting their translocation through the bilayer, and EIS data showed that resistivity of the membrane decreased substantially with increasing drug concentration. Capacitance changes to the bilayer in most cases were insignificant. Using a Langmuir-Freundlich model to fit the EIS data, we propose Rsat as an empirical value that reflects permeation. Overall, the data indicate that Ibu, Levo, and Pef adsorb at the interface of the lipid membrane but Dic and Rif interact strongly, permeating the membrane core modifying the water/ion permeability of the bilayer structure. These observations are discussed in the context of previously reported data on drug permeability and log P.

Unprecedented Formation of a Binuclear Au(II)-Au(II) Complex through Redox State Cycling: Electrochemical Interconversion of Au(I)-Au(I), Au(II)-Au(II), and Au(I)-Au(III) in Binuclear Complexes Containing the Carbanionic Ligand C6F4PPh2.

The rational design of binuclear Au(I)-Au(I), Au(II)-Au(II), and Au(I)-Au(III) complexes requires an understanding of how the redox states interconvert. Herein, the electrochemical interconversion of the three oxidation states I, II, and III is reported on the voltammetric (cyclic and rotating disk electrode) time scales for binuclear gold complexes containing C6F4PPh2 as a ligand, to demonstrate for the first time formation of a binuclear Au(II)-Au(II) from a Au(I)-Au(III) complex. Results are supported by bulk electrolysis and coulometry with reaction products being identified by 31P NMR and UV-vis spectroscopy. All electrochemical processes involve an overall two-electron charge-transfer process with no one-electron intermediate being detected. Importantly, the kinetically rather than thermodynamically favored isomer [Au2IIX2(µ-2-C6F4PPh2)2] is formed on redox cycling of [XAuI(µ-2-C6F4PPh2)(κ2-2-C6F4PPh2)AuIIIX] (X = Cl, ONO2). Finally, a mechanism is proposed to explain the simultaneous change of coordination of the chelating carbanionic ligand to bridging mode and interconversion of oxidation states in binuclear gold complexes.

Identification of a new substrate effect that enhances the electrocatalytic activity of dendritic tin in CO2 reduction.

In this study, a selective Sn based catalytic system that electrochemically reduces CO2 to formate has been developed based on a new substrate effect. Dendritic Sn catalysts were synthesised by hydrogen gas bubble assisted electrodeposition on Pt, Cu, Sn or In substrates and applied to electrocatalytic reduction of CO2. The four substrates exhibit a hydrogen evolution activity that follows the order Pt > Cu > Sn > In. However, the Cu supported dendritic Sn catalyst provides the best selectivity towards formate formation (67.3% at -0.95 V vs. RHE). A substrate induced local pH change is proposed as the origin of formate selectivity. This was confirmed by the bulk electrolysis results obtained from two electrolyte solutions with different buffer capacities. The high buffer capacity phosphate buffer electrolyte solution provides minimal local pH change while an electrolyte with a low buffer capacity such as NaHCO3 maximises this effect to enhance the selectivity towards formate. The strategy reported here does not only focus on the catalyst, but also takes into consideration the local chemical environment. Hence, this work provides an optimal approach to improving the catalytic performance of electrocatalysts for electrochemical CO2 reduction.

Electrochemical evidence that pyranopterin redox chemistry controls the catalysis of YedY, a mononuclear Mo enzyme.

A long-standing contradiction in the field of mononuclear Mo enzyme research is that small-molecule chemistry on active-site mimic compounds predicts ligand participation in the electron transfer reactions, but biochemical measurements only suggest metal-centered catalytic electron transfer. With the simultaneous measurement of substrate turnover and reversible electron transfer that is provided by Fourier-transformed alternating-current voltammetry, we show that Escherichia coli YedY is a mononuclear Mo enzyme that reconciles this conflict. In YedY, addition of three protons and three electrons to the well-characterized "as-isolated" Mo(V) oxidation state is needed to initiate the catalytic reduction of either dimethyl sulfoxide or trimethylamine N-oxide. Based on comparison with earlier studies and our UV-vis redox titration data, we assign the reversible one-proton and one-electron reduction process centered around +174 mV vs. standard hydrogen electrode at pH 7 to a Mo(V)-to-Mo(IV) conversion but ascribe the two-proton and two-electron transition occurring at negative potential to the organic pyranopterin ligand system. We predict that a dihydro-to-tetrahydro transition is needed to generate the catalytically active state of the enzyme. This is a previously unidentified mechanism, suggested by the structural simplicity of YedY, a protein in which Mo is the only metal site.

Controllable Synthesis of Few-Layer Bismuth Subcarbonate by Electrochemical Exfoliation for Enhanced CO2 Reduction Performance.

Two-dimensional (2D) engineering of materials has been recently explored to enhance the performance of electrocatalysts by reducing their dimensionality and introducing more catalytically active ones. In this work, controllable synthesis of few-layer bismuth subcarbonate nanosheets has been achieved via an electrochemical exfoliation method. These nanosheets catalyse CO2 reduction to formate with high faradaic efficiency and high current density at a low overpotential owing to the 2D structure and co-existence of bismuth subcarbonate and bismuth metal under catalytic turnover conditions. Two underlying fast electron transfer processes revealed by Fourier-transformed alternating current voltammetry (FTacV) are attributed to CO2 reduction at bismuth subcarbonate and bismuth metal. FTacV results also suggest that protonation of CO2.- is the rate determining step for bismuth catalysed CO2 reduction.

Retuning the Catalytic Bias and Overpotential of a [NiFe]-Hydrogenase via a Single Amino Acid Exchange at the Electron Entry/Exit Site.

The redox chemistry of the electron entry/exit site in Escherichia coli hydrogenase-1 is shown to play a vital role in tuning biocatalysis. Inspired by nature, we generate a HyaA-R193L variant to disrupt a proposed Arg-His cation-π interaction in the secondary coordination sphere of the outermost, "distal", iron-sulfur cluster. This rewires the enzyme, enhancing the relative rate of H2 production and the thermodynamic efficiency of H2 oxidation catalysis. On the basis of Fourier transformed alternating current voltammetry measurements, we relate these changes in catalysis to a shift in the distal [Fe4S4]2+/1+ redox potential, a previously experimentally inaccessible parameter. Thus, metalloenzyme chemistry is shown to be tuned by the second coordination sphere of an electron transfer site distant from the catalytic center.