Reduction of pathogens in greywater with biological and sustainable treatments selected through a multicriteria approach.

Non-potable reuse of greywater (GW) can represent a valid alternative to freshwater consumption, satisfying the Sustainable Development Goals promoted by United Nations. The Multi-Criteria Analysis (MCA) was applied to select the most suitable processes for the reduction of microbiological contamination in GW. A pilot plant, including horizontal flow constructed wetland (CW) and anaerobic filtration (AF) in parallel, best treatment options according to MCA results, was built to treat GW collected from a Venezuelan family. (i) The removal efficiency of microbiological parameters, and (ii) the turbidity as possible microbiological contamination indicator and possible influence factor of disinfection treatment, were investigated. Except for Escherichia coli (4.1 ± 0.9 log reduction with AF), CW achieved the best reductions yields for total coliforms, faecal coliforms, and Salmonella, respectively equal to 3.1 ± 0.5 log, 4.3 ± 0.5 log, and 2.9 ± 0.4 log. In accordance with Venezuelan legislation and WHO guidelines, GW treated with CW was found to be suitable for irrigation reuse for non-edible crops. However, the reduction of pathogens by CW should be considered as a preliminary and not complete disinfection treatment. To reuse GW, especially in the irrigation of edible crops, stronger disinfection treatment should be considered as a complement to the preliminary disinfection performed by CW, to avoid any kind of risk. No significant correlation was found for turbidity either as a possible predictor of microbiological contamination or as an influence on biological disinfection.

Discussion about the Latest Findings on the Possible Relation between Air Particulate Matter and COVID-19.

Since SARS-CoV-2 was identified, the scientific community has tried to understand the variables that can influence its spread. Several studies have already highlighted a possible link between particulate matter (PM) and COVID-19. This work is a brief discussion about the latest findings on this topic, highlighting the gaps in the current results and possible tips for future studies. Based on the literature outcomes, PM is suspected to play a double role in COVID-19: a chronic and an acute one. The chronic role is related to the possible influence of long-term and short-term exposure to high concentrations of PM in developing severe forms of COVID-19, including death. The acute role is linked to the possible carrier function of PM in SARS-CoV-2. The scientific community seems sure that the inflammatory effect on the respiratory system of short-term exposure to a high concentration of PM, and other additional negative effects on human health in cases of longer exposure, increases the risk of developing a more severe form of COVID-19 in cases of contagion. On the contrary, the results regarding PM acting as a carrier of SARS-CoV-2 are more conflicting, especially regarding the possible inactivation of the virus in the environment, and no final explanation on the possible acute role of PM in the spread of COVID-19 can be inferred.

Applications of Up-Flow Anaerobic Sludge Blanket (UASB) and Characteristics of Its Microbial Community: A Review of Bibliometric Trend and Recent Findings.

The interest in research on up-flow anaerobic sludge blanket (UASB) reactors is growing. The meta-analysis of bibliometric data highlighted the growing interest in four diverse topics: (i) energy recovery production; (ii) combination with other treatments; (iii) the study of processes for the removal of specific pollutants and, (iv) characterization of microbial community and granular sludge composition. In particular, the papers published in the first 6 months of 2021 on this process were selected and critically reviewed to highlight and discuss the results, the gaps in the literature and possible ideas for future research. Although the state of research on UASB is to be considered advanced, there are still several points that will be developed in future research such as the consolidation of the results obtained on a semi-industrial or real scale, the use of real matrices instead of synthetic ones and a more in-depth study of the effect of substances such as antibiotics on the microbiota and microbiome of UASB granular biomass. To date, few and conflicting data about the environmental footprint of UASB are available and therefore other studies on this topic are strongly suggested.

Can particulate matter be identified as the primary cause of the rapid spread of CoViD-19 in some areas of Northern Italy?

Northern Italy was the most affected by CoViD-19 compared to other Italian areas and comprises zones where air pollutants concentration was higher than in the rest of Italy. The aim of the research is to determine if particulate matter (PM) has been the primary cause of the high CoViD-19 spread rapidity in some areas of Northern Italy. Data of PM for all the 41 studied cities were collected from the local environmental protection agencies. To compare air quality data with epidemiological data, a statistical analysis was conducted identifying the correlation matrices of Pearson and Spearman, considering also the possible incubation period of the disease. Moreover, a model for the evaluation of the epidemic risk, already proposed in literature, was used to evaluate a possible influence of PM on CoViD-19 spread rapidity. The results exclude that PM alone was the primary cause of the high CoVid-19 spread rapidity in some areas of Northern Italy. Further developments are necessary for a better comprehension of the influence of atmospheric pollution parameters on the rapidity of spread of the virus SARS-CoV-2, since a synergistic action with other factors (such as meteorological, socio-economic and cultural factors) could not be excluded by the present study.

How to Produce an Alternative Carbon Source for Denitrification by Treating and Drastically Reducing Biological Sewage Sludge.

Minimizing the biological sewage sludge (BSS) produced by wastewater treatment plants (WWTPs) represents an increasingly difficult challenge. With this goal, tests on a semi-full scale Thermophilic Alternate Membrane Biological Reactor (ThAlMBR) were carried out for 12 months. ThAlMBR was applied both on thickened (TBSS) and digested biological sewage sludge (DBSS) with alternating aeration conditions, and emerged: (i) high COD removal yields (up to 90%), (ii) a low specific sludge production (0.02-0.05 kgVS produced/kgCODremoved), (iii) the possibility of recovery the aqueous carbon residue (permeate) in denitrification processes, replacing purchased external carbon sources. Based on the respirometric tests, an excellent biological treatability of the permeate by the mesophilic biomass was observed and the denitrification kinetics reached with the diluted permeate ((4.0 mgN-NO3-/(gVSS h)) were found comparable to those of methanol (4.4 mgN-NO3-/(gVSS h)). Moreover, thanks to the similar results obtained on TBSS and DBSS, ThAlMBR proved to be compatible with diverse sludge line points, ensuring in both cases an important sludge minimization.

Kinetics of Microcystin-LR Removal in a Real Lake Water by UV/H2O2 Treatment and Analysis of Specific Energy Consumption.

The hepatotoxin microcystin-LR (MC-LR) represents one of the most toxic cyanotoxins for human health. Considering its harmful effect, the World Health Organization recommended a limit in drinking water (DW) of 1 µg L-1. Due to the ineffectiveness of conventional treatments present in DW treatment plants against MC-LR, advanced oxidation processes (AOPs) are gaining interest due to the high redox potential of the OH• radicals. In this work UV/H2O2 was applied to a real lake water to remove MC-LR. The kinetics of the UV/H2O2 were compared with those of UV and H2O2 showing the following result: UV/H2O2 > UV > H2O2. Within the range of H2O2 tested (0-0.9 mM), the results showed that H2O2 concentration and the removal kinetics followed an increasing quadratic relation. By increasing the initial concentration of H2O2, the consumption of oxidant also increased but, in terms of MC-LR degraded for H2O2 dosed, the removal efficiency decreased. As the initial MC-LR initial concentration increased, the removal kinetics increased up to a limit concentration (80 µg L-1) in which the presence of high amounts of the toxin slowed down the process. Operating with UV fluence lower than 950 mJ cm-2, UV alone minimized the specific energy consumption required. UV/H2O2 (0.3 mM) and UV/H2O2 (0.9 mM) were the most advantageous combination when operating with UV fluence of 950-1400 mJ cm-2 and higher than 1400 mJ cm-2, respectively.

Evaluation of foaming potential for water treatment: limits and developments.

The critical issue generated by foaming in wastewater treatment plants (WWTPs) is a problem that is currently very common and shared, but which to date is treated mainly only at the management level. In this work, an experimental study with foam tests on real and synthetic waters was conducted using a laboratory scale plant and foaming power indices were calculated. To date, the estimation of foaming potential is mainly based on these indices which give information only on height/volume of foams but not on the type of foams, in terms of consistency and therefore stability. Tests showed that foaming power indices were highly variable with the same water: it was not possible to identify a single foaming potential value for each water. Two models were proposed to estimate the percentage increase in height of chemical foams produced following the introduction of air below the surface of a liquid. In terms of determination coefficient, the results obtained from the complex model were better: R2 was 0.82 for the simple linear model and 0.90 for the complex one. This approach has allowed to underline some critical aspects of foaming potential as it is determined today and the possible improvements applicable for a more objective evaluation.

Disinfection of Wastewater by UV-Based Treatment for Reuse in a Circular Economy Perspective. Where Are We at?

Among the critical issues that prevent the reuse of wastewater treatment plants (WWTPs) effluents in a circular economy perspective, the microbiological component plays a key role causing infections and diseases. To date, the use of conventional chemical oxidants (e.g., chlorine) represent the main applied process for wastewater (WW) disinfection following a series of operational advantages. However, toxicity linked to the production of highly dangerous disinfection by-products (DBPs) has been widely demonstrated. Therefore, in recent years, there is an increasing attention to implement sustainable processes, which can simultaneously guarantee the microbiological quality of the WWs treated and the protection of both humans and the environment. This review focuses on treatments based on ultraviolet radiation (UV) alone or in combination with other processes (sonophotolysis, photocatalysis and photoelectrocatalysis with both natural and artificial light) without the dosage of chemical oxidants. The strengths of these technologies and the most significant critical issues are reported. To date, the use of synthetic waters in laboratory tests despite real waters, the capital and operative costs and the limited, or absent, experience of full-scale plant management (especially for UV-based combined processes) represent the main limits to their application on a larger scale. Although further in-depth studies are required to ensure full applicability of UV-based combined processes in WWTPs for reuse of their purified effluents, excellent prospects are presented thanks to an absent environmental impact in terms of DBPs formation and excellent disinfection yields of microorganisms (in most cases higher than 3-log reduction).