RESUMO
In this work, three novel magnetic metal-ceramic nanocomposites were obtained by thermally treating Fe-exchanged zeolites (either A or X) under reducing atmosphere at relatively mild temperatures (750-800 °C). The so-obtained materials were thoroughly characterized from the point of view of their physico-chemical properties and, then, used as magnetic adsorbents in the separation of the target gene factors V and RNASE and of the Staphylococcus aureus bacteria DNA from human blood. Such results were compared with those obtained by using a top ranking commercial separation system (namely, SiMAG-N-DNA by Chemicell). The results obtained by using the novel magnetic adsorbents were similar to (or even better than) those obtained by using the commercial system, both during manual and automated separations, provided that a proper protocol was adopted. Particularly, the novel magnetic adsorbents showed high sensitivity during tests performed with small volumes of blood. Finally, the feasible production of such magnetic adsorbents by an industrial process was envisaged as well.
Assuntos
Biomarcadores/análise , Biomarcadores/sangue , Fracionamento Químico/métodos , Nanopartículas Magnéticas de Óxido de Ferro/química , Nanocompostos/química , Zeolitas/química , Fenômenos Químicos , Humanos , Temperatura , Difração de Raios XRESUMO
The current state of the art in the application of variable-temperature IR (VTIR) spectroscopy to the study of (i) adsorption sites in zeolites, including dual cation sites; (ii) the structure of adsorption complexes and (iii) gas-solid interaction energy is reviewed. The main focus is placed on the potential use of zeolites for gas separation, purification and transport, but possible extension to the field of heterogeneous catalysis is also envisaged. A critical comparison with classical IR spectroscopy and adsorption calorimetry shows that the main merits of VTIR spectroscopy are (i) its ability to provide simultaneously the spectroscopic signature of the adsorption complex and the standard enthalpy change involved in the adsorption process; and (ii) the enhanced potential of VTIR to be site specific in favorable cases.
Assuntos
Gases/química , Zeolitas/química , Adsorção , Modelos Moleculares , Estrutura Molecular , Porosidade , Propriedades de Superfície , Temperatura , TermodinâmicaRESUMO
The hydrothermal synthesis of a nanosized cobalt doped aluminum phosphate CoAPO-5 (CoAPO-5-N) in a water-surfactant-organic solvent mixture (emulsion method) is reported, along with its physico-chemical characterization and comparison with a sample obtained by conventional synthesis (CoAPO-5-C). Both XRD (X-ray Diffraction) peak widths and FESEM (Field Emission Scanning Electron Microscopy) pictures of CoAPO-5-N are in agreement with a nanoscale structure, although the aggregation of nanoparticles occurred. EDX analysis shows a more homogeneous distribution of cobalt in CoAPO-5-N, not attainable by conventional synthesis. The specific surface area, as measured by nitrogen adsorption at 77 K, shows a limited increase in CoAPO-5-N (242 m(2) g(-1)) with respect to CoAPO-5-C (216 m(2) g(-1)), whereas the external surface area is almost tripled. Such a definite increase in the outer surface of CoAPO-5-N is also evidenced by the fourfold increase in the rate of a reaction only involving the exterior surface of particles, the light-driven oxidation of water by persulfate anions, as activated by the bulky Ru(bipy)3(2+) complex, unable to enter CoAPO-5 micropores. Two new features were also noted, adding to the knowledge of CoAPO-5 systems: (i) tetrahedral Co(3+) species may coordinate ammonia molecules, assuming an octahedral configuration, as determined by UV-vis spectroscopy; (ii) Co(2+) species in trigonal coordination occur, able to coordinate either CO molecules at a low temperature or ammonia (or water) at room temperature, as evidenced by IR and UV-vis spectroscopy, respectively.
RESUMO
The simple means adopted for investigating H-Y zeolite acidity in water is the pH-dependence of the amount of a basic molecule adsorbed under isochoric conditions, a technique capable of yielding, under equilibrium conditions, an estimate of the pKa value of the involved acidic centres: the behaviour with temperature of adsorbed amounts yields instead some information on thermodynamics. Simazine (Sim, 2-chloro-4,6-bis(ethylamino)-s-triazine) was chosen as an adsorbate because its transverse dimension (7.5 Å) is close to the opening of the supercage in the faujasite structure of H-Y (7.4 Å). In short term measurements, Sim adsorption at 25 °C occurs only at the outer surface of H-Y particles. Two types of mildly acidic centres are present (with pKaca. 7 and ca. 8, respectively) and no strong one is observed. Previous adsorption of ammonia from the gas phase discriminates between the two. The former survives, and shows features common with the silanols of amorphous silica. The latter is suppressed: because of this and other features distinguishing this site from silanol species (e.g. the formation of dimeric Sim2H(+) species, favoured by coverage and unfavoured by temperatures of adsorption higher than ambient temperature) a candidate is an Al based site. We propose a Lewis centre coordinating a water molecule, exhibiting acidic properties. This acidic water molecule can be replaced by the stronger base ammonia, also depleting inner strong Brønsted sites. A mechanism for the generation of the two sites from surface Brønsted species is proposed. Long term adsorption measurements at 25 °C already show the onset of the interaction with inner strongly acidic Brønsted sites: because of its size, activation is required for Sim to pass the supercage openings and reach inner acidic sites. When adsorption is run at 40-50 °C, uptake is much larger and increases with temperature. Isochoric measurements suggest a pKa value of ca. 3 compatible with its marked acidic nature, although attainment of equilibrium conditions is questionable. Measurements at 60 °C (both isochors and DRIFT) show the onset of changes at the outer surface brought about by the presence of hot water. Control experiments run with USY (Ultra Stabilized zeolite Y), featuring wormholes and cavities rendering accessible internal sites, show the extensive involvement of internal Brønsted sites already at 25 °C.
Assuntos
Ácidos/química , Zeolitas/química , Adsorção , Concentração de Íons de Hidrogênio , Simazina/química , Propriedades de Superfície , Temperatura , TermodinâmicaRESUMO
High-aspect-ratio nanomaterials (HARN) (typically, single-walled carbon nanotubes (SWCNT) or multiwalled carbon nanotubes (MWCNT)) impair airway barrier function and are toxic to macrophages. Here, we assess the biological effects of nanotubes of imogolite (INT), a hydrated alumino-silicate [(OH)3Al2O3SiOH] occurring as single-walled NT, on murine macrophages and human airway epithelial cells. Cell viability was assessed with resazurin. RT-PCR was used to study the expression of Nos2 and Arg1, markers of classical or alternative macrophage activation, respectively, and nitrite concentration in the medium was determined to assess NO production. Epithelial barrier integrity was evaluated from the trans-epithelial electrical resistance (TEER). Potential genotoxicity of INT was assessed with comet and cytokinesis-block micronucleus cytome assays. Compared to MWCNT and SWCNT, INT caused much smaller effects on RAW264.7 and MH-S macrophage viability. The incubation of macrophages with INT at doses as high as 120 µg/cm(2) for 72 h did not alter either Nos2 or Arg1 expression nor did it increase NO production, whereas IL6 was induced in RAW264.7 cells but not in MH-S cells. INT did not show any genotoxic effect in RAW264.7 and A549 cells except for a decrease in DNA integrity observed in epithelial A549 cells after treatment with the highest dose (80 µg/cm(2)). No significant change in permeability was recorded in Calu-3 epithelial cell monolayers exposed to INT, whereas comparable doses of both SWCNT and MWCNT lowered TEER. Thus, in spite of their fibrous nature, INT appear not to be markedly toxic for in vitro models of lung-blood barrier cells.
Assuntos
Silicatos de Alumínio/toxicidade , Nanotubos/toxicidade , Silicatos de Alumínio/química , Animais , Linhagem Celular , Linhagem Celular Tumoral , Sobrevivência Celular/efeitos dos fármacos , Ensaio Cometa , Formiatos/química , Radicais Livres/química , Humanos , Peróxido de Hidrogênio/química , Camundongos , Testes para Micronúcleos , Nanotubos/química , Nanotubos de Carbono/toxicidade , Óxido Nítrico/metabolismoRESUMO
Outer Co(II) species in Co-ZIF-67 coordinate molecular oxygen both from the gas phase and liquid water, through an adsorption process (presumably yielding in both cases surface superoxo species), respectively weak and reversible (gas phase), and strong and irreversible (liquid); in the latter case desorption is however brought about by illumination with solar light comprising the UV component.
RESUMO
Samples of the activated microporous aluminophosphate Co-APO-5, featuring ca. 20% of Co(3+) cations, when immersed in water evolve molecular oxygen at room temperature in an endothermic process, without the need for either light or a sacrificial reactant. Successive drying of the sample at temperatures around 520 K releases molecular hydrogen, with recovery of the initial conditions. Several hydration-dehydration cycles may be performed without loss of activity, i.e. water is split in a thermal cycle under relatively mild conditions.
Assuntos
Compostos de Alumínio/química , Cobalto/química , Água/química , Óxido de Alumínio/química , Catálise , Fosfatos/química , Porosidade , TemperaturaRESUMO
The textile wastewater sludge (TWS) treatment and disposal are environmentally challenging due to toxic organics and metals. At the same time, cattle manure (CM), with better combustion performance, i.e., calorific value and uniform burning capability, is still underutilized in many parts of the world. This study evaluated and assessed the TWS and CM blending compatibility to convert them into fuel pellets for the direct combustion option and to stabilize toxic contaminants in TWS. After initial drying, grinding, and particle size control of the raw TWS and CM, both were blended at different ratios. The blended and nonblended TWS and CM samples were converted into pellets and analyzed for proximate and ultimate analyses, namely, moisture content, fixed carbon, CHNO, gross calorific value (GCV), bulk density, ash content, and metals, to evaluate the efficacy for energy applications. Out of three blended ratios, i.e., 75:25 (W/W%; CM/TWS), 50:50, and 25:75, the 75:25 blended pellet composition was found appropriate for fuel application. For the 75:25 blend, the obtained GCV was 12.77 MJ/kg, elemental carbon was 27.5%, volatiles were 41.7%, and residue ash was 42.8% of the total weight. Moreover, the blending ratios of 75:25 and 50:50 revealed that elemental and metal (Fe, Cu, Zn, Ni, Cr, Na, Mg, Mn) concentrations in TWS were stabilized to below threshold limits in the obtained residue ash for safe handling. The explored methods of TWS and CM waste processing, blending, and pelletization proposed a new technique for their sustainable waste valorization into energy sources.
RESUMO
An IR spectroscopy study is reported on the nature and accessibility of external and internal surfaces of single-walled alumino-silicate nanotubes (NTs) of the imogolite type. NTs form bundles with hexagonal symmetry, in which three kinds of surfaces may be figured out: surface A is the inner surface of NTs; surface B is that between three aligned NTs in the hexagonal packing; and surface C arises from slit mesopores between bundles. Two materials were considered: proper imogolite (IMO, (OH)3Al2O3SiOH) and its methylated analogue, (Me-IMO, (OH)3Al2O3SiCH3). The chemical nature of the outer surface of NTs is the same in both materials, i.e. a curved gibbsite sheet with both Al-OH-Al and Al-O-Al groups and an amphoteric character. The inner surface is very hydrophilic in IMO NTs, lined by closely packed silanols, and hydrophobic in Me-IMO, all silanols being replaced by -SiCH3 groups. The change in chemical composition is accompanied by an increment in pore size, about 1.0 nm in IMO, and ca. 2.0 nm in Me-IMO, which implies a change in the accessibility of the B surface, not available to any molecule in IMO, and accessible in Me-IMO to small molecules like water, due to larger pores between NTs. Aluminol species at the B surface display an acidic nature, in contrast with that of the same species at surface C, because of a confinement effect.
Assuntos
Alumínio/química , Nanotubos/química , Silicatos/química , Propriedades de SuperfícieRESUMO
A reverse-micelle sol-gel method was chosen for the preparation of Fe-doped TiO2 samples that were employed in the photodegradation of the crystal violet dye under visible light irradiation in a batch reactor. The dopant amount was varied to assess the optimal photocatalyst composition towards the target dye degradation. The photocatalysts were characterized through a multi-technique approach, envisaging XRPD and QPA as obtained by Rietveld refinement, FE-SEM analysis, DR UV-vis spectroscopy, N2 adsorption/desorption isotherms measurement at -196 °C, ζ-potential measurement, and XPS analysis. The physical-chemical characterization showed that the adopted synthesis method allows obtaining NPs with uniform shape and size and promotes the introduction of Fe into the titania matrix, finally affecting the relative amounts of the three occurring polymorphs of TiO2 (anatase, rutile and brookite). By increasing the Fe content, the band gap energy decreases from 3.13 eV (with undoped TiO2) to 2.65 eV (with both 2.5 and 3.5 wt.% nominal Fe contents). At higher Fe content, surface Fe oxo-hydroxide species occur, as shown by DR UV-vis and XP spectroscopies. All the Fe-doped TiO2 photocatalysts were active in the degradation and mineralization of the target dye, showing a TOC removal higher than the undoped sample. The photoactivity under visible light was ascribed both to the band-gap reduction (as confirmed by phenol photodegradation) and to dye sensitization of the photocatalyst surface (as confirmed by photocatalytic tests carried out using different visible-emission spectra LEDs). The main reactive species involved in the dye degradation were determined to be positive holes.
RESUMO
Three hematite samples were synthesized by precipitation from a FeCl3 solution under controlled pH and temperature conditions in different morphology and dimensions: (i) microsized (average diameter 1.2 µm); (ii) submicrosized (250 nm); and (iii) nanosized (90 nm). To gain insight into reactions potentially occurring in vivo at the particle-lung interface following dust inhalation, several physicochemical features relevant to pathogenicity were measured (free radical generation in cell-free tests, metal release, and antioxidant depletion), and cellular toxicity assays on human lung epithelial cells (A549) and murine alveolar macrophages (MH-S) were carried out (LDH release, apoptosis detection, DNA damage, and nitric oxide synthesis). The decrease in particles size, from 1.2 µm to 90 nm, only caused a slight increase in structural defects (disorder of the hematite phase and the presence of surface ferrous ions) without enhancing surface reactivity or cellular responses in the concentration range between 20 and 100 µg cm⻲.
Assuntos
Apoptose/efeitos dos fármacos , Células Epiteliais/efeitos dos fármacos , Compostos Férricos/toxicidade , L-Lactato Desidrogenase/metabolismo , Macrófagos Alveolares/efeitos dos fármacos , Nanopartículas Metálicas/toxicidade , Óxido Nítrico/metabolismo , Animais , Linhagem Celular , Ensaio Cometa , Dano ao DNA/efeitos dos fármacos , Células Epiteliais/metabolismo , Compostos Férricos/química , Humanos , Concentração de Íons de Hidrogênio , Macrófagos Alveolares/citologia , Macrófagos Alveolares/metabolismo , Nanopartículas Metálicas/química , Nanopartículas Metálicas/ultraestrutura , Camundongos , Tamanho da Partícula , TemperaturaRESUMO
Imogolite-like nanotubes have been synthesised in which SiCH(3) groups have been introduced in place of the SiOH groups that naturally occur at the inner surface of imogolite, an alumino-silicate with formula (OH)(3)Al(2)O(3)SiOH, forming nanotubes with inner and outer diameter of 1.0 and 2.0 nm, respectively. The new nanotubular material, composition (OH)(3)Al(2)O(3)SiCH(3), has both larger pores and higher specific surface area than unmodified imogolite: it forms as hollow cylinders 3.0 nm wide and several microns long, with a specific surface area of ca. 800 m(2) g(-1) and intriguing surface properties, due to hydrophobic groups inside the nanotubes and hydrophilic Al(OH)Al groups at their outer surface. Adsorption of methane at 30 °C has been studied in the pressure range between 5 and 35 bar on both the new material and unmodified imogolite: it resulted that the new material adsorption capacity is about 2.5 times larger than that of imogolite, in agreement with both its larger pore volume and the presence of a methylated surface. On account of these properties and of its novelty, the studied material has several potential technical applications, e.g. in the fields of gas chromatography and gas separation.
RESUMO
Six Mo/TiO2 samples (with 0, 1.0, 2.5, 5.0, 7.5, and 10 wt % Mo nominal contents) were obtained by reverse micelle sol-gel synthesis, followed by calcination at 500 °C. The samples were characterized by means of powder X-ray Diffraction (PXRD), quantitative phase analysis as obtained by Rietveld refinement, field-emission scanning electron microscopy (FE-SEM) coupled with energy-dispersive X-ray analysis, N2 adsorption/desorption at -196 °C, X-ray photoelectron spectroscopy, and diffuse reflectance (DR) UV-vis spectroscopy. As a whole, the adopted characterization techniques showed the inclusion of a sizeable Mo amount, without the segregation of any MoO x phase. Specifically, PXRD showed the occurrence of anatase and brookite with all the studied samples; notwithstanding the mild calcination temperature, the formation of rutile occurred at Mo wt % ≥2.5 likely due to the presence of brookite favoring, in turn, anatase to rutile transition. DR UV-vis and XP spectroscopies allowed determining the samples' band gap energy (E g) and valence band energy, respectively, from which the conduction band energy was calculated; and the observed E g value increase at 10 wt % Mo was ascribed to the Moss-Burstein effect.
RESUMO
MnO x -TiO2 catalysts (0, 1, 5, and 10 wt % Mn nominal content) for NH3-SCR (selective catalytic reduction) of NO x have been synthesized by the reverse micelle-assisted sol-gel procedure, with the aim of improving the dispersion of the active phase, usually poor when obtained by other synthesis methods (e.g., impregnation) and thereby lowering its amount. For comparison, a sample at nominal 10 wt % Mn was obtained by impregnation of the (undoped) TiO2 sample. The catalysts were characterized by using an integrated multitechnique approach, encompassing X-ray diffraction followed by Rietveld refinement, micro-Raman spectroscopy, N2 isotherm measurement at -196 °C, energy-dispersive X-ray analysis, diffuse reflectance UV-vis spectroscopy, temperature-programmed reduction technique, and X-ray photoelectron spectroscopy. The obtained results prove that the reverse micelle sol-gel approach allowed for enhancing the catalytic activity, in that the catalysts were active in a broad temperature range at a substantially low Mn loading, as compared to the impregnated catalyst. Particularly, the 5 wt % Mn catalyst showed the best NH3-SCR activity in terms of both NO x conversion (ca. 90%) and the amount of produced N2O (ca. 50 ppm) in the 200-250 °C temperature range.
RESUMO
Fe-doped titania photocatalysts (with 1, 2.5, and 3.5 wt. % Fe nominal content), showing photocatalytic activity under visible light, were prepared by a soft-template assisted sol-gel approach in the presence of the triblock copolymer Pluronic P123. An undoped TiO2 photocatalyst was also prepared for comparison. The photocatalysts were characterized by means of X-ray powder Diffraction (XRPD), Quantitative Phase Analysis as obtained by Rietveld refinement, Diffuse Reflectance (DR) UV-Vis spectroscopy, N2 adsorption/desorption at -196 °C, electrophoretic mobility in water (ζ-potential), and X-ray photoelectron spectroscopy (XPS). The physico-chemical characterization showed that all the samples were 100% anatase phase and that iron was present both in the bulk and at the surface of the Fe-doped TiO2. Indeed, the band gap energy (Eg) decreases with the Fe content, with Tauc's plot determined values ranging from 3.35 (undoped TiO2) to 2.70 eV (3.5 wt. % Fe). Notwithstanding the obtained Eg values, the photocatalytic activity results under visible light highlighted that the optimal Fe content was equal to 2.5 wt. % (Tauc's plot determined Eg = 2.74 eV). With the optimized photocatalyst and in selected operating conditions, under visible light it was possible to achieve 90% AO7 discoloration together with a TOC removal of 40% after 180 min. The kinetic behavior of the photocatalyst was also analyzed. Moreover, the tests in the presence of three different scavengers revealed that the main reactive species are (positive) holes and superoxide species. Finally, the optimized photocatalyst was also able to degrade phenol under visible light.
RESUMO
Benzo(a)pyrene (B(a)P) is a well-known genotoxic agent, the removal of which from environmental matrices is mandatory, necessitating the application of cleaning strategies that are harmless to human and environmental health. The potential application of nanoparticles (NPs) in the remediation of polluted environments is of increasing interest. Here, specifically designed NPs were selected as being non-genotoxic and able to interact with B(a)P, in order to address the genetic and chromosomal damage it produces. A newly formulated pure anatase nano-titanium (nano-TiO2), a commercial mixture of rutile and anatase, and carbon black-derived hydrophilic NPs (HNP) were applied. Once it had been ascertained that the NPs selected for the work did not induce genotoxicity, marine mussel gill biopsies were exposed in vitro to B(a)P (2 µg/mL), alone and in combination with the selected NPs (50 µg/mL nano-TiO2, 10 µg/mL HNP). DNA primary reversible damage was evaluated by means of the Comet assay. Chromosomal persistent damage was assessed on the basis of micronuclei frequency and nuclear abnormalities by means of the Micronucleus-Cytome assay. Transmission Electron Microscopy (TEM) was performed to investigate the mechanism of action exerted by NPs. Pure Anatase n-TiO2 was found to be the most suitable for our purpose, as it is cyto- and genotoxicity free and able to reduce the genetic and chromosomal damage associated with exposure to B(a)P.
RESUMO
Interaction of gaseous ammonia with a NH(4)-ZSM-5 zeolite (Si/Al=11.5) was studied by means of infrared (IR) spectroscopy both at constant ambient temperature and in the temperature range 373-573 K. H-bonding of NH(3) molecules to the NH(4) (+) species takes place. The interaction is weak and reversible, resembling a solvation process. Spectral evidence shows that only one N--H moiety is actually available, indicating that ammonium ions are tricoordinated to the zeolite inner surface. H-bonded NH(3) has an absorption band at 1712 cm(-1), which grows with increasing pressure in two steps: a monosolvated ammonium species is initially formed, evolving to a disolvated species for pressures above 5 mbar. Coordination of the second NH(3) molecule takes place at the already coordinated NH(3) molecule and not at the ammonium cation. From the changes in intensity of the 1712 cm(-1) band with changing temperature under a moderate NH(3) equilibrium pressure, the calculated standard enthalpy and entropy of the monosolvation reaction were ΔH(0)=-34(±5) kJ mol(-1) and ΔS(0)=-88(±10) J mol(-1) K(-1), respectively. The enthalpy of the second solvation step was calculated from the corresponding equilibrium constant under the assumption of (nearly) the same entropy change for both solvation processes. In agreement with the overall picture, this enthalpy change is small (-15 kJ mol(-1) at the most). Since in a previous work (M. Armandi, B. Bonelli, I. Bottero, C. O. Areán, E. Garrone, J. Phys. Chem. C 2010, 114, 6658) the thermodynamic features of the reaction between bare Brønsted acid sites and NH(3) yielding NH(4) (+) species were determined, the data reported herein allow the study of the coexistence of different species in the NH(3)/H-ZSM-5 zeolite system: 1) unreacted acid Brønsted sites, 2) bare ammonium ions, and 3) variously solvated ammonium species. The relevant description is particularly simple when the overall average coverage is one molecule per site.
RESUMO
Detailed analysis of recently reported variable-temperature IR (VTIR) spectra of carbon monoxide adsorbed in alkaline zeolites shows how, not only the corresponding values of standard adsorption enthalpy ( ΔH0 ) and entropy ( ΔS0 ) can be obtained, but also the thermodynamic values of molar entropy and enthalpy which characterize the adsorbed gas phase. In addition, it is shown that the so obtained molar entropy data can lead to new insights into soft molecular modes, which would be hardly accessible by conventional IR spectroscopic techniques.
RESUMO
Microwaves (MW) are often the most efficient, in terms of heat exchange and conversion rate, of all the energy sources used to promote chemical reactions thanks to fast volumetric dielectric heating, and metal-catalyzed synthetic reactions under heterogeneous conditions are an eloquent example. We herein report a MW-assisted green protocol for the C-H arylation of thiophenes with substituted aryl halides. This sustainable protocol carried out in γ-valerolactone (GVL) is catalyzed by Pd nanoparticles embedded in cross-linked ß-cyclodextrin. In view of the excellent results achieved with activated substrates, the one-pot synthesis of a 4(3H)-quinazolinone derivative has been accomplished. A pressure-resistant MW reactor, equipped with multiple gas inlets, was used for sequential (i) C-H arylation, (ii) reduction, and (iii) carbonylation in the presence of the same catalyst, but under different gas atmospheres. The robust heterogeneous Pd catalyst showed limited metal leaching in GVL, making this an efficient MW-assisted process with high atom economy.
RESUMO
Different sol-gel synthesis methods were used to obtain four nanostructured mesoporous TiO2 samples for an efficient photocatalytic degradation of the emerging contaminant N-phenylurea under either simulated solar light (1 Sun) or UV light. Particularly, two TiO2 samples were obtained by means of as many template-assisted syntheses, whereas other two TiO2 samples were obtained by a greener template-free procedure, implying acidic conditions and, then, calcination at either 200 °C or 600 °C. In one case, anatase was obtained, whereas in the other three cases mixed crystalline phases were obtained. The four TiO2 samples were characterized by X-ray powder diffraction (followed by Rietveld analysis); Transmission Electron Microscopy; N2 adsorption/desorption at -196 °C; Diffuse Reflectance UV/Vis spectroscopy and ζ-potential measurements. A commercial TiO2 powder (i. e., Degussa P25) was used for comparison. Differences among the synthesized samples were observed not only in their quantitative phase composition, but also in their nanoparticles morphology (shape and size), specific surface area, pore size distribution and pHIEP (pH at isoelectric point), whereas the samples band-gap did not vary sizably. The samples showed different photocatalytic behavior in terms of N-phenylurea degradation, which are ascribed to their different physico-chemical properties and, especially, to their phase composition, stemming from the different synthesis conditions.