Population-based age adjustment tables for use in occupational hearing conservation programs.

Objective: In occupational hearing conservation programmes, age adjustments may be used to subtract expected age effects. Adjustments used in the U.S. came from a small dataset and overlooked important demographic factors, ages, and stimulus frequencies. The present study derived a set of population-based age adjustment tables and validated them using a database of exposed workers.Design: Cross-sectional population-based study and retrospective longitudinal cohort study for validation.Study sample: Data from the U.S. National Health and Nutrition Examination Survey (unweighted n = 9937) were used to produce these tables. Male firefighters and emergency medical service workers (76,195 audiograms) were used for validation.Results: Cross-sectional trends implied less change with age than assumed in current U.S. regulations. Different trends were observed among people identifying with non-Hispanic Black race/ethnicity. Four age adjustment tables (age range: 18-85) were developed (women or men; non-Hispanic Black or other race/ethnicity). Validation outcomes showed that the population-based tables matched median longitudinal changes in hearing sensitivity well.Conclusions: These population-based tables provide a suitable replacement for those implemented in current U.S. regulations. These tables address a broader range of worker ages, account for differences in hearing sensitivity across race/ethnicity categories, and have been validated for men using longitudinal data.

Inter-laboratory comparison of three earplug fit-test systems.

The National Institute for Occupational Safety and Health (NIOSH) sponsored tests of three earplug fit-test systems (NIOSH HPD Well-Fit, Michael & Associates FitCheck, and Honeywell Safety Products VeriPRO). Each system was compared to laboratory-based real-ear attenuation at threshold (REAT) measurements in a sound field according to ANSI/ASA S12.6-2008 at the NIOSH, Honeywell Safety Products, and Michael & Associates testing laboratories. An identical study was conducted independently at the U.S. Army Aeromedical Research Laboratory (USAARL), which provided their data for inclusion in this article. The Howard Leight Airsoft premolded earplug was tested with twenty subjects at each of the four participating laboratories. The occluded fit of the earplug was maintained during testing with a soundfield-based laboratory REAT system as well as all three headphone-based fit-test systems. The Michael & Associates lab had the highest average A-weighted attenuations and smallest standard deviations. The NIOSH lab had the lowest average attenuations and the largest standard deviations. Differences in octave-band attenuations between each fit-test system and the American National Standards Institute (ANSI) sound field method were calculated (Attenfit-test - AttenANSI). A-weighted attenuations measured with FitCheck and HPD Well-Fit systems demonstrated approximately ±2 dB agreement with the ANSI sound field method, but A-weighted attenuations measured with the VeriPRO system underestimated the ANSI laboratory attenuations. For each of the fit-test systems, the average A-weighted attenuation across the four laboratories was not significantly greater than the average of the ANSI sound field method. Standard deviations for residual attenuation differences were about ±2 dB for FitCheck and HPD Well-Fit compared to ±4 dB for VeriPRO. Individual labs exhibited a range of agreement from less than a dB to as much as 9.4 dB difference with ANSI and REAT estimates. Factors such as the experience of study participants and test administrators, and the fit-test psychometric tasks are suggested as possible contributors to the observed results.

Noise impacts from professional dog grooming forced-air dryers.

This study was designed to measure the sound output of four commonly used brands of forced-air dryers used by dog groomers in the United States. Many dog groomers have questions about the effect of this exposure on their hearing, as well as on the hearing of the dogs that are being groomed. Readings taken from each dryer at 1 meter (the likely distance of the dryer from the groomer and the dog) showed average levels ranging from 105.5 to 108.3 dB SPL or 94.8 to 108.0 dBA. Using the 90 dBA criterion required by the US Occupational Safety and Health Administration, dog groomers/bathers are at risk if exposure to the lowest intensity dryer (94.8 dBA) exceeds 4 hours per day. If the more stringent 85 dBA criterion and 3 dB tradeoff is applied, less than one hour of exposure is permissible in an 8 hour day. Cautions are recommended for any persons exposed to noise from forced-air dryers.

The Wildland Firefighter Exposure and Health Effect (WFFEHE) Study: Rationale, Design, and Methods of a Repeated-Measures Study.

The wildland firefighter exposure and health effect (WFFEHE) study was a 2-year repeated-measures study to investigate occupational exposures and acute and subacute health effects among wildland firefighters. This manuscript describes the study rationale, design, methods, limitations, challenges, and lessons learned. The WFFEHE cohort included fire personnel ages 18-57 from six federal wildland firefighting crews in Colorado and Idaho during the 2018 and 2019 fire seasons. All wildland firefighters employed by the recruited crews were invited to participate in the study at preseason and postseason study intervals. In 2019, one of the crews also participated in a 3-day midseason study interval where workplace exposures and pre/postshift measurements were collected while at a wildland fire incident. Study components assessed cardiovascular health, pulmonary function and inflammation, kidney function, workplace exposures, and noise-induced hearing loss. Measurements included self-reported risk factors and symptoms collected through questionnaires; serum and urine biomarkers of exposure, effect, and inflammation; pulmonary function; platelet function and arterial stiffness; and audiometric testing. Throughout the study, 154 wildland firefighters participated in at least one study interval, while 144 participated in two or more study interval. This study was completed by the Centers for Disease Control and Prevention's National Institute for Occupational Safety and Health through a collaborative effort with the U.S. Department of Agriculture Forest Service, Department of the Interior National Park Service, and Skidmore College. Conducting research in the wildfire environment came with many challenges including collecting study data with study participants with changing work schedules and conducting study protocols safely and operating laboratory equipment in remote field locations. Forthcoming WFFEHE study results will contribute to the scientific evidence regarding occupational risk factors and exposures that can impact wildland firefighter health over a season and across two wildland fire seasons. This research is anticipated to lead to the development of preventive measures and policies aimed at reducing risk for wildland firefighters and aid in identifying future research needs for the wildland fire community.

Relationship between comfort and attenuation measurements for two types of earplugs.

Noise-induced hearing loss is almost always preventable if properly fitted hearing protectors are worn to reduce exposure. Many individuals choose not to wear hearing protection because it may interfere with effective communication in the workplace or it may be uncomfortable. Hearing protector comfort has not received the same amount of attention as noise reduction capability. The present study was conducted to evaluate the comfort level of two different types of insert earplugs as well as the attenuation levels achieved by the earplugs. Attenuation levels were obtained with a commercially available earplug fit-test system, and the comfort ratings were obtained by questionnaire. The primary research objective was to determine whether hearing protector comfort was related to measured attenuation values. A linear mixed effects model provided evidence for an inverse relationship between comfort and attenuation.

Effects of training on hearing protector attenuation.

The effect of training instruction, whether presented as the manufacturer's printed instructions, a short video training session specific to the product, or as a one-on-one training session was evaluated using four hearing protection devices with eight groups of subjects. Naïve subjects were recruited and tested using three different forms of training: written, video, and individual training. The group averages for A-weighted attenuation were not statistically significant when compared between the video or the written instruction conditions, regardless of presentation order. The experimenter-trained A-weighted attenuations were significantly greater than the written and video instruction for most of the protectors and groups. For each earplug, the noise reduction statistic for A-weighting (NRS A ) and the associated confidence intervals were calculated for the 80 th and 20 th percentiles of protection. Across subject groups for each protector, the differences between NRS A ratings were found to be not statistically significant. Several comparisons evaluating the order of testing, the type of testing, and statistical tests of the performance across the groups are presented.

Results of the National Institute for Occupational Safety and Health-U.S. Environmental Protection Agency interlaboratory comparison of American National Standards Institute S12.6-1997 Methods A and B.

The National Institute for Occupational Safety and Health and the Environmental Protection Agency sponsored the completion of an interlaboratory study to compare two fitting protocols specified by ANSI S12.6-1997 (R2002) [(2002). American National Standard Methods for the Measuring Real-Ear Attenuation of Hearing Protectors, American National Standards Institute, New York]. Six hearing protection devices (two earmuffs, foam, premolded, custom-molded earplugs, and canal-caps) were tested in six laboratories using the experimenter-supervised, Method A, and (naive) subject-fit, Method B, protocols with 24 subjects per laboratory. Within-subject, between-subject, and between-laboratory standard deviations were determined for individual frequencies and A-weighted attenuations. The differences for the within-subject standard deviations were not statistically significant between Methods A and B. Using between-subject standard deviations from Method A, 3-12 subjects would be required to identify 6-dB differences between attenuation distributions. Whereas using between-subject standard deviations from Method B, 5-19 subjects would be required to identify 6-dB differences in attenuation distributions of a product tested within the same laboratory. However, the between-laboratory standard deviations for Method B were -0.1 to 3.0 dB less than the Method A results. These differences resulted in considerably more subjects being required to identify statistically significant differences between laboratories for Method A (12-132 subjects) than for Method B (9-28 subjects).

Self-perception of hearing ability as a strong predictor of hearing aid purchase.

BACKGROUND: Hearing threshold data are not particularly predictive of self-perceived hearing handicap or readiness to pursue amplification. Poor correlations between these measures have been reported repeatedly. When a patient is evaluated for hearing loss, it is common to collect both threshold data and the individual's self-perception of hearing ability. This is done to help the patient make an appropriate choice related to the pursuit of amplification or other communication strategies. It would be valuable, though, for the audiologist to be able to predict which patients are ready for amplification, which patients require more extensive counseling before pursuing amplification, and which patients simply are not ready for amplification regardless of the audiometric data. PURPOSE: The purpose of this study was to evaluate the following question for its potential usefulness as a determinant of patient readiness for amplification: "On a scale from 1 to 10, 1 being the worst and 10 being the best, how would you rate your overall hearing ability?" RESEARCH DESIGN: The test-retest reliability and the predictive value of the question, based on final hearing aid purchase, were evaluated in a private practice setting. STUDY SAMPLE: Eight hundred forty hearing-impaired adults in the age range from 18 to 95 years. COLLECTION AND ANALYSIS: Data were collected retrospectively from patient files. RESULTS AND CONCLUSION: Results were repeatable and supported the use of this question in similar clinical settings.

Analysis of nonstandard noise dosimeter microphone positions.

This study was conducted as part of a project involving the evaluation of a new type of noise exposure monitoring paradigm. Laboratory tests were conducted to assess how "nonstandard" dosimeter microphones and microphone positions measured noise levels under different acoustical conditions (i.e., diffuse field and direct field). The data presented in this article reflect measurement differences due to microphone position and mounting/supporting structure only and are not an evaluation of any particular complete dosimeter system. To varying degrees, the results obtained with the dosimeter microphones used in this study differed from the reference results obtained in the unperturbed (subject absent) sound field with a precision (suitable for use in an ANSI Type 1 sound level meter) (1)/(2)-inch (12.7 mm) measurement microphone. Effects of dosimeter microphone placement in a diffuse field were found to be minor for most of the test microphones/locations, while direct field microphone placement effects were found to be quite large depending on the microphone position and supporting structure, sound source location, and noise spectrum.

Comparison of speech intelligibility measures for an electronic amplifying earmuff and an identical passive attenuation device.

The purpose of this study was to identify any differences between speech intelligibility measures obtained with MineEars electronic earmuffs (ProEars, Westcliffe, CO, USA) and the Bilsom model 847 (Sperian Hearing Protection, San Diego, CA, USA), which is a conventional passive-attenuation earmuff. These two devices are closely related, since the MineEars device consisted of a Bilsom 847 earmuff with the addition of electronic amplification circuits. Intelligibility scores were obtained by conducting listening tests with 15 normal-hearing human subject volunteers wearing the earmuffs. The primary research objective was to determine whether speech understanding differs between the passive earmuffs and the electronic earmuffs (with the volume control set at three different positions) in a background of 90 dB(A) continuous noise. As expected, results showed that speech intelligibility increased with higher speech-to-noise ratios; however, the electronic earmuff with the volume control set at full-on performed worse than when it was set to off or the lowest on setting. This finding suggests that the maximum volume control setting for these electronic earmuffs may not provide any benefits in terms of increased speech intelligibility in the background noise condition that was tested. Other volume control settings would need to be evaluated for their ability to produce higher speech intelligibility scores. Additionally, since an extensive electro-acoustic evaluation of the electronic earmuff was not performed as a part of this study, the exact cause of the reduced intelligibility scores at full volume remains unknown.

Working in noise with a hearing loss: perceptions from workers, supervisors, and hearing conservation program managers.

OBJECTIVE: Workers with hearing loss face special problems, especially when working in noise. However, conventional hearing conservation practices do not distinguish between workers with normal hearing versus impaired hearing. This study collected information from workers with self-reported noise exposure and hearing loss, supervisors of such workers, and hearing conservation program managers through focus groups and in-depth interviews to evaluate their perspectives on the impact of hearing loss on safety and job performance, the use of hearing protection, and information needed to appropriately manage hearing-impaired workers who work in noisy environments. RESULTS: Concerns about working in noise with a hearing loss could be grouped into the following 10 categories: impact on job performance, impact on job safety, impaired ability to hear warning signals, impaired ability to monitor equipment, interference with communication, stress and/or fatigue, impaired communication caused by hearing protector use, reduced ability to monitor the environment as the result of hearing protector use, concerns about future quality of life, and concerns about future employability. Mostly, there was an agreement between the perceptions of workers, supervisors, and hearing conservation program managers regarding difficulties associated with hearing loss and consequent needs. These findings suggest that noise-exposed workers with hearing loss face many of the same problems reported in the literature by noise-exposed workers with normal hearing, with additional concerns primarily about job safety as the result of a reduced ability to hear environmental sounds, warning signals, and so forth. CONCLUSIONS: The study outlines potential challenges regarding job safety and hearing conservation practices for noise-exposed, hearing-impaired workers. Awareness of these issues is a necessary first step toward providing appropriate protective measures for noise-exposed, hearing-impaired workers.