RESUMO
Recycling mixed polyolefin plastics is a significant challenge due to the limitations in sorting and degraded mechanical properties of blends. Nonreactive compatibilization by adding a small amount of polymeric additive is a widespread approach to restoring the performance and value of recycled plastics. Over the past several decades, synthetic advances have enabled access to low-cost copolymers and precision architectures for deepening the understanding of compatibilization mechanisms in semicrystalline polyolefins. This review covers the design parameters of a polymeric compatibilizer, the testing of blends, the synthetic methods of producing economically viable additives, and surveys the literature of blends of compatibilized HDPE, LLDPE, LDPE, and iPP. From this, readers should gain a comprehension of the polymer mechanics, synthesis, and macromolecular engineering of processable polyolefin blends, along with the field's future directions.
RESUMO
Herein, we report that (S,S)-prophenolMg2(µ-OnBu)(THF)2 ((S,S)-1, prophenol = (S,S)-2,6-bis[2-(hydroxydiphenylmethyl)pyrrolidin-1-ylmethyl]-4-methylphenol) is a highly enantioselective (kR/kS = 140) precatalyst for ring-opening polymerization of rac-ß-butyrolactone (ß-BL) to isotactic poly(3-hydroxybutyrate) (i-PHB), a high performance, biodegradable polyester. Precatalyst (S,S)-1 polymerizes (R)-ß-BL with an inversion of stereochemistry to (S)-PHB with a m% (percentage of adjacent linkages with a meso configuration) of 98% at 41% conversion and Tm of 165 °C under a variety of conditions. Complex (S,S)-1 demonstrates unique polymerization kinetics, as it does not polymerize the preferred enantiomer, (R)-ß-BL, alone. Mechanistic studies revealed that (S)-ß-BL is needed to convert (S,S)-1 into the active enantioselective polymerization catalyst. To the best of our knowledge, (S,S)-1 produces i-PHB with the highest degree of isotacticity observed from a polymerization of rac-ß-BL. This study informs the design and understanding of future enantioselective and earth-abundant metal catalysts for ring-opening polymerization of ß-lactones.
RESUMO
Introducing functionality onto PE surfaces is a longstanding challenge in polymer science, driven by the need for polymer materials with improved adhesion and antifouling properties. Herein, we report surface-initiated hydrogen atom transfer-reversible addition-fragmentation chain transfer (SI HAT-RAFT) as a robust method to grow high-density brush polymers from PE surfaces. We demonstrate that, under mild conditions, direct initiation from the C-H bonds of PE surfaces allows for the graft polymerization of a variety of (meth)acrylate monomers. The resulting polymer brushes reached several hundred nanometers in thickness with densities of ca. 0.62 chains/nm2, compared to the current standard of â¼0.28 chains/nm2. Finally, we show that our method is capable of dramatically improving the adhesive properties of PE surfaces. This work enables the preparation of PE with diverse surface functionalities for potential use in biomedical, industrial, and battery applications.
RESUMO
Transforming how plastics are made, unmade, and remade through innovative research and diverse partnerships that together foster environmental stewardship is critically important to a sustainable future. Designing, preparing, and implementing polymers derived from renewable resources for a wide range of advanced applications that promote future economic development, energy efficiency, and environmental sustainability are all central to these efforts. In this Chemical Reviews contribution, we take a comprehensive, integrated approach to summarize important and impactful contributions to this broad research arena. The Review highlights signature accomplishments across a broad research portfolio and is organized into four wide-ranging research themes that address the topic in a comprehensive manner: Feedstocks, Polymerization Processes and Techniques, Intended Use, and End of Use. We emphasize those successes that benefitted from collaborative engagements across disciplinary lines.
Assuntos
Polímeros , Polímeros/químicaRESUMO
Hydrogen energy-based electrochemical energy conversion technologies offer the promise of enabling a transition of the global energy landscape from fossil fuels to renewable energy. Here, we present a comprehensive review of the fundamentals of electrocatalysis in alkaline media and applications in alkaline-based energy technologies, particularly alkaline fuel cells and water electrolyzers. Anion exchange (alkaline) membrane fuel cells (AEMFCs) enable the use of nonprecious electrocatalysts for the sluggish oxygen reduction reaction (ORR), relative to proton exchange membrane fuel cells (PEMFCs), which require Pt-based electrocatalysts. However, the hydrogen oxidation reaction (HOR) kinetics is significantly slower in alkaline media than in acidic media. Understanding these phenomena requires applying theoretical and experimental methods to unravel molecular-level thermodynamics and kinetics of hydrogen and oxygen electrocatalysis and, particularly, the proton-coupled electron transfer (PCET) process that takes place in a proton-deficient alkaline media. Extensive electrochemical and spectroscopic studies, on single-crystal Pt and metal oxides, have contributed to the development of activity descriptors, as well as the identification of the nature of active sites, and the rate-determining steps of the HOR and ORR. Among these, the structure and reactivity of interfacial water serve as key potential and pH-dependent kinetic factors that are helping elucidate the origins of the HOR and ORR activity differences in acids and bases. Additionally, deliberately modulating and controlling catalyst-support interactions have provided valuable insights for enhancing catalyst accessibility and durability during operation. The design and synthesis of highly conductive and durable alkaline membranes/ionomers have enabled AEMFCs to reach initial performance metrics equal to or higher than those of PEMFCs. We emphasize the importance of using membrane electrode assemblies (MEAs) to integrate the often separately pursued/optimized electrocatalyst/support and membranes/ionomer components. Operando/in situ methods, at multiscales, and ab initio simulations provide a mechanistic understanding of electron, ion, and mass transport at catalyst/ionomer/membrane interfaces and the necessary guidance to achieve fuel cell operation in air over thousands of hours. We hope that this Review will serve as a roadmap for advancing the scientific understanding of the fundamental factors governing electrochemical energy conversion in alkaline media with the ultimate goal of achieving ultralow Pt or precious-metal-free high-performance and durable alkaline fuel cells and related technologies.
Assuntos
Fontes de Energia Elétrica , Prótons , Hidrogênio/química , Oxigênio/química , ÁguaRESUMO
Poly(lactic-co-glycolic acid) (PLGA) is used in vivo for various biomedical applications. Due to its biodegradability and biocompatibility, PLGA is uniquely suited for controlled drug delivery with parenteral administration. Previously, we established the synthesis of isotactic, alternating PLGA from enantiopure starting materials. Here, to fill in the gap of the current field, we have developed the synthesis of syndioenriched, alternating PLGA from racemic methyl-glycolide (rac-MeG). The synthesis of alternating PLGA is accomplished by a highly regioselective ring-opening polymerization of rac-MeG with an optimized racemic aluminum catalyst. Mechanistic studies are carried out to elucidate the pairing-enhanced catalyst regio- and stereocontrol. Polymer sequence fidelity has been established by NMR investigations, confirming a high degree of alternation of the comonomer sequence and moderate syndiotacticity within the backbone stereoconfiguration. The resulting syndioenriched material is amorphous, which will facilitate the drug complexation behavior.
Assuntos
Ácido Láctico , Ácido Poliglicólico , Copolímero de Ácido Poliláctico e Ácido Poliglicólico/química , Ácido Poliglicólico/química , Ácido Láctico/química , Glicóis , Sistemas de Liberação de MedicamentosRESUMO
Polyhydroxyalkanoates (PHAs), such as poly[(R)-3-hydroxybutyrates] [(R)-P3HB], are produced by bacteria and are promising alternatives to nondegradable polyolefin plastics, but their semicrystallinity and high melting points are only maintained at high tacticity, which are commonly seen in other semicrystalline polymers like isotactic polypropylene (iPP). We herein report a class of synthetic PHAs, cis-poly(3-hydroxy-2-methylbutyrate)s (cis-PHMBs), that exhibit tacticity-independent semicrystallinity. The syndiotactic, isotactic, and even atactic PHMBs all share high melting points (Tm > 170 °C) and nearly identical crystal structures. The isomorphism of these polymers across three different tacticities has allowed access to iPP-like, high-performance PHMB without the requirement of high tacticity.
RESUMO
We report a method to synthesize ultra-high-molecular-weight poly(1,3-dioxolane) (UHMW pDXL), a chemically recyclable thermoplastic material with excellent physical properties. We aimed to enhance the mechanical properties of sustainable polymers by increasing the molecular weight and found that UHMW pDXL exhibits similar tensile properties to ultra-high-molecular-weight polyethylene (UHMWPE). The new polymerization method uses metal-free and economically friendly initiators to achieve UHMW pDXL with molecular weights greater than 1000 kDa. The development of UHMW pDXL provides a potential solution for capturing value from plastic waste and addressing the detrimental effects of plastic waste.
RESUMO
C-H/Et-Al exchange in zirconium-catalyzed reactions of saturated hydrocarbons and AlEt3 affords versatile organoaluminum compounds and ethane. The grafting of commercially available Zr(OtBu)4 on silica/alumina gives monopodal ≡SiO-Zr(OtBu)3 surface pre-catalyst sites that are activated in situ by ligand exchange with AlEt3. The catalytic C-H alumination of dodecane at 150 °C followed by quenching in air affords n-dodecanol as the major product, revealing selectivity for methyl group activation. Shorter hydrocarbon or alcohol products were not detected under these conditions. Catalytic reactions of cyclooctane and AlEt3, however, afford ring-opened products, indicating that C-C bond cleavage occurs readily in methyl group-free reactants. This selectivity for methyl group alumination enables the C-H alumination of polyethylenes, polypropylene, polystyrene, and poly-α-olefin oils without significant chain deconstruction. In addition, the smallest hydrocarbon, methane, undergoes selective mono-alumination under solvent-free catalytic conditions, providing a direct route to Al-Me species.
RESUMO
Polyolefins with periodic unsaturation in the backbone chain are sought after for synthesizing chemically recyclable polymers or telechelic polyolefin macromonomers. Here we introduce a bottom-up synthesis of unsaturated high-density polyethylene (HDPE) via copolymerization of ethylene with dimethyl 7-oxabicyclo[2.2.1]hepta-2,5-diene-3,5-dicarboxylate followed by post-polymerization retro-Diels-Alder to unveil hidden double bonds in the polymer backbone. The incorporation of this "Trojan Horse" comonomer was varied and a series of unsaturated HDPE polymers with block lengths of 1.2, 1.9, and 3.5â kDa between double bonds was synthesized. Cross metathesis of unsaturated HDPE samples with 2-hydroxyethyl acrylate yielded telechelic ester terminated PE macromonomers suitable for the preparation of ester-linked PE. These materials were depolymerized and repolymerized, making them suitable candidates for chemical recycling. The ester-linked PE displayed thermal and mechanical properties comparable to commercial HDPE.
RESUMO
The limited number of methods to directly polymerize ionic monomers currently hinders rapid diversification and production of ionic polymeric materials, namely anion exchange membranes (AEMs) which are essential components in emerging alkaline fuel cell and electrolyzer technologies. Herein, we report a direct coordination-insertion polymerization of cationic monomers, providing the first direct synthesis of aliphatic polymers with high ion incorporations and allowing facile access to a broad range of materials. We demonstrate the utility of this method by rapidly generating a library of solution processable ionic polymers for use as AEMs. We investigate these materials to study the influence of cation identity on hydroxide conductivity and stability. We found that AEMs with piperidinium cations exhibited the highest performance, with high alkaline stability, hydroxide conductivity of 87â mS cm-1 at 80 °C, and a peak power density of 730â mW cm-2 when integrated into a fuel cell device.
RESUMO
Stereocomplexation is a useful strategy for the enhancement of polymer properties by the co-crystallization of polymer strands with opposed chirality. Yet, with the exception of PLA, stereocomplexes of biodegradable polyesters are relatively underexplored and the relationship between polymer microstructure and stereocomplexation remains to be delineated, especially for copolymers comprising two different chiral monomers. In this work, we resolved the two enantiomers of a non-symmetric chiral anhydride (CPCA) and prepared a series of polyesters from different combinations of racemic and enantiopure epoxides and anhydrides, via metal-catalyzed ring-opening copolymerization (ROCOP). Intriguingly, we found that only specific chiral combinations between the epoxide and anhydride building blocks result in the formation of semicrystalline polymers, with a single stereocenter inversion inducing a change from amorphous to semicrystalline copolymers. Stereocomplexes of the latter were prepared by mixing an equimolar amount of the two enantiomeric copolymers, yielding materials with increased melting temperatures (ca. 20 °C higher) compared to their enantiopure constituents. Following polymer structure optimization, the stereocomplex of one specific copolymer combination exhibits a particularly high melting temperature (Tm = 238 °C).
Assuntos
Poliésteres , Polímeros , Anidridos , Compostos de Epóxi/química , Poliésteres/química , Polimerização , Polímeros/químicaRESUMO
Polyolefins represent the largest class of commodity materials due to their excellent material properties; however, they have limited pathways to chemical recycling and are often difficult to mechanically recycle. Here we demonstrate a new catalyst for the isoselective copolymerization of propylene and butadiene capable of favoring 1,4-insertion over 1,2-insertion while maintaining good molecular weights and turnover frequencies. This isotactic propylene copolymer with main-chain unsaturation was depolymerized to a telechelic macromonomer using an olefin metathesis catalyst and 2-hydroxyethyl acrylate. After hydrogenation, the telechelic macromonomer was repolymerized to form an ester-linked polypropylene material. This polymer shows thermal and mechanical properties comparable to linear low-density polyethylene. Finally, the telechelic macromonomer could be regenerated through the depolymerization of the ester-linked polypropylene material, which allows for the chemical recycling to macromonomer. This process provides a route to transform partially unsaturated polyolefins to chemically recyclable materials with similar properties to their parent polymers.
Assuntos
Ésteres , Polipropilenos , Peso Molecular , Polimerização , Polímeros/químicaRESUMO
Among commercial plastics, polyolefins are the most widely produced worldwide but have limited recyclability. Here, we report a chemical recycling route for the conversion of post-consumer high-density polyethylene (HDPE) into telechelic macromonomers suitable for circular reprocessing. Unsaturation was introduced into HDPE by catalytic dehydrogenation using an Ir-POCOP catalyst without an alkene acceptor. Cross-metathesis with 2-hydroxyethyl acrylate followed by hydrogenation transformed the partially unsaturated HDPE into telechelic macromonomers. The direct repolymerization of the macromonomers gave a brittle material due to the low overall weight-average molecular weight. Aminolysis of telechelic macromonomers with a small amount of diethanolamine increased the overall functionality. The resulting macromonomers were repolymerized through transesterification to generate a polymer with comparable mechanical properties to the starting post-consumer HDPE waste. Depolymerization of the repolymerized material catalyzed by an organic base regenerated the telechelic macromonomers, thereby allowing waste polyethylene materials to enter a chemical recycling pathway.
Assuntos
Plásticos , Polietileno , Polímeros , Resíduos , CatáliseRESUMO
Alkaline anion exchange membranes (AAEMs) are an important component of alkaline exchange membrane fuel cells (AEMFCs), which facilitate the efficient conversion of fuels to electricity using nonplatinum electrode catalysts. However, low hydroxide conductivity and poor long-term alkaline stability of AAEMs are the major limitations for the widespread application of AEMFCs. In this paper, we report the synthesis of highly conductive and chemically stable AAEMs from the living polymerization of trans-cyclooctenes. A trans-cyclooctene-fused imidazolium monomer was designed and synthesized on gram scale. Using these highly ring-strained monomers, we produced a range of block and random copolymers. Surprisingly, AAEMs made from the random copolymer exhibited much higher conductivities than their block copolymer analogs. Investigation by transmission electron microscopy showed that the block copolymers had a disordered microphase segregation which likely impeded ion conduction. A cross-linked random copolymer demonstrated a high level of hydroxide conductivity (134 mS/cm at 80 °C). More importantly, the membranes exhibited excellent chemical stability due to the incorporation of highly alkaline-stable multisubstituted imidazolium cations. No chemical degradation was detected by 1H NMR spectroscopy when the polymers were treated with 2 M KOH in CD3OH at 80 °C for 30 d.
RESUMO
LiNO3 is a widely used salt-additive that markedly improves the stability of ether-based electrolytes at a Li metal anode but is generally regarded as incompatible with alkyl carbonates. Here we find that contrary to common wisdom, cyclic carbonate solvents such as ethylene carbonate can dissolve up to 0.7â M LiNO3 without any additives, largely improving the anode reversibility. We demonstrate the significance of our findings by upgrading various state-of-the-art carbonate electrolytes with LiNO3 , which provides large improvements in batteries composed of thin lithium (50â µm) anode and high voltage cathodes. Capacity retentions of 90.5 % after 600 cycles and 92.5 % after 200 cycles are reported for LiNi0.6 Mn0.2 Co0.2 O2 (2â mAh cm-2 , 0.5â C) and LiNi0.8 Mn0.1 Co0.1 O2 cathode (4â mAh cm-2 , 0.2â C), respectively. 1â Ah pouch cells (≈300â Wh kg-1 ) retain more than 87.9 % after 100 cycles at 0.5â C. This work illustrates that reforming traditional carbonate electrolytes provides a scalable, cost-effective approach towards practical LMBs.
RESUMO
We report the synthesis of alternating poly(lactic-co-glycolic acid) via a regioselective ring-opening polymerization of (S)-methyl glycolide. An enantiopure aluminum salen catalyst with binaphthyl backbone facilitates the regioselective ring-opening of this unsymmetrical cyclic diester exclusively at the glycolide acyl-oxygen bond site. This living, chain-growth polymerization is able to reach low dispersities with tailored molecular weights. Quantitative regioselectivity calculations and sequence error analysis have been established for this sequence-controlled polymer.
RESUMO
Understanding the degradation mechanisms of organic cations under basic conditions is extremely important for the development of durable alkaline energy conversion devices. Cations are key functional groups in alkaline anion exchange membranes (AAEMs), and AAEMs are critical components to conduct hydroxide anions in alkaline fuel cells. Previously, we have established a standard protocol to evaluate cation alkaline stability within KOH/CD3OH solution at 80 °C. Herein, we are using the protocol to compare 26 model compounds, including benzylammonium, tetraalkylammonium, spirocyclicammonium, imidazolium, benzimidazolium, triazolium, pyridinium, guanidinium, and phosphonium cations. The goal is not only to evaluate their degradation rate, but also to identify their degradation pathways and lead to the advancement of cations with improved alkaline stabilities.
RESUMO
Reactive metals are known to electrodeposit with irregular morphological features on planar substrates. A growing body of work suggest that multiple variables: composition, mechanics, structure, ion transport properties, reductive stability, and interfacial energy of interphases, formed either spontaneously or by design on the metal electrode play important but differentiated roles in regulating these morphologies. We examine the effect of fluorinated thermoset polymer coatings on Li deposition by means of experiment and theoretical linear stability analysis. By tuning the chemistry of the polymer backbone and side chains, we investigate how physical and mechanical properties of polymeric interphases influence Li electrodeposit morphology. It is found that an interplay between elasticity and diffusivity leads to an optimum interphase thickness and that higher interfacial energy augments elastic stresses at a metal electrode to prevent out-of-plane deposition. These findings are explained using linear stability analysis of electrodeposition and provide guidelines for designing polymer interphases to stabilize metal anodes in rechargeable batteries.
RESUMO
High-density polyethylene (HDPE) is utilized in a multitude of commercial products worldwide due to its broad spectrum of physical properties and low production costs. Molecular weight and dispersity (D) are known to affect the tensile and rheological properties of HDPE, but little is known about the influence of the molecular weight distribution (MWD) shape on these properties. In this work, we investigate this matter through the temporal regulation of initiation in a living coordination-insertion polymerization of ethylene. This method provides precise control over the MWD shape which, in turn, offers a systematic study on the influence of MWD shape on the physical properties of HDPE. Through rheological testing, we observe a difference in complex viscosity and shear thinning with opposite MWD skew. However, tensile testing reveals that the MWD skew does not impact the strain at break, signifying the ability to influence HDPE processing without compromising material strength.