Synovial sarcomas: A single surgeon experience of 130 cases.

BACKGROUND: Synovial sarcoma is a rare malignant tumor that generally requires a multidisciplinary therapeutic approach. In this study we report the experience of a single surgeon, evaluating surgical and oncological outcomes of the cases he treated through his 30 years carrier. METHODS: We enrolled patients treated surgically between 1988 and 2018. Surgical and medical treatments, as well as surgical and oncological results, were investigated. RESULTS: One hundred and thirty cases were included. Surgical resection was carried out achieving wide margins in 90% of the cases. At their latest follow-up, 76 patients were continuously disease free, 16 were no evidence of disease, and other 16 were alive with disease. Twenty cases were dead of disease and two dead of other causes. Twenty-five patients (19%) had local recurrence of synovial sarcoma through their postoperative intercourse. Thirty-seven patients (28%) were diagnosed with at least a metastasis during their follow-up. The global survival of our population, at each patient's latest follow-up, was 82%. Cases with tumor size above 5 cm had a significantly higher risk to develop metastasis (p = 0.002). CONCLUSIONS: Synovial sarcoma is a threatening disease and represents a challenge for oncological physicians and surgeons. Early diagnosis and multidisciplinary approach are mandatory to limit the spread of synovial sarcomas, maximizing the effectiveness of surgery and the other treatments.

One-Step Reconstruction with Custom-made 3D-printed Scapular Prosthesis After Partial or Total Scapulectomy.

En bloc scapulectomy with covering muscles was historically considered the only procedure available for surgical treatment of bone and soft tissue tumors of the scapula. When possible, reconstruction with scapular allograft is the gold standard, and gives satisfactory functional, cosmetic, and oncological outcomes. While good results have recently been reported with 3D-printed prostheses for reconstruction of bone loss, there is little information available in the medical literature regarding scapula reconstruction with a 3D-printed prosthesis. Between 2016 and 2018, we performed four scapular resections (two total and two involving the superior 1/3) followed by reconstruction with a 3D-printed prosthesis made of a porous titanium alloy (Ti-6Al-4V, diameter between 100 and 400 mm), using computer-aided design (CAD) and patient-specific implants (PSI) with previously acquired CT-MR fusion images. At 2 years follow-up, the patients with partial scapulectomy had an MSTS score of 76%, no local or systemic recurrence, good clinical results and no pain. At 1 year 6 months follow-up, the patients with total scapulectomy had an MSTS score of 46%, no local or systemic recurrence, fair clinical results and no pain. Thus, custom-made 3D-printed prostheses appear to be valuable in orthopedic surgery. However, a larger cohort and longer-term analysis are needed to evaluate the scapular 3D-printed prosthesis as a reliable reconstruction technique.

Complex Fibular Head Avulsion Fracture: Surgical Management of a Case.

Fibular head avulsion fractures are rare injuries determined by traction of the fibular attachment of the lateral collateral ligament (LCL). Surgical treatment is often recommended with different techniques such as tension band fixation or lag screws stabilization. In this article, we describe a fixation technique of fibular head fractures obtained through the use of anchors. A 45-year-old athletic patient came to our attention in our traumatologic service after a motorcycle accident. He reported a complex injury of the posterolateral corner with an avulsion fracture of the left fibular head. We performed a clinical evaluation at the final follow-up visit (six months). We demonstrated that the use of suture anchors may be an effective technique of fixation in avulsion fracture of the fibular head associated with combined posterolateral corner injuries.

Clinical and functional results after total scapulectomy in orthopedic oncology: are custom-made scapular prostheses better than humeral suspension?

Background: In orthopedic oncology, total scapulectomy is necessary to allow a wide resection of extended malignancies of the scapula and scapular girdle. Scapular reconstruction is challenging even for the most experienced surgeon. This paper reports our experience with total scapular resections, followed by humeral suspension or custom-made prostheses. Methods: In this retrospective study, we evaluated all the oncologic patients treated in our institution between 2016 and 2023 with total scapulectomy and consequential reconstruction using humeral suspension or a custom-made prosthesis. Only cases suffering from malignant bone tumors were included. The postoperative functionality of the treated limbs was assessed using the Musculoskeletal Tumor Society (MSTS) scoring scale. Complications and local recurrences were also recorded. Results: Nine patients were enrolled. Five had custom-made implants, and four had humeral suspensions. The mean postoperative MSTS score of patients treated with custom-made prostheses was 24.0 (22-26). Globally, our cohort's mean MSTS score was 19.1 (9-26). Patients with custom-made prostheses had significantly better functional outcomes (MSTS 24 vs 13) and similar complication rates (40% vs 50%) than those who received humeral suspensions. Conclusion: Our outcomes suggest that, when feasible, custom-made scapular prostheses can represent a reliable reconstructive option after total scapulectomy for malignant scapular tumors.

Giant atypical lipomatous tumors of the thigh: a case series.

BACKGROUND AND AIM: Atypical Lipomatous Tumors (ALTs) are low-grade locally aggressive soft tissue tumors. Deep large sized ALTs of the thigh can cause significant functional impairment due to their mass effect. Surgical resection, which is the treatment of choice for these lesions, can be a though procedure, especially if the neoplasm comes in proximity with noble structures such as large sized arteries or nerves. The aim of our study is to assess risks and effectiveness of surgical resection, evaluating complications, local recurrences and post-operative functionality. METHODS: We evaluated all the giant ALT (larger diameter of 10 cm or more) of the thigh that received surgery in our institution between 2017 and 2022. Each patient's personal data and tumor size were evaluated. The quality of surgical margins was analyzed. MRI scans were performed both pre-operatively and during patients' follow-up. Lower limb's functional status was assessed using the MSTS score before and after surgery. Intra-operative and post-operative complications were recorded, as well as local recurrences. RESULTS: Twentythree cases were included in our study. Tumors' mean major diameter was 19.1cm. The mean pre-operative MSTS score was 25.9. Only one case suffered from significant post-operative complications. Only 2 of our cases (8.7%) developed a local recurrence after surgery. The mean post-operative MSTS score was 29.1 Conclusions: A careful surgical resection can be effective in treating giant ALTs of the thigh in reason of good functional outcomes, low complications risks and reasonable local recurrence rates.

Preliminary Results of Preoperative Planning Using 3D Printing and Augmented Reality in Cryotherapy Treatment of Giant Cell Tumor of Bone-CRIO2AR Project.

Giant Cell Tumor of Bone is a benign tumor with high local aggressive expansion, which, in rare cases, spreads metastasis. Surgical treatment, which often consists of wide curettage to reduce recurrence risk, can lower the quality of life for those affected. Along with aggressive surgery, adjuvant intraoperative techniques have been implemented such as PMMA and cryotherapy. One of the most widely used cryotherapy techniques involves the use of probes to generate ice balls, which have been scientifically shown to have various impacts on the tumor. Although this has been acknowledged, no one has yet tested a way to accurately plan the positioning of cryotherapy probes before surgery, according to the research conducted by the authors. CRIO2AR is a randomized clinical prospective ongoing study by which it will be experimented via preoperative planning of ice probes placement using AR and 3D printing technologies. By studying a single clinical case with these technologies, the surgeon gains better awareness of patient's anatomy and tumor localization. Preliminary results are shown in the article. The first results are confirming that these technologies are applicable in clinical practice. Secondly, preoperative planning is proving to be reliable, easily replicable, and useful for the surgeon.

Clinical implications of anticoagulant oral therapy in elderly patients with hip fracture.

BACKGROUND AND AIM: Proximal femur fractures (PFFs) are among the most common fractures, especially in the elderly population. A PFF often represents a life-changing event. Their dramatic effects are attributable not only to the massive hemorrhages caused by the fracture, but also to the high risk of dramatic complications. These risks are supposed to be even higher for patients under oral anticoagulant treatment. In this study we evaluated how oral anticoagulant therapy effected patient's prognosis.   Methods:Ours was a case-control review of over-65 patients treated surgically for proximal femur fractures between 2013 and 2019. Cases were divided in 2 groups depending if they were (Group A) or were not (Group B) under oral anticoagulant therapy at the moment of hospitalization.   Results:200 cases were included in our study: 100 in Group A and 100 in Group B. Surgical delay was significantly higher for cases under oral anticoagulant treatment compared to the other cases. Group A cases were transfused with a significantly higher frequency and with more blood units compared to Group B (p=0.0300; p=0.013). Combined cardiological and vascular complications occurred in 21 cases (10.5%), being significantly more common in Group A (16) than Group B (5), as testified by a chi-square test (P=0.011).   Conclusions:Cases under oral anticoagulant therapy are frail patients with a higher risk to develop massive hemorrhages after an hip fracture. For this reason, it is mandatory to achieve an early stabilization of patient's clinical conditions and then perform surgery as soon as possible.

Percutaneous Foot Surgery without Osteosynthesis in Hallux Valgus and Outcomes.

BACKGROUND: Several procedures and types of osteotomies have been described for hallux valgus (HV) correction. Percutaneous techniques may lead to an early regain of function reducing morbidity and recovery time. In this study, we aimed to evaluate the clinical and radiographic outcomes of percutaneous hallux valgus (HV) correction. METHODS: One hundred and twenty-four feet treated with the percutaneous technique between May 2011 and December 2015 were included in our study. All patients underwent resection of the medial metatarsal exostosis, complete first metatarsal distal osteotomy, adductor hallucis tendon release and Akin osteotomy of the proximal phalanx. Pre- and postoperative X-rays were clinically assessed. RESULTS: The mean hallux valgus angle (HVA) and the intermetatarsal angle (IMA) decreased significantly from the preoperative assessment to the final follow-up. The AOFAS score improved from a mean preoperative value of 70.2 to 93.8 at the final follow-up. CONCLUSION: Percutaneous complete distal osteotomy in hallux valgus correction is a safe, reliable and effective procedure for the correction of symptomatic mild hallux valgus. Nevertheless, it requires appropriate surgical experience and patient aftercare in order to achieve the best result.

First metatarsophalangeal fusion with dorsal plate: clinical outcomes.

BACKGROUND: First metatarsophalangeal joint (MTPJ) fusion is the most effective technique for the treatment of MTPJ primary arthritis, severe hallux valgus and failure of primary corrective surgery of these conditions. It can be achieved through different techniques. We evaluated the outcomes in a cohort of patients treated with dorsal plate arthrodesis. MATERIALS AND METHODS: We treated 30 feet for 28 patients; the mean follow-up was 35 months. For each foot, we collected radiological and clinical assessment, with the visual analogue scale (VAS) for pain and the Manchester and Oxford Foot questionnaire (MOFQ). The technique consisted in a cup and cone arthrodesis with the application of a low profile dorsal plate. Patients were allowed for immediate weight bearing. RESULTS: Consolidation was achieved in all cases; in 29 cases, radiographic union was recorded within 6 months from surgery, in one case after 9 months. Comparison between the preoperative and postoperative of VAS and MOXFQ values showed a statistically significant difference (p < 0.05). Only one case developed wound dehiscence as complication. CONCLUSIONS: Even if there is still a debate regarding the best system for MTPJ fusion, we believe cup and cone fusion with dorsal plating is an effective method. Moreover, the stability of the osteosynthesis obtained allows for immediate post-operative weight bearing, making patients able to return soon to their normal life. TRIAL REGISTRATION: We present a retrospective study; all patients enrolled were retrospectively registered.

Arthroscopic labral repair with all-suture anchors: a magnetic resonance imaging retrospective study with a 2.5-year follow-up.

Aim To evaluate radiological and clinical outcomes of a case series of patients affected by glenohumeral instability (Bankart lesion) or superior labrum tear from anterior to posterior (SLAP) lesions treated by arthroscopic repair using all-suture anchors. Methods Patients were operated by a single surgeon at a single Institution. Exclusion criteria were chondral lesions of the glenoid, rotator cuff lesions, previous surgery at the index shoulder, or a bony Bankart lesion. Position and numbers of anchors used depended on the dimension and type of lesion. The DASH (Disability of the Arm, Shoulder and Hand) and Constant scores were used for subjective and clinical evaluation at follow-ups (FUs); also, at 1-year FU, MRI scan was obtained to evaluate bone reaction to the implanted devices. Results Fifty-four patients were included. A mean of 2.7 devices per patient (145 in total) were implanted. Mean FU was 30 (range 12 - 48) months. No patient reported recurrent instability, nor hardware-related complications were registered. MRI analyses showed that 119 (82%) implants did not alter surrounding bone (grade 0), 26 (18%) implants were surrounded by bone oedema (grade 1), while no bone tunnel enlargement nor a bone cyst (grade 2 or 3, respectively) were registered. Conclusion This study confirmed the efficacy and safety of a specific all-suture anchor system in the arthroscopic repair of the glenoid labrum for glenohumeral instability or a SLAP lesion. In the short- and mid-term period, these devices were associated with good clinical and radiological outcomes without clinical failures or reaction at bone-device interface.

Instability Severity Index Score Does Not Predict the Risk of Shoulder Dislocation after a First Episode Treated Conservatively.

The first purpose of this study was to verify the association between Instability Severity Index Score (ISIS) and Recurrent Shoulder Dislocation (RSD) after a first episode treated conservatively. The second aim is to identify the risk factors associated with RSD after a primary acute shoulder anterior dislocation treated conservatively. A total of 111 patients with first traumatic anterior shoulder dislocation treated at a single trauma centre between January 2014 and March 2016 were enrolled. The main predictive variables of risk factors and the ISIS score were calculated. Among the 85 patients included, 26 cases of RSD were observed (30.6%). Considering the whole population, no significant association between ISIS and RSD were reported. Regarding other risk factors, high-risk working activities and rotator cuff injury had a significantly higher RSD risk. Sex, dominant limb, familiar history, hyperlaxity, contact or overhead sports, competitive sport, post-reduction physiokinesitherapy, return to sports activity time, Hill-Sachs lesion, bony Bankart lesion and great tuberosity fracture did not seem to influence the risk of RSD. No correlation between ISIS score and RSD in patients treated conservatively after a first episode of shoulder dislocation were reported. The only risk factors with a significant association to RSD were high-risk working activities and rotator cuff injury.

Bone Marrow Concentrate in the Treatment of Aneurysmal Bone Cysts: A Case Series Study.

INTRODUCTION: A recent attractive option regarding mesenchymal stem cells (MSC) application is the treatment of bone cystic lesions and in particular aneurysmal bone cysts (ABC), in order to stimulate intrinsic healing. We performed a retrospective evaluation of the results obtained at our institution. METHODS: The study group consisted of 46 cases with an average follow-up of 33 months. Forty-two patients underwent percutaneous treatment as the first approach; four patients had curettage as first treatment. In all cases, autologous bone marrow concentrate (BMC) was associated too. The healing status was followed up through a plain radiograph 45 days and 2 months after the procedure. Results and Conclusions. At the final follow-up, thirty-six patients healed with a Neer type II aspect, nine healed with a type I aspect, and one patient was not classified having total hip arthroplasty. Bone marrow concentrate is easy to obtain and to manipulate and can be immediately available in a clinical setting. We can assert that the use of BMC must be encouraged being harmless and having an unquestionable high osteogenic and healing potential in bone defects.