Flexible Hydrazone-Linked Metal-Covalent Organic Frameworks with Copper Clusters for Efficient Electrocatalytic Oxygen Evolution Reaction.

Despite the challenges associated with the synthesis of flexible metal-covalent organic frameworks (MCOFs), these offer the unique advantage of maximizing the atomic utilization efficiency. However, the construction of flexible MCOFs with flexible building units or linkages has rarely been reported. In this study, novel flexible MCOFs are constructed using flexible building blocks and copper clusters with hydrazone linkages. The heterometallic frameworks (Cu, Co) are prepared through the hydrazone linkage coordination method and evaluated as catalysts for the oxygen evolution reaction (OER). Owing to the spatial separation and functional cooperation of the heterometallic MCOF catalysts, the as-synthesized MCOFs exhibited outstanding catalytic activities with an overpotential of 268.8 mV at 10 mA cm-2 for the OER in 1 M KOH, which is superior to those of the reported covalent organic frameworks (COFs)-based OER catalysts. Theoretical calculations further elucidated the synergistic effect of heterometallic active sites within the linkages and frameworks, contributing to the enhanced OER activity. This study thus introduces a novel approach to the fundamental design of flexible MCOF catalysts for the OER, emphasizing their enhanced atomic utilization efficiency.

Research Progress on Active Ingredients and Product Development of Lycium ruthenicum Murray.

Lycium ruthenicum Murray possesses significant applications in both food and medicine, including antioxidative, anti-tumor, anti-fatigue, anti-inflammatory, and various other effects. Consequently, there has been a surge in research endeavors dedicated to exploring its potential benefits, necessitating the organization and synthesis of these findings. This article systematically reviews the extraction and content determination methods of active substances such as polysaccharides, anthocyanins, flavonoids, and polyphenols in LRM in the past five years, as well as some active ingredient composition determination methods, biological activities, and product development. This review is divided into three main parts: extraction and determination methods, their bioactivity, and product development. Building upon prior research, we also delve into the economic and medicinal value of Lycium ruthenicum Murray, thereby contributing significantly to its further exploration and development. It is anticipated that this comprehensive review will serve as a valuable resource for advancing research on Lycium ruthenicum Murray.

Elaborate Modulating Binding Strength of Intermediates via Three-component Covalent Organic Frameworks for CO2 Reduction Reaction.

The catalytic performance for electrocatalytic CO2 reduction reaction (CO2RR) depends on the binding strength of the reactants and intermediates. Covalent organic frameworks (COFs) have been adopted to catalyze CO2RR, and their binding abilities are tuned via constructing donor-acceptor (DA) systems. However, most DA COFs have single donor and acceptor units, which caused wide-range but lacking accuracy in modulating the binding strength of intermediates. More elaborate regulation of the interactions with intermediates are necessary and challenge to construct high-efficiency catalysts. Herein, the three-component COF with D-A-A units was first constructed by introducing electron-rich diarylamine unit, electron-deficient benzothiazole and Co-porphyrin units. Compared with two-component COFs, the designed COF exhibit elevated electronic conductivity, enhanced reducibility, high efficiency charge transfer, further improving the electrocatalytic CO2RR performance with the faradic efficiency of 97.2 % at -0.8 V and high activity with the partial current density of 27.85 mA cm-2 at -1.0 V which exceed other two-component COFs. Theoretical calculations demonstrate that catalytic sites in three-component COF have suitable binding ability of the intermediates, which are benefit for formation of *COOH and desorption of *CO. This work offers valuable insights for the advancement of multi-component COFs, enabling modulated charge transfer to improve the CO2RR activity.

Precisely Engineering Asymmetric Atomic CoN4 by Electron Donating and Extracting for Oxygen Reduction Reaction.

The development of nonpyrolytic catalysts featuring precisely defined active sites represents an effective strategy for investigating the fundamental relationship between the catalytic activity of oxygen reduction reaction (ORR) catalysts and their local coordination environments. In this study, we have synthesized a series of model electrocatalysts with well-defined CoN4 centers and nonplanar symmetric coordination structures. These catalysts were prepared by a sequential process involving the chelation of cobalt salts and 1,10-phenanthroline-based ligands with various substituent groups (phen(X), where X=OH, CH3, H, Br, Cl) onto covalent triazine frameworks (CTFs). By modulating the electron-donating or electron-withdrawing properties of the substituent groups on the phen-based ligands, the electron density surrounding the CoN4 centers was effectively controlled. Our results demonstrated a direct correlation between the catalytic activity of the CoN4 centers and the electron-donating ability of the substituent group on the phenanthroline ligands. Notably, the catalyst denoted as BCTF-Co-phen(OH), featuring the electron-donating OH group, exhibited the highest ORR catalytic activity. This custom-crafted catalyst achieved a remarkable half-wave potential of up to 0.80 V vs. RHE and an impressive turnover frequency (TOF) value of 47.4×10-3 Hz at 0.80 V vs. RHE in an alkaline environment.

Theoretical study on hydrogen transfer in the dissociation of dimethyl disulfide radical cations.

Hydrogen transfer (HT) is of crucial importance in biochemistry and atmospheric chemistry. Here, HT processes involved in the dissociation reaction of dimethyl disulfide radical cations (DMDS˙+, CH3SSCH3˙+) are investigated using quantum chemical calculations. Four HTs from the C to S atom and one HT from the S to S atom are observed and the most probable paths are proposed in the dissociation channel from DMDS˙+ to CHnS+ (n = 2-4). The mechanisms of all these five HTs are described as hydrogen atom transfer (HAT) and four of them are accompanied by electron transfer (ET). Considering the catalytic effect of water molecules existing in organisms and the atmosphere, five HT processes in the dissociation of the [DMDS + H2O]˙+ complex are further explored, which show lower free energy barriers. With the participation of water molecules acting as a base, two HTs from the C to the S atom, which have the largest decrease in energy barriers, are characterized as concerted proton-coupled electron transfer (cPCET). These results can be extended to understand the mechanism of the HT process during the dissociation of disulfide and help provide a strategy to design a rare cPCET mechanism for the activation of the C-H bond.

Study on Fluorescence Recognition of Fe3+, Cr2O72- and p-Nitrophenol by a Cadmium Complex and Related Mechanism.

The effective detection of environmental pollutants is very important to the sustainable development of human health and the environment. A luminescent Cd(II) coordination complex, {[Cd(dbtdb)(1,2,4-H3btc)]·0.5H2O}n (1) (dbtdb = 1-(2,3,5,6-tetramethyl-4-((2-(thiazol-4-yl)-2H-benzo[d]imidazol-3(3aH)-yl)methyl)benzyl)-2,7a-dihydro-2-(thiazol-4-yl)-1H-benzo[d]imidazole, 1,2,4-H3btc = 1,2,4-benzenetricarboxylic acid), was obtained by hydrothermal reactions. Complex 1 has a chain structure decorated with uncoordinated Lewis basic O and S donors and provides good sensing of Fe3+, Cr2O72-, and p-nitrophenol with fluorescence quenching through an energy transfer process. The calculated binding constants were 3.3 × 103 mol-1 for Fe3+, 2.36 × 104 mol-1 for Cr2O72-, and 9.3 × 103 mol-1 for p-nitrophenol, respectively. These results show that 1 is a rare multiresponsive sensory material for efficient detection of Fe3+, Cr2O72-, and p-nitrophenol.

One-Dimensional Covalent Organic Frameworks for the 2e- Oxygen Reduction Reaction.

Two-dimensional covalent organic frameworks (2D COFs) are often employed for electrocatalytic systems because of their structural diversity. However, the efficiency of atom utilization is still in need of improvement, because the catalytic centers are located in the basal layers and it is difficult for the electrolytes to access them. Herein, we demonstrate the use of 1D COFs for the 2e- oxygen reduction reaction (ORR). The use of different four-connectivity blocks resulted in the prepared 1D COFs displaying good crystallinity, high surface areas, and excellent chemical stability. The more exposed catalytic sites resulted in the 1D COFs showing large electrochemically active surface areas, 4.8-fold of that of a control 2D COF, and thus enabled catalysis of the ORR with a higher H2 O2 selectivity of 85.8 % and activity, with a TOF value of 0.051 s-1 at 0.2 V, than a 2D COF (72.9 % and 0.032 s-1 ). This work paves the way for the development of COFs with low dimensions for electrocatalysis.

CoN5 Sites Constructed by Anchoring Co Porphyrins on Vinylene-Linked Covalent Organic Frameworks for Electroreduction of Carbon Dioxide.

Developing effective electrocatalysts for CO2 reduction (CO2 RR) is of critical importance for producing carbon-neutral fuels. Covalent organic frameworks (COFs) are an ideal platform for constructing catalysts toward CO2 RR, because of their controllable skeletons and ordered pores. However, most of these COFs are synthesized from Co-porphyrins or phthalocyanines-based monomers, and the available building units and resulting catalytic centers in COFs are still limited. Herein, Co-N5 sites are first developed through anchoring Co porphyrins on an olefin-linked COF, where the Co active sites are uniformly distributed in the hexagonal networks. The strong electronic coupling between Co porphyrins and COF is disclosed by various characterizations such as X-ray absorption spectroscopy (XAS) and density functional theory calculation (DFT). Thanks to the CoN5 sites, the catalytic COF shows remarkable catalytic activity with Faraday efficiencies (FECO ) of 84.2-94.3% at applied potentials between -0.50 and -0.80 V (vs RHE), and achieves a turnover frequency of 4578 h-1 at -1.0 V. Moreover, the theoretical calculation further reveals that the CoN5 sites enable a decrease in the overpotential for the formation COOH*. This work provides a design strategy to employ COFs as scaffold for fabricating efficient CO2 electrocatalysts.

Construction of Catalytic Covalent Organic Frameworks with Redox-Active Sites for the Oxygen Reduction and the Oxygen Evolution Reaction.

Construction of catalytic covalent organic frameworks (COFs) for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is significant but rarely demonstrated. In this work, we have first constructed bifunctional COFs towards ORR and OER by integrating diarylamine derivatives into the Co-porphyrin based frameworks. Both of the new COFs (CoTAPP-PATA-COF and CoTAPP-BDTA-COF) have good ordered structures, high surface areas, and robust chemical stability. The diarylamine units, as a typical electron donor and redox-active cores, promote intramolecular electron transport along the frameworks and improve the electrochemically active surface areas. Thus, the COFs showed higher catalytic activities than that of the COF without redox-active units. CoTAPP-PATA-COF had a halfwave potential of 0.80 V towards ORR, and delieved an overpotential of 420 mV for OER in 0.1 M KOH. The theoretical calculation revealed introducing diarylamine unites improved the oxygen electrocatalysis.

Covalent Organic Frameworks with Tailored Functionalities for Modulating Surface Potentials in Triboelectric Nanogenerators.

Designing materials with high triboelectric is an efficient way of improving output performance of triboelectric nanogenerators (TENGs). Herein, we synthesized a series of covalent organic frameworks (COFs) with similar skeletons but various functional groups ranging between electron-donating and electron-withdrawing. These COFs form an ideal platform for clarifying the contribution of each group to TENG performance because the pore wall is perturbed in a predesigned manner. Kelvin probe force microscopy and computational data suggest that surface potentials and electron affinities of COFs can be improved by introducing electron-donating or withdrawing groups, with the highest values observed for fluorinated COF. The TENG with fluorinated COF delivered an output voltage and current of 420 V and 64 µA, respectively, which are comparable to other reported materials. This strategy can be used to efficiently screen suitable frameworks as TENG materials with excellent output performance.

Benchmark study of popular density functionals for calculating binding energies of three-center two-electron bonds.

Density functional theory (DFT) can be used to study the three-center two-electron (3c2e) bonding mode, which is universal in catalysts containing alkaline-earth (Ae) and boron-group (Bg) elements. However, because of the delocalization pattern of the 3c2e bond, the wavefunction cannot be accurately described by DFT methods. The calculated energies of Ae and Bg catalysts therefore fluctuate greatly when different functionals are used, largely because of inconsistent DFT-calculated binding energies of 3c2e bonds. Nevertheless, with the development of supercomputers and theoretical calculation software, the DFT method is becoming increasingly popular for studying Ae and Bg catalysts. In this study, we compared the performances of 21 functionals with the high-level composite G3B3 method in calculations for the binding energies of 3c2e bonds. Several frequently used post-Hartree-Fock methods were also tested. The calculation results indicate that the M06-2X, MN12-L, and MN15 functionals give consistent and reliable binding energies for common 3c2e bonds. © 2018 Wiley Periodicals, Inc.

Theoretical studies on photo-induced cycloaddition and (6-4) reactions of the thymidine:4-thiothymidine dimer in a DNA duplex.

Thio-substituted nucleobases have received long-standing interest from experimental and theoretical scientists due to their potential applications in photodynamic therapy and crosslinking studies. Though the thymidine:4-thiothymidine dimer is an important structure in the DNA duplex, the molecular-level photoreaction mechanisms are still obscure. Herein, high-level QM/MM methods were adopted to investigate the photoinduced cycloaddition and (6-4) reactions of the thymidine:4-thiothymidine dimer in the DNA duplex, namely, d(ACCT(4ST)CGC:TGGAAGCG). Based on the calculated results, we identified five efficient nonadiabatic decay pathways to populate the T1 state from the initially occupied S2 state of Tp4ST via two crucial intersection structures, i.e., S2/S1 and S2/T2/S1/T1. Such photophysical processes are mainly localized on the 4-thiothymidine chromophore. After hopping to the T1 state, the light-induced [2+2] cycloaddition reaction could take place via a stepwise and nonadiabatic reaction pathway, which starts from Tp4ST via T1cc or T1cs intermediates in the T1 state and ends up with S5-thietane in the S0 state. By contrast, the concerted and thermal cycloaddition pathway in the ground state has a remarkable energy barrier, which is mechanistically less important. The subsequent generation of S5-(6-4) from S5-thietane is a concerted process in the S0 state with the simultaneous fission of the C4-S8 bond and the formation of the S8-H9 bond. In the end, we believe our present work will provide important mechanistic insights into photo-isomerization of thio-substituted nucleobases in DNA duplexes.

Photoinduced Curtius rearrangements of fluorocarbonyl azide, FC(O)N3: a QM/MM nonadiabatic dynamics simulation.

Upon either photolysis or pyrolysis, carbonyl azide can eliminate molecular nitrogen along with the formation of isocyanate. Though two different pathways (namely stepwise versus concerted) have been proposed, the detailed decomposition mechanism is still elusive to date. Herein, we have employed combined electronic structure calculations and nonadiabatic dynamics simulations to study the radiationless deactivation and rearrangement mechanisms of FC(O)N3 in the S3, S2, S1, and S0 states in an argon matrix. On the basis of QM(CASPT2)/MM calculations, we found that, upon 193 nm irradiation, the excited-state decay of FC(O)N3 from the S3 state via S2 and S1 to the S0 state is an ultrafast process and could be completed within 100 fs, and a subsequent Curtius rearrangement occurs in the period of ∼300 fs; the elimination of N2 and the formation of fluorocarbonyl nitrene FC(O)N could take place in both S1 and S0 states rather than in higher excited states; the isomerization from FC(O)N to FNCO involves a stepwise mechanism and could only be found in the S0 state. This mechanistic scenario has been verified by both electronic structure calculations and full-dimensional trajectory-based "on the fly" QM(CASPT2)/MM nonadiabatic dynamics simulations. Finally, the currently calculated results provide important mechanistic insights for similar carbonyl azides.

Reactivity and regioselectivity in Diels-Alder reactions of anion encapsulated fullerenes.

Encapsulation and surface chemical modification are methodologies to enhance the properties of fullerenes for various applications. Herein, density functional theory calculations are performed to study the Diels-Alder (DA) reactivity of anion encapsulated C60, including [X@C60]- (X = F, Cl, Br, or I), [S@C60]2-, and [N@C60]3-. Computational results reveal that encapsulated Cl-, Br-, I-, or S2- anions are located close to the center of the C60 molecule; however, encapsulated F- is displaced from the center. Encapsulated N3- bonds to the inner surface of the carbon cage, which leads to a negative charge transfer to the C60. In [N@C60]3-, C-C bonds near to the encapsulated N atom are more reactive. Our calculations reveal that encapsulated halogen or S anions decrease the DA reactivity because of the stronger closed-shell repulsion of the encapsulated anion. However, encapsulated N3- increases the DA reactivity. The higher distortion energy of the halogen- or S2--anion encapsulated C60 leads to lower reactivity of the 6-5 bond. Opposite regioselectivity of the DA reaction with [N@C60]3- is attributed to distortion energy of the cyclopentadiene (CPD) moiety. The asymmetrical transition state geometry leads to a lower distortion energy of the CPD moiety.

Theoretical Study on the Reactivity and Regioselectivity of the Diels-Alder Reaction of Fullerene: Effects of Charges and Encapsulated Lanthanum on the Bis-Functionalization of C70.

Bis-adducts of fullerenes are important for both material and biological science. The first added substituent greatly impacts the reactivity and regioselectivity of fullerene. What determines the bond reactivity and how to control the regioselectivity are two crucial questions in synthesizing bis-adduct of C70. Recently, an unexpected 12 o'clock isomer of anthracene bis-adduct of C70 was prepared with high yield by the Diels-Alder (DA) reaction although three possible isomers (12, 2, and 5 o'clock isomers) may be formed. In the current study, the beneath mechanism is systematically investigated by density functional theory methods. Moreover, effects of charges and encapsulated lanthanum atom on the regioselectivity are reported. The computational results successfully rationalize experimental observations by Venkata et al. A possible way to change the regioselectivity of DA reaction is put forward. The kinetical promotion effect of an encapsulated La atom on the 12 o'clock reaction is elucidated.

Role of encapsulated metal cation in the reactivity and regioselectivity of the C60 Diels-Alder reaction.

Endohedral metallofullerene has novel properties because of the interaction between the encapsulated metal atom or cation and fullerene. Experiments have demonstrated that the insertion of Li(+) into C60 can greatly promote the reactivity of the Diels-Alder (DA) cycloaddition of cyclopentadiene (CpH) to C60. However, the reaction is sufficiently fast that its quantitative kinetic data cannot be obtained experimentally. In addition, knowledge regarding the effects of other alkali metal cations and metal cations with more charges on the reactivity and regioselectivity of C60 is almost nonexistent. In the current study, DA cycloadditions of CpH to M(+)@C60 (where M = Li, Na, K, Rb, and Cs) and Ca(2+)@C60 were investigated via density functional theory in the gas phase and in solvent. Via careful discussion and comparison with the results of C60, we concluded the following for the DA reaction of CpH to C60 and, more generally, for DA reactions of other fullerenes: (1) the encapsulated metal cations enhance the reactivity; (2) among alkali metal cations, Na(+) could be the best catalyst; (3) Ca(2+) is more favorable in promoting the reactivity than any alkali metal cation; (4) encapsulated metal cations with more positive charges enhance the reactivity of the 6-5 bond in C60, which is significant when the 6-5 adduct is the target product.

Theoretical Study on the Mechanism of Cobalt-Catalyzed C-O Silylation and Stannylation.

Organosilicon and organotin compounds have been widely used in many fields, such as organic synthesis, materials science, and biochemistry, because of their unique physical and electronic properties. Recently, two novel compounds containing C-Si or C-Sn bonds have been synthesized. These compounds can be used for late modification of drug-like molecules such as probenecid, duloxetine, and fluoxetine derivatives. However, the detailed reaction mechanisms and the influencing factors that determine selectivity are still unclear. Moreover, several questions remain that are valuable to investigate further, such as (1) the influence of the solvent and the lithium salt on the reaction of the Si/Sn-Zn reagent, (2) the stereoselective functionalization of C-O bonds, and (3) the differences between silylation and stannylation. In the current study, we have explored the above issues with density functional theory and have found that stereoselectivity was most likely caused by the oxidative addition of cobalt to the C-O bond of alkenyl acetate with chelation assistance and that transmetalation was most likely the rate-determining step. For Sn-Zn reagents, the transmetalation was achieved by anion and cation pairs, whereas for Si-Zn reagents, the process was facilitated by Co-Zn complexes.

Rational Design of Vinylene-Linked Covalent Organic Frameworks for Modulating Photocatalytic H2 Evolution.

Vinylene-linked covalent organic frameworks (COFs) have attracted enormous attention for photocatalytic H2 evolution from water because of their fully conjugated structures, high chemical stabilities, and enhanced charge-carrier mobilities. In this work, two novel vinylene-linked COFs with tuned cyano contents were successfully synthesized and then employed as photocatalysts for H2 generation. Notably, the photocatalytic H2 production rate of the COF with the higher cyano content reached 73 µmol h-1 under visible light irradiation, which is 2.4 times higher than that with the lower content (30 µmol h-1 ). Both the experimental and computational results demonstrated that the rational design incorporating cyano groups into COF skeletons could precisely tune the corresponding energy levels, expand the visible-light absorption, and improve the photoinduced charge separation. This work not only provides a simple method for modulating the photocatalytic activities of COFs at the molecular level, but also affords interesting insights into the relationship between their structures and photocatalytic performance.

Post-synthetic modification of covalent organic frameworks for CO2 electroreduction.

To achieve high-efficiency catalysts for CO2 reduction reaction, various catalytic metal centres and linker molecules have been assembled into covalent organic frameworks. The amine-linkages enhance the binding ability of CO2 molecules, and the ionic frameworks enable to improve the electronic conductivity and the charge transfer along the frameworks. However, directly synthesis of covalent organic frameworks with amine-linkages and ionic frameworks is hardly achieved due to the electrostatic repulsion and predicament for the strength of the linkage. Herein, we demonstrate covalent organic frameworks for CO2 reduction reaction by modulating the linkers and linkages of the template covalent organic framework to build the correlation between the catalytic performance and the structures of covalent organic frameworks. Through the double modifications, the CO2 binding ability and the electronic states are well tuned, resulting in controllable activity and selectivity for CO2 reduction reaction. Notably, the dual-functional covalent organic framework achieves high selectivity with a maximum CO Faradaic efficiency of 97.32% and the turnover frequencies value of 9922.68 h-1, which are higher than those of the base covalent organic framework and the single-modified covalent organic frameworks. Moreover, the theoretical calculations further reveal that the higher activity is attributed to the easier formation of immediate *CO from COOH*. This study provides insights into developing covalent organic frameworks for CO2 reduction reaction.

Cd(II)/Mn(II)/Co(II)/Ni(II)/Zn(II) Coordination Polymers Built from Dicarboxylic Acid/Tetracarboxylic Acid Ligands: Their Structural Diversity and Fluorescence Properties.

Six Cd(II)/Mn(II)/Co(II)/Ni(II)/Zn(II) coordination complexes are formulated as [Cd2(X2-)2(µ3-O)2/3]n (1), [Mn2(X2-)2(µ3-O)2/3]n (2), {[Co1.5(Y4-)0.5(4,4'-bpy)1.5(OH-)]·2H2O}n (3), {[Ni(X2-)(4,4'-bpy)(H2O)2]·4H2O}n (4), [Zn(m-bdc2-)(bebiyh)]n (5), and [Cd(5-tbia2-)(bebiyh)]n (6) (H2X = 3,3'-(2,3,5,6-tetramethyl-1,4-phenylene) dipropionic acid. H4Y = 2,2'-(2,3,5,6-tetramethyl-1,4-phenylene)bis(methylene) dimalonic acid, bebiyh = 1,6-bis(2-ethyl-1H-benzo[d]imidazol-1-yl)hexane, m-H2bdc = 1,3-benzenedicarboxylic acid, and 5-H2tbia = 5-(tert-butyl)isophthalic acid) were obtained by hydrothermal reactions and structurally characterized. Complexes 1 and 2 have a 6-connected 3D architecture and with several point symbols of (36·46·53). Complex 3 features a 5-connected 3D net structure with a point symbol of (5·69). Complex 4 possesses a 4-connected 2D net with a vertex symbol of (44·62). Complex 5 is a 3-connected 2D network with a point symbol of (63). Complex 6 is a (3,3)-connected 2D network with a point symbol of (63)2. In addition, complexes 1 and 4 present good photoluminescence behaviors. The electronic structures of 1 and 4 were investigated with the density functional theory (DFT) method to understand the photoluminescence behaviors.