RESUMO
The augmented exposure of both environment and human being to electromagnetic waves and the concomitant lack of an unequivocal knowledge about biological consequences of these radiations, raised public interest on electromagnetic pollution. In this context, the present study aims to evaluate the biological effects on zebrafish (ZF) embryos of 100â¯MHz radiofrequency electromagnetic field (RF-EMF) exposure through a multidisciplinary protocol. Because of the shared synteny between human and ZF genomes that validated its use in biomedical research, toxicology and developmental biology studies, ZF was here selected as experimental model and a measurement protocol and biological analyses have been set up to clearly discriminate between RF-EMF biological and thermal effects. The results showed that a 100â¯MHz EMF was able to affect ZF embryonic development, from 24 to 72â¯h post fertilization (hpf) in all the analyzed pathways. Particularly, at the 48 hpf stage, a reduced growth, an increased transcription of oxidative stress genes, the onset of apoptotic/autophagic processes and a modification in cholesterol metabolism were detected. ZF embryos faced stress induced by EMF radiation by triggering detoxification mechanisms and at 72 hpf they partially recovered from stress reaching the hatching time in a comparable way respect to the control group. Data here obtained showed unequivocally the in vivo effects of RF-EMF on an animal model, excluding thermal outcomes and thus represents the starting point for more comprehensive studies on dose response effects of electromagnetic fields radiations consequences.
Assuntos
Campos Eletromagnéticos/efeitos adversos , Embrião não Mamífero/efeitos da radiação , Desenvolvimento Embrionário/efeitos da radiação , Ondas de Rádio/efeitos adversos , Contaminação Radioativa da Água/efeitos adversos , Peixe-Zebra/embriologia , Animais , Apoptose/efeitos da radiação , Autofagia/efeitos da radiação , Colesterol/metabolismo , Embrião não Mamífero/metabolismo , Embrião não Mamífero/patologia , Humanos , Estresse Oxidativo/efeitos da radiaçãoRESUMO
The aim of this paper is to present the main results of HDOMO, an Ambient Assisted Living (AAL) project that involved 16 Small and Medium Enterprises (SMEs) and 2 research institutes. The objective of the project was to create an autonomous and automated domestic environment, primarily for elderly people and people with physical and motor disabilities. A known and familiar environment should help users in their daily activities and it should act as a virtual caregiver by calling, if necessary, relief efforts. Substantially, the aim of the project is to simplify the life of people in need of support, while keeping them autonomous in their private environment. From a technical point of view, the project provides the use of different Smart Objects (SOs), able to communicate among each other, in a cloud base infrastructure, and with the assisted users and their caregivers, in a perspective of interoperability and standardization of devices, usability and effectiveness of alarm systems. In the state of the art there are projects that achieve only a few of the elements listed. The HDOMO project aims to achieve all of them in one single project effectively. The experimental trials performed in a real scenario demonstrated the accuracy and efficiency of the system in extracting and processing data in real time to promptly acting, and in providing timely response to the needs of the user by integrating and confirming main alarms with different interoperable smart sensors. The article proposes a new technique to improve the accuracy of the system in detecting alarms using a multi-SO approach with information fusion between different devices, proving that this architecture can provide robust and reliable results on real environments.
Assuntos
Atividades Humanas , Idoso , HumanosRESUMO
Sport is one of the best ways to promote the social integration of people affected by physical disability, because it helps them to increase their self-esteem by facing difficulties and overcoming their disabilities. Nowadays, a large number of sports can be easily played by visually impaired and blind athletes without any special supports, but, there are some disciplines that require the presence of a sighted guide. In this work, the attention will be focused on marathons, during which athletes with visual disorders have to be linked to the sighted guide by means of a non-stretchable elbow tether, with an evident reduction of their performance and autonomy. In this context, this paper presents a fixed electromagnetic infrastructure to equip a standard running racetrack in order to help a blind athlete to safely run without the presence of a sighted guide. The athlete runs inside an invisible hallway, just wearing a light and a comfortable sensor unit. The patented system has been homemade, designed, realized and finally tested by a blind Paralympic marathon champion with encouraging results and interesting suggestions for technical improvements. In this paper (Part I), the transmitting unit, whose main task is to generate the two magnetic fields that delimit the safe hallway, is presented and discussed.
Assuntos
Cegueira , Atletas , Fenômenos Eletromagnéticos , Humanos , Corrida , Pessoas com Deficiência VisualRESUMO
Currently, the availability of technology developed to increase the autonomy of visually impaired athletes during sports is limited. The research proposed in this paper (Part I and Part II) focuses on the realization of an electromagnetic system that can guide a blind runner along a race track without the need for a sighted guide. In general, the system is composed of a transmitting unit (widely described in Part I) and a receiving unit, whose components and main features are described in this paper. Special attention is paid to the definition of an electromagnetic model able to faithfully represent the physical mechanisms of interaction between the two units, as well as between the receiving magnetic sensor and the body of the user wearing the device. This theoretical approach allows for an estimation of the signals to be detected, and guides the design of a suitable signal processing board. This technology has been realized, patented, and tested with a blind volunteer with successful results and this paper presents interesting suggestions for further improvements.
Assuntos
Corrida , Atletas , Cegueira , Fenômenos Eletromagnéticos , Humanos , Pessoas com Deficiência Visual , Dispositivos Eletrônicos VestíveisRESUMO
Nowadays the technologies aimed at improving the quality of life of people affected by visual diseases are quite common; e.g., devices to support walking or reading. Surprisingly, there is a lack of innovative technologies aimed at helping visually impaired athletes during physical activities. An example is represented by blind runners who need to be physically linked to a sighted guide by means of non-stretchable tethers during races; with consequent limitations in terms of performance and independence. This paper wants to investigate the possibility of realizing a system able to guide blind runners along a complex path, paving the way for the realization of an innovative device designed to improve their independence during training or competitions. The system consists of: (1) a mobile unit, which is placed before the runner and generates two "electromagnetic walls" delimiting the way; (2) a receiving unit (worn by the athlete) that provides vibro-tactile warnings every time the user is going outside the safe area so as to encourage him to move toward the central position. The feasibility and the utility of the system proposed are demonstrated by means of tests carried out thanks to the collaboration of a blind volunteer.
Assuntos
Cegueira/fisiopatologia , Campos Eletromagnéticos , Desenho de Equipamento , Corrida , HumanosRESUMO
The use of a UWB system for sensing breathing activity of astronauts must account for many critical issues specific to the space environment. The aim of this paper is twofold. The first concerns the definition of design constraints about the pulse amplitude and waveform to transmit, as well as the immunity requirements of the receiver. The second issue concerns the assessment of the procedures and the characteristics of the algorithms to use for signal processing to retrieve the breathing frequency and respiration waveform. The algorithm has to work correctly in the presence of surrounding electromagnetic noise due to other sources in the environment. The highly reflecting walls increase the difficulty of the problem and the hostile scenario has to be accurately characterized. Examples of signal processing techniques able to recover breathing frequency in significant and realistic situations are shown and discussed.
Assuntos
Astronautas , Monitorização Fisiológica/métodos , Respiração , Simulação por Computador , Eletricidade , Fenômenos Eletromagnéticos , Meio Ambiente Extraterreno , Análise de Fourier , Humanos , Metais , Processamento de Sinais Assistido por Computador , Software , Tórax/fisiologia , Fatores de Tempo , Análise de OndaletasRESUMO
In spite of all the developments in dental implantology techniques, peri-implant diseases are frequent (prevalence up to 80% and 56% of subjects for mucositis and peri-implantitis, respectively) and there is an urgency for an effective treatment strategy. This paper presents an innovative electromedical device for the electromagnetic treatment of mucositis and peri-implantitis diseases. This device is also equipped with a measurement part for bioimpedance, which reflects the health conditions of a tissue, thus allowing clinicians to objectively detect impaired areas and to monitor the severity of the disease, evaluate the treatment efficacy, and adjust it accordingly. The design of the device was realized considering literature data, clinical evidence, numerical simulation results, and electromagnetic compatibility (EMC) pre-compliance tests, involving both clinicians and engineers, to better understand all the needs and translate them into design requirements. The reported system is being tested in more than 50 dental offices since 2019, providing efficient treatments for mucositis and peri-implantitis, with success rates of approximately 98% and 80%, respectively.
RESUMO
In dentistry possible inflammatory episodes of oral cavity can be very frequent (periodontitis, mucositis, peri-implantitis) and they can have serious consequences. Indeed, peri-implantitis is still the principal cause of implant failure. Impedance values of biological tissues are related to the physiological/pathological state of the tissue itself. In fact, an inflamed site exhibits an impedance value lower than that of the corresponding healthy tissue. Based on these observations, the aim of this work is to determine if impedancemetric measurements are able to provide information about the inflammatory state of tissues. A numerical 3D model has been realized to simulate the measurement conditions present in the event of inflammation around a dental implant. The aim is to understand if it is possible to determine the presence of an inflamed tissue and to locate its site, so that the treatment could be specifically focused in that specific area. A simplified geometry reproducing the implant has been realized in order to validate the numerical model by means of experimental measurements. The obtained results are satisfactorily accurate, so the model can be considered reliable. Therefore, multiple simulations have been run on the original model to carry out a parametric study in terms of different conductivity values, different volumes of inflamed tissues and different measurement frequencies. The advantages and limits of such a method have been shown to properly define the main constraints for the system design.
Assuntos
Impedância Elétrica , Inflamação/patologia , Análise Numérica Assistida por Computador , Periodontite/patologia , Simulação por Computador , Eletricidade , Eletrodos , Estudos de Viabilidade , Gengiva/patologia , Humanos , Modelos Teóricos , Reprodutibilidade dos TestesRESUMO
The aim of the paper is the development of an accurate numerical model to compute the current density flowing through the heart of a virtual human body, and induced by an external electric or magnetic excitation. The model has been experimentally validated and then applied to investigate the main characteristics of the heart magnetic stimulation. This has been carried out by comparing the current density induced in the cardiac region by an external magnetic pulse with the corresponding quantity due to the more traditional electric source. Magnetic stimulation is studied because it offers some advantages: in fact, compared with the electrical stimulation, this technique is contactless and might allow the stimulation of a dressed patient. The design constraint of the whole system is represented by the current density, whose waveform and intensity are a compromise between the strength of the magnetic induction field and the pulse rise time.