Green Synthesis of the Triazine Derivatives and their Application for the Benign Electrocatalytic Reaction of Nitrate Reduction to Ammonia.

This work uses green sustainable reactions twice. Firstly, it is microwave synthesis: 2,4,6-tribiphenyl-4-yl-1,3,5-triazine and similar compounds were prepared in a closed microwave reactor in n-octane by the Friedel-Crafts reaction. Second, a hybrid electrocatalyst for the highly demanded electrochemical reaction of nitrate reduction to ammonia (NO3RR) was prepared based on this material. This reaction has great potential to replace the energy-intensive Haber-Bosch process, and in addition, has independent value for the elimination of nitrate contamination of water resources. As shown in the work, microwave synthesis is an eco-friendly method for the synthesis of complex organic compounds; fast, selective and with a high yield of the target product. The electrocatalyst deposited on the graphite electrode consisted of a layer of 2,4-bis([1,1'-biphenyl]-4-yl)-6-hydroxy-1,3,5-triazine and related compounds coated with cobalt oxide. The hybrid catalyst was firmly retained on the graphite electrode during NO3RR and the material showed impressive stability with almost no decrease in catalytic activity even after the fifth cycle. Both 2,4-bis([1,1'-biphenyl]-4-yl)-6-hydroxy-1,3,5-triazine and the catalyst based on this substance were characterized by SEM, XPS, XRD, UV-vis spectra, cyclic (and linear) voltammetry, and chronoamperometry. This work can serve as a starting point for the development of stable and durable electrocatalysts for NO3RR using triazine derivatives.

Ammonium Polyuranates: Old Dog, New Structural Tricks.

The crystal structure of ammonium polyuranates xUO3·yNH3·zH2O has been investigated. Powder X-ray diffraction (PXRD) has been employed to define single-phase samples within a series of synthesized compounds, which are further characterized by elemental analysis to ascertain the stoichiometry, revealing compositions of 3UO3·NH3·5H2O and 2UO3·NH3·3H2O. Analysis using extended X-ray absorption fine structure and vibrational spectroscopy has elucidated that both 3UO3·NH3·5H2O and 2UO3·NH3·3H2O possess a local structure similar to the metaschoepite─layered U(VI) oxohydroxide UO3·2H2O, but with H2O and NH4+ groups in the interlayers. The structures of ammonium polyuranates are solved from PXRD data, revealing their relationship to the U(VI) oxohydroxide with the established composition of NH4[(UO2)3O2(OH)3]·3H2O and NH4[(UO2)2O2(OH)]·2H2O for 3UO3·NH3·5H2O and 2UO3·NH3·H2O, respectively. These structures maintain the arrangement of U-O polyhedra as pentagonal bipyramids. However, disparities in lattice parameters, space group, and layer topology from UO3·2H2O emphasize significant structural modifications resulting from the substitution of water by ammonium. Moreover, the anion topology of the NH4[(UO2)2O2(OH)]·2H2O has no analogues among uranium oxohydroxide minerals. Notably, ammonium polyuranates, when compared, have minimal alterations in lattice parameters regardless of the presence of ammonia within the structure. The revealed results contribute valuable insights into the UO3-NH3-H2O system and hold potential applications in the field of nuclear power as ammonium polyuranates form during actinide precipitation in back-end of the nuclear fuel cycle and also serve as precursors in the fabrication of nuclear fuel.

Application of mixed phosphorus/sulfur ligands based on terpenoids in Pd-catalyzed asymmetric allylic substitution and Rh-catalyzed hydrogenation.

A small library of easily prepared diamidophosphite-sulfides based on 1,3-thioether alcohols, primarily of terpenoid nature, was developed. Upon complexation with Pd(II) ions, these hemilabile ligands showed the ability to form both P,S-chelates and complexes with two ligands P-monodentately bonded to the metal. The structures of the ligands and their complexes were determined by 2D NMR spectroscopy and X-ray diffraction. The use of these stereoselectors provided up to 95% ee in the classic Pd-catalyzed asymmetric allylic substitution reactions of (E)-1,3-diphenylallyl acetate with C- and N-nucleophiles and up to 80% ee in the Pd-mediated allylic alkylation of cinnamyl acetate with ß-ketoesters. In addition, ee values of up to 90% with quantitative conversion were achieved in the Rh-catalyzed asymmetric hydrogenation of methyl esters of unsaturated acids. The effects of the structural parameters, reaction conditions and ligand-to-metal ratio on the catalytic results are discussed.

A Promising 1,3,5-Triazine-Based Anion Exchanger for Perrhenate Binding: Crystal Structures of Its Chloride, Nitrate and Perrhenate Salts.

The reaction of pyridine with cyanuric chloride was studied under microwave activation as well as in the presence of silver nitrate. The product of hydrolysis containing two pyridinium rings and chloride anion was isolated. The structures of these anion exchanger salts with chloride, nitrate and perrhenate anions are discussed.

A Challenge toward Novel Quaternary Sulfides SrLnCuS3 (Ln = La, Nd, Tm): Unraveling Synthetic Pathways, Structures and Properties.

We report on the novel heterometallic quaternary sulfides SrLnCuS3 (Ln = La, Nd, Tm), obtained as both single crystals and powdered samples. The structures of both the single crystal and powdered samples of SrLaCuS3 and SrNdCuS3 belong to the orthorhombic space group Pnma but are of different structural types, while both samples of SrTmCuS3 crystallize in the orthorhombic space group Cmcm with the structural type KZrCuS3. Three-dimensional crystal structures of SrLaCuS3 and SrNdCuS3 are formed from the (Sr/Ln)S7 capped trigonal prisms and CuS4 tetrahedra. In SrLaCuS3, alternating 2D layers are stacked, while the main backbone of the structure of SrNdCuS3 is a polymeric 3D framework [(Sr/Ln)S7]n, strengthened by 1D polymeric chains (CuS4)n with 1D channels, filled by the other Sr2+/Ln3+ cations, which, in turn, form 1D dimeric ribbons. A 3D crystal structure of SrTmCuS3 is constructed from the SrS6 trigonal prisms, TmS6 octahedra and CuS4 tetrahedra. The latter two polyhedra are packed together into 2D layers, which are separated by 1D chains (SrS6)n and 1D free channels. In both crystal structures of SrLaCuS3 obtained in this work, the crystallographic positions of strontium and lanthanum were partially mixed, while only in the structure of SrNdCuS3, solved from the powder X-ray diffraction data, were the crystallographic positions of strontium and neodymium partially mixed. Band gaps of SrLnCuS3 (Ln = La, Nd, Tm) were found to be 1.86, 1.94 and 2.57 eV, respectively. Both SrNdCuS3 and SrTmCuS3 were found to be paramagnetic at 20-300 K, with the experimental magnetic characteristics being in good agreement with the corresponding calculated parameters.

Quaternary Selenides EuLnCuSe3: Synthesis, Structures, Properties and In Silico Studies.

In this work, we report on the synthesis, in-depth crystal structure studies as well as optical and magnetic properties of newly synthesized heterometallic quaternary selenides of the Eu+2Ln+3Cu+1Se3 composition. Crystal structures of the obtained compounds were refined by the derivative difference minimization (DDM) method from the powder X-ray diffraction data. The structures are found to belong to orthorhombic space groups Pnma (structure type Ba2MnS3 for EuLaCuSe3 and structure type Eu2CuS3 for EuLnCuSe3, where Ln = Sm, Gd, Tb, Dy, Ho and Y) and Cmcm (structure type KZrCuS3 for EuLnCuSe3, where Ln = Tm, Yb and Lu). Space groups Pnma and Cmcm were delimited based on the tolerance factor t', and vibrational spectroscopy additionally confirmed the formation of three structural types. With a decrease in the ionic radius of Ln3+ in the reported structures, the distortion of the (LnCuSe3) layers decreases, and a gradual formation of the more symmetric structure occurs in the sequence Ba2MnS3 → Eu2CuS3 → KZrCuS3. According to magnetic studies, compounds EuLnCuSe3 (Ln = Tb, Dy, Ho and Tm) each exhibit ferrimagnetic properties with transition temperatures ranging from 4.7 to 6.3 K. A negative magnetization effect is observed for compound EuHoCuSe3 at temperatures below 4.8 K. The magnetic properties of the discussed selenides and isostructural sulfides were compared. The direct optical band gaps for EuLnCuSe3, subtracted from the corresponding diffuse reflectance spectra, were found to be 1.87-2.09 eV. Deviation between experimental and calculated band gaps is ascribed to lower d states of Eu2+ in the crystal field of EuLnCuSe3, while anomalous narrowing of the band gap of EuYbCuSe3 is explained by the low-lying charge-transfer state. Ab initio calculations of the crystal structures, elastic properties and phonon spectra of the reported compounds were performed.

Synthesis and the Crystal Structure of a New Chiral 1D Metal-Organic Coordination Polymer Based on L-Prolineamide-Substituted Diarylacetylenedicarboxylic Acid Derivative.

The new homochiral 1D metal-organic coordination polymer [Cu2(EDPB)•H2O]n was synthesized starting from the original 3,3'-ethyne-1,2-diylbis[6-(L-prolylamino)benzoic acid] (H4EDPB). The unique crystal structure of the new compound was established by powder X-ray diffraction. The [Cu2(EDPB)•H2O]n system shows catalytic activity and enantioselectivity in a Henry reaction of p-nitrobenzaldehyde with nitromethane.

Porphyrinylphosphonate-Based Metal-Organic Framework: Tuning Proton Conductivity by Ligand Design.

A novel metal-organic framework [Zn3 (Ni-H2 TPPP)(Ni-H4 TPPP)(Ni-H5 TPPP)⋅7(CH3 )2 NH2 ⋅DMF⋅7 H2 O] (where Ni-Hx TPPP (x=2,4,5) are partially deprotonated [5,10,15,20-tetrakis(3-(phosphonatophenyl)-porphyrinato(2-))]nickel(II) species), IPCE-2Ni, with outstanding proton conductivity (1.0×10-2  S cm-1 at 75 °C and 95 % relative humidity) has been obtained. The high concentration of free phosphonate groups and compensating dimethylammonium cations bound by hydrogen bonds in the unique crystal structure of IPCE-2Ni is a key factor responsible for the observed high proton conductivity, which is one order of magnitude higher than for the corresponding MOF based on 5,10,15,20-tetrakis(4-(phosphonatophenyl)porphyrinato(2-))]nickel(II) IPCE-1Ni and comparable with that of leaders among MOFs.

Impact of the Preparation Procedure on the Performance of the Microporous HKUST-1 Metal-Organic Framework in the Liquid-Phase Separation of Aromatic Compounds.

To date, metal-organic frameworks (MOFs) have been recognized as promising solid phases in high-performance liquid chromatography (HPLC). This research aimed to elucidate the role of the physico-chemical characteristics of the microporous HKUST-1 metal-organic framework in its operation as a selective adsorbent in HPLC. For this, the HKUST-1 samples were prepared by microwave-assisted synthesis and a solvothermal procedure. According to the chromatographic examinations, the HKUST-1 material synthesized in the microwave fields shows an efficient performance in the selective adsorption of aromatic compounds with different functionalities. This study revealed a significant impact of the preparation procedure on the mechanism of the liquid-phase adsorption on the HKUST adsorbents under conditions of the HPLC. An effect of the elution solvent with the different coordination ability to the Cu2+ sites in the HKUST-1 structure on the adsorption selectivity was observed.

Highly Proton-Conductive Zinc Metal-Organic Framework Based On Nickel(II) Porphyrinylphosphonate.

The design of new solid-state proton-conducting materials is a great challenge for chemistry and materials science. Herein, a new anionic porphyrinylphosphonate-based MOF (IPCE-1Ni), which involves dimethylammonium (DMA) cations for charge compensation, is reported. As a result of its unique structure, IPCE-1Ni exhibits one of the highest value of the proton conductivity among reported proton-conducting MOF materials based on porphyrins (1.55×10-3  S cm-1 at 75 °C and 80 % relative humidity).

A Study of the Influence of the HCl Concentration on the Composition and Structure of (Hydroxy)Arylsiloxanes from the Hydrolysis-Condensation Reaction of Aryltrichlorosilanes.

The hydrolysis-condensation reactions of m-tolyl, m-chlorophenyl, and α-naphtyl-trichlorsilanes, (1, 2, and 3, respectively) in water-acetone solutions were examined for how they were influenced by the change in the concentration of HCl (CHCl). The composition of the products was monitored by 29Si NMR spectroscopy and atmospheric pressure chemical ionization mass spectrometry (APCI-MS). The acidity of the medium was shown to affect the yields of the products, and so, what products were formed. For 3, e.g., APCI-MS showed peaks of α-naphtyl-T8 and α-naphtyl-T10 as the most abundant in the spectra taken after 48 and 240 h for the reaction conducted at CHCl = 0.037 mol L-1. Unlike this, at CHCl = 0.15 mol L-1, those peaks were of [α-naphtyl(HO)2SiO]2(α-naphtyl)(HO)Si and/or [α-naphtyl(HO)Si]3, [α-naphtyl(HO)Si]4,5, and α-naphtyl-T8 after 192 h. However, at both CHCl values, the main product (and an intermediate) after 24 h was trans-1,1,3,3-tetrahydroxy-1,3-di-α-naphtyldisiloxane. It was isolated and its structure established by 1H-, 29Si-NMR, and X-ray powder diffraction.

Cryochemical Synthesis of Polymorphous Nanostructures of a Steroid Neurohormone.

A new cryochemical strategy of producing nanoparticles and polymorphous nanostructures of drugs is used, which is based on the dynamic combination of high and low temperatures, gas and solid phases, and inert carrier gases. This technology is applied to the synthesis of nanoparticles of steroid neurohormone dehydroepiandrosterone (DHEA). We have optimized the conditions of synthesis of the new polymorphous DHEA structure, FVII. The molecules of DHEA in FVII structure are bound by hydrogen bonds via oxygen atoms. The grain size is 100 nm. It is shown that the yield and ratio of the resulting nanoforms of this hormone are determined by the nature and properties of the inert carrier gas. The highest yield and selectivity of FVII are observed when carbon dioxide is used as the carrier gas. In the case of helium, the FVII content decreases from 85 to 30% and other structures are formed. In experiments without carrier gas, nanoparticles are formed but no FVII is produced. The selectivity and the effect of carrier gas are considered on the basis of homogeneous and heterogeneous formation of nanoparticles and the relationship between particle selectivity and its activity. The synthesis of various polymorphous structures on the nanoscale is assumed to be the manifestation of the size effect in the synthesis of drugs.

Stereoelectronic Control in the Ozone-Free Synthesis of Ozonides.

The value of stereoelectronic guidelines is illustrated by the discovery of a convenient, ozone-free synthesis of bridged secondary ozonides from 1,5-dicarbonyl compounds and H2 O2 . The tetraoxane products generally formed in reactions of carbonyl and dicarbonyl compounds with H2 O2 were not detected because the structural distortions imposed on the tetraoxacyclohexane subunit in [3.2.2]tetraoxanonanes by the three-carbon bridge leads to the partial deactivation of anomeric effects. The new procedure is readily scalable to produce gram quantities of the ozonides. This reaction enables the selective preparation of ozonides without the use of ozone.

Diversity Oriented Synthesis of Polycyclic Heterocycles through the Condensation of 2-Amino[1,2,4]triazolo[1,5-a]pyrimidines with 1,3-Diketones.

The acid-catalyzed condensation between 2-aminosubstituted [1,2,4]triazolo[1,5-a]pyrimidines and their analogues with various saturation of the pyrimidine ring and 1,3-diketones or 1,1,3,3-tetramethoxypropane was evaluated as a new approach for the synthesis of diversely substituted polycyclic derivatives of triazolopyrimidine. The reaction of 4,5,6,7-tetrahydro- or aromatic aminotriazolopyrimidines results in selective formation of the corresponding [1,2,4]triazolo[1,5-a:4,3-a']dipyrimidin-5-ium salts, and the condensation of substrates containing the 4,7-dihydro-[1,2,4]triazolo[1,5-a]pyrimidine fragment is accompanied by a cascade rearrangement with unusual recyclization of the dihydropyrimidine ring to yield partially hydrogenated [1,2,4]triazolo[1,5-a:4,3-a']dipyrimidin-5-ium or pyrimido[1',2':1,5][1,2,4]triazolo[3,4-b]quinazolin-5-ium salts. The proposed methodology exhibits a wide scope, providing rapid access to polycondensed derivatives of the [1,2,4]triazolo[1,5-a]pyrimidine scaffold. DFT calculations of the Gibbs free energies of possible isomers were performed to rationalize the experimentally observed reactivity and selectivity.

Approach for the preparation of various classes of peroxides based on the reaction of triketones with H2O2: first examples of ozonide rearrangements.

The reaction of ß,δ-triketones with an ethereal solution of H2O2 catalyzed by heteropoly acids in the presence of a polar aprotic co-solvent proceeds via three pathways to form three classes of peroxides: tricyclic monoperoxides, bridged tetraoxanes, and a pair of stereoisomeric ozonides. The reaction is unusual in that produces bridged tetraoxanes and ozonides with one of the three carbonyl groups remaining intact. In the synthesis of bridged tetraoxanes, the peroxide ring is formed by the reaction of hydrogen peroxide with two carbonyl groups at the ß positions. The synthesis of ozonides from ketones and hydrogen peroxide is a unique process in which the ozonide ring is formed with the participation of two carbonyl groups at the δ positions. Rearrangements of ozonides were found for the first time after more than one century of their active investigation. Ozonides are interconverted with each other and rearranged into tricyclic monoperoxides, whereas ozonides and tricyclic monoperoxides are transformed into bridged tetraoxanes. The individual reaction products were isolated by column chromatography and characterized by NMR spectroscopy, mass spectrometry, and elemental analysis. One representative of each class of peroxides was characterized by X-ray diffraction.

Syntheses and Patterns of Changes in Structural Parameters of the New Quaternary Tellurides EuRECuTe3 (RE = Ho, Tm, and Sc): Experiment and Theory.

The layered orthorhombic quaternary tellurides EuRECuTe3 (RE = Ho, Tm, Sc) with Cmcm symmetry were first synthesized. Single crystals of the compounds up to 500 µm in size were obtained by the halide-flux method at 1120 K from elements taken in a ratio of Eu/RE/Cu/Te = 1:1:1:3. In the series of compounds, the changes in lattice parameters were in the ranges a = 4.3129(3)-4.2341(3) Å, b = 14.3150(9)-14.1562(9) Å, c = 11.2312(7)-10.8698(7) Å, V = 693.40(8)-651.52(7) Å3. In the structures, the cations Eu2+, RE3+ (RE = Ho, Tm, Sc), and Cu+ occupied independent crystallographic positions. The structures were built with distorted copper tetrahedra forming infinite chains [CuTe4]7- and octahedra [RETe6]9- forming two-dimensional layers along the a-axis. These coordination polyhedra formed parallel two-dimensional layers CuRETe32-∞2. Between the layers, along the a-axis, chains of europium trigonal prisms [EuTe6]10- were located. Regularities in the variation of structural parameters and the degree of distortion of coordination polyhedra depending on the ionic radius of the rare-earth metal in the compounds EuRECuCh3 (RE = Ho, Er, Tm, Lu, Sc; Ch = S, Se, Te) were established. It is shown that with a decrease in the ionic radius ri(RE3+) in the compounds EuRECuTe3, the unit-cell volume, bond length d(RE-Te), distortion degree [CuTe4]7-, and crystallographic compression of layers [RECuTe3]2- decreased. The distortion degree of tetrahedral polyhedra [CuCh4]7-, as well as the structural parameters in europium rare-earth copper tellurides EuRECuTe3, were higher than in isostructural quaternary chalcogenides. Ab initio calculations of the crystalline structure, phonon spectrum, and elastic properties of compounds EuRECuTe3 (RE = Ho, Tm, and Sc) ere conducted. The types and wave numbers of fundamental modes were determined, and the involvement of ions in IR and Raman modes was assessed. The calculated data of the crystal structure correlated well with the experimental results.

Correction to "Mechanosynthesis of Stable Salt Hydrates of Allopurinol with Enhanced Dissolution, Diffusion, and Pharmacokinetics".

[This corrects the article DOI: 10.1021/acsomega.3c05263.].

Synthesis, Crystal Structure, and Optical and Magnetic Properties of the New Quaternary Erbium Telluride EuErCuTe3: Experiment and Calculation.

This paper reports for the first time on a new layered magnetic heterometallic erbium telluride EuErCuTe3. Single crystals of the compound were obtained from the elements at 1120 K using CsI as a flux. The crystal structure of EuErCuTe3 was solved in the space group Cmcm (a = 4.3086(3) Å, b = 14.3093(9) Å, and c = 11.1957(7) Å) with the KZrCuS3 structure type. In the orthorhombic structure of erbium telluride, distorted octahedra ([ErTe6]9-) form two-dimensional layers (Er(Te1)2/2e(Te2)4/2k-)∞2, while distorted tetrahedra ([CuTe4]7-) form one-dimensionally connected substructures (Cu(Te1)2/2e(Te2)2/1t5-∞1) along the [100] direction. The distorted octahedra and tetrahedra form parallel two-dimensional layers (CuErTe32-∞2) between which Eu2+ ions are located in a trigonal-prismatic coordination environment (EuTe610-). The trigonal prisms are connected by faces, forming chains (Eu(Te1)2/2(Te2)4/22-∞1) along the [100] direction. Regularities in the variations in structural parameters were established in the series of erbium chalcogenides (EuErCuCh3 with Ch = S, Se, and Te) and tellurides (EuLnCuTe3 with Ln = Gd, Er, and Lu). Ab-initio calculations of the crystal structure, phonon spectrum, and elastic properties of the compound EuErCuTe3 were performed. The types and wavenumbers of fundamental modes were determined, and the involvement of ions in the IR and Raman modes was assessed. The experimental Raman spectra were interpreted. The telluride EuErCuTe3 at temperatures below 4.2 K was ferrimagnetic, as were the sulfide and selenide derivatives (EuErCuCh3 with Ch = S and Se). Its experimental magnetic characteristics were close to the calculated ones. The decrease in the magnetic phase transition temperature in the series of the erbium chalcogenides was discovered.

An unexpected imidazole-induced porphyrinylphosphonate-based MOF-to-HOF structural transformation leading to the enhancement of proton conductivity.

Post-synthetic modification of proton-conducting metal-organic frameworks (MOFs) by loading small molecules capable of generating protons into pores is an efficient approach for developing a new type of material with improved ionic conductivity. Herein, the synthesis, characterization and proton conductivity of a novel electroneutral MOF based on palladium(II) meso-tetrakis(4-(phosphonatophenyl))porphyrinate, IPCE-1Pd, are reported. The exposure of the obtained framework to imidazole by the diffusion vapor method has surprisingly led to its complete crystal-to-crystal MOF-to-HOF transformation, resulting in the formation of a novel hydrogen-bonded organic framework (HOF) IPCE-1Pd_Im, which is the first example of such kind of structural change among all known MOFs. This modification has led to an almost 25-fold increase in the proton conductivity in comparison with the pristine MOF, reaching up to 6.54 × 10-3 S cm-1 at 85 °C and 95% relative humidity, which is one of the highest values among all known porphyrin-based HOFs.

Two polymorphs of 2-ethyl-3-hydroxy-6-methylpyridinium hydrogen N-acetyl-L-glutamate from powder diffraction data.

The title salt, C8H12NO(+)·C7H10NO5(-), crystallizes in two polymorphic modifications, viz. monoclinic (M) and orthorhombic (O). The crystal structures of both polymorphic modifications have been established from laboratory powder diffraction data. The crystal packing motifs in the two polymorphs are different, but the conformations of the anions are generally similar. In M, the anions are linked by pairs of hydrogen bonds of the N-H···O and O-H···O types into chains along the b-axis direction, and neighbouring molecules within the chain are related by the 21 screw axis. The cations link these chains via O-H···O and N-H···O hydrogen bonds into layers parallel to (001). In O, the anions are linked by O-H···O hydrogen bonds into helices along [001], and neighbouring molecules within the helix are related by the 21 screw axis. The neighbouring helical turns are linked by N-H···O hydrogen bonds. The cations link the helices via O-H···O and N-H···O hydrogen bonds, thus forming a three-dimensional network.