RESUMO
Efficiently pumping fluids without moving parts in extremely miniaturized formats is challenging. Here, we propose and numerically explore a new type of fluid pump in which a series of electrodes driven at different phases produce a force directly on the molecules of the fluid. This effect is based on traveling-wave dielectrophoresis (twDEP), which has been observed to drive the motion of colloidal particles. Here, we leverage the time needed for fluid molecules with permanent dipoles to align with the applied field to maintain a phase lag between the applied field and the molecular polarization. While requiring operation in the GHz range, this effect is predicted to be efficient due to its ability to directly drive bulk fluid motion. We begin by establishing the foundational equations for this effect and performing finite element simulations to determine its magnitude in a model geometry. By combining theory and a systematic series of calculations, we validate that twDEP pumps should exhibit a fluid flow that scales as the voltage squared divided by the electrode period and that it should increase with the complex permittivity of the fluid and decrease with increasing viscosity. This results in a general equation that predicts the performance of twDEP pumps. Collectively, these computations provide a blueprint for producing twDEP pumps of polar fluids such as water and ethanol. We conclude by noting that the growing interest in high power microwave technology along with metasurfaces to locally tailor phase could provide a path to realizing twDEP pumps in practice.
Assuntos
Eletroforese , Eletroforese/métodos , Fenômenos Físicos , Movimento (Física) , EletrodosRESUMO
Abstract: The burgeoning field of materials informatics necessitates a focus on educating the next generation of materials scientists in the concepts of data science, artificial intelligence (AI), and machine learning (ML). In addition to incorporating these topics in undergraduate and graduate curricula, regular hands-on workshops present the most effective medium to initiate researchers to informatics and have them start applying the best AI/ML tools to their own research. With the help of the Materials Research Society (MRS), members of the MRS AI Staging Committee, and a dedicated team of instructors, we successfully conducted workshops covering the essential concepts of AI/ML as applied to materials data, at both the Spring and Fall Meetings in 2022, with plans to make this a regular feature in future meetings. In this article, we discuss the importance of materials informatics education via the lens of these workshops, including details such as learning and implementing specific algorithms, the crucial nuts and bolts of ML, and using competitions to increase interest and participation.
RESUMO
The ability to precisely pattern nanoscale amounts of liquids is essential for biotechnology and high-throughput chemistry, but controlling fluid flow on these scales is very challenging. Scanning probe lithography methods such as dip-pen nanolithography (DPN) provide a mechanism to write fluids at the nanoscale, but this is an open loop process as methods to provide feedback while patterning sub-pg features have yet to be reported. Here, we demonstrate a novel method for programmably nanopatterning liquid features at the fg-scale through a combination of ultrafast atomic force microscopy probes, the use of spherical tips, and inertial mass sensing. We begin by investigating the required probe properties that would provide sufficient mass responsivity to detect fg-scale mass changes and find ultrafast probes to be capable of this resolution. Further, we attach a spherical bead to the tip of an ultrafast probe as we hypothesize that the spherical tip could hold a drop at its apex which both facilitates interpretation of inertial sensing and maintains a consistent fluid environment for reliable patterning. We experimentally find that sphere-tipped ultrafast probes are capable of reliably patterning hundreds of features in a single experiment. Analyzing the changes in the vibrational resonance frequency during the patterning process, we find that drift in the resonance frequency complicates analysis, but that it can be removed through a systematic correction. Subsequently, we quantitatively study patterning using sphere-tipped ultrafast probes as a function of retraction speed and dwell time to find that the mass of fluid transferred can be modulated by greater than an order of magnitude and that liquid features as small as 6 fg can be patterned and resolved. Taken together, this work addresses a persistent concern in DPN by enabling quantitative feedback for nanopatterning of aL-scale features and lays the foundation for programmably nanopatterning fluids.
RESUMO
A suspension of nanoparticles with very low volume fraction is found to assemble into a macroscopic cellular phase that is composed of particle-rich walls and particle-free voids under the collective influence of AC and DC voltages. Systematic study of this phase transition shows that it was the result of electrophoretic assembly into a two-dimensional configuration followed by spinodal decomposition into particle-rich walls and particle-poor cells mediated principally by electrohydrodynamic flow. This mechanistic understanding reveals two characteristics needed for a cellular phase to form, namely (1) a system that is considered two dimensional and (2) short-range attractive, long-range repulsive interparticle interactions. In addition to determining the mechanism underpinning the formation of the cellular phase, this work presents a method to reversibly assemble microscale continuous structures out of nanoscale particles in a manner that may enable the creation of materials that impact diverse fields including energy storage and filtration.
Assuntos
Eletricidade , Nanopartículas , Eletroforese , Transição de Fase , SuspensõesRESUMO
The nanomaterial landscape is so vast that a high-throughput combinatorial approach is required to understand structure-function relationships. To address this challenge, an approach for the synthesis and screening of megalibraries of unique nanoscale features (>10,000,000) with tailorable location, size, and composition has been developed. Polymer pen lithography, a parallel lithographic technique, is combined with an ink spray-coating method to create pen arrays, where each pen has a different but deliberately chosen quantity and composition of ink. With this technique, gradients of Au-Cu bimetallic nanoparticles have been synthesized and then screened for activity by in situ Raman spectroscopy with respect to single-walled carbon nanotube (SWNT) growth. Au3Cu, a composition not previously known to catalyze SWNT growth, has been identified as the most active composition.
Assuntos
Catálise , Nanoestruturas/química , Bibliotecas de Moléculas Pequenas , Cobre/química , Ligas de Ouro/química , Ensaios de Triagem em Larga Escala , Nanopartículas Metálicas/química , Nanotubos de Carbono/química , Análise Espectral RamanRESUMO
Nonuniform electric fields cause polarizable particles to move through an effect known as dielectrophoresis (DEP). Additionally, the particles themselves create nonuniform fields due to their induced dipoles. When the nonuniform field of one particle causes another to move, it represents a path to hierarchical assembly termed mutual DEP (mDEP). Anisotropic particles potentially provide further opportunities for assembly through intense and intricate local field profiles. Here, we construct a theoretical framework for describing anisotropic particles as templates for assembly through mDEP by considering the motion of small nanoparticles near larger anisotropic nanoparticles. Using finite element analysis, we study eight particle shapes and compute their field enhancement and polarizability in an orientation-specific manner. Strikingly, we find a more than tenfold enhancement in the field near certain particle shapes, potentially promoting mDEP. To more directly relate the field intensity to the anticipated assembly outcome, we compute the volume experiencing each field enhancement versus particle shape and orientation. Finally, we provide a framework for predicting how mixtures of two distinct particle species will begin to assemble in a manner that allows for the identification of conditions that kinetically bias assembly toward specific hierarchical outcomes.
Assuntos
Anisotropia , Eletroforese , Nanopartículas/química , Eletricidade , Análise de Elementos Finitos , Tamanho da PartículaRESUMO
The front cover artwork is provided by the group of Professor Keith Brown at Boston University. The image shows the magnetorheological fluid in a pressure-driven flow and highlights the length scales of the magnetic particles and highly anisotropic 2D sheets. Read the full text of the Article at 10.1002/cphc.202000948.
RESUMO
Magnetorheological fluids (MRF) are suspensions of magnetic particles that solidify in the presence of a magnetic field. While non-magnetic additives could improve MRF performance, explorations into such additives have not coalesced into an understanding of their influence, and particularly the role of additive morphology. Here, we explore α-Ni(OH)2 2D sheets, with aspect ratios of â¼25,000, as highly anisotropic MRF additives. Experiments studying pressure-driven flow of an MRF with and without these sheets show that their addition can increase the saturation pressure by as much as 46 %. However, shear-mode rheology reveals that they can also weaken the MRF by inhibiting the chaining of the iron particles at low field strengths and have no effect at higher field strengths. In order to reconcile the strikingly different results, we propose that 2D materials introduce a non-Newtonian handle to modify smart fluids in a manner that depends on the curvature of the shearing strain rate profile. Specifically, we identify a modification to the Buckingham-Reiner model of pressure-driven flow for a Bingham plastic in which the sheets widen the solidified plug. This work highlights the subtle interaction between particles in smart fluids and flows while emphasizing the opportunity for using anisotropy to tune this interaction.
RESUMO
Recent advances in machine learning (ML) offer new tools to extract new insights from large data sets and to acquire small data sets more effectively. Researchers in nanoscience are experimenting with these tools to tackle challenges in many fields. In addition to ML's advancement of nanoscience, nanoscience provides the foundation for neuromorphic computing hardware to expand the implementation of ML algorithms. In this Mini Review, we highlight some recent efforts to connect the ML and nanoscience communities by focusing on three types of interaction: (1) using ML to analyze and extract new insights from large nanoscience data sets, (2) applying ML to accelerate material discovery, including the use of active learning to guide experimental design, and (3) the nanoscience of memristive devices to realize hardware tailored for ML. We conclude with a discussion of challenges and opportunities for future interactions between nanoscience and ML researchers.
RESUMO
Despite the extensive use of biodegradable polyester nanoparticles for drug delivery, and reports of the strong influence of nanoparticle mechanics on nano-bio interactions, there is a lack of systematic studies on the mechanics of these nanoparticles under physiologically relevant conditions. Here, we report indentation experiments on poly(lactic acid) and poly(lactide-co-glycolide) nanoparticles using atomic force microscopy. While dried nanoparticles were found to be rigid at room temperature, their elastic modulus was found to decrease by as much as 30 fold under simulated physiological conditions (i.e., in water at 37 °C). Differential scanning calorimetry confirms that this softening can be attributed to the glass transition of the nanoparticles. Using a combination of mechanical and thermoanalytical characterization, the plasticizing effects of miniaturization, molecular weight, and immersion in water were investigated. Collectively, these experiments provide insight for experimentalists exploring the relationship between polymer nanoparticle mechanics and in vivo behavior.
Assuntos
Nanopartículas , Ácido Poliglicólico , Ácido Láctico , Tamanho da Partícula , Poliésteres , Copolímero de Ácido Poliláctico e Ácido PoliglicólicoRESUMO
Using a novel method developed to quantify the polarizability of photoluminescent nanoparticles in water, we present experimental observations of the extraordinary polarizability exhibited by nanoparticles of commensurate size with the Debye screening length, confirming previously reported theory. Semiconductor quantum dots (QDs) are ideal model nanoparticles to demonstrate this assay, due to their tunable size and bright photoluminescence. This assay is based upon microfluidic chambers with microelectrodes that generate trapping potentials that are weaker than thermal energy. By comparing the local electric field strength and variations in QD concentration, their polarizability was computed and found to agree with estimates based upon the hydrodynamic diameter found using light scattering. Strikingly, the polarizability of the nanoparticles increased 30-fold in low salt conditions compared to high salt conditions due to the increased thickness of the Debye layer relative to the particle radius. In addition to providing evidence that corroborates theoretical work studying direct solutions to the Poisson-Nernst-Planck equations, these observations provide an explanation for the previously observed conductivity dependence of biomolecule polarizability. As the polarizability of nanoparticles is of high importance to the electrically directed assembly of particles, as well as their interactions with other materials in complex environments, we anticipate that these results will be highly relevant to ongoing efforts in materials by design and nanomedicine.
Assuntos
Pontos Quânticos/química , Condutividade Elétrica , Eletricidade , Microscopia de Fluorescência/métodos , Tamanho da Partícula , Pontos Quânticos/ultraestrutura , Eletricidade EstáticaRESUMO
Atomic force microscope (AFM) probes and AFM imaging by extension are the product of exceptionally refined silicon micromachining, but are also restricted by the limitations of these fabrication techniques. Here, the nanoscale additive manufacturing technique direct laser writing is explored as a method to print monolithic cantilevered probes for AFM. Not only are 3D printed probes found to function effectively for AFM, but they also confer several advantages, most notably the ability to image in intermittent contact mode with a bandwidth approximately ten times larger than analogous silicon probes. In addition, the arbitrary structural control afforded by 3D printing is found to enable programming the modal structure of the probe, a capability that can be useful in the context of resonantly amplifying nonlinear tip-sample interactions. Collectively, these results show that 3D printed probes complement those produced using conventional silicon micromachining and open the door to new imaging techniques.
RESUMO
Atomic force microscopy (AFM) provides unique insight into the nanoscale properties of materials. It has been challenging, however, to use AFM to study soft materials such as liquids or gels because of their tendency to flow in response to stress. We propose an AFM-based technique for quantitatively analyzing the transport of soft materials from an AFM probe to a surface. Specifically, we present a method for loading an AFM probe with a single 0.3 to 30 pL droplet of liquid and subsequently measuring the mass of this liquid by observing the change in the vibrational resonance frequency of the cantilever. Using this approach, the mass of this liquid was detected with picogram-scale precision by a commercial AFM system. Additionally, sub-femtoliter droplets of liquid were transferred from the probe to a surface with agreement found between the real-time change in mass of the liquid-loaded probe and the volume of the feature written on the surface. To demonstrate the utility of this approach in studying nanoscale capillary and transport phenomena, we experimentally determine that the quantity of liquid transported from the tip to a surface in a given patterning operation scales as the mass of liquid on the probe to the 1.35 power. In addition to providing new avenues for studying the dynamics of soft materials on the nanoscale, this method can improve nanopatterning of soft materials by providing in situ feedback.
RESUMO
When coated with microscale hydrophobic particles, macroscopic liquid droplets can become non-wetting liquid marbles that exhibit an array of fascinating solid-like properties. Specifically, the force required to uniaxially compress liquid marbles depends on their volume, but it is unclear if the particle coating plays a role. In contrast, the failure of marbles upon compression does depend on the particle coating, but the conditions for failure do not appear to change with marble volume. Here, we experimentally study the elastic deformation and failure of liquid marbles and, by applying a doubly truncated oblate spheroid model to quantify their surface area, explore the role of marble volume and particle composition. First, we find that the work required to compress liquid marbles agrees with the product of the core fluid surface tension and the change in the marble surface area, validating that the elastic mechanics of liquid marbles is independent of the particle coating. Next, we study marble failure by measuring their ductility as quantified by the maximum fractional increase in marble surface area prior to rupture. Not only does marble ductility depend on the particle coating, but it also depends on marble volume with smaller marbles being more ductile. This size effect is attributed to an interaction between marble curvature and particle rafts held together by interparticle forces. These results illuminate new avenues to tailor the rupture of liquid marbles for applications spanning smart fluid handling and pollution mitigation.
RESUMO
If a solution of DNA-coated nanoparticles is allowed to crystallize, the thermodynamic structure can be predicted by a set of structural design rules analogous to Pauling's rules for ionic crystallization. The details of the crystallization process, however, have proved more difficult to characterize as they depend on a complex interplay of many factors. Here, we report that this crystallization process is dictated by the individual DNA bonds and that the effect of changing structural or environmental conditions can be understood by considering the effect of these parameters on free oligonucleotides. Specifically, we observed the reorganization of nanoparticle superlattices using time-resolved synchrotron small-angle X-ray scattering in systems with different DNA sequences, salt concentrations, and densities of DNA linkers on the surface of the nanoparticles. The agreement between bulk crystallization and the behavior of free oligonucleotides may bear important consequences for constructing novel classes of crystals and incorporating new interparticle bonds in a rational manner.
Assuntos
DNA/química , Nanopartículas/química , Cristalização , Ouro/química , Nanopartículas Metálicas/química , Nanotecnologia/métodos , Conformação de Ácido Nucleico , Oligonucleotídeos/química , Sais/química , Espalhamento de Radiação , Síncrotrons , Temperatura , Termodinâmica , Raios XRESUMO
Multivalent oligonucleotide-based bonding elements have been synthesized and studied for the assembly and crystallization of gold nanoparticles. Through the use of organic branching points, divalent and trivalent DNA linkers were readily incorporated into the oligonucleotide shells that define DNA-nanoparticles and compared to monovalent linker systems. These multivalent bonding motifs enable the change of "bond strength" between particles and therefore modulate the effective "bond order." In addition, the improved accessibility of strands between neighboring particles, either due to multivalency or modifications to increase strand flexibility, gives rise to superlattices with less strain in the crystallites compared to traditional designs. Furthermore, the increased availability and number of binding modes also provide a new variable that allows previously unobserved crystal structures to be synthesized, as evidenced by the formation of a thorium phosphide superlattice.
Assuntos
DNA/química , Ouro/química , Nanopartículas Metálicas/química , Césio/química , Cloretos/química , Cristalização , Indicadores e Reagentes , Nanotecnologia , Oligonucleotídeos/química , Tamanho da Partícula , Tório/químicaRESUMO
Beam pen lithography (BPL) in the liquid phase is evaluated. The effect of tip-substrate gap and aperture size on patterning performance is systematically investigated. As a proof-of-concept experiment, nanoarrays of nucleotides are synthesized using BPL in an organic medium, pointing toward the potential of using liquid phase BPL to perform localized photochemical reactions that require a liquid medium.
RESUMO
Although nanoparticles with exquisite properties have been synthesized for a variety of applications, their incorporation into functional devices is challenging owing to the difficulty in positioning them at specified sites on surfaces. In contrast with the conventional synthesis-then-assembly paradigm, scanning probe block copolymer lithography can pattern precursor materials embedded in a polymer matrix and synthesize desired nanoparticles on site, offering great promise for incorporating nanoparticles into devices. This technique, however, is extremely limited from a materials standpoint. To develop a materials-general method for synthesizing nanoparticles on surfaces for broader applications, a mechanistic understanding of polymer-mediated nanoparticle formation is crucial. Here, we design a four-step synthetic process that enables independent study of the two most critical steps for synthesizing single nanoparticles on surfaces: phase separation of precursors and particle formation. Using this process, we elucidate the importance of the polymer matrix in the diffusion of metal precursors to form a single nanoparticle and the three pathways that the precursors undergo to form nanoparticles. Based on this mechanistic understanding, the synthetic process is generalized to create metal (Au, Ag, Pt, and Pd), metal oxide (Fe(2)O(3), Co(2)O(3), NiO, and CuO), and alloy (AuAg) nanoparticles. This mechanistic understanding and resulting process represent a major advance in scanning probe lithography as a tool to generate patterns of tailored nanoparticles for integration with solid-state devices.
RESUMO
Scanning probe lithography (SPL) is a promising candidate approach for desktop nanofabrication, but trade-offs in throughput, cost, and resolution have limited its application. The recent development of cantilever-free scanning probe arrays has allowed researchers to define nanoscale patterns in a low-cost and high-resolution format, but with the limitation that these are duplication tools where each probe in the array creates a copy of a single pattern. Here, we report a cantilever-free SPL architecture that can generate 100 nanometer-scale molecular features using a 2D array of independently actuated probes. To physically actuate a probe, local heating is used to thermally expand the elastomeric film beneath a single probe, bringing it into contact with the patterning surface. Not only is this architecture simple and scalable, but it addresses fundamental limitations of 2D SPL by allowing one to compensate for unavoidable imperfections in the system. This cantilever-free dot-matrix nanoprinting will enable the construction of surfaces with chemical functionality that is tuned across the nano- and macroscales.
Assuntos
Nanopartículas/química , Nanoestruturas/química , Nanotecnologia/métodos , Polímeros/química , Algoritmos , Elastômeros , Cinética , Microscopia Eletrônica de Varredura , Modelos Químicos , Nanopartículas/ultraestrutura , Nanoestruturas/ultraestrutura , Nanotecnologia/instrumentação , Reprodutibilidade dos Testes , Propriedades de Superfície , TermodinâmicaRESUMO
Control of both photonic and plasmonic coupling in a single optical device represents a challenge due to the distinct length scales that must be manipulated. Here, we show that optical metasurfaces with such control can be constructed using an approach that combines top-down and bottom-up processes, wherein gold nanocubes are assembled into ordered arrays via DNA hybridization events onto a gold film decorated with DNA-binding regions defined using electron beam lithography. This approach enables one to systematically tune three critical architectural parameters: (1) anisotropic metal nanoparticle shape and size, (2) the distance between nanoparticles and a metal surface, and (3) the symmetry and spacing of particles. Importantly, these parameters allow for the independent control of two distinct optical modes, a gap mode between the particle and the surface and a lattice mode that originates from cooperative scattering of many particles in an array. Through reflectivity spectroscopy and finite-difference time-domain simulation, we find that these modes can be brought into resonance and coupled strongly. The high degree of synthetic control enables the systematic study of this coupling with respect to geometry, lattice symmetry, and particle shape, which together serve as a compelling example of how nanoparticle-based optics can be useful to realize advanced nanophotonic structures that hold implications for sensing, quantum plasmonics, and tunable absorbers.