Benign postoperative hepaticojejunostomy stricture: percutaneous recanalisation using the reverse end of a microwire.

AIM: To evaluate the technical feasibility and safety of percutaneous recanalisation of benign postoperative hepaticojejunostomy strictures using the reverse end of a microwire. MATERIALS AND METHODS: Twenty-one patients with benign postoperative hepaticojejunostomy strictures that had failed to recanalise following management with conventional percutaneous techniques from January 2012 to March 2019 were included in the study. The stricture was punctured by the reverse end of a microwire. Subsequently, serial balloon dilatation and covered stent placement was performed. Technical as well as clinical success, complications, and patency of the hepaticojejunostomy were evaluated. RESULTS: Technical success was achieved in 19 of 21 (90.5%) patients. The mean number of treatment sessions was 1.2 (range, 1-2). The obstructive symptoms were resolved within 3 days after the procedure in 19 patients (100%). There were no major complications. The 1-year and 3-year patency rates were 76.9% and 61.5%, respectively. CONCLUSION: Percutaneous recanalisation using the reverse end of a microwire is technically feasible and safe in the treatment of benign postoperative hepaticojejunostomy strictures. This technique is useful when the conventional percutaneous technique cannot be used to cross the stricture.

Transfer printing of vertical-type microscale light-emitting diode array onto flexible substrate using biomimetic stamp.

We report the transfer printing of GaN-based microscale vertical-type light-emitting diodes (µ-VLEDs) using a functional layer and a biomimetic stamp. An oxide-based functional layer is inserted onto the structure of a µ-VLED and used to separate the chip from the µ-VLED wafer by absorbing the pulse of a UV pulse laser during pick-up of the transfer printing process. Polydimethylsiloxane (PDMS)-based biomimetic stamps have been fabricated to mimic the gecko lizard cilia for improved adhesion and repeatability. The biomimetic stamp has an adhesion force of 25.6 N/cm2, which is 12 times the adhesion of a flat stamp; an adhesion force of 10 N/cm2 or more was maintained after 100,000 repeated adhesion tests. A flexible 10 × 10 prototype array on a polyimide substrate was fabricated, and its bending test results indicated that the strain effect on the forward voltage and the output power was less than 1%. The stable bending test results of the prototype indicate that µ-VLEDs using biomimetic stamps allow the necessary stability for practical transfer printing.

Nanoscale heat transport through the hetero-interface of SrRuO3 thin films.

A SrRuO3 thin film has been widely used as a metal electrode in electronic devices based on transition metal oxides, and hence it is important to understand its thermal transport properties to minimize a thermal degradation problem during the device operation. Using the time-domain thermoreflectance measurement technique, we investigate the cross-plane thermal conductivity of the SrRuO3 thin films with a thickness variation from 1 µm to 8 nm. We find that the thermal conductivity is reduced from about 6 W m-1 K-1 for the 1 µm thick film to about 1.2 W m-1 K-1 for the 8 nm thick film, and attribute this behavior to the boundary scattering of thermal carriers which originally have the mean free path of about 20 nm in a bulk state. Also, we observe a clear dip behavior of the thermal conductivity in the intermediate thickness around 30 nm which suggests an existence of a strong scattering source other than the film boundary. We explain this result by considering an additional interfacial scattering at the tetragonal-orthorhombic phase boundary which is formed during the strain relaxation with an increase of the film thickness.

The association between subclinical inflammation and abnormal glucose and lipid metabolisms in normal-weight Korean individuals.

BACKGROUNDS AND AIMS: We aimed to reveal the association between subclinical inflammation and metabolic risk factors and to determine the difference in the association between normal-weight and obese Korean individuals. METHODS AND RESULTS: Data collected from the Korean National Health and Nutrition Examination Survey (KNHANES) 2015, conducted from January to December 2015, were analyzed. Overall, 4620 subjects were examined and divided into two subgroups: 2987 and 1633 subjects in the normal-weight and obese groups, respectively. The prevalence of obesity in the study population was 34.5% (n = 1633). After multivariate adjustment, impaired fasting glucose (IFG) (odds ratio [OR] 1.22, 95% confidence interval [CI] 1.05-1.42, P = 0.010), high triglyceride (TG) levels (OR 1.29, 95% CI 1.13-1.47, P < 0.001), and low high-density lipoprotein-cholesterol (HDL-C) levels (OR 1.47, 95% CI 1.31-1.64, P < 0.001) were significantly associated with increased high-sensitivity C-reactive protein (hs-CRP) levels in the normal-weight group but not in the obesity group. CONCLUSION: Subclinical inflammation was associated with IFG, high TG levels, and low HDL-C levels in normal-weight Korean individuals. Prospective and biochemical research is necessary to clarify the role of subclinical systemic inflammation in individuals with normal body weight and its impact on insulin resistance and abnormal lipid metabolism, which promote the incidence of metabolic syndrome and cardiovascular disease.

Upregulation of lipocalin-2 (LCN2) in osteoarthritic cartilage is not necessary for cartilage destruction in mice.

OBJECTIVE: Lipocalin-2 (LCN2) is a recently characterized adipokine that is upregulated in chondrocytes treated with pro-inflammatory mediators and in the synovial fluid of osteoarthritis (OA) patients. Here, we explored the in vivo functions of LCN2 in OA cartilage destruction in mice. METHODS: The expression levels of LCN2 were determined at the mRNA and protein levels in primary cultured mouse chondrocytes and in human and mouse OA cartilage. Experimental OA was induced in wild-type (WT) or Lcn2-knockout (KO) mice by destabilization of the medial meniscus (DMM) or intra-articular (IA) injection of adenoviruses expressing hypoxia-inducible factor (HIF)-2α (Ad-Epas1), ZIP8 (Ad-Zip8), or LCN2 (Ad-Lcn2). The effect of LCN2 overexpression on the cartilage of WT mice was examined by IA injection of Ad-Lcn2. RESULTS: LCN2 mRNA levels in chondrocytes were markedly increased by the pro-inflammatory cytokines, interleukin (IL)-1ß and tumor necrosis factor-α (TNF-α), and by previously identified catabolic regulators of OA, such as HIF-2α and components of the zinc-ZIP8-MTF1 axis. LCN2 protein levels were also markedly increased in human OA cartilage and cartilage from various experimental mouse models of OA. However, overexpression of LCN2 in chondrocytes did not modulate the expression of cartilage matrix molecules or matrix-degrading enzymes. Furthermore, LCN2 overexpression in mouse cartilage via IA injection of Ad-Lcn2 did not cause OA pathogenesis, and Lcn2 KO mice showed no alteration in DMM-induced OA cartilage destruction. CONCLUSIONS: Our observations collectively suggest that upregulation of LCN2 in OA cartilage is not sufficient or necessary for OA cartilage destruction in mice.

Biological Behavior of Osteoblast Cell and Apatite Forming Ability of the Surface Modified Ti Alloys.

Titanium as one kind of biomaterials comes in direct contact with the body, making evaluation of biocompatibility an important aspect to biomaterials development. Surface chemistry of titanium plays an important role in osseointegration. Different surface modification alters the surface chemistry and result in different biological response. In this study, three kinds of mixed acid solutions were used to treat Ti specimens to induce Ca-P formation. Following a strong mixed acid activation process, Ca-P coating successfully formed on the Ti surfaces in simulated body fluid. Strong mixed acid increased the roughness of the metal surface, because the porous and rough surface allows better adhesion between Ca-P coatings and substrates. After modification of titanium surface by mixed acidic solution and subsequently H2O2/HCL treatment evaluation of biocompatibility was conducted from hydroxyapatite formation by biomimetic process and cell viability on modified titanium surface. Nano-scale modification of titanium surfaces can alter cellular and tissue responses, which may benefit osseointegration and dental implant therapy. Results from this study indicated that surface treatment methods affect the surface morphology, type of TiO2 layer formed and subsequent apatite deposition and biological responses. The thermo scientific alamarblue cell viability assay reagent is used to quantitatively measure the viability of mammalian cell lines, bacteria and fungi by incorporating a rapid, sensitive and reliable fluorometric/colorimetric growth indicator, without any toxic and side effect to cell line. In addition, mixed acid treatment uses a lower temperature and shorter time period than widely used alkali treatment.

Efficacy and safety of ursodeoxycholic acid composite on fatigued patients with elevated liver function and/or fatty liver: a multi-centre, randomised, double-blinded, placebo-controlled trial.

AIM: The aim of this study was to assess the effects of ursodeoxycholic acid composite (URSA-S) on fatigue in patients with elevated liver function tests and/or fatty liver disease. METHODS: In this multi-centre randomised double-blinded placebo-controlled trial, 168 adults who were diagnosed with fatigue based on our criteria and had elevated liver function tests (but not > 5 times the normal level) and/or fatty liver on ultrasonography, were randomised to either the placebo or URSA-S administration group. The rate of improvement of checklist individual strength (CIS) using a cut-off of 76 points at the end of the study (8 weeks), the change in fatigue scale [CIS score and visual analogue scale (VAS)] were evaluated. The adverse effects of URSA-S were also recorded. RESULTS: The rate of CIS improvement at the end-point was 79.76% and 45.68% in the therapy and placebo groups, respectively (p < 0.05). The fatigue recovery rate of the CIS score and VAS were higher in the therapy (-25.44 ± 18.57, -27.84 ± 2.70) than in the placebo group (-16.59 ± 17.29, -19.46 ± 2.81) (p < 0.05). The difference in fatigue recovery rate between the therapy and placebo groups was significant after 8 weeks. When analysed separately in patients with abnormal liver function tests and fatty liver disease, the fatigue recovery rate of the CIS score and VAS at 8 weeks was higher in the therapy than in the placebo group (p < 0.05). The frequency of adverse events in the therapy group was not significantly higher than that in the placebo group. CONCLUSION: URSA-S is effective for alleviating fatigue in patients with liver dysfunction and/or fatty liver. The adverse effects of URSA-S are not significant. This study is registered at https://clinicaltrials.gov/ct2/show/NCT02415777.

Viral load dynamics in adult patients with A(H1N1)pdm09 influenza.

SUMMARY The dynamics of influenza A viral load in respiratory samples collected from adult A(H1N1)pdm09 influenza patients were investigated. Three respiratory specimens were obtained every 2-4 days and clinical findings were recorded at the time each specimen was collected. A total of 105 serial specimens were collected from 35 patients. Viral clearance was more rapid in patients aged 15-29 years than patients aged 30-49 years (P < 0.01) or ≥ 50 years (P < 0.01). Hospitalized patients showed slow viral clearance compared to outpatients (P < 0.01). Resolution of cough and headache was correlated with viral load reduction in respiratory specimens. Viral shedding was found in 17 patients (48.6%) 5 days after symptom onset. Time to hospital visit after symptom onset was significantly correlated with prolonged viral shedding (odds ratio 9.0, 95% confidence interval 1.56-51.87, P = 0.01). These findings will contribute to infection control aspects with respect to managing patients with influenza virus infections.

Reduction of experimental diabetic vascular leakage and pericyte apoptosis in mice by delivery of αA-crystallin with a recombinant adenovirus.

AIMS/HYPOTHESIS: The study aimed to evaluate the efficacy of recombinant adenovirus expressing αA-crystallin (Ad-αAc-Gfp) in reducing pericyte loss within retinal vasculature in early diabetes. METHODS: Diabetes was induced by streptozotocin injection into C57BL/6 mice. Ad-αAc-Gfp was delivered by intravitreous injection to the right eyes of mice 2 weeks before induction of diabetes. Vascular leakage was determined by fluorescent angiography, Evans Blue leakage assay and leucocyte adhesion test. Production of αA-crystallin was analysed by immunoblotting and double immunostaining and pericyte loss was analysed by pericyte count. RESULTS: Vessel leakage and pericyte loss were observed in the streptozotocin-induced diabetic retina. Decreased abundance of αA-crystallin in retinas 2 and 6 months after the induction of diabetes was confirmed by two-dimensional electrophoretic analysis, immunoblotting and RT-PCR. Double immunofluorescence staining for αA-crystallin and NG2 chondroitin sulphate proteoglycan revealed that αA-crystallin was predominantly produced in the retinal pericyte and that the number of αA-crystallin-producing pericytes decreased in the diabetic retina. Retinal infection with Ad-αAc-Gfp led to decreased pericyte loss and vascular leakage compared with control. CONCLUSIONS/INTERPRETATION: Intravitreal delivery of Ad-αAc-Gfp protects against vascular leakage in the streptozotocin-induced model of diabetes. This effect is associated with the inhibition of diabetic retinal pericyte loss in early diabetes, suggesting that αA-crystallin has a role in preventing the pathogenesis of early diabetic retinopathy.

Wafer as an adjunct to plating patient-specific implants for the multi-segment maxilla: a useful tool.

Virtual surgical planning for orthognathic surgery using patient-specific implants (PSI) is usually waferless nowadays. However, without an occlusal wafer, difficulties arise in controlling the accuracy of multi-segment maxillary osteotomies, especially for expansion and rotational movements of each segment. It is technically challenging intraoperatively to manipulate multiple segments to fit into the PSI, as the relatively small bone segments need to be secured into the PSI while simultaneously achieving individual segment movements in all planes and with potential bony interferences with each other. Therefore, the use of a maxillary tooth-supported surgical guide is proposed and described. When the guide is inserted before the PSI, it overcomes difficulties in handling multiple maxillary segments and facilitates achieving maximal positional precision of each individual bone segment. The guide enables multiple smaller segments to behave as one unit with the designated occlusion whilst visualizing bony interferences before PSI plating is commenced. Adding a tooth-borne surgical guide in the form of a wafer and a customized arch bar is a cost-effective method to enhance accuracy in virtually planned multi-segment maxillary surgery. Further investigations are required to validate the accuracy and advantages of using wafers and PSI in multi-segment maxillary and mandibular orthognathic surgeries.

Spatial deviations of the temporomandibular joint after oncological mandibular reconstruction.

Spatial deviations of the temporomandibular joint (TMJ) after oncological mandibular reconstruction are important to the aesthetic and functional rehabilitation. The aim of this study was to clarify whether and how three dimensionally (3D) printed patient-specific surgical plates, and the preservation of the condyle or ramus, affect spatial deviations of the TMJ. A total of 33 patients who underwent mandibular reconstruction via computer-assisted surgery were included. Regarding absolute deviations, patients in the 3D-printed plate group showed smaller TMJ deviations compared to those in the conventional plate group. There was no difference in absolute deviations of the TMJ regardless of whether the condyle or ramus was preserved. Regarding physiological deviations, the impact on the contralateral TMJ was smaller in the 3D-printed plate group. Patients with both the condyle and ramus removed had significantly higher deviations of the condyle and joint space. In summary, 3D-printed patient-specific surgical plates improved the spatial accuracy of the TMJ. Under physiological conditions, TMJ deviations on the operated side were mainly affected by the preservation of the condyle. Removal of both the condyle and ramus caused more severe spatial interference to the TMJ; this should be further confirmed.

Timeliness of MMR vaccination and barriers to vaccination in preschool children.

The documented vaccine coverage rate of measles-mumps-rubella (MMR) vaccination is almost 99% in Korea, but measles cases are constantly being reported. This study evaluated the vaccine coverage, timeliness, and barriers to immunization of measles vaccination in preschool children in Korea. We assessed 452 children aged 15-23 months and 300 children aged 4-6 years in September 2007. Questionnaires were administered in order to estimate measles vaccination rate, its timeliness and barriers to vaccine uptake. Being unaware of the necessity for vaccination and its schedule, child being sick during the recommended vaccination period, and recommended vaccination period not being over were significant preventive factors to timely vaccination (P < 0·05). Children with working mothers, single parents, those not being cared for by their parents, and those younger among siblings were at a higher risk of not being vaccinated on time. In order to increase timely vaccination, accurate information should be delivered and a systematic approach should be targeted to high-risk groups.

Surgical morbidities of sagittal split ramus osteotomy versus intraoral vertical ramus osteotomy for the correction of mandibular prognathism: a randomized clinical trial.

The sagittal split ramus osteotomy (SSRO) and intraoral vertical ramus osteotomy (IVRO) are two common orthognathic procedures for the treatment of mandibular prognathism. This randomized clinical trial compared the surgical morbidities between SSRO and IVRO for patients with mandibular prognathism over the first 2 years postoperative. Ninety-eight patients (40 male, 58 female) with a mean age of 24.4±3.5 years underwent bilateral SSRO (98 sides) or IVRO (98 sides) as part or all of their orthognathic surgery. IVRO presented less short-term and long-term surgical morbidity in general. The SSRO group had a greater incidence of inferior alveolar nerve deficit at all follow-up time points (P< 0.01). There was more TMJ pain at 6 weeks (P= 0.047) and 3 months (P= 0.001) postoperative in the SSRO group. The SSRO group also presented more minor complications, which were related to titanium plate exposure and infection. There were no major complications for either technique in this study. Despite the need for intermaxillary fixation, IVRO appears to be associated with less surgical morbidity than SSRO when performed as a mandibular setback procedure to treat mandibular prognathism.

Two-dimensional confinement of 3d{1} electrons in LaTiO_{3}/LaAlO{3} multilayers.

We report spectroscopic ellipsometry measurements of the anisotropy of the interband transitions parallel and perpendicular to the planes of (LaTiO3)n(LaAlO3)5 multilayers with n=1-3. These provide direct information about the electronic structure of the two-dimensional (2D) 3d{1} state of the Ti ions. In combination with local density approximation, including a Hubbard U calculation, we suggest that 2D confinement in the TiO2 slabs lifts the degeneracy of the t{2g} states leaving only the planar d{xy} orbitals occupied. We outline that these multilayers can serve as a model system for the study of the t{2g} 2D Hubbard model.

Evidence for HTR1A and LHPP as interacting genetic risk factors in major depression.

The HTR1A -1019C>G genotype was associated with major depression in the Utah population. Linkage analysis on Utah pedigrees with strong family histories of major depression including only cases with the HTR1A -1019G allele revealed a linkage peak on chromosome 10 (maximum HLOD=4.4). Sequencing of all known genes in the linkage region revealed disease-segregating single-nucleotide polymorphisms (SNPs) in LHPP. LHPP SNPs were also associated with major depression in both Utah and Ashkenazi populations. Consistent with the linkage evidence, LHPP associations depended on HTR1A genotype. Lhpp or a product of a collinear brain-specific transcript, therefore, may interact with Htr1a in the pathogenesis of major depression.

"One-piece" patient-specific reconstruction plate for double-barrel fibula-based mandibular reconstruction.

Segmental mandibular defects require reconstruction. The fibula flap serves as a versatile flap in restoring mandibular contour and bony height. With the advances in computer-aided design and additive manufacturing technology, an innovative "one-piece" patient-specific reconstruction plate to facilitate double-barrel fibula flap shaping and bone securing was developed; the plate is described in this study. The "one-piece" plate is fabricated with individualized specifications and is mainly composed of three components: the long-bar reconstruction plate, a short-bar plate, and connecting bars. Our initial experiences showed that mandibular reconstructive surgery was greatly facilitated by the "one-piece" reconstruction plate for double-barrel fibula flap reconstruction and achieved satisfactory outcomes. A well-designed clinical trial is required to confirm the superiority of the "one-piece" reconstruction plate in the future. ClinicalTrials.gov registration: NCT03057223.

Timing of antibiotics in septic patients: a prospective cohort study.

OBJECTIVES: To evaluate the effect of timing and appropriateness of antibiotics administration on mortality in patients diagnosed with sepsis according to the Sepsis-3 definition. METHODS: This prospective cohort study was conducted in patients diagnosed with sepsis according to the Sepsis-3 definition at the emergency department of Korea University Ansan Hospital from January 2016 to January 2019. The time to antibiotics was defined as the time in hours from emergency department arrival to the first antibiotic administration. Cox proportional hazards regression analysis was used to estimate the association between time to antibiotics and 7-, 14- and 28-day mortality. RESULTS: Of 482 patients enrolled onto this study, 203 (42.1%) of 482 and 312 (64.7%) of 482 were diagnosed with septic shock and high-grade infection respectively. The median time to receipt of antibiotic therapy was 115 minutes. Antibiotics were administered within 3 and 6 hours in 340 (70.4%) of 482 and 450 (93.2%) of 482 patients respectively. Initial appropriate empirical antibiotics were administered in 375 (77.8%) of 482 patients. The time to and appropriateness of the initial antibiotics were not associated with 7-, 14- and 28-day mortality in multivariate analysis. The Sequential Organ Failure Assessment (SOFA) score (adjusted hazard ratio (aHR) 1.229, 95% confidence interval (CI) 1.093-1.381, p 0.001) and initial lactate levels (aHR 1.128, 95% CI 1.034-1.230, p 0.007), Charlson comorbidity index (aHR 1.115, 95% CI 1.027-1.210, p 0.014), 2-hour lactate level (aHR 1.115, 95% CI 1.027-1.210, p 0.009) and SOFA score (aHR 1.077, 95% CI 1.013-1.144, p 0.018) affected 7-, 14- and 28-day mortality respectively. Subgroup analysis with septic shock, bacteraemia and high-grade infection did not affect mortality rates. CONCLUSIONS: Time to receipt of antibiotics may not affect the prognosis of patients with sepsis if a rapid and well-trained resuscitation is combined with appropriate antibiotic administration within a reasonable time.

A novel 'surgeon-dominated' approach to the design of 3D-printed patient-specific surgical plates in mandibular reconstruction: a proof-of-concept study.

Three-dimensionally (3D) printed patient-specific surgical plates have been proposed to facilitate mandibular reconstruction and are attracting extensive attention. We have recently reported the high accuracy of 3D-printed patient-specific surgical plates used in head and neck reconstruction. Based on this previous work, the current study proposes a novel 'surgeon-dominated' approach to the design of 3D-printed patient-specific surgical plates. The aim of this proof-of-concept study was to explore the workflow and technical procedures of the surgeon-dominated approach. The workflow includes virtual surgery, the design and printing of patient-specific surgical devices, and real surgery. The prototype of the patient-specific surgical plate was designed by surgeons and further optimized for 3D printing by engineers. Different types of mandibular defect were tested to confirm the wide applicability of this approach. Cases in which this approach was used were reviewed and the duration of time spent on each case studied. Based on a total of 16 patients, the time spent on virtual surgery and plate design was 18.83±13.19hours, and the time taken for 3D printing, post-processing, and product delivery was 162.9±55.15hours. Therefore, this novel surgeon-dominated approach is feasible and time-saving, which would likely promote the wide application of patient-specific surgical plates and lead to a new era of 'digitization and precision' in mandibular reconstruction. ClinicalTrials.gov registration: NCT03057223.