Second-order nonlinear optical properties of X-shaped pyrazine derivatives.

This work reports an investigation of the second-order NLO properties of two isomer series of X-shaped pyrazine derivatives, by means of HRS measurements and DFT calculations. The systems differ in the relative position of the donor and acceptor substituents with respect to the axis formed by the nitrogen atoms of the central pyrazine ring. Although the magnitude of the second harmonic signal is similar, HRS measurements revealed that the anisotropy of the NLO response strongly differs in the two chromophore series, the one of the 2,3-isomers being strikingly dipolar, while the one of the 2,6-isomers is mostly octupolar. The experimental observations are well supported by DFT calculations. In particular, the sum-over-states approach allows us to rationalize the different NLO anisotropies observed in the two isomer series through a detailed analysis of the symmetry of the low-lying excited states.

Synthesis, photophysics and two-photon absorption of imidazole-centred tripodal chromophores.

Tripodal push-pull chromophores with D-(π-A)3 arrangement were synthesized using 1-methyl-2,4,5-triphenyl-1H-imidazole as a central electron donor, and their thermal, electrochemical, photophysical and non-linear optical properties were studied and corroborated with quantum-chemical calculations. Their facile synthesis involved Suzuki-Miyaura and Knoevenagel reactions, allowing the installation of various peripheral electron acceptors such as formyl, cyano, ester, trifluoromethyl and more complex moieties such as malonic/acetic acid derivatives, indan-1,3-dione and rhodanine. All phenyl rings appended at the central imidazole core were more or less twisted depending on the peripheral substitution. Although imidazole undergoes reversible one-electron oxidation, peripheral acceptors are reduced irreversibly in a multi-electron process. This behaviour is further seen as a variation of the LUMO, while the HOMO remained almost unaltered across the whole series. TD-DFT calculations revealed centrifugal charge transfer from the central imidazole to all C2, C4 and C5 branches occupied by the LUMO, LUMO+1 and LUMO+2. The HOMO-LUMO gap is tuneable within the range of 3.55-2.31 eV, while the longest-wavelength absorption/emission maxima were found within the broad range of 304-448/393-612 nm. Although the absorption spectra are solvent-independent, the emission depends strongly on the solvent polarity and the electron-withdrawing power of the peripheral acceptors. Extended chromophores with complex electron acceptors were investigated as two-photon absorbers, revealing relatively good cross-section values of up to 521 GM and a figure-of-merit (ΦF × Î´2PA) of around 190 GM.

Construction of bi(hetero)aryls via dicyanopyrazine-mediated photochemical cross-coupling.

A photochemical cross-coupling protocol towards bi(hetero)aryls has been developed. The coupling reactions were mediated by dicyanopyrazine photoredox catalyst, while a photoinduced disproportionation process has been identified as an accompanying mechanism, especially for pyrrole derivatives. The developed method allows the cross-coupling of five-membered rings such as pyrrole, imidazole, thiazole and oxazole as well as various diazines (pyridine and pyrimidine) and benzene derivatives. A plausible mechanism of the reaction has also been disclosed. The practical application and relevance of the developed method were demonstrated by constructing an atorvastatin core or by the gradual functionalization of benzo[c][1,2,5]thiadiazole. In total, twenty-one bi(hetero)aryls were prepared in yields ranging from 19 to 95%.

Push-Pull Derivatives Based on 2,4'-Biphenylene Linker with Quinoxaline, [1,2,5]Oxadiazolo[3,4-B]Pyrazine and [1,2,5]Thiadiazolo[3,4-B]Pyrazine Electron Withdrawing Parts.

A series of novel V-shaped quinoxaline, [1,2,5]oxadiazolo[3,4-b]pyrazine and [1,2,5]thiadiazolo[3,4-b]pyrazine push-pull derivatives with 2,4'-biphenylene linker were designed and their electrochemical, photophysical and nonlinear optical properties were investigated. [1,2,5]Oxadiazolo[3,4-b]pyrazine is the stronger electron-withdrawing fragment as shown by electrochemical, and photophysical data. All compounds are emissive in a solid-state (from the cyan to red region of the spectrum) and quinoxaline derivatives are emissions in DCM solution. It has been found that quinoxaline derivatives demonstrate important solvatochromism and extra-large Stokes shifts, characteristic of twisted intramolecular charge transfer excited state as well as aggregation induced emission. The experimental conclusions have been justified by theoretical (TD-)DFT calculations.

Simple and Reproducible Derivatization with Benzoyl Chloride: Improvement of Sensitivity for Multiple Lipid Classes in RP-UHPLC/MS.

The chemical derivatization of multiple lipid classes was developed using benzoyl chloride as a nonhazardous derivatization agent at ambient conditions. The derivatization procedure was optimized with standards for 4 nonpolar and 8 polar lipid classes and measured by reversed-phase ultrahigh-performance liquid chromatography-tandem mass spectrometry. The derivatization and nonderivatization approaches were compared on the basis of the calibration curves of 22 internal standards from 12 lipid classes. The new method decreased the limit of detection 9-fold for monoacylglycerols (0.9-1.0 nmol/mL), 6.5-fold for sphingoid base (0.2 nmol/mL), and 3-fold for diacylglycerols (0.9 nmol/mL). The sensitivity expressed by the ratio of calibration slopes was increased 2- to 10-fold for almost all investigated lipid classes and even more than 100-fold for monoacylglycerols. Moreover, the benzoylation reaction produces a more stable derivative of cholesterol in comparison to the easily in-source fragmented nonderivatized form and enabled the detection of fatty acids in a positive ion mode, which does not require polarity switching as for the nonderivatized form. The intralaboratory comparison with an additional operator without previous derivatization experiences shows the simplicity, robustness, and reproducibility. The stability of the derivatives was determined by periodical measurements during a one month period and five freeze/thaw cycles. The fully optimized derivatization method was applied to human plasma, which allows the detection of 169 lipid species from 11 lipid classes using the high confidence level of identification in reversed-phase (RP)-ultra high performance liquid chromatography (UHPLC)/mass spectrometry (MS). Generally, we detected more lipid species for monoacylglycerols, diacylglycerols, and sphingoid bases in comparison with previously reported papers without the derivatization.

Photophysics of 9,9-Dimethylacridan-Substituted Phenylstyrylpyrimidines Exhibiting Long-Lived Intramolecular Charge-Transfer Fluorescence and Aggregation-Induced Emission Characteristics.

Six pyrimidine-based push-pull systems substituted at positions C2 and C4/6 with phenylacridan and styryl moieties, employing methoxy or N,N-diphenylamino donors, have been designed and synthesized through cross-coupling and Knoevenagel reactions. X-ray analysis confirmed that the molecular structure featured the acridan moiety arranged perpendicularly to the residual π system. Photophysical studies revealed significant differences between the methoxy and N,N-diphenylamino chromophores. Solvatochromic studies revealed that the methoxy derivatives showed dual emission in polar solvents. Time-resolved spectroscopy revealed that the higher energy band involved very fast (<80 ps) fluorescence, whereas the lower energy one included long components (≈30 ns) due to long-lived intramolecular charge-transfer fluorescence. In contrast to N,N-diphenylamino chromophores, the methoxy derivatives also showed aggregation-induced emission in mixtures of THF/water, as well as dual emission in thin films, covering almost the whole visible spectrum with corresponding chromaticity coordinates not far from that of pure white light. These properties render the methoxy derivatives as very promising organic materials for white organic light-emitting diodes.

Imidazole-Functionalized Y-Shaped Push-Pull Dye for Nerve Agent Sensing as well as a Catalyst for Their Detoxification.

A Y-shaped push-pull dye (1) with N,N-dimethylanilino donors and a benzonitrile acceptor connected via an imidazole-based π-conjugated spacer was designed. It showed a dark yellow color in solution due to facile intramolecular charge-transfer interaction, but no fluorescence was detected, presumably due to the photo-induced electron transfer effect of the imidazole moiety. However, addition of nerve agents such as diethyl chlorophosphate (DCP, sarin mimic) and diethyl cyanophosphate (DCNP, Tabun mimic) resulted in a blue-colored fluorescence with fading of the native dark yellow color. Mechanistic studies indicated nucleophilic attack of imidazole at the phosphorus of DCP or DCNP, leading to the formation of a phosphorylated intermediate, which undergoes time-dependent hydrolysis (∼24 h) in aqueous medium. This process recovers the free probe (enzyme-like behavior) and releases a less-toxic organophosphate compound as the byproduct. The phosphorylated derivative of 1, formed during such interaction, shows a different electronic behavior, which reduces the extent of charge-transfer interaction as well as nonradiative decay and supports emissive properties. Considering the high sensitivity of 1 towards DCP and DCNP with LOD 35 and 42 ppb, we prepared easy test strips for on-site vapor-phase detection of nerve agents.

Electrochemical investigation of structurally varied azinium scaffolds.

Inspired by the successful utilization of aziniums as anolytes in redox-flow batteries, we have designed and prepared a systematically extended series of (di)azinium compounds based on pyrazine, bipyridine, 1,5-naphthyridine, 3,8-phenanthroline, (E)-4,4'-diazastilbene and 1,2-bis(pyridin-4-yl)acetylene. It has been revealed that the fundamental electrochemical properties are affected mostly by the water-solubility and chemical stability of the particular redox forms. Based on the systematically evolved azinium structure and gathered electrochemical data, structure-property relationships were thoroughly elucidated. Further investigation on flow battery cells identified that the known 4,4'-bipyridinium decorated with two peripheral N-propyl-3-sulfonato pendants allows utilizing both redox steps with good cycling stability, while the naphthyridine scaffold turned out to be a new and promising scaffold for redox-flow batteries.

Tuning the Photophysical Properties of Push-Pull Azaheterocyclic Chromophores by Protonation: A Brief Overview of a French-Spanish-Czech Project.

Conjugated push-pull molecules that incorporate nitrogen heterocycles as electron-withdrawing units are interesting materials because of their luminescence properties. These chromophores can be easily and reversibly protonated at the nitrogen atom of the heterocyclic ring and this can cause dramatic color changes. White and multi-color photoluminescence both in solution and in the solid state can be obtained by an accurate control of the amount of acid. Thus, with a suitable design these compounds have potential applications in the development of colorimetric pH sensors and the fabrication of OLEDs based on only one material. We provide here a brief overview of our collaborative efforts made in this area.

How N-(pyridin-4-yl)pyridin-4-amine and its methyl and nitro derivatives are arranged in the interlayer space of zirconium sulfophenylphosphonate: a problem solved by experimental and calculation methods.

Classical molecular simulation methods were used for a description of an arrangement of intercalated molecules N-(pyridin-4-yl)pyridin-4-amine (AH) and its derivatives, 3-methyl-N-(pyridin-4-yl)pyridin-4-amine (AMe), and 3-nitro-N-(pyridin-4-yl)pyridin-4-amine (ANO2) within a layered structure of zirconium 4-sulfophenylphosphonate. The intercalated molecules were placed between SO3H groups of the host layers. Their mutual positions and orientations were solved by molecular simulation methods and compared with the presented experimental results. Final calculated data showed differences of partially disordered arrangement of the intercalated molecules between zirconium 4-sulfophenylphosphonate layers. The calculation results revealed a dense net of hydrogen bonds connecting water molecules and the guests in the interlayer space and the sulfo groups of the host layers. We calculated the dipole moments of the AH, AMe and ANO2 guests in the final models in order to illustrate potential use of these materials in non-linear optics.

Branching effect on the linear and nonlinear optical properties of styrylpyrimidines.

This contribution aims at investigating the branching effect on the steady state, time resolved fluorescence and two-photon absorption (2PA) properties of dimethylamino and diphenylamino substituted styrylpyrimidine derivatives, by means of a combined experimental and theoretical study. In contrast to classical branched molecules with a triphenylamine central core and electron accepting groups at the periphery, here, branched molecules with reverse topology and different symmetries are examined, namely a styrylpyrimidine group is used as the electron withdrawing core and dimethylamino or diphenylamino donors are incorporated at the periphery. Besides, compared to the great majority of existing branched systems, the herein studied molecules do not have C3 symmetry. For this reason, the region of the linear and non-linear optical spectra of the two and three branched chromophores is actually similar. Interestingly, while the one-photon absorption spectra of one-branched systems versus two- or three-branched ones are spectrally shifted, there is almost no spectral shift in the main 2PA spectral region. Meanwhile, there is still an enhancement of both linear and nonlinear optical responses. Overall, here we developed a strategy that enhances the 2PA response while maintaining the spectral position. Specifically, 2PA cross section values as high as 500 GM have been obtained for the diphenylamino A-(π-D)3 molecule in dichloromethane.

Towards Volatile Organoselenium Compounds with Cost-Effective Synthesis.

The current portfolio of organoselenium compounds applicable as volatile precursors for atomic layer deposition can be denoted as very limited. Hence, we report herein facile and cost-effective preparation of two bis(trialkylstannyl)selenides as well as one selenole and three bis(trialkylsilyl)selenides. Their syntheses have been optimized to: (i) use readily available and inexpensive starting materials, (ii) involve operationally simple methodology (heating in a pressure vessel), (iii) use a minimum amount of additives and catalysts, and (iv) either exclude additional purification or involve only simple distillation. The chemical structure of prepared Se derivatives was confirmed by multinuclear NMR and GC/MS. Their fundamental thermal properties were investigated by differential scanning calorimetry (DSC) and TGA methods that revealed thermal stability within the range of 160-300 °C.

Simultaneous Detection of Cu2+ and Hg2+ via Two Mutually Independent Sensing Pathways of Biimidazole Push-Pull Dye.

An easy-to-synthesize, biimidazole push-pull dye has been designed, comprising two mutually independent analyte binding sites. It has been found that Hg2+ coordinates with the compound via thiophene residue and inhibits the charge-transfer (CT) process, which transforms the yellow-colored solution colorless. On the other hand, an unusually large bathochromic shift is observed in CT band upon addition of Cu2+, accompanied by a change in the color from yellow to red. A rather surprising observation is made from mechanistic studies, where it indicates that Cu2+ catalyzes the formation of 6-imino-5,6-dihydropyrrolo[3,4- d]imidazole-4(3 H)-one (IPIMO) derivative. This strongly affects the charge-transfer state of the compound as well as its polarizability. Most importantly, this is the first report where IPIMO formation reaction has been exploited for sensing of a metal ion. Further, the system was employed for screening of both of these metal ions in wastewater samples. Recovery values ranging from 93.3 to 105.0% confirm the suitability of the present method for estimating trace level of metal ions in complex matrices. In addition, inexpensive on-site detection systems were developed using paper strips.

Small isomeric push-pull chromophores based on thienothiophenes with tunable optical (non)linearities.

Fourteen new D-π-A push-pull chromophores based on two isomeric thienothiophene donors and seven acceptors of various electronic natures have been designed and conveniently synthesized. In contrast to known thienothiophene push-pull molecules, the prepared small chromophores proved to be organic materials with easily tunable thermal, electrochemical and (non)linear optical properties. It has also been shown that small structural variation may result in significantly improved/varied fundamental properties. Very detailed structure-property relationships were elucidated within the systematically developed series of push-pull molecules, which may serve as a useful guide in designing new D-π-A molecules based on fused thiophene scaffolds.

Photophysical and Protonation Time Resolved Studies of Donor-Acceptor Branched Systems With Pyridine Acceptors.

A comparative study of the photophysical properties of octupolar pyridyl-terminated triphenylamine molecule, with its quadrupolar and dipolar analogues, by means of ambient and low temperature steady state spectroscopy and femtosecond to nanosecond time-resolved fluorescence spectroscopy is reported. The push-pull molecules bear triphenylamine electron donating core, pyridine peripheral electron acceptors, and acetylene π-bridge. The samples were studied in solvents of varying polarity and also upon addition of small amounts of acetic acid to induce protonation of the pyridine group. All samples exhibit significant positive fluorescence solvatochromism as well as a relaxation of their excited state to a solvent relaxed intramolecular charge transfer state on the picosecond time scale. For the octupolar compound, excited state relaxation occurs simultaneously with excitation energy hopping among the branches. The hopping time is solvent polarity controlled since it becomes slower as the polarity increases. The experimental hopping times are compared to those predicted by Förster and Fermi formulations. The samples are capable of emitting broadband light covering almost the whole visible spectrum by careful control of protonation. Energy transfer from the neutral toward the protonated species on the 1 ps time scale is revealed.

2,4-Distyryl- and 2,4,6-Tristyrylpyrimidines: Synthesis and Photophysical Properties.

The synthesis of a series of 20 new 2,4,6-tristyrylpyrimidines and three new 2,4-distyrylpyrimidines by means of combination of Knoevenagel condensation and Suzuki-Miyaura cross-coupling reaction is reported. This methodology enables us to obtain chromophores with identical or different substituent on each arm. The photophysical properties of the compounds are described. Optical properties and time-dependent density functional theory calculations indicate that photophysical properties of target compounds are mainly affected by the nature of the electron-donating group in C4/C6 positions, except when the C2 substituent is a significantly stronger electron-donating group. However, the C2 substituent has a strong influence on emission quantum yield: addition of a strong electron-donating group tends to decrease the fluorescence quantum yield, whereas a moderate electron-withdrawing group results in a significant increase of fluorescence quantum yield.

Dipolar NLO Chromophores Bearing Diazine Rings as π-Conjugated Linkers.

The synthesis of a series of push-pull derivatives bearing triphenylamine electron-donating group, cyclopenta[c]thiophen-4,6-dione electron acceptor and various π-linkers including (hetero)aromatic fragments is reported. All target chromophores with systematically varied π-linker structure were further investigated by electrochemistry, absorption measurements, and EFISH experiments in conjunction with DFT calculations. Based on electrochemical and photophysical measurements, when a polarizable 2,5-thienylene moiety is embedded into the chromophore π-backbone the highest intramolecular charge transfer (ICT) is observed. Benzene, pyrimidine, and pyridazine derivatives exhibit lower polarizability and extent of the ICT across these π-linkers. The elongation of the π-conjugated system via additional ethenylene linker results in a significant reduction of the HOMO-LUMO gap and an enhancement of the NLO response. Whereas it does not significantly influence electrochemical and linear optical properties, the orientation of the pyrimidine ring seems to be a key parameter on the µß value due to significant variation of the dipolar moment (µ) value. In 2a and 2c, pyrimidine is oriented to behave as an acceptor and thus generate dipolar molecule with µ above 5 D, whereas in 2b and 2d ground state dipole moment is significantly reduced. This study seems to indicate a high aromaticity of pyrimidine and pyridazine derivatives, close to the benzene analogues and significantly higher than thiophene analogues.

Structure-property relationships and third-order nonlinearities in diketopyrrolopyrrole based D-π-A-π-D molecules.

Nine new quadrupolar chromophores based on diketopyrrolopyrrole were designed and prepared by cross-coupling reactions. The property tuning has been achieved by structural variation of the peripheral substituents (donor) and enlargement of the π-system. Fundamental properties of target molecules were studied by differential scanning calorimetry, electrochemistry, and absorption and emission spectra. Nonlinear optical properties were studied by measuring the third harmonic generation. The experimental data were completed by quantum-chemical calculations and structure-property relationships were elucidated.

Alphabet-Inspired Design of (Hetero)Aromatic Push-Pull Chromophores.

Push-pull molecules represent a unique and fascinating class of organic π-conjugated materials. Herein, we provide a summary of their recent extraordinary design inspired by letters of the alphabet, especially focusing on H-, L-, T-, V-, X-, and Y-shaped molecules. Representative structures from each class were presented and their fundamental properties and prospective applications were discussed. In particular, emphasis is given to molecules recently prepared in our laboratory with T-, X-, and Y-shaped arrangements based on indan-1,3-dione, benzene, pyridine, pyrazine, imidazole, and triphenylamine. These push-pull molecules turned out to be very efficient charge-transfer chromophores with tunable properties suitable for second-order nonlinear optics, two-photon absorption, reversible pH-induced and photochromic switching, photocatalysis, and intercalation.

N→Sn-Coordinated Stannaoxidoborates Containing a SnB4O6 Unit.

We report here the synthesis of new N→Sn-coordinated stannaoxidoborates H[LSnB4O6R4] {L = [2,6-(Me2NCH2)C6H3](-) and R = Ph (6), 4-Br-Ph (7), 3,5-(CF3)2-Ph (8), and 4-CHO-Ph (9)} containing a nonsymmetric SnB4O6 unit. Compounds 6-9 represent new derivatives of the pentaborates [B5O6R4](-) in which the central boron is substituted by a tin atom. Compounds 6-9 were characterized by means of elemental analysis, electrospray ionization mass spectrometry, and NMR spectroscopy and in the case of 6-8 also by single-crystal X-ray diffraction analysis. The structures of N→Sn-coordinated stannaoxidoborates 6-8 consist of a spirobicyclic arrangement, with two six-membered SnB2O3 rings at the tin atom providing the new stannaoxidoborate [LSnB4O6R4](-) motif, which is compensated for by the proton atom coordinated to the Me2N group of the ligand L. The linear and thermal properties of 6-9 were studied with the help of electronic absorption spectra and differential scanning calorimetry. In addition, the presence of the nonsymmetric stannaoxidoborate SnB4O6 unit in 6, 7, and 9 prompted us to investigate their second-order nonlinear-optical properties.