Safety and efficacy of dual-axis rotational coronary angiography vs. standard coronary angiography.

OBJECTIVE: To determine the safety and efficacy of dual-axis rotational coronary angiography (DARCA) by directly comparing it to standard coronary angiography (SA). BACKGROUND: Standard coronary angiography (SA) requires numerous fixed static images of the coronary tree and has multiple well-documented limitations. Dual-axis rotational coronary angiography (DARCA) is a new rotational acquisition technique that entails simultaneous LAO/RAO and cranial/caudal gantry movement. This technological advancement obtains numerous unique images of the left or right coronary tree with a single coronary injection. We sought to assess the safety and efficacy of DARCA as well as determine DARCA's adequacy for CAD screening and assessment. METHODS: Thirty patients underwent SA following by DARCA. Contrast volume, radiation dose (DAP) and procedural time were recorded for each method to assess safety. For DARCA acquisitions, blood pressure (BP), heart rate (HR), symptoms and any arrhythmias were recorded. All angiograms were reviewed for CAD screening adequacy by two independent invasive cardiologists. RESULTS: Compared to SA, use of DARCA was associated with a 51% reduction in contrast, 35% less radiation exposure, and 18% shorter procedural time. Both independent reviewers noted DARCA to be at least equivalent to SA with respect to the ability to screen for CAD. CONCLUSION: DARCA represents a new angiographic technique which is equivalent in terms of image quality and is associated with less contrast use, radiation exposure, and procedural time than SA.

Rotational vs. standard coronary angiography: an image content analysis.

OBJECTIVE: To evaluate the clinical utility of images acquired from rotational coronary angiographic (RA) acquisitions compared to standard "fixed" coronary angiography (SA). BACKGROUND: RA is a novel angiographic modality that has been enabled by new gantry systems that allow calibrated automatic angiographic rotations and has been shown to reduce radiation and contrast exposure compared to SA. RA provides a dynamic multiple-angle perspective of the coronaries during a single contrast injection. METHODS: The screening adequacy, lesion assessment, and a quantitative coronary analysis (QCA) of both SA and RA were compared by independent blinded review in 100 patients with coronary artery disease (CAD). RESULTS: SA and RA recognize a similar total number of lesions (P = 0.61). The qualitative assessment of lesion characteristics and severity between modalities was comparable and lead to similar clinical decisions. Visualization of several vessel segments (diagonal, distal RCA, postero-lateral branches and posterior-descending) was superior with RA when compared to SA (P < 0.05). A QCA comparison (MLD, MLA, LL, % DS) revealed no difference between SA and RA. The volume of contrast (23.5 +/- 3.1 mL vs. 39.4 +/- 4.1; P = 0.0001), total radiation exposure (27.1 +/- 4 vs. 32.1 +/- 3.8 Gycm(2); P = 0.002) and image acquisition time (54.3 +/- 36.8 vs. 77.67 +/- 49.64 sec; P = 0.003) all favored RA. CONCLUSION: Coronary lesion assessment, coronary screening adequacy, and QCA evaluations are comparable in SA and RA acquisition modalities in the diagnosis of CAD however RA decreases contrast volume, image acquisition time, and radiation exposure.

In vivo 3D modeling of the femoropopliteal artery in human subjects based on x-ray angiography: methodology and validation.

Endovascular revascularization of the femoropopliteal (FP) artery has been limited by high rates of restenosis and stent fracture. The unique physical forces that are applied to the FP artery during leg movement have been implicated in these phenomena. The foundation for measuring the effects of physical forces on the FP artery in a clinically relevant environment is based on the ability to develop 3D models of this vessel in different leg positions in vivo in patients with peripheral arterial disease (PAD). By acquiring paired angiographic images of the FP artery, and using angiography-based 3D modeling algorithms previously validated in the coronary arteries, the authors generated 3D models of ten FP arteries in nine patients with PAD with the lower extremity in straight leg (SL) and crossed leg (CL) positions. Due to the length of the FP artery, overlapping paired angiographic images of the entire FP artery were required to image the entire vessel, which necessitated the development of a novel fusion process in order to generate a 3D model of the entire FP artery. The methodology of angiographic acquisition and 3D model generation of the FP artery is described. In a subset of patients, a third angiographic view (i.e., validation view) was acquired in addition to the standard paired views for the purpose of validating the 3D modeling process. The mean root-mean-square (rms) error of the point-to-point distances between the centerline of the main FP artery from the 2D validation view and the centerline from the 3D model placed in the validation view for the SL and CL positions were 0.93 +/- 0.19 mm and 1.12 +/- 0.25 mm, respectively. Similarly, the mean rms error of the same comparison for the main FP artery and sidebranches for the SL and CL positions were 1.09 +/- 0.38 mm and 1.21 +/- 0.25 mm, respectively. A separate validation of the novel fusion process was performed by comparing the 3D model of the FP artery derived from fusion of 3D models of adjacent FP segments with the 2D validation view incorporating the region of fusion. The mean rms error of vessel centerline points of the main FP artery, the main FP artery plus directly connected sidebranches, and the mean rms error of upstream, downstream, and sidebranch directional vectors at bifurcation points in the overlap region were 1.41 +/- 0.79 mm, 2.13 +/- 1.12 mm, 3.16 +/- 3.72 degrees, 3.60 +/- 5.39 degrees, and 8.68 +/- 8.42 degrees in the SL position, respectively, and 1.29 +/- 0.35 mm, 1.61 +/- 0.78 mm, 4.68 +/- 4.08 degrees, 3.41 +/- 2.23 degrees, and 5.52 +/- 4.41 degrees in the CL position, respectively. Inter- and intraobserver variability in the generation of 3D models of individual FP segments and the fusion of overlapping FP segments were assessed. The mean rms errors between the centerlines of nine 3D models of individual FP segments generated by two independent observers, and repeated measurement by the same observer were 2.78 +/- 1.26 mm and 3.50 +/- 1.15 mm, respectively. The mean rms errors between the centerline of four 3D models of fused overlapping FP segments generated by two independent observers, and repeated measurement by the same observer were 4.99 +/- 0.99 mm and 5.98 +/- 1.22 mm, respectively. This study documents the ability to generate 3D models of the entire FP artery in vivo in patients with PAD in both SL and CL positions using routine angiography, and validates the methodologies used.

Use of short roll C-arm computed tomography and fully automated 3D analysis tools to guide transcatheter aortic valve replacement.

Determination of the coplanar view is a critical component of transcatheter aortic valve replacement (TAVR). The safety and accuracy of a novel reduced angular range C-arm computed tomography (CACT) approach coupled with a fully automated 3D analysis tool package to predict the coplanar view in TAVR was evaluated. Fifty-seven patients with severe symptomatic aortic stenosis deemed prohibitive-risk for surgery and who underwent TAVR were enrolled. Patients were randomized 2:1 to CACT vs. angiography (control) in estimating the coplanar view. These approaches to determine the coplanar view were compared quantitatively. Radiation doses needed to determine the coplanar view were recorded for both the CACT and control patients. Use of CACT offered good agreement with the actual angiographic view utilized during TAVR in 34 out of 41 cases in which a CACT scan was performed (83 %). For these 34 cases, the mean angular magnitude difference, taking into account both oblique and cranial/caudal angulation, was 1.3° ± 0.4°, while the maximum difference was 7.3°. There were no significant differences in the mean total radiation dose delivered to patients between the CACT and control groups as measured by either dose area product (207.8 ± 15.2 Gy cm(2) vs. 186.1 ± 25.3 Gy cm(2), P = 0.47) or air kerma (1287.6 ± 117.7 mGy vs. 1098.9 ± 143.8 mGy, P = 0.32). Use of reduced-angular range CACT coupled with fully automated 3D analysis tools is a safe, practical, and feasible method by which to determine the optimal angiographic deployment view for guiding TAVR procedures.

Three-dimensional vascular angiography.

Traditional angiography of the vasculature is limited by its 2-dimensional projection of complex 3-dimensional structures and the consequent imaging artifacts that interfere with visualization. During the last 10 years, technologies capable of minimizing the shortcomings of traditional angiography have been developed and are now in clinical use. Rotational angiography and 3-dimensional imaging are 2 of these powerful tools and, together, represent a major advance in the angiographic diagnosis and treatment of patients with coronary, cerebral, and peripheral vascular disease.

Stress analysis using anatomically realistic coronary tree.

Plaque rupture with superimposed thrombosis is the main cause of the acute coronary syndromes of unstable angina, myocardial infarction, and sudden death. Endothelial disruption leading to plaque rupture may relate to mechanical fatigue associated with cyclic flexion of plaques. A novel method is proposed to assess stress and strain distribution using the finite element (FE) analysis and in vivo patient-specific dynamic 3D coronary arterial tree reconstruction from cine angiographic images. The local stresses were calculated on the diseased arterial wall which was modeled as consisting of a central fibrotic cap subjected to the cyclic flexion from cardiac contraction. Various parameters characterizing the plaque were chosen including vessel diameter, percentage narrowing, and lesion length. According to the FEA simulations, the results show that the smaller vessel diameter, greater percentage narrowing, and/or larger lesion size may result in higher stress on the plaque cap, with the vessel diameter as the dominant factor.

Kinematic and deformation analysis of 4-D coronary arterial trees reconstructed from cine angiograms.

In the cardiovascular arena, percutaneous catheter-based interventional (i.e., therapeutic) procedures include a variety of coronary and other vascular system interventions. These procedures use two-dimensional (2-D) X-ray-based imaging as the sole or the major imaging modality for procedure guidance and quantification of key parameters. Coronary vascular curvilinearity is one key parameter that requires a four-dimensional (4-D) format, i.e., three-dimensional (3-D) anatomical representation that changes during the cardiac cycle. A new method has been developed for reconstruction and analysis of these patient-specific 4-D datasets utilizing routine cine angiograms. The proposed method consists of three major processes: 1) reconstruction of moving coronary arterial tree throughout the cardiac cycle; 2) establishment of temporal correspondence with smoothness constraints; and 3) kinematic and deformation analysis of the reconstructed 3-D moving coronary arterial trees throughout the cardiac cycle.

Quantitative analysis of reconstructed 3-D coronary arterial tree and intracoronary devices.

Traditional quantitative coronary angiography is performed on two-dimensional (2-D) projection views. These views are chosen by the angiographer to minimize vessel overlap and foreshortening. With 2-D projection views that are acquired in this nonstandardized fashion, however, there is no way to know or estimate how much error occurs in the QCA process. Furthermore, coronary arteries possess a curvilinear shape and undergo a cyclical deformation due to their attachment to the myocardium. Therefore, it is necessary to obtain three-dimensional (3-D) information to best describe and quantify the dynamic curvilinear nature of the human coronary artery. Using a patient-specific 3-D coronary reconstruction algorithm and routine angiographic images, a new technique is proposed to describe: 1) the curvilinear nature of 3-D coronary arteries and intracoronary devices; 2) the magnitude of the arterial deformation caused by intracoronary devices and due to heart motion; and 3) optimal view(s) with respect to the desired "pathway" for delivering intracoronary devices.

Determination of optimal viewing regions for X-ray coronary angiography based on a quantitative analysis of 3D reconstructed models.

Current expert-recommended views for coronary angiography are based on heuristic experience and have not been scientifically studied. We sought to identify optimal viewing regions for first and second order vessel segments of the coronary arteries that provide optimal diagnostic value in terms of minimizing vessel foreshortening and overlap. Using orthogonal 2D images of the coronary tree, 3D models were created from which patient-specific optimal view maps (OVM) allowing quantitative assessment of vessel foreshortening and overlap were generated. Using a novel methodology that averages 3D-based optimal projection geometries, a universal OVM was created for each individual coronary vessel segment that minimized both vessel foreshortening and overlap. A universal OVM model for each coronary segment was generated based on data from 137 patients undergoing coronary angiography. We identified viewing regions for each vessel segment achieving a mean vessel foreshortening value of 5.8 +/- 3.9% for the left coronary artery (LCA) and 5.6 +/- 3.6% for the right coronary artery (RCA). The overall mean overlap values achieved were 8.7 +/- 7.9% for the LCA and 4.6 +/- 3.2% for the RCA. This scientifically-based OVM evaluation of coronary vessel segments provides the means to facilitate acquisitions during coronary angiography and interventions that minimize imaging inaccuracies related to foreshortening and overlap, improving the accuracy, efficiency, and safety of diagnostic and interventional coronary procedures.

Initial clinical experience of selective coronary angiography using one prolonged injection and a 180 degrees rotational trajectory.

OBJECTIVE: Evaluate the safety of prolonged coronary injections during a rotational acquisition covering 180 degrees. BACKGROUND: Rotational angiography has been adapted to coronary angiography and shown to reduce radiation and contrast exposure. Three-dimensional (3D) reconstructions and other advanced applications require imaging over a 180 degrees -arc with a single but longer injection of larger contrast volumes. METHODS: Thirty patients referred for angiography were enrolled. Blood pressure (BP), heart rate (HR), symptoms, and ectopy were recorded before-and-after injections. RESULTS: Pre and post-injection HRs for the LCA/RCA were not statistically different (LCA-pre-injection 63+/-13 bpm vs. LCA-post-injection 62+/-11 bpm, P=0.54 and RCA-pre-injection 65+/-12 bpm vs. RCA-post-injection 65+/-10, P=0.88). Central aortic pressure values were not statistically different for the RCA injections (RCA-systolic-pre-injection 118+/-14 mm Hg vs. RCA-systolic-post-injection 112+/-25 mm Hg, P=0.15, and RCA diastolic-pre-injection 69+/-9 mm Hg vs. RCA-diastolic-post-injection 60+/-10 mm Hg, P=0.88) but were statistically significant for the LCA injections (LCA systolic-pre-injection 122+/-19 mm Hg vs. LCA-systolic-post-injection 116+/-17 mm Hg, P=0.0004, and LCA-diastolic-pre-injection 69+/-10 mm Hg vs. LCA-diastolic-post-injection 65+/-9 mm Hg, P=0.0007). There were no symptoms or electrical events documented during or immediately post-injection. CONCLUSION: This study demonstrates the feasibility and safety of longer coronary injections. There were no significant HR changes, clinically insignificant pressure changes, and no adverse reactions. Additional studies will be needed to assure its safety in a larger and clinically more varied patient population.

Angiographic views used for percutaneous coronary interventions: a three-dimensional analysis of physician-determined vs. computer-generated views.

The goal of this study was to determine the severity of vessel foreshortening in standard angiographic views used during percutaneous coronary intervention (PCI). Coronary angiography is limited by its two-dimensional (2D) representation of three-dimensional (3D) structures. Vessel foreshortening in angiographic images may cause errors in the assessment of lesions or the selection and placement of stents. To date, no technique has existed to quantify these 2D limitations or the performance of physicians in selecting angiographic views. Stent deployment was performed in 156 vessel segments in 149 patients. Using 3D reconstruction models of each patient's coronary tree, vessel foreshortening was measured in the actual working view used for stent deployment. A computer-generated optimal view was then identified for each vessel segment and compared to the working view. Vessel foreshortening ranged from 0 to 50% in the 156 working views used for stent deployment and varied by coronary artery and by vessel segment within each artery. In general, views of the mid circumflex artery were the most foreshortened and views of the right coronary artery were the least foreshortened. Expert-recommended views frequently resulted in more foreshortening than computer-generated optimal views, which had only 0.5% +/- 1.2% foreshortening with < 2% overlap for the same 156 segments. Optimal views differed from the operator-selected working views by > or = 10 degrees in over 90% of vessels and frequently occurred in entirely different imaging quadrants. Vessel foreshortening occurs frequently in standard angiographic projections during stent deployment. If unrecognized by the operator, vessel foreshortening may result in suboptimal clinical results. Modifications to expert-recommended views using 3D reconstruction may improve visualization and the accuracy of stent deployment. These results highlight the limitations of 2D angiography and support the development of real-time 3D techniques to improve visualization during PCI.

Three-dimensional analysis of in vivo coronary stent--coronary artery interactions.

Stent implantation results in important three-dimensional (3D) changes in arterial geometry which may be associated with adverse events. Previous attempts to quantify these 3D changes have been limited by two-dimensional techniques. Using a 3D reconstruction technique, vessel curvatures at end-diastole (ED) and end-systole (ES) were measured before and after stent placement of 100 stents (3 stent cell designs, 6 stent types). After stenting, the mean curvature at ED and ES decreased by 22 and 21%, respectively, and represents a straightening effect on the treated vessel. This effect was proportional to the amount of baseline curvature as high vessel curvature predicted more profound vessel straightening. When analyzed by stent cell design, closed-cell stents resulted in more vessel straightening than other designs (open cell or modified slotted tubes). Stent implantation resulted in the transmission of shape changes to stent ends and generated hinge points or buckling. Stent implantation creates 3D changes in arterial geometry which can be quantified using a 3D reconstruction technique.

Four-dimensional analysis of cyclic changes in coronary artery shape.

The objective of this study was to derive a method for quantifying the dynamic geometry of coronary arteries. Coronary artery geometry plays an important role in atherosclerosis. Coronary artery geometry also influences the performance of coronary interventions. Conversely, implantation of stents may alter coronary artery geometry. Clinical tools to define vessel shape have not been readily available. Using a Frenet-Serret curvature analysis applied to 3D reconstruction data derived from standard coronary angiograms, 21 coronary arteries were analyzed at end-diastole (ED) and end-systole (ES). Vessels were divided anatomically: type 1 consisted of vessels lying in the AV groove (left circumflex, right coronary) and type 2 consisted of vessels overlying actively contracting myocardium (left anterior descending, diagonal, obtuse marginal, right ventricular marginal, posterior descending, posterolateral). Vessel segments were analyzed by assessing the changes in curvature, torsion, and discrete flexion points (FPs), areas of systolic bending in the arterial contour. The curvature from ED to ES of type 1 vessels was unchanged (-0.02 +/- 0.03 cm(-1)), while the curvature change of type 2 vessels showed a 38% increase (0.33 +/- 0.04 cm(-1); P < 0.001). Type 1 vessels had fewer FPs per vessel than type 2 vessels (0.38 +/- 0.18 and 2.40 +/- 0.23 FP/vessel, respectively; P < 0.001). FPs were more common in distal segments and branch vessels. A method to quantify cyclic changes in coronary artery shape was applied to 3D data sets derived from standard coronary angiograms. Coronary arteries undergo a cyclic change in shape resulting in changes in overall curvature as well as formation of discrete flexion points. These changes in vessel shape are asymmetrically distributed in coronary arteries.