An Effective Catholyte for Sulfide-Based All-Solid-State Batteries Utilizing Gas Absorbents.

All-solid-state batteries (ASSBs) possess the advantage of ensuring safety while simultaneously maximizing energy density, making them suitable for next-generation battery models. In particular, sulfide solid electrolytes (SSEs) are viewed as promising candidates for ASSB electrolytes due to their excellent ionic conductivity. However, a limitation exists in the form of interfacial side reactions occurring between the SSEs and cathode active materials (CAMs), as well as the generation of sulfide-based gases within the SSE. These issues lead to a reduction in the capacity of CAMs and an increase in internal resistance within the cell. To address these challenges, cathode composite materials incorporating zinc oxide (ZnO) are fabricated, effectively reducing various side reactions occurring in CAMs. Acting as a semiconductor, ZnO helps mitigate the rapid oxidation of the solid electrolyte facilitated by an electronic pathway, thereby minimizing side reactions, while maintaining electron pathways to the active material. Additionally, it absorbs sulfide-based gases, thus protecting the lithium ions within CAMs. In this study, the mass spectrometer is employed to observe gas generation phenomena within the ASSB cell. Furthermore, a clear elucidation of the side reactions occurring at the cathode and the causes of capacity reduction in ASSB are provided through density functional theory calculations.

Carbon footprint and cost reduction by endoscopic grading of gastric intestinal metaplasia using narrow-band imaging.

BACKGROUND AND AIM: Gastric intestinal metaplasia (GIM) is a high-risk factor for the development of gastric cancer. Narrow-band imaging (NBI) enables endoscopic grading of GIM (EGGIM). In the era of climate change, gastrointestinal endoscopists are expected to reduce greenhouse gas emissions and medical waste. Based on the diagnostic performance of NBI endoscopy, this study measured the environmental impact and reduced cost of implementing EGGIM during gastroscopy. METHODS: Using NBI endoscopy in 242 patients, EGGIM classification and operative link on GIM (OLGIM) staging were prospectively performed in five different areas (lesser and greater curvatures of the corpus and antrum, and the incisura angularis). We estimated the environmental impact and cost reduction of the biopsy procedures and pathological processing if EGGIM were used instead of OLGIM. RESULTS: The diagnostic accuracy of NBI endoscopy for GIM was 93.0-97.1% depending on the gastric area. When a high EGGIM score ≥ 5 was the cut-off value for predicting OLGIM stages III-IV, the area under the curve was 0.862, sensitivity was 81.9%, and specificity was 90.4%. The reduction in the carbon footprint by EGGIM was -0.4059 kg carbon dioxide equivalents per patient, equivalent to 1 mile driven by a gasoline-powered car. The cost savings were calculated to be $47.36 per patient. CONCLUSIONS: EGGIM is a reliable method for identifying high-risk gastric cancer patients, thereby reducing the carbon footprint and medical costs in endoscopy practice.

Pregnancy related complications in women with hypertrophic cardiomyopathy: a nationwide population-based cohort study.

BACKGROUND: The impact of hypertrophic cardiomyopathy (HCM) on cardiovascular and obstetrical outcomes in pregnant women remains unclear, particularly in Asian populations. This study aimed to evaluate the maternal cardiovascular and obstetrical outcomes in Korean women with HCM. METHODS: Using data from the Korean National Health Insurance Service database, we identified women who gave birth via cesarean section or vaginal delivery after being diagnosed with HCM between 2006 and 2019. Maternal cardiovascular and obstetrical outcomes were assessed based on the trimester of pregnancy. RESULTS: This study included 122 women and 158 pregnancies. No maternal deaths were noted; however, 21 cardiovascular events, such as hospital admission for cardiac problems, including heart failure and atrial fibrillation (AF), new-onset AF or ventricular tachycardia (VT) occurred in 14 pregnancies (8.8%). Cardiac events occurred throughout pregnancy with a higher occurrence in the third trimester. Cesarean sections were performed in 49.3% of the cases, and all cardiovascular outcomes occurring after delivery were observed in patients who had undergone cesarean sections. Seven cases involved preterm delivery, and two of these cases were accompanied by cardiac events, specifically AF. Pre-existing arrhythmia (AF: odds ratio (OR): 7.44, 95% confidence interval (CI): 2.61-21.21, P < 0.001; VT: OR: 31.61, 95% CI: 5.85-172.77, P < 0.001) was identified as a predictor for composite outcomes of cardiovascular events or preterm delivery. CONCLUSIONS: Most pregnant women with HCM were well-tolerated. However, cardiovascular complications could occur in some patients. Therefore, planned delivery may be necessary for selected patients, especially the women with pre-existing arrhythmias.

A prospective, open-label, randomized clinical trial to evaluate the efficacy and safety of remimazolam in patients undergoing EBUS-TBNA: REST trial design.

BACKGROUND: Remimazolam is safe and effective for moderate sedation during flexible bronchoscopy, but its safety and efficacy during endobronchial ultrasound-guided transbronchial needle aspiration (EBUS-TBNA) remains undetermined. The REST trial (NCT06275594) will be a prospective randomized study of remimazolam in patients undergoing EBUS-TBNA with conscious sedation. The primary aim is to evaluate whether remimazolam is safe and effective for moderate sedation during EBUS-TBNA compared to real-world midazolam and on-label midazolam. METHODS: The REST trial will recruit 330 patients from four university hospitals with mediastinal lesions suspected of being lung cancer who are eligible for EBUS-TBNA under moderate sedation. The participants will be randomized into groups using remimazolam, real-world midazolam, and on-label midazolam (US prescribing information dosage) to perform EBUS-TBNA for procedural sedation. The primary endpoint will be procedural success using composite measures. DISCUSSION: The REST trial will prospectively evaluate the efficacy and safety of remimazolam during EBUS-TBNA under moderate sedation. It will provide information for optimizing sedation modalities and contribute to practical benefits in patients undergoing EBUS-TBNA. TRIAL REGISTRATION: ClinicalTrials.gov (NCT06275594). Prospectively registered on 15 February 2024.

Porphyran Attenuates Neuronal Loss in the Hippocampal CA1 Subregion Induced by Ischemia and Reperfusion in Gerbils by Inhibiting NLRP3 Inflammasome-Mediated Neuroinflammation.

Porphyran, a sulfated polysaccharide found in various species of marine red algae, has been demonstrated to exhibit diverse bioactivities, including anti-inflammatory effects. However, the protective effects of porphyran against cerebral ischemia and reperfusion (IR) injury have not been investigated. The aim of this study was to examine the neuroprotective effects of porphyran against brain IR injury and its underlying mechanisms using a gerbil model of transient forebrain ischemia (IR in the forebrain), which results in pyramidal cell (principal neuron) loss in the cornu ammonis 1 (CA1) subregion of the hippocampus on day 4 after IR. Porphyran (25 and 50 mg/kg) was orally administered daily for one week prior to IR. Pretreatment with 50 mg/kg of porphyran, but not 25 mg/kg, significantly attenuated locomotor hyperactivity and protected pyramidal cells located in the CA1 area from IR injury. The pretreatment with 50 mg/kg of porphyran significantly suppressed the IR-induced activation and proliferation of microglia in the CA1 subregion. Additionally, the pretreatment significantly inhibited the overexpressions of nucleotide-binding domain, leucine-rich-containing family, pyrin domain-containing protein-3 (NLRP3) inflammasome complex, and pro-inflammatory cytokines (interleukin 1 beta and interleukin 18) induced by IR in the CA1 subregion. Overall, our findings suggest that porphyran exerts neuroprotective effects against brain IR injury, potentially by reducing the reaction (activation) and proliferation of microglia and reducing NLRP3 inflammasome-mediated neuroinflammation.

Neuroprotective Effects of Aucubin against Cerebral Ischemia and Ischemia Injury through the Inhibition of the TLR4/NF-κB Inflammatory Signaling Pathway in Gerbils.

Aucubin, an iridoid glycoside, possesses beneficial bioactivities in many diseases, but little is known about its neuroprotective effects and mechanisms in brain ischemia and reperfusion (IR) injury. This study evaluated whether aucubin exhibited neuroprotective effects against IR injury in the hippocampal CA1 region through anti-inflammatory activity in gerbils. Aucubin (10 mg/kg) was administered intraperitoneally once a day for one week prior to IR. Neuroprotective effects of aucubin were assessed by neuronal nuclei (NeuN) immunofluorescence and Floro-Jade C (FJC) histofluorescence. Microgliosis and astrogliosis were evaluated using immunohistochemistry with anti-ionized calcium binding adapter protein 1 (Iba1) and glial fibrillary acidic protein (GFAP). Protein levels of proinflammatory cytokines interleukin1 beta (IL1ß) and tumor necrosis factor alpha (TNFα) were assayed using enzyme-linked immunosorbent assay and Western blot. Changes in toll-like receptor 4 (TLR4)/nuclear factor-κB (NF-κB) signaling pathway were assessed by measuring levels of TLR4, inhibitor of NF-κB alpha (IκBα), and NF-κB p65 using Western blot. Aucubin treatment protected pyramidal neurons from IR injury. IR-induced microgliosis and astrogliosis were suppressed by aucubin treatment. IR-induced increases in IL1ß and TNFα levels were significantly alleviated by the treatment. IR-induced upregulation of TLR4 and downregulation of IκBα were significantly prevented by aucubin treatment, and IR-induced nuclear translocation of NF-κB was reversed by aucubin treatment. Briefly, aucubin exhibited neuroprotective effects against brain IR injury, which might be related to the attenuation of neuroinflammation through inhibiting the TLR-4/NF-κB signaling pathway. These results suggest that aucubin pretreatment may be a potential approach for the protection of brain IR injury.

Bismuth add-on improves the efficacy of 2-week tegoprazan-based triple therapy for first-line Helicobacter pylori eradication: a real-world evidence study.

BACKGROUND: This study aimed to investigate the efficacy of bismuth added to a 2-week triple therapy consisting of tegoprazan (TPZ), amoxicillin, and clarithromycin for first-line Helicobacter pylori eradication. RESEARCH DESIGN AND METHODS: We reviewed the retrospective data of patients who received a 2-week TPZ-based triple therapy with or without 300 mg bismuth twice daily. The primary endpoint was the H. pylori eradication rate of adding bismuth to the TPZ-based triple regimen (TAC-B group), compared to no bismuth added (TAC group). RESULTS: In total, 306 and 256 patients were included in the intention-to-treat (ITT) and per-protocol (PP) analyses, respectively. The eradication success rates were significantly higher in the TAC-B group than in the TAC group (ITT, 82.9% vs. 71.8%, p = 0.029; PP, 95.8% vs. 87.5%, p = 0.027, respectively). The adherence rate to the eradication regimen was 100% in the TAC-B group and 97.0% in the TAC group. The adverse drug event rate in the TAC-B group was comparable to that in the TAC group (29.2% vs. 27.3%, p = 0.742). No use of bismuth was significantly associated with eradication failure (p = 0.038). CONCLUSIONS: The bismuth add-on increased the first-line H. pylori eradication rate of 2-week TPZ-based triple therapy. CLINICAL TRIAL REGISTRATION: www.clinicaltrials.gov identifier is NCT05453994.

The use of fully threaded headless cannulated screws for femoral neck fracture fixation in small-breed dogs show promise in cadaveric study.

OBJECTIVE: To biomechanically evaluate the stability of internal fixation methods for femoral neck fractures in small-breed dogs. Furthermore, the possibility of replacing the headed screw with fully threaded headless cannulated screws in the fixation method was assessed. METHODS: The study was conducted from December 12, 2023, to February 7, 2024. A total of 18 femurs from 9 canine cadavers were used in this study. After a simple neck fracture was created, in group A (n = 6), the fracture was stabilized with three 1.1-mm parallel Kirschner wires (K-wires). In group B (n = 6), a 3.0-mm partially threaded cannulated screw and an antirotation pin were used. In group C (n = 6), a 2.5-mm fully threaded headless cannulated screw and an antirotation pin were used. A mechanical test was conducted to apply a single axial compressive load to the femoral head. RESULTS: 9 adult small-breed dogs weighing 3.6 to 8.3 kg (mean ± SD; 5.9 ± 1.6). The mean maximum failure load was highest in group C (495 ± 81 N), followed by group B (454 ± 50.4 N), and then group A (222 ± 21.6 N). Significant differences in maximum failure load were observed between groups A and B as well as groups A and C but not between groups B and C. CONCLUSION: The use of fully threaded headless cannulated screws presents a promising method for internal fixation of canine femoral neck fractures. CLINICAL RELEVANCE: To demonstrate the potential stability and reliability of fully threaded headless cannulated screws.

Antimicrobial activity, surface properties, and cytotoxicity of microencapsulated phytochemicals incorporated into three-dimensionally printable dental polymers.

OBJECTIVES: This study aimed to investigate the antimicrobial properties of three dimensionally-printed dental polymers (3DPs) incorporated with microencapsulated phytochemicals (MPs) and to assess their surface characteristics and cytotoxicity. METHODS: MPs derived from phytoncide oil and their specific chemical components were introduced into suspensions of three microbial species: Streptococcus gordonii, Streptococcus oralis, and Candida albicans. Optical density was measured to determine the microbial growth in the presence of MPs for testing their antimicrobial activity. MPs at 5% (w/w) were mixed with dental polymers and dispersants to 3DP discs. These microbial species were then seeded onto the discs and incubated for 24 h. The antibacterial and antifungal activities of MP-containing 3DPs were evaluated by counting the colony-forming units (n = 3). The biofilm formation on the 3DP was assessed by crystal violet staining assay (n = 3). Microbial viability was determined using a live-dead staining and CLSM observation (n = 3). Surface roughness and water contact angle were assessed (n = 10). Cytotoxicity of MP-containing 3DPs for human gingival fibroblast was evaluated by MTT assay. RESULTS: MPs, particularly (-)-α-pinene, suppressed the growth of all tested microbial species. MP-containing 3DPs significantly reduced the colony count (P ≤ 0.001) and biofilm formation (P ≤ 0.009), of all tested microbial species. Both surface roughness (P < 0.001) and water contact angle (P < 0.001) increased. The cytotoxicity remained unchanged after incorporating MPs to the 3DPs (P = 0.310). CONCLUSIONS: MPs effectively controlled the microbial growth on 3DPs as evidenced by the colony count, biofilm formation, and cell viability. Although MPs modified the surface characteristics, they did not influence the cytotoxicity of 3DPs. CLINICAL SIGNIFICANCE: Integration of MPs into 3DPs could produce dental prostheses or appliances with antimicrobial properties. This approach not only provides a proactive solution to reduce the risk of oral biofilm-related infection but also ensures the safety and biocompatibility of the material, thereby improving dental care.

Tooth morphology, internal fit, occlusion and proximal contacts of dental crowns designed by deep learning-based dental software: A comparative study.

OBJECTIVES: This study compared the tooth morphology, internal fit, occlusion, and proximal contacts of dental crowns automatically generated via two deep learning (DL)-based dental software systems with those manually designed by an experienced dental technician using conventional software. METHODS: Thirty partial arch scans of prepared posterior teeth were used. The crowns were designed using two DL-based methods (AA and AD) and a technician-based method (NC). The crown design outcomes were three-dimensionally compared, focusing on tooth morphology, internal fit, occlusion, and proximal contacts, by calculating the geometric relationship. Statistical analysis utilized the independent t-test, Mann-Whitney test, one-way ANOVA, and Kruskal-Wallis test with post hoc pairwise comparisons (α = 0.05). RESULTS: The AA and AD groups, with the NC group as a reference, exhibited no significant tooth morphology discrepancies across entire external or occlusal surfaces. The AD group exhibited higher root mean square and positive average values on the axial surface (P < .05). The AD and NC groups exhibited a better internal fit than the AA group (P < .001). The cusp angles were similar across all groups (P = .065). The NC group yielded more occlusal contact points than the AD group (P = .006). Occlusal and proximal contact intensities varied among the groups (both P < .001). CONCLUSIONS: Crowns designed by using both DL-based software programs exhibited similar morphologies on the occlusal and axial surfaces; however, they differed in internal fit, occlusion, and proximal contacts. Their overall performance was clinically comparable to that of the technician-based method in terms of the internal fit and number of occlusal contact points. CLINICAL SIGNIFICANCE: DL-based dental software for crown design can streamline the digital workflow in restorative dentistry, ensuring clinically-acceptable outcomes on tooth morphology, internal fit, occlusion, and proximal contacts. It can minimize the necessity of additional design optimization by dental technician.

Exploring Differences in Surgical Outcomes Depending on the Arterial Cannulation Strategy for Acute Type A Aortic Dissection: A Single-Center Study.

Background: Type A aortic dissection (AD) and intramural hematoma (IMH) are critical medical conditions. Emergency surgery is typically performed under cardiopulmonary bypass immediately after diagnosis, which involves lowering the body temperature to induce total circulatory arrest. Selection of the arterial cannulation site is a critical consideration in cardiac surgery and becomes more challenging in patients with AD. This study explored the strengths and weaknesses of different cannulation methods by comparing each cannulation strategy and analyzing the reasons for patients' outcomes, especially mortality and cerebrovascular accidents (CVAs). Methods: This retrospective study reviewed the medical records of patients who underwent surgery for type A AD or IMH between 2008 and 2023, using the moderate hypothermic circulatory arrest approach at a single center. Results: Among the 146 patients reviewed, 32 underwent antegrade cannulation via axillary, innominate artery, aortic, or transapical cannulation, while 114 underwent retrograde cannulation via the femoral artery. The analysis of surgical outcomes revealed a significant difference in the total surgical time, with 356 minutes for antegrade and 443 minutes for retrograde cannulation (p<0.001). The mean length of stay in the intensive care unit was significantly longer in the retrograde group (5±16 days) than in the antegrade group (3±5 days, p=0.013). Nevertheless, no significant difference was found between the groups in the 30-day mortality or postoperative CVA rates (p=0.2 and p=0.7, respectively). Conclusion: Surgeons should consider an appropriate cannulation strategy for each patient instead of adhering strictly to a specific approach in AD surgery.

Differences in Treatment Outcomes According to the Insertion Method Used in Extracorporeal Cardiopulmonary Resuscitation: A Single-Center Experience.

Background: Venoarterial extracorporeal membrane oxygenation (ECMO) is a key treatment method used with patients in cardiac arrest who do not respond to medical treatment. A critical step in initiating therapy is the insertion of ECMO cannulas. Peripheral ECMO cannulation methods have been preferred for extracorporeal cardiopulmonary resuscitation (ECPR). Methods: Patients who underwent ECPR at Daegu Catholic University Medical Center between January 2017 and May 2023 were included in this study. We analyzed the impact of 2 different peripheral cannulation strategies (surgical cutdown vs. percutaneous cannulation) on various factors, including survival rate. Results: Among the 99 patients included in this study, 66 underwent surgical cutdown, and 33 underwent percutaneous insertion. The survival to discharge rates were 36.4% for the surgical cutdown group and 30.3% for the percutaneous group (p=0.708). The ECMO insertion times were 21.3 minutes for the surgical cutdown group and 10.3 minutes for the percutaneous group (p<0.001). The factors associated with overall mortality included a shorter low-flow time (hazard ratio [HR], 1.045; 95% confidence interval [CI], 1.019-1.071; p=0.001) and whether return of spontaneous circulation was achieved (HR, 0.317; 95% CI, 0.127-0.787; p=0.013). Low-flow time was defined as the time from the start of cardiopulmonary resuscitation to the completion of ECMO cannula insertion. Conclusion: No statistically significant difference in in-hospital mortality was observed between the surgical and percutaneous groups. However, regardless of the chosen cannulation strategy, reducing ECMO cannulation time was beneficial, as a shorter low-flow time was associated with significant benefits in terms of survival.

Exploring negative thermal expansion materials with bulk framework structures and their relevant scaling relationships through multi-step machine learning.

Discovering new negative thermal expansion (NTE) materials is a great challenge in experiment. Meanwhile, the machine learning (ML) method can be another approach to explore NTE materials using the existing material databases. Herein, we adopt the multi-step ML method with efficient data augmentation and cross-validation to identify around 1000 materials, including oxides, fluorides, and cyanides, with bulk framework structures as new potential NTE candidate materials from ICSD and other databases. Their corresponding coefficients of negative thermal expansion (CNTE) and temperature ranges are also well predicted. Among them, about 57 materials are predicted to have an NTE probability of 100%. Some predicted NTE materials were tested by the first-principles calculations with quasi-harmonic approximation (QHA), which indicates that the ML results are in good agreement with the first principles calculation results. Based on the comprehensive analysis of the existing and predicted NTE materials, we established three universal relationships of CNTE with an average electronegativity, porosity, and temperature range. From these, we also identified some important critical values characterizing the NTE property, which can serve as an important criterion for designing new NTE materials.

Deep learning-designed implant-supported posterior crowns: Assessing time efficiency, tooth morphology, emergence profile, occlusion, and proximal contacts.

OBJECTIVES: To compare implant supported crowns (ISCs) designed using deep learning (DL) software with those designed by a technician using conventional computer-aided design software. METHODS: Twenty resin-based partially edentulous casts (maxillary and mandibular) used for fabricating ISCs were evaluated retrospectively. ISCs were designed using a DL-based method with no modification of the as-generated outcome (DB), a DL-based method with further optimization by a dental technician (DM), and a conventional computer-aided design method by a technician (NC). Time efficiency, crown contour, occlusal table area, cusp angle, cusp height, emergence profile angle, occlusal contacts, and proximal contacts were compared among groups. Depending on the distribution of measured data, various statistical methods were used for comparative analyses with a significance level of 0.05. RESULTS: ISCs in the DB group showed a significantly higher efficiency than those in the DM and NC groups (P ≤ 0.001). ISCs in the DM group exhibited significantly smaller volume deviations than those in the DB group when superimposed on ISCs in the NC group (DB-NC vs. DM-NC pairs, P ≤ 0.008). Except for the number and intensity of occlusal contacts (P ≤ 0.004), ISCs in the DB and DM groups had occlusal table areas, cusp angles, cusp heights, proximal contact intensities, and emergence profile angles similar to those in the NC group (P ≥ 0.157). CONCLUSIONS: A DL-based method can be beneficial for designing posterior ISCs in terms of time efficiency, occlusal table area, cusp angle, cusp height, proximal contact, and emergence profile, similar to the conventional human-based method. CLINICAL SIGNIFICANCE: A deep learning-based design method can achieve clinically acceptable functional properties of posterior ISCs. However, further optimization by a technician could improve specific outcomes, such as the crown contour or emergence profile angle.

Topographical and crystalline change on surface by sandblasting improve flexural and shear bond strength of niobia-modified yttria-stabilized tetragonal zirconia polycrystal.

This study aimed to investigate the effects of sandblasting on the physical properties and bond strength of two types of translucent zirconia: niobium-oxide-containing yttria-stabilized tetragonal zirconia polycrystals ((Y, Nb)-TZP) and 5 mol% yttria-partially stabilized zirconia (5Y-PSZ). Fully sintered disc specimens were either sandblasted with 125 µm alumina particles or left as-sintered. Surface roughness, crystal phase compositions, and surface morphology were explored. Biaxial flexural strength (n=10) and shear bond strength (SBS) (n=12) were evaluated, including thermocycling conditions. Results indicated a decrease in flexural strength of 5Y-PSZ from 601 to 303 MPa upon sandblasting, while (Y, Nb)-TZP improved from 458 to 544 MPa. Both materials significantly increased SBS after sandblasting (p<0.001). After thermocycling, (Y, Nb)-TZP maintained superior SBS (14.3 MPa) compared to 5Y-PSZ (11.3 MPa) (p<0.001). The study concludes that (Y, Nb)-TZP is preferable for sandblasting applications, particularly for achieving durable bonding without compromising flexural strength.

Integrated "-omics" analysis highlights the role of brassinosteroid signaling and antioxidant machinery underlying improved rice seed longevity during artificial aging treatment.

Seed longevity is a critical characteristic in agriculture, yet the specific genes/proteins responsible for this trait and the molecular mechanisms underlying reduced longevity during seed aging remain largely elusive. Here we report the comparative proteome and metabolome profiling of three rice cultivars exhibiting varying degrees of aging tolerance: Dharial, an aging-tolerant cultivar; Ilmi, an aging-sensitive cultivar; and A2, a moderately aging-tolerant cultivar developed from the crossbreeding of Dharial and Ilmi. Artificial aging treatment (AAT) markedly reduced the germination percentage and enhanced the activities of antioxidant enzymes in all the cultivars. Further, proteomics results showed a key role of the ubiquitin (Ub)-proteasome pathway in the degradation of damaged proteins during AAT while other proteases were majorly reduced. In addition, proteins associated with energy production and protein synthesis were strongly reduced in Ilmi while these were majorly increased in A2 and Dharial. These, along with metabolomics results, suggest that Ub-proteasome mediated protein degradation during AAT results in the accumulation of free amino acids in Ilmi while tolerant cultivars potentially utilize those for energy production and synthesis of stress-related proteins, especially hsp20/alpha-crystallin family protein. Additionally, both Dharial and A2 seem to activate brassinosteroid signaling and suppress jasmonate signaling which initiates a signaling cascade that allows accumulation of enzymatic and non-enzymatic antioxidants for efficient detoxification of aging-induced ROS. Taken together, these results provide an in-depth understanding of the aging-induced changes in rice seeds and highlight key pathways responsible for maintaining seed longevity during AAT.

Efficacy of Bleomycin Intralesional Injection for Treating Digital Mucous Cysts: A Comparative Study of Corticosteroid Intralesional Injection and Surgical Excision.

BACKGROUND: Sclerotherapy has shown superior efficacy among the nonsurgical options for managing digital mucous cysts (DMC). Notably, previous research has indicated that bleomycin offers a more favorable side-effect profile and similar efficacy to conventional sclerosing agents. OBJECTIVE: This study aimed to assess the efficacy and safety of bleomycin intralesional injection (ILI) for treating DMC through a comparative analysis of corticosteroid ILI and surgical excision. METHODS: We retrospectively reviewed electronic medical records and clinical photographs. Telephone interviews were conducted to further investigate long-term treatment efficacy, safety, and overall treatment satisfaction. RESULTS: Ten patients underwent surgical excision, and 13 and 15 patients received bleomycin and corticosteroid ILI, respectively. Both surgical excision and bleomycin ILI demonstrated superior treatment efficacy compared to corticosteroid ILI. No statistically significant difference in the treatment effectiveness between surgical excision and bleomycin ILI was observed. No significant adverse effects were observed. In the survey, the level of satisfaction was the highest for bleomycin ILI, followed by surgical excision and corticosteroid ILI. CONCLUSION: This study revealed that bleomycin ILI exhibits a treatment efficacy higher than that of corticosteroid ILI and slightly lower than that of surgical excision, without any side effects. Therefore, bleomycin ILI is a safe and effective therapeutic option for the treatment of DMC.

Coadministration of 6-Shogaol and Levodopa Alleviates Parkinson's Disease-Related Pathology in Mice.

Parkinson's disease (PD) is a neurodegenerative disease caused by the death of dopaminergic neurons in the nigrostriatal pathway, leading to motor and non-motor dysfunctions, such as depression, olfactory dysfunction, and memory impairment. Although levodopa (L-dopa) has been the gold standard PD treatment for decades, it only relieves motor symptoms and has no effect on non-motor symptoms or disease progression. Prior studies have reported that 6-shogaol, the active ingredient in ginger, exerts a protective effect on dopaminergic neurons by suppressing neuroinflammation in PD mice. This study investigated whether cotreatment with 6-shogaol and L-dopa could attenuate both motor and non-motor symptoms and dopaminergic neuronal damage. Both 6-shogaol (20 mg/kg) and L-dopa (80 mg/kg) were orally administered to 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine/probenecid- induced PD model mice for 26 days. The experimental results showed that L-dopa alleviated motor symptoms, but had no significant effect on non-motor symptoms, loss of dopaminergic neuron, or neuroinflammation. However, when mice were treated with 6-shogaol alone or in combination L-dopa, an amelioration in both motor and non-motor symptoms such as depression-like behavior, olfactory dysfunction and memory impairment was observed. Moreover, 6-shogaol-only or co-treatment with 6-shogaol and L-dopa protected dopaminergic neurons in the striatum and reduced neuroinflammation in the striatum and substantia nigra. Overall, these results suggest that 6-shogaol can effectively complement L-dopa by improving non-motor dysfunction and restoring dopaminergic neurons via suppressing neuroinflammation.

Intralesional Methotrexate Injection for the Treatment of Epithelial Crateriform Tumor.

BACKGROUND: Intralesional methotrexate injection (IL-MTX) is an appropriate strategy for treating epithelial crateriform tumors (ECTs) when surgical excision can result in functional or cosmetic defects; however, not all ECTs are responsive to this treatment. OBJECTIVE: This study aimed to evaluate the effectiveness of IL-MTX for ECTs and to determine the differences in clinical response according to the pathological features. METHODS: The medical records of patients treated with IL-MTX for their ECTs were retrospectively reviewed. Effectiveness was evaluated in terms of size reduction and flattening. RESULTS: Twenty-five cases of ECTs with biopsy were included in this study. Eight cases of keratoacanthoma (KA) and 15 cases of squamous cell carcinoma (SCC) were identified, but 2 cases could not be clearly distinguished. Seventeen patients (68%) showed a response after injection, and response rate in KA and SCC were 75% (6/8) and 60% (9/15), respectively. Nine patients showed complete resolution with IL-MTX. Patients received 3 injections, and regression was observed in 7.56 weeks after the first injection. According to histopathological results, patients with KA and SCC received 2 and 3.33 injections, respectively, and complete resolution was observed after 7 and 7.67 weeks, respectively. CONCLUSION: IL-MTX is safe and effective, and could be considered as a useful non-surgical treatment option for ECTs. Both KA and crateriform SCC showed good response; However, KA showed a better response.

A prospective longitudinal study of risk factors for abdominal aortic aneurysm.

The aim of this study was to identify risk factors for abdominal aortic aneurysm (AAA) from the largest Welsh screening cohort to date. Patients were recruited from 1993 (to 2015) as part of the South East Wales AAA screening programme through general practitioners. Demographic data and risk factors were collected by means of a self-report questionnaire. Statistical tests were performed to determine whether associations could be observed between AAA and potential risk factors. Odds ratios (OR) were also calculated for each of the risk factors identified. A total of 6879 patients were included in the study. Two hundred and seventy-five patients (4.0%) presented with AAA, of which 16% were female and 84% were male. Patients with AAA were older than the (no AAA) control group (p < 0.0001). The following risk factors were identified for AAA: family history of AAA (p < 0.0001); history of vascular surgery (p < 0.0001), cerebrovascular accident (p < 0.0001), coronary heart disease (p < 0.0001), diabetes (p < 0.0001), medication (p = 0.0018), claudication (p < 0.0001), smoking history (p = 0.0001) and chronic obstructive pulmonary disorder (p = 0.0007). AAA is associated with classical vascular risk factors, in addition to other less-well-documented risk factors including previous vascular surgery. These findings have practical implications with the potential to improve future clinical screening of patients in order to reduce AAA mortality.