Retraction: Colossal Density-Driven Resistance Response in the Negative Charge Transfer Insulator MnS_{2} [Phys. Rev. Lett. 127, 016401 (2021)].

Retraction of DOI: 10.1103/PhysRevLett.127.016401.

Stable and metastable structures of tin (IV) oxide at high pressure.

We have analysed [Formula: see text] with a combination of synchrotron X-ray diffraction and X-ray absorption spectroscopy across a pressure range of [Formula: see text] GPa with thermal annealing by a [Formula: see text] laser allowing access to all of the known high-density polymorphs of [Formula: see text], and here report their crystallographic information. The metastability of the post-rutile [Formula: see text]-[Formula: see text] and [Formula: see text] structures in [Formula: see text] are investigated by experiment and PW-DFT simulations, revealing a complex energetic landscape and suggesting a significant dependence of the observed phases on the pressure-temperature pathway taken in experiment. This article is part of the theme issue 'Exploring the length scales, timescales and chemistry of challenging materials (Part 1)'.

Colossal Density-Driven Resistance Response in the Negative Charge Transfer Insulator MnS_{2}.

A reversible density driven insulator to metal to insulator transition in high-spin MnS_{2} is experimentally observed, leading with a colossal electrical resistance drop of 10^{8} Ω by 12 GPa. Density functional theory simulations reveal the metallization to be unexpectedly driven by previously unoccupied S_{2}^{2-} σ_{3p}^{*} antibonding states crossing the Fermi level. This is a unique variant of the charge transfer insulator to metal transition for negative charge transfer insulators having anions with an unsaturated valence. By 36 GPa the emergence of the low-spin insulating arsenopyrite (P2_{1}/c) is confirmed, and the bulk metallicity is broken with the system returning to an insulative electronic state.

Covalency is Frustrating: La2Sn2O7 and the Nature of Bonding in Pyrochlores under High Pressure-Temperature Conditions.

Natural specimens of the pyrochlore (A2B2O7) compounds have been found to retain foreign actinide impurities within their parent framework, undergoing metamictization to a fully amorphous state. The response to radionuclide decay identifies pyrochlore systems with having high radiation tolerance and tailored use in radioactive waste applications and radionuclide sequestration. High pressure is a powerful pathway to high density states and amorphization with parallels to radiation-induced processes. Here, La2Sn2O7 is evaluated under extreme conditions via the combination of laser heating in a diamond anvil cell with X-ray diffraction and Raman spectroscopy. The measurements are supported by ab initio random structure searching and molecular dynamics calculations. A new ground state at 70 GPa is revealed, and high temperature annealing is fundamental to access its crystalline ground state and fully determine the structure. This crystalline phase ( P21/ c) retains its structural integrity during decompression and is fully recoverable to ambient conditions. The final state of the system is shown to be highly pathway dependent due to the covalent nature of the Sn-O bonding. The Tc pyrochlore, La2Tc2O7, is analyzed for similarities in the bonding to determine the likelihood of an analogous pathway dependency to a final state.

Pressure-Tuneable Visible-Range Band Gap in the Ionic Spinel Tin Nitride.

The application of pressure allows systematic tuning of the charge density of a material cleanly, that is, without changes to the chemical composition via dopants, and exploratory high-pressure experiments can inform the design of bulk syntheses of materials that benefit from their properties under compression. The electronic and structural response of semiconducting tin nitride Sn3 N4 under compression is now reported. A continuous opening of the optical band gap was observed from 1.3 eV to 3.0 eV over a range of 100 GPa, a 540 nm blue-shift spanning the entire visible spectrum. The pressure-mediated band gap opening is general to this material across numerous high-density polymorphs, implicating the predominant ionic bonding in the material as the cause. The rate of decompression to ambient conditions permits access to recoverable metastable states with varying band gaps energies, opening the possibility of pressure-tuneable electronic properties for future applications.

Revisit of Pressure-Induced Phase Transition in PbSe: Crystal Structure, and Thermoelastic and Electrical Properties.

Lead selenide, PbSe, an important lead chalcogenide semiconductor, has been investigated using in-situ high-pressure/high-temperature synchrotron X-ray diffraction and electrical resistivity measurements. For the first time, high-quality X-ray diffraction data were collected for the intermediate orthorhombic PbSe. Combined with ab initio calculations, we find a Cmcm, InI-type symmetry for the intermediate phase, which is structurally more favorable than the anti-GeS-type Pnma. At room temperature, the onset of the cubic-orthorhombic transition was observed at ∼3.5 GPa with a ∼3.4% volume reduction. At an elevated temperature of 1000 K, the reversed orthorhombic-to-cubic transition was observed at 6.12 GPa, indicating a positive Clapeyron slope for the phase boundary. Interestingly, phase-transition induced elastic softening in PbSe was also observed, which can be mainly attributed to the loosely bonded trigonal prisms along the b-axis in the Cmcm structure. In a comparison with the cubic phase, orthorhombic PbSe exhibits a large negative pressure dependence of electrical resistivity. In addition, thermoelastic properties of orthorhombic PbSe have been derived from isothermal compression data, such as the temperature derivative of bulk modulus and thermally induced pressure.

CO2 laser heating system for in situ radial x-ray absorption at 16-BM-D at the Advanced Photon Source.

We present a portable CO2 laser heating system for in situ x-ray absorption spectroscopy (XAS) studies at 16-BM-D (High Pressure Collaborative Access Team, Advanced Photon Source, Argonne National Laboratory). Back scattering optical measurements are made possible by the implementation of a Ge beamsplitter. Optical pyrometry is conducted in the near-infrared, and our temperature measurements are free of chromatic aberration due to the implementation of the peak-scaling method [A. Kavner and W. R. Panero, Phys. Earth Planet. Inter. 143-144, 527-539 (2004) and A. Kavner and C. Nugent, Rev. Sci. Instrum. 79, 024902 (2008)] and mode scrambling of the input signal. Laser power stabilization is established using electronic feedback, providing a steady power over second timescales [Childs et al., Rev. Sci. Instrum. 91, 103003 (2020)]-crucial for longer XAS collections. Examples of in situ high pressure-temperature extended x-ray absorption fine structure measurements of ZrO2 are presented to demonstrate this new capability.

Optical and electronic solutions for power stabilization of CO2 lasers.

High pressure-temperature conditions can be readily achieved through the laser-heated diamond anvil cell (LH-DAC). A stable laser source is required for reliable in situ measurements of the sample, as the sample is small with a thermal time constant of the order of microseconds. Here, we show that the power instabilities typical of CO2 gas lasers used in LH-DAC's are ±5% at the second timescale and ∼±50% at the microsecond timescale. We also demonstrate that the pointing instability of the laser requires either a diffuser or an integrating sphere for reliable total power measurements with small sized detectors. We present a simple solution for stabilizing the power of a CO2 gas laser on the second timescale by the direct modulation of the current across the tube and another solution that stabilizes the power to the microsecond timescale by externally modulating the CO2 laser beam. Both solutions can achieve a ±0.3% power stability.

Anomalous Conductivity in the Rutile Structure Driven by Local Disorder.

Many rutile-type materials are characterized by a softness in shear with pressure which is coupled to a Raman-active librational motion. Combining direct studies of anion positions in SnO2 with measurements of its electronic properties, we find a correlation between O sublattice disorder between 5 and 10 GPa and an anomalous decrease up to 4 orders of magnitude in electrical resistance. Hypotheses into the atomistic nature of the phenomenon are evaluated via ab initio calculations guided by extended X-ray absorption fine structure spectroscopy analysis, and the most likely mechanism is found to be the displacement of single anions resulting from the pressure-induced softening of the librational mode. On the basis of this mechanism, we propose that the same behavior should feature across all materials exhibiting a rutile → CaCl2 phase transition and that conductivity in other rutile-type materials could be facilitated at ambient pressure by appropriate design of devices to enhance defects of this nature.

A CO2 laser heating system for in situ high pressure-temperature experiments at HPCAT.

We present a CO2 laser heating setup for synchrotron x-ray diffraction inside a diamond anvil cell, situated at HPCAT (Sector 16, Advanced Photon Source, Argonne National Lab, Illinois, USA), which is modular and portable between the HPCAT experiment hutches. The system allows direct laser heating of wide bandgap insulating materials to thousands of degrees at static high pressures up to the Mbar regime. Alignment of the focused CO2 laser spot is performed using a mid-infrared microscope, which addressed past difficulties with aligning the invisible radiation. The implementation of the mid-infrared microscope alongside a mirror pinhole spatial filter system allows precise alignment of the heating laser spot and optical pyrometry measurement location to the x-ray probe. A comparatively large heating spot (∼50 µm) relative to the x-ray beam (<10 µm) reduces the risk of temperature gradients across the probed area. Each component of the heating system and its diagnostics have been designed with portability in mind and compatibility with the various experimental hutches at the HPCAT beamlines. We present measurements on ZrO2 at 5.5 GPa which demonstrate the improved room-temperature diffraction data quality afforded by annealing with the CO2 laser. We also present in situ measurements at 5.5 GPa up to 2800 K in which we do not observe the postulated fluorite ZrO2 structure, in agreement with recent findings.