Performance, microbial community and inhibition kinetics of long-term Cu2+ stress on an air-lift nitritation reactor with self-recirculation.

Biological nitrogen removal process could be affected due to the presence of heavy metals owing to their toxicity and accumulation in the sludge. In this study, the impact of Cu2+ shock on a long-term nitritation operation was investigated in an air-lift reactor with self-recirculation. Both the dynamics of microbial community and inhibition kinetics under Cu2+ stress were ascertained. The results showed that Cu2+ exerted severe inhibition on nitritation performance of an air-lift reactor (ALR) at 25 mg/L. The corresponding NH4+-N removal efficiency decreased to below 50%, which was mainly due to the variation of microbial community structure, especially the inhibition of nitrifiers like Nitrosomonas (the relative abundance decreased from 30% to 1% after Cu2+ inhibition). Kinetic parameters were obtained and compared after fitting the Haldane model. The long-term Cu2+ stress on the ALR aggravated the ammonium affinity and the resistance to substrate self-inhibition of the nitritation sludge, but reduced the resistance to Cu2+ inhibition. Furthermore, Cu2+ acted as uncompetitive inhibitor on nitritation process. Our results provide new insights into the nitritation characteristics under long-term Cu2+ stress.

The Potential Use of Vetiveria zizanioides for the Phytoremediation of Antimony, Arsenic and Their Co-Contamination.

Antimony (Sb) and arsenic (As) contaminations are the well reported and alarming issues of various contaminated smelting and mining sites all over the world, especially in China. The present hydroponic study was to assess the capacity of Vetiveria zizanioides for Sb, As and their interactive accumulations. The novelty of the present research is this that the potential of V. zizanioides for Sb and As alone and their interactive accumulation are unaddressed. This is the first report about the interactive co-accumulation of Sb and As in V. zizanioides. Highest applied Sb and As contaminations significantly inhibited the plant growth. Applied Sb and As alone significantly increased their concentrations in the roots/shoot of V. zizanioides. While co-contamination of Sb and As steadily increased their concentrations, in the plant. The co-contamination of Sb and As revealed a positive correlation between the two, as they supplemented the uptake and accumulation of each other. The overall translocation (TF) and bioaccumulation factors (BF) of Sb in V. zizanioides, were 0.75 and 4. While the TF and BF of As in V. zizanioides, were 0.86 and 10. V. zizanioides proved as an effective choice for the phytoremediation and ecosystem restoration of Sb and As contaminated areas.

Enhanced short-cut nitrification in an airlift reactor by CaCO3 attachment on biomass under high bicarbonate condition.

The short-cut nitrification (SCN) performance of an airlift reactor (ALR) was investigated under increasing bicarbonate condition. The sequential increase of bicarbonate from 2.5 to 7.0 g/L accelerated the nitrite accumulation and improved the NAP to 99 %. With the increase of bicarbonate dose to 11 g/L, the ammonium removal efficiency and the ammonium removal rate (ARR) were improved to 95.1 % and 0.57 kg/m(3)/day, respectively. However, the elevation of bicarbonate concentration from 11.0 to 14.0 g/L gradually depreciated the nitrite accumulation percentage to 62.5 %. Then, the reactor was operated in increasing ammonium strategy to increase the nitrogen loading rate (NLR) to 1.1 kg/m(3)/day under 700 mg/L influent ammonium concentration. The ARR and nitrite production rate were elevated to 1.1 and 0.9 kg/m(3)/day, respectively. The SCN performance was improved to 1.8 kg/m(3)/day (NLR) by the subsequent progressive shortening of HRT to 4.8 h at ammonium concentration of 350 mg/L, which was 1.6 times higher than that of the increasing ammonium strategy. Chemical analysis with EDS, FTIR and XRD confirmed the presence of CaCO3 precipitates on biomass surface during the long-term operation under high bicarbonate conditions. The attachment of precipitates to the SCN sludge helped to improve the biomass settleability and finally enhanced the SCN performance of the ALR.

Co-treatment of gypsum sludge and Pb/Zn smelting slag for the solidification of sludge containing arsenic and heavy metals.

Wastewater treatment sludge from a primary lead-zinc smelter is characterized as hazardous waste and requires treatment prior to disposal due to its significant arsenic and heavy metals contents. This study presents a method for the stabilization of arsenic sludge that uses a slag based curing agent composed of smelting slag, cement clinker and limestone. The Unconfined Compressive Strength (UCS) test, the China Standard Leaching Test (CSLT), and the Toxicity Characteristic Leaching Procedures (TCLP) were used to physically and chemically characterize the solidified sludge. The binder ratio was determined according to the UCS and optimal experiments, and the optimal mass ratio of m (smelting slag): m (cement clinker): m (gypsum sludge): m (limestone) was 70:13:12:5. When the binder was mixed with arsenic sludge using a mass ratio of 1:1 and then maintained at 25 °C for 28 d, the UCS reached 9.30 MPa. The results indicated that the leached arsenic content was always less than 5 mg/L, which is a safe level, and does not contribute to recontamination of the environment. The arsenic sludge from the Zn/Pb metallurgy plant can be blended with cement clinker and smelting slag materials for manufacturing bricks and can be recycled as construction materials.

Depolymerization and decolorization of kraft lignin by bacterium Comamonas sp. B-9.

There is no commercial or industrial-scale process for the remediation of black liquor using microorganisms to date. One of the most important causes is that most microorganisms are not able to use lignin as their principal metabolic carbon or energy source. The bacterial strain Comamonas sp. B-9 has shown remarkable ability to degrade kraft lignin and decolorize black liquor using lignin as its principal metabolic carbon and energy source. This report looks at the depolymerization and decolorization of kraft lignin by Comamonas sp. B-9. The degradation, decolorization, and total carbon removal reached 45, 54, and 47.3%, respectively, after 7 days treatment. Comamonas sp. B-9 was capable of depolymerizing kraft lignin effectively as analyzed by gel permeation chromatography and decolorization via degrading benzene ring structures as shown using Fourier transform infrared spectroscopy analysis.

Enhanced remediation of black liquor by activated sludge bioaugmented with a novel exogenous microorganism culture.

Black liquor (BL) is a notoriously difficult wastewater to treat due to the economic and efficiency limitations of physiochemical methods and intrinsic difficulties with bioremediation strategies caused by the high pH (10-13) and lignin content. This study investigated the feasibility of a novel bioaugmentation strategy for BL treatment, which uses a mixed microorganism culture of lignocellulose-degrading microorganisms isolated from degraded bamboo slips. Black liquor treatment was assessed in terms of chemical oxygen demand (COD) and color removal with a sequencing batch reactor organic loading rate of 9 kg COD/L·day under highly alkaline conditions (pH 10). Results revealed that bioaugmented activated sludge treatment of BL with special mixed microorganisms significantly enhanced the removal efficiency of COD, color, and lignin from the wastewater up to 64.8, 50.5, and 53.2 %, respectively. Gel permeation chromatography profiles showed that the bioaugmentation system could successfully degrade high molecular lignin fragments in black liquor. This work confirms bioaugmentation as a feasible alternative strategy for enhanced biological treatment of wastewater with high lignin content and high organic load rate under strongly alkaline conditions.

catena-Poly[[[diaqua-nickel(II)]-µ-pyrazine-2-carboxyl-ato-silver(I)-µ-pyrazine-2-carboxyl-ato] nitrate dihydrate].

In the polymeric complex of the title compound, {[AgNi(C(5)H(3)N(2)O(2))(2)(H(2)O)(2)]NO(3)·2H(2)O}(n), the Ag(I) ion displays an angular coordination geometry with two N atoms from pyrazine-2-carboxyl-ate ligands, and the Ni(II) ion is hexa-coordinated by two O atoms from two water mol-ecules, two O and two N atoms from pyrazine-2-carboxyl-ate ligands in a distorted octa-hedral geometry. In the crystal, the Ag(I) and Ni(II) ions lie on a mirror plane and an inversion centre, respectively. The complex chains, the nitrate ions and the uncoordinated water mol-ecules are linked together through O-H⋯O hydrogen bonds and weak Ag⋯O inter-actions [2.619 (17)-2.749 (17) Å] into a three-dimensional network.

[Study of Raman and IR spectra for Si-Al-Zr-O amorphous bulk in-situ crystallization].

The structural changes in the in-situ controlled crystallizing process of Si-Al-Zr-O(SAZ) amorphous bulk were investigated by laser Raman (LRa), infrared (IR) and X-ray diffraction (XRD) techniques. The structure of the amorphous network apparently reorganized at about 920 degrees C, resulting in the formation of Si-rich and Al, Zr-rich regions. The t-ZrO2 was crystallized from the Zr-rich region at 920-950 degrees C and poorly defined Al-Si spinel was formed from the Al-rich regions. With the increase in temperature, the peak of Al-Si spinel was enhanced and then disappeared in the XRD pattern, and the characteristic IR band groups of mullite centered in the 1 200-1 100, 1 000-700 and 650-400 cm(-1) could be observed. At 1 100-1 150 degrees C, the Raman bands at 179 and 193 cm(-1) typical for the m-ZrO2 occurred and cristobalite was detected, and the main crystalline phases were identified as t-ZrO2 and mullite. These results indicated that mullite was formed by reaction between amorphous silica and the Al-Si spinel which was metastable phase. During the heating process, t-ZrO2 was crystallized firstly and a portion was transformed to m-ZrO2 at high temperature, and the left amorphous silica was transformed to cristobalite.

The long-term effects of hexavalent chromium on anaerobic ammonium oxidation process: Performance inhibition, hexavalent chromium reduction and unexpected nitrite oxidation.

The toxicity of hexavalent chromium (Cr(VI)) is one of the challenges in implementing Anammox process to ammonium-rich wastewater treatment. However, the response of Anammox process to Cr(VI) stress and the inhibition mechanism remain unclear. Here, two Anammox UASB reactors were operated for 285 days under different Cr(VI) stresses. The results showed Anammox performance was not affected at low Cr(VI) concentration (i.e., 0-0.5 mg L-1), but was severely inhibited at 0.8 mg L-1. Attempts to domesticate Anammox process to higher Cr(VI) by lowering nitrogen loading rate were failed. Examination of Cr(VI) fate showed the occurrence of extracellular and intracellular Cr(VI) reduction to Cr(III). The inhibition was ascribed to the significant intracellular Cr(VI) reduction, accounting for 99.78% of the total Cr(VI) reduction. Moreover, under long-term Cr(VI) exposure, most nitrite was oxidized to nitrate. But microbial community showed no enrichment of Cr(VI) reducing bacteria and other nitrogen transformation-related bacteria.

The application of aged refuse in nitrification biofilter: Process performance and characterization.

High adsorption capacity, good biocompatibility and low cost are highly demanded for biofilter used in ammonium-rich wastewater treatment. In this study, we used SEM, BET, XRD and 16S rRNA to document the evidence for good performance in adsorption and biodegradation in aged refuse. Parallel experiment between raw and inert refuse showed ammonium adsorption occurred at the initial week, with the highest ammonium removal efficiency of 90.36%, but saturated during the subsequent long-term operation. Meanwhile, over 6months' operation of an aged refuse biofilter was conducted to confirm that nitrification was the main pathway of ammonium conversion. The maximum nitrogen loading rate could reach up to as high as 1.28kg/m3/d, with ammonium removal efficiency at 99%. Further, high nitrifier biodiversity were detected with 'Nitrosomonas' and 'Nitrospira' in domination in the refuse. However, Nitrospira would outcompete Nitrosomonas under the oxygen limiting condition and resulted in the failure of partial nitrification. The physicochemical and biological analysis show that biodegradation is the main ammonium conversion pathway, which is the critical finding of this work. This investigation would help to accelerate the application of the aged refuse process in ammonium-rich wastewater treatment.

Study of arsenic(V) adsorption on bone char from aqueous solution.

Arsenic is a toxic element and may be found in natural waters as well as in industrial waters. Leaching of arsenic from industrial wastewater into groundwater may cause significant contamination, which requires proper treatment before its use as drinking water. The present study described the removal of As(V) on bone char in batch studies conducted as a function of pH, dosage of adsorbent, and contact time. Kinetics revealed that uptake of As(V) ion by bone char was very rapid in the first 30min and equilibrium time was independent of initial As(V) concentration. And the adsorption process followed a first-order kinetics equation. The arsenic removal was strongly dependent on pH and dosage of adsorbent. Fourier transform infrared spectra of bone char before and after As(V) adsorption demonstrated that Ca-OH functional group plays an important role for As(V) ions removal, and the mechanisms of the removal of As(V) on bone char was complex mechanism where both co-precipitation and ion exchange. The results suggested that bone char can be used effectively for the removal of As(V) ion from aqueous solution.

Insights into the role of extracellular polymeric substances in Zn2+ adsorption in different biological sludge systems.

The adsorption behavior of Zn2+ in four different biological sludge systems, i.e. activated sludge, denitrification sludge, short-cut nitrification sludge, and anammox granules, was investigated. The results indicated that all sludge samples possessed considerable potential for Zn2+ adsorption. Short-cut nitrification sludge possessed the highest Zn2+ maximum adsorption capacity (qm) of 36.4 mg g SS-1, which was much higher than other sludges applied (12.8-14.7 mg g SS-1). Besides, the adsorption rate for short-cut nitrification sludge was fastest among the four types of sludge after fitting with a pseudo-second-order rate equation. Comparing with the physicochemical properties of the four sludges, the soluble extracellular polymeric substances (EPS), especially soluble polysaccharide (PS), played a prior role in binding metal cations (i.e., Zn). The present study also showed that with less than 30% of Zn2+ trapped by EPS, 61.6-71.9% of Zn2+could be harvested directly by cells, indicating that the protecting capability by EPS was limited. Therefore, it is important to remove metal ions as early as possible if the activated sludge processes encountered high stress of heavy metal. Graphical abstract ᅟ.

Co-treatment of flotation waste, neutralization sludge, and arsenic-containing gypsum sludge from copper smelting: solidification/stabilization of arsenic and heavy metals with minimal cement clinker.

Flotation waste of copper slag (FWCS), neutralization sludge (NS), and arsenic-containing gypsum sludge (GS), both of which are difficult to dispose of, are major solid wastes produced by the copper smelting. This study focused on the co-treatment of FWCS, NS, and GS for solidification/stabilization of arsenic and heavy metals with minimal cement clinker. Firstly, the preparation parameters of binder composed of FWCS, NS, and cement clinker were optimized to be FWCS dosage of 40%, NS dosage of 10%, cement clinker dosage of 50%, mill time of 1.5 h, and water-to-binder ratio of 0.25. On these conditions, the unconfined compressive strength (UCS) of the binder reached 43.24 MPa after hydration of 28 days. Then, the binder was used to solidify/stabilize the As-containing GS. When the mass ratio of binder-to-GS was 5:5, the UCS of matrix can reach 11.06 MPa after hydration of 28 days, meeting the required UCS level of MU10 brick in China. Moreover, arsenic and other heavy metals in FWCS, NS, and GS were effectively solidified or stabilized. The heavy metal concentrations in leachate were much lower than those in the limits of China standard leaching test (CSLT). Therefore, the matrices were potential to be used as bricks in some constructions. XRD analysis shows that the main hydration products of the matrix were portlandite and calcium silicate hydrate. These hydration products may play a significant role in the stabilization/solidification of arsenic and heavy metals.

Utilization of red mud and Pb/Zn smelter waste for the synthesis of a red mud-based cementitious material.

A new method in which Pb/Zn smelter waste containing arsenic and heavy metals (arsenic sludge), red mud and lime are utilized to prepare red mud-based cementitious material (RCM) is proposed in this study. XRD, SEM, FTIR and unconfined compressive strength (UCS) tests were employed to assess the physicochemical properties of RCM. In addition, ettringite and iron oxide-containing ettringite were used to study the hydration mechanism of RCM. The results show that the UCS of the RCM (red mud+arsenic sludge+lime) was higher than that of the binder (red mud+arsenic sludge). When the mass ratio of m (binder): m (lime) was 94:6 and then maintained 28days at ambient temperature, the UCS reached 12.05MPa. The red mud has potential cementitious characteristics, and the major source of those characteristics was the aluminium oxide. In the red mud-arsenic sludge-lime system, aluminium oxide was effectively activated by lime and gypsum to form complex hydration products. Some of the aluminium in ettringite was replaced by iron to form calcium sulfoferrite hydrate. The BCR and leaching toxicity results show that the leaching concentration was strongly dependent on the chemical speciation of arsenic and the hydration products. Therefore, the investigated red mud and arsenic sludge can be successfully utilized in cement composites to create a red mud-based cementitious material.

Designing High-Performance Composite Electrodes for Vanadium Redox Flow Batteries: Experimental and Computational Investigation.

Highly catalytic electrodes play a vital role in exploiting the capability of vanadium redox flow batteries (VRFBs), but they suffer from a tedious synthesis process and ambiguous interaction mechanisms for catalytic sites. Herein, a facile urea pyrolysis process was applied to prepare graphitic carbon nitride-modified graphite felt (GF@CN), and by the virtue of a density functional theory-assisted calculation, the electron-rich pyridinic nitrogen atom of CN granules is demonstrated as the adsorption center for redox species and plays the key role in improving the performance of VRFBs, with 800 cycles and an energy efficiency of 75% at 150 mA cm-2. Such experimental and computational collaborative investigations guide a realizable and cost-effective solution for other high-power flow batteries.

Corrigendum to "Start-Up Characteristics of a Granule-Based Anammox UASB Reactor Seeded with Anaerobic Granular Sludge".

[This corrects the article DOI: 10.1155/2013/396487.].

Revegetation of extremely acid mine soils based on aided phytostabilization: A case study from southern China.

Acidification is a major constraint for revegetation of sulphidic metal-contaminated soils, as exemplified by the limited literature reporting the successful phytostabilization of mine soils associated with pH<3 and high acidification potential. In this study, a combination of ameliorants (lime and chicken manure) and five acid-tolerant plant species has been employed in order to establish a self-sustaining vegetation cover on an extremely acid (pH<3) polymetallic pyritic mine waste heap in southern China exhibiting high acidification potential. The results from the first two-year data showed that the addition of the amendments and the establishment of a plant cover were effective in preventing soil acidification. Net acid-generating potential of the mine soil decreased steadily, whilst pH and acid neutralization capacity increased over time. All the five acid-tolerant plants colonized successfully in the acidic metal-contaminated soil and developed a good vegetation cover within six months, and subsequent vegetation development enhanced organic matter accumulation and nutrient element status in the mine soil. The two-year remediation program performed on this extremely acid metalliferous soil indicated that aided phytostabilization can be a practical and effective restoration strategy for such extremely acid mine soils.

Growth, photosynthesis, and defense mechanism of antimony (Sb)-contaminated Boehmeria nivea L.

Ramie (Boehmeria nivea L.) is the oldest cash fiber crop in China and is widely grown in antimony (Sb) mining areas. To evaluate the extent of Sb resistance and tolerance, the growth, tolerance index (TI), Sb content in plant parts and in Hoagland solution, bioaccumulation factor (BF), photosynthesis, and physiological changes in Sb-contaminated B. nivea (20, 40, 80, and 200 mg L(-1) Sb) grown hydroponically were investigated. The Sb tolerance and resistance of ramie were clearly revealed by growth inhibition, a TI between 13 and 99 %, non-significant changes in the maximum quantum efficiency of photosystem (F v /F m ), energy-harvesting efficiency (photosystem II (PSII)) and single-photon avalanche diode (SPAD) value, a significant increase in Sb in plant parts, BF >1, and an increase in catalase (CAT) and malondialdehyde (MDA) at 200 mg L(-1) Sb. Under increasing Sb stress, nearly the same non-significant decline in the maximum quantum efficiency of photosystem (F v /F m ), energy-harvesting efficiency (PSII), relative quantum yield of photosystem II (φPSII), and photochemical quenching (qP), except for F v /F m at 20 mg L(-1) Sb, were recorded. SPAD values for chlorophyll under Sb stress showed an increasing trend, except for a slight decrease, i.e., <2 %, than the control SPAD value at 200 mg L(-1) Sb. With a continuous increase in MDA, superoxide dismutase (SOD), peroxidase (POD), and CAT activities were suppressed under Sb addition up to 40 mg L(-1) Sb and the addition of Sb enhanced enzyme production at 80 and 200 mg L(-1) Sb. A continuous decrease in SOD, POD, and CAT up to 40 mg L(-1) Sb and enhancements at ≥80 mg L(-1), along with the continuous enhancement of MDA activity and inhibited biomass production, clearly reveal the roles of these enzymes in detoxifying Sb stress and the defense mechanism of ramie at 80 mg L(-1) Sb. Thus, B. nivea constitutes a promising candidate for Sb phytoremediation at mining sites.

Comparative evaluation of short-term stress of Cd(II), Hg(II), Pb(II), As(III) and Cr(VI) on anammox granules by batch test.

Batch experiments were conducted to investigate the short-term effects of Cd(II), Hg(II), Pb(II), As(III) and Cr(VI) on anammox activity, which are considered to be the top 5 toxic heavy metals in China. The IC50 values of Cd(II), Hg(II), Pb(II) and Cr(VI) were calculated to be 7.00, 2.33, 10.40 and 9.84 mg/L, respectively, while As(III) caused only 29.67% decrease in SAA even at the dosage of 60 mg/L. The evaluation of metal concentrations in liquid and sludge revealed that anammox biomass hold a high heavy-metal accumulation ability, which was hypothesized to be the key reason of activity inhibition. The functional groups possessed by anammox biomass and the extracellular polymeric substance (EPS) might contribute to the attachment of heavy metals. Especially, microbial reduction of Cr(VI) to Cr(III) inside the granules was discovered, which was considered to relieve the Cr(VI) inhibition under concentrations lower than 8.96 mg/L.

Biochemical and Metabolic Changes in Arsenic Contaminated Boehmeria nivea L.

Arsenic (As) is identified by the EPA as the third highest toxic inorganic contaminant. Almost every 9th or 10th human in more than 70 countries including mainland China is affected by As. Arsenic along with other toxins not only affects human life but also creates alarming situations such as the deterioration of farm lands and desertion of industrial/mining lands. Researchers and administrators have agreed to opt for phytoremediation of As over costly cleanups. Boehmeria nivea L. can soak up various heavy metals, such as Sb, Cd, Pb, and Zn. But the effect of As pollution on the biology and metabolism of B. nivea has been somewhat overlooked. This study attempts to evaluate the extent of As resistance, chlorophyll content, and metabolic changes in As-polluted (5, 10, 15, and 20 mg L(-1) As) B. nivea in hydroponics. Toxic effects of As in the form of inhibited growth were apparent at the highest level of added As. The significant changes in the chlorophyll, electrolyte leakage, and H2O2, significant increases in As in plant parts, catalase (CAT), and malondialdehyde (MDA), with applied As revealed the potential of B. nivea for As decontamination. By employing the metabolic machinery of B. nivea, As was sustainably removed from the contaminated areas.