Porous isoreticular non-metal organic frameworks.

Metal-organic frameworks (MOFs) are useful synthetic materials that are built by the programmed assembly of metal nodes and organic linkers1. The success of MOFs results from the isoreticular principle2, which allows families of structurally analogous frameworks to be built in a predictable way. This relies on directional coordinate covalent bonding to define the framework geometry. However, isoreticular strategies do not translate to other common crystalline solids, such as organic salts3-5, in which the intermolecular ionic bonding is less directional. Here we show that chemical knowledge can be combined with computational crystal-structure prediction6 (CSP) to design porous organic ammonium halide salts that contain no metals. The nodes in these salt frameworks are tightly packed ionic clusters that direct the materials to crystallize in specific ways, as demonstrated by the presence of well-defined spikes of low-energy, low-density isoreticular structures on the predicted lattice energy landscapes7,8. These energy landscapes allow us to select combinations of cations and anions that will form thermodynamically stable, porous salt frameworks with channel sizes, functionalities and geometries that can be predicted a priori. Some of these porous salts adsorb molecular guests such as iodine in quantities that exceed those of most MOFs, and this could be useful for applications such as radio-iodine capture9-12. More generally, the synthesis of these salts is scalable, involving simple acid-base neutralization, and the strategy makes it possible to create a family of non-metal organic frameworks that combine high ionic charge density with permanent porosity.

A mobile robotic chemist.

Technologies such as batteries, biomaterials and heterogeneous catalysts have functions that are defined by mixtures of molecular and mesoscale components. As yet, this multi-length-scale complexity cannot be fully captured by atomistic simulations, and the design of such materials from first principles is still rare1-5. Likewise, experimental complexity scales exponentially with the number of variables, restricting most searches to narrow areas of materials space. Robots can assist in experimental searches6-14 but their widespread adoption in materials research is challenging because of the diversity of sample types, operations, instruments and measurements required. Here we use a mobile robot to search for improved photocatalysts for hydrogen production from water15. The robot operated autonomously over eight days, performing 688 experiments within a ten-variable experimental space, driven by a batched Bayesian search algorithm16-18. This autonomous search identified photocatalyst mixtures that were six times more active than the initial formulations, selecting beneficial components and deselecting negative ones. Our strategy uses a dexterous19,20 free-roaming robot21-24, automating the researcher rather than the instruments. This modular approach could be deployed in conventional laboratories for a range of research problems beyond photocatalysis.

Self-Assembly of Chiral Porous Metal-Organic Polyhedra from Trianglsalen Macrocycles.

Metal-organic polyhedra (MOPs) can exhibit tunable porosity and functionality, suggesting potential for applications such as molecular separations. MOPs are typically constructed by the bottom-up multicomponent self-assembly of organic ligands and metal ions, and the final functionality can be hard to program. Here, we used trianglsalen macrocycles as preorganized building blocks to assemble octahedral-shaped MOPs. The resultant MOPs inherit most of the preorganized properties of the macrocyclic ligands, including their well-defined cavities and chirality. As a result, the porosity in the MOPs could be tuned by modifying the structure of the macrocycle building blocks. Using this strategy, we could systematically enlarge the size of the MOPs from 26.3 to 32.1 Å by increasing the macrocycle size. The family of MOPs shows experimental surface areas of up to 820 m2/g, and they are stable in water. One of these MOPs can efficiently separate the rare gases Xe from Kr because the prefabricated macrocyclic windows of MOPs can be modified to sit at the Xe/Kr size cutoff range.

Controlling the Crystallisation and Hydration State of Crystalline Porous Organic Salts.

Crystalline porous organic salts (CPOS) are a subclass of molecular crystals. The low solubility of CPOS and their building blocks limits the choice of crystallisation solvents to water or polar alcohols, hindering the isolation, scale-up, and scope of the porous material. In this work, high throughput screening was used to expand the solvent scope, resulting in the identification of a new porous salt, CPOS-7, formed from tetrakis(4-sulfophenyl)methane (TSPM) and tetrakis(4-aminophenyl)methane (TAPM). CPOS-7 does not form with standard solvents for CPOS, rather a hydrated phase (Hydrate2920) previously reported is isolated. Initial attempts to translate the crystallisation to batch led to challenges with loss of crystallinity and Hydrate2920 forming favorably in the presence of excess water. Using acetic acid as a dehydrating agent hindered formation of Hydrate2920 and furthermore allowed for direct conversion to CPOS-7. To allow for direct formation of CPOS-7 in high crystallinity flow chemistry was used for the first time to circumvent the issues found in batch. CPOS-7 and Hydrate2920 were shown to have promise for water and CO2 capture, with CPOS-7 having a CO2 uptake of 4.3 mmol/g at 195 K, making it one of the most porous CPOS reported to date.

Functional materials discovery using energy-structure-function maps.

Molecular crystals cannot be designed in the same manner as macroscopic objects, because they do not assemble according to simple, intuitive rules. Their structures result from the balance of many weak interactions, rather than from the strong and predictable bonding patterns found in metal-organic frameworks and covalent organic frameworks. Hence, design strategies that assume a topology or other structural blueprint will often fail. Here we combine computational crystal structure prediction and property prediction to build energy-structure-function maps that describe the possible structures and properties that are available to a candidate molecule. Using these maps, we identify a highly porous solid, which has the lowest density reported for a molecular crystal so far. Both the structure of the crystal and its physical properties, such as methane storage capacity and guest-molecule selectivity, are predicted using the molecular structure as the only input. More generally, energy-structure-function maps could be used to guide the experimental discovery of materials with any target function that can be calculated from predicted crystal structures, such as electronic structure or mechanical properties.

Experimental Confirmation of a Predicted Porous Hydrogen-Bonded Organic Framework.

Hydrogen-bonded organic frameworks (HOFs) with low densities and high porosities are rare and challenging to design because most molecules have a strong energetic preference for close packing. Crystal structure prediction (CSP) can rank the crystal packings available to an organic molecule based on their relative lattice energies. This has become a powerful tool for the a priori design of porous molecular crystals. Previously, we combined CSP with structure-property predictions to generate energy-structure-function (ESF) maps for a series of triptycene-based molecules with quinoxaline groups. From these ESF maps, triptycene trisquinoxalinedione (TH5) was predicted to form a previously unknown low-energy HOF (TH5-A) with a remarkably low density of 0.374 g cm-3 and three-dimensional (3D) pores. Here, we demonstrate the reliability of those ESF maps by discovering this TH5-A polymorph experimentally. This material has a high accessible surface area of 3,284 m2 g-1 , as measured by nitrogen adsorption, making it one of the most porous HOFs reported to date.

Accelerated Synthesis and Discovery of Covalent Organic Framework Photocatalysts for Hydrogen Peroxide Production.

A high-throughput sonochemical synthesis and testing strategy was developed to discover covalent organic frameworks (COFs) for photocatalysis. In total, 76 conjugated polymers were synthesized, including 60 crystalline COFs of which 18 were previously unreported. These COFs were then screened for photocatalytic hydrogen peroxide (H2O2) production using water and oxygen. One of these COFs, sonoCOF-F2, was found to be an excellent photocatalyst for photocatalytic H2O2 production even in the absence of sacrificial donors. However, after long-term photocatalytic tests (96 h), the imine sonoCOF-F2 transformed into an amide-linked COF with reduced crystallinity and loss of electronic conjugation, decreasing the photocatalytic activity. When benzyl alcohol was introduced to form a two-phase catalytic system, the photostability of sonoCOF-F2 was greatly enhanced, leading to stable H2O2 production for at least 1 week.

A Pyrene-4,5,9,10-Tetraone-Based Covalent Organic Framework Delivers High Specific Capacity as a Li-Ion Positive Electrode.

Electrochemically active covalent organic frameworks (COFs) are promising electrode materials for Li-ion batteries. However, improving the specific capacities of COF-based electrodes requires materials with increased conductivity and a higher concentration of redox-active groups. Here, we designed a series of pyrene-4,5,9,10-tetraone COF (PT-COF) and carbon nanotube (CNT) composites (denoted as PT-COFX, where X = 10, 30, and 50 wt % of CNT) to address these challenges. Among the composites, PT-COF50 achieved a capacity of up to 280 mAh g-1 as normalized to the active COF material at a current density of 200 mA g-1, which is the highest capacity reported for a COF-based composite cathode electrode to date. Furthermore, PT-COF50 exhibited excellent rate performance, delivering a capacity of 229 mAh g-1 at 5000 mA g-1 (18.5C). Using operando Raman microscopy the reversible transformation of the redox-active carbonyl groups of PT-COF was determined, which rationalizes an overall 4 e-/4 Li+ redox process per pyrene-4,5,9,10-tetraone unit, accounting for its superior performance as a Li-ion battery electrode.

Hydrogen Isotope Separation Using a Metal-Organic Cage Built from Macrocycles.

Porous materials that contain ultrafine pore apertures can separate hydrogen isotopes via kinetic quantum sieving (KQS). However, it is challenging to design materials with suitably narrow pores for KQS that also show good adsorption capacities and operate at practical temperatures. Here, we investigate a metal-organic cage (MOC) assembled from organic macrocycles and ZnII ions that exhibits narrow windows (<3.0 Å). Two polymorphs, referred to as 2α and 2ß, were observed. Both polymorphs exhibit D2 /H2 selectivity in the temperature range 30-100 K. At higher temperature (77 K), the D2 adsorption capacity of 2ß increases to about 2.7 times that of 2α, along with a reasonable D2 /H2 selectivity. Gas sorption analysis and thermal desorption spectroscopy suggest a gate-opening effect of the MOCs pore aperture. This promotes KQS at temperatures above liquid nitrogen temperature, indicating that MOCs hold promise for hydrogen isotope separation in real industrial environments.

Inherent Ethyl Acetate Selectivity in a Trianglimine Molecular Solid.

Ethyl acetate is an important chemical raw material and solvent. It is also a key volatile organic compound in the brewing industry and a marker for lung cancer. Materials that are highly selective toward ethyl acetate are needed for its separation and detection. Here, we report a trianglimine macrocycle (TAMC) that selectively adsorbs ethyl acetate by forming a solvate. Crystal structure prediction showed this to be the lowest energy solvate structure available. This solvate leaves a metastable, "templated" cavity after solvent removal. Adsorption and breakthrough experiments confirmed that TAMC has adequate adsorption kinetics to separate ethyl acetate from azeotropic mixtures with ethanol, which is a challenging and energy-intensive industrial separation.

3D Cage COFs: A Dynamic Three-Dimensional Covalent Organic Framework with High-Connectivity Organic Cage Nodes.

Three-dimensional (3D) covalent organic frameworks (COFs) are rare because there is a limited choice of organic building blocks that offer multiple reactive sites in a polyhedral geometry. Here, we synthesized an organic cage molecule (Cage-6-NH2) that was used as a triangular prism node to yield the first cage-based 3D COF, 3D-CageCOF-1. This COF adopts an unreported 2-fold interpenetrated acs topology and exhibits reversible dynamic behavior, switching between a small-pore (sp) structure and a large-pore (lp) structure. It also shows high CO2 uptake and captures water at low humidity (<40%). This demonstrates the potential for expanding the structural complexity of 3D COFs by using organic cages as the building units.

An Expandable Hydrogen-Bonded Organic Framework Characterized by Three-Dimensional Electron Diffraction.

A molecular crystal of a 2-D hydrogen-bonded organic framework (HOF) undergoes an unusual structural transformation after solvent removal from the crystal pores during activation. The conformationally flexible host molecule, ABTPA, adapts its molecular conformation during activation to initiate a framework expansion. The microcrystalline activated phase was characterized by three-dimensional electron diffraction (3D ED), which revealed that ABTPA uses out-of-plane anthracene units as adaptive structural anchors. These units change orientation to generate an expanded, lower density framework material in the activated structure. The porous HOF, ABTPA-2, has robust dynamic porosity (SABET = 1183 m2 g-1) and exhibits negative area thermal expansion. We use crystal structure prediction (CSP) to understand the underlying energetics behind the structural transformation and discuss the challenges facing CSP for such flexible molecules.

Controlling Gas Selectivity in Molecular Porous Liquids by Tuning the Cage Window Size.

Control of pore window size is the standard approach for tuning gas selectivity in porous solids. Here, we present the first example where this is translated into a molecular porous liquid formed from organic cage molecules. Reduction of the cage window size by chemical synthesis switches the selectivity from Xe-selective to CH4 -selective, which is understood using 129 Xe, 1 H, and pulsed-field gradient NMR spectroscopy.

Complex Phase Behaviour and Structural Transformations of Metal-Organic Frameworks with Mixed Rigid and Flexible Bridging Ligands.

Two new heteroleptic metal-organic framework materials show strong adsorption of H2 and ethanol. [Co2 (L1)(bdc)2 ], where L1=N1 ,N4 -bis(4-pyridinylmethyl)-2,5-dimethylbenzene-1,4-diamine and bdc is benzene-1,4-dicarboxylate, has a twofold interpenetrating pillared layer structure with pcu topology. It has a stepped, hysteretic EtOH adsorption that can be related to complicated phase and structural transformation behaviour that occurs on de-solvation and re-solvation, including major conformational changes to the geometry of the flexible L1 ligand. [Co2 (L1)(bpdc)2 ], where bpdc=biphenyl-4,4'-dicarboxylate, has a unique six-connected self-catenating framework structure. Solvation changes occur without significant structural change and a partially-hydrolysed material binds its own decomposition products as guests.

Core-Shell Crystals of Porous Organic Cages.

The first examples of core-shell porous molecular crystals are described. The physical properties of the core-shell crystals, such as surface hydrophobicity, CO2 /CH4 selectivity, are controlled by the chemical composition of the shell. This shows that porous core-shell molecular crystals can exhibit synergistic properties that out-perform materials built from the individual, constituent molecules.

Porous Organic Cages for Sulfur Hexafluoride Separation.

A series of porous organic cages is examined for the selective adsorption of sulfur hexafluoride (SF6) over nitrogen. Despite lacking any metal sites, a porous cage, CC3, shows the highest SF6/N2 selectivity reported for any material at ambient temperature and pressure, which translates to real separations in a gas breakthrough column. The SF6 uptake of these materials is considerably higher than would be expected from the static pore structures. The location of SF6 within these materials is elucidated by X-ray crystallography, and it is shown that cooperative diffusion and structural rearrangements in these molecular crystals can rationalize their superior SF6/N2 selectivity.

Bis-Calix[4]arenes: From Ligand Design to the Directed Assembly of a Metal-Organic Trigonal Antiprism.

Calix[4]arenes (C[4]s) are versatile platforms for the construction of polymetallic clusters containing paramagnetic metal ions. Synthetic modification at the C[4] methylene bridge allows for the design of bis-C[4]s that, depending on the linker employed, can be used to either dictate which clusters can be formed or direct the assembly of a new metal-organic polyhedron (MOP). The assembly resulting from the latter approach displays thermal stability and uptake of N2 or H2 gas, confirming that this is a viable route to the synthesis of new, functional supramolecular architectures.

Visible-Light-Driven Hydrogen Evolution Using Planarized Conjugated Polymer Photocatalysts.

Linear poly(p-phenylene)s are modestly active UV photocatalysts for hydrogen production in the presence of a sacrificial electron donor. Introduction of planarized fluorene, carbazole, dibenzo[b,d]thiophene or dibenzo[b,d]thiophene sulfone units greatly enhances the H2 evolution rate. The most active dibenzo[b,d]thiophene sulfone co-polymer has a UV photocatalytic activity that rivals TiO2, but is much more active under visible light. The dibenzo[b,d]thiophene sulfone co-polymer has an apparent quantum yield of 2.3 % at 420 nm, as compared to 0.1 % for platinized commercial pristine carbon nitride.

Metallo-cryptophanes decorated with bis-N-heterocyclic carbene ligands: self-assembly and guest uptake into a nonporous crystalline lattice.

Pd3L2 metallo-cryptophane cages with cyclotriveratrylene-type L ligands can be stabilized by use of a bis-N-heterocyclic carbene as an auxiliary cis-protecting ligand, while use of more common protecting chelating ligands such as ethylenediamine saw a Pd3L2 to Pd6L8 rearrangement occur in solution. The crystalline Pd3L2 complexes act as sponges, taking up 1,2-dichorobenzene or iodine in a single-crystal-to-single-crystal fashion despite not exhibiting conventional porosity.

Modular, multi-robot integration of laboratories: an autonomous workflow for solid-state chemistry.

Automation can transform productivity in research activities that use liquid handling, such as organic synthesis, but it has made less impact in materials laboratories, which require sample preparation steps and a range of solid-state characterization techniques. For example, powder X-ray diffraction (PXRD) is a key method in materials and pharmaceutical chemistry, but its end-to-end automation is challenging because it involves solid powder handling and sample processing. Here we present a fully autonomous solid-state workflow for PXRD experiments that can match or even surpass manual data quality, encompassing crystal growth, sample preparation, and automated data capture. The workflow involves 12 steps performed by a team of three multipurpose robots, illustrating the power of flexible, modular automation to integrate complex, multitask laboratories.