Electrochemical and computational insights into the utilization of 2, 2- dithio bisbenzothiazole as a sustainable corrosion inhibitor for mild steel in low pH medium.

Industries today place a high premium on environmentally friendly supplies that may effectively inhibit metal dissolution at a reasonable cost. Hence, in this paper, we assessed the corrosion inhibition effectiveness of the Thiazole derivative namely, 2, 2-Dithio Bisbenzothiazole (DBBT) against mild steel (MS) corrosion in 1 M HCl. Several experimental approaches, including gravimetric analysis, potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), and surface exploration using scanning electron/atomic force microscopy (SEM/AFM) and contact angle (CA), were utilized to conduct the measurements. In 1 M HCl corrosive medium at 298 K in the subsistence of 800 ppm of DBBT, this experiment indicated DBBT as an environment-friendly and sustainable corrosion inhibitor (CI) for MS, demonstrating an inhibition efficiency (IE %) of 97.71%. To deliver a deeper knowledge of the mechanism behind inhibitive behavior, the calculated thermodynamic and activation characteristics were applied. The calculated Gibbs free energy values indicated that the CI interacted physically and chemically with the MS surface, validating physio-chemical adsorption. The findings of the EIS research revealed that an upsurge in the doses of the CI is escorted by an upsurge in polarization resistance (Rp) from (88.05 → 504.04) Ωcm2, and a diminution in double layer capacitance (Cdl) from (97.46 → 46.33) µFcm-2 at (50 → 800) ppm respectively, affirming the inhibitive potential of DBBT. Additionally, the greatest displacement in Ecorr value being 76.13 mV < 85 mV, indicating that DBBT act as a mixed-form CI. To study the further impacts of DBBT on the inhibition capabilities of the compound under investigation, density functional theory (DFT) and molecular dynamics (MD) simulation were employed. Chemical and electrochemical approaches are in agreement with the computational analysis indicating DBBT is the most efficient CI.

Effective corrosion inhibition of mild steel using novel 1,3,4-oxadiazole-pyridine hybrids: Synthesis, electrochemical, morphological, and computational insights.

An easy synthesis of two 1,3,4-oxadiazole derivatives, namely, 2-phenyl-5-(pyridin-3-yl)-1,3,4-oxadiazole (POX) and 2-(4-methoxyphenyl)-5-(pyridin-3-yl)-1,3,4-oxadiazole (4-PMOX), and their corrosion-inhibition efficacy against mild steel corrosion in 1 N HCl, is evaluated using weight loss from 303 to 323 K, Electrochemical Impedance Spectroscopy (EIS), Potentiodynamic Polarization (PDP), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), UV-Vis spectroscopy, along with theoretical evaluation. Both POX and 4-PMOX exhibit excellent inhibition efficiency, with values reaching 97.83% and 98% at 500 ppm, respectively. The PDP analysis reveals that both derivatives act as mixed-type inhibitors. The Langmuir adsorption isotherm provides insights into the adsorption phenomena, demonstrating that 4-PMOX exhibits superior adsorption behavior on the mild steel surface compared to POX. This finding is further supported by SEM, DFT, RDF, and MSD analyses. Quantum mechanical parameters, including EHOMO, ELUMO, dipole moment (µ), energy gap (ΔE), etc., are in good agreement with the effectiveness of inhibition performance revealing ΔE values of 3.10 and 2.75 for POX and 4-PMOX, respectively. The results obtained from this study hold significant implications for researchers aiming to design more efficient organic inhibitors to combat metal corrosion.

Experimental and computational studies on the corrosion inhibition potential of a novel synthesized thiophene and pyridine-based 1,3,4-oxadiazole hybrid against mild steel corrosion in 1 N HCl.

A convenient synthesis of a novel 1,3,4-oxadiazole derivative, specifically known as, 2-(5-methylthiophen-2-yl)-5-(pyridin-3-yl)-1,3,4-oxadiazole (MTPO), is reported along with a comprehensive evaluation of its ability to inhibit the corrosion of mild steel (MS) in a 1 N HCl environment using weight loss, EIS, PDP, SEM, EDX, and UV-Vis spectroscopy. The investigated inhibitor expressed excellent inhibition efficiency (99.05% at 500 ppm, 298 K) with a mixed-type inhibitory mechanism as demonstrated by the PDP technique. Furthermore, MTPO followed Langmuir adsorption isotherm, which provides insights into the adsorption phenomena, demonstrating that it exhibits superior adsorption behavior on the MS surface compared. In silico investigations, using DFT computation and MD simulation complements the experimental outcomes revealing strong adsorbing attributes of the MTPO hybrid with the ω - and ω + values of 8.8882 eV and 4.4787 eV, respectively. In addition, the radial distribution function also addressed the chemisorption behavior of MTPO. This article also takes into consideration the various ways in which the inhibitor interacts with the mild steel, offering potential insights for developing strategies to mitigate metal dissolution in acidic environments.