A 6-month randomized, double-blind, placebo-controlled trial of weekly exenatide in adolescents with obesity.

BACKGROUND: Pharmacological treatment options for adolescents with obesity are very limited. Glucagon-like-peptide-1 (GLP-1) receptor agonist could be a treatment option for adolescent obesity. OBJECTIVE: To investigate the effect of exenatide extended release on body mass index (BMI)-SDS as primary outcome, and glucose metabolism, cardiometabolic risk factors, liver steatosis, and other BMI metrics as secondary outcomes, and its safety and tolerability in adolescents with obesity. METHODS: Six-month, randomized, double-blinded, parallel, placebo-controlled clinical trial in patients (n = 44, 10-18 years, females n = 22) with BMI-SDS > 2.0 or age-adapted-BMI > 30 kg/m2 according to WHO were included. Patients received lifestyle intervention and were randomized to exenatide extended release 2 mg (n = 22) or placebo (n = 22) subcutaneous injections given once weekly. Oral glucose tolerance tests (OGTT) were conducted at the beginning and end of the intervention. RESULTS: Exenatide reduced (P < .05) BMI-SDS (-0.09; -0.18, 0.00), % BMI 95th percentile (-2.9%; -5.4, -0.3), weight (-3 kg; -5.8, -0.1), waist circumference (-3.2 cm; -5.8, -0.7), subcutaneous adipose tissue (-552 cm3 ; -989, -114), 2-hour-glucose during OGTT (-15.3 mg/dL; -27.5, -3.1), total cholesterol (11.6 mg/dL; -21.7, -1.5), and BMI (-0.83 kg/m2 ; -1.68, 0.01) without significant change in liver fat content (-1.36; -3.12, 0.4; P = .06) in comparison to placebo. Safety and tolerability profiles were comparable to placebo with the exception of mild adverse events being more frequent in exenatide-treated patients. CONCLUSIONS: Treatment of adolescents with severe obesity with extended-release exenatide is generally well tolerated and leads to a modest reduction in BMI metrics and improvement in glucose tolerance and cholesterol. The study indicates that the treatment provides additional beneficial effects beyond BMI reduction for the patient group.

Seroprevalence of canine herpesvirus-1 and Brucella canis in Finnish breeding kennels with and without reproductive problems.

We compared the serological status of Brucella canis and canine herpesvirus-1 (CHV-1) in Finnish breeding kennels with and without reproductive problems. Dogs from kennels with reproductive problems had significantly higher CHV-1 titres than dogs from kennels having no reproductive problems (p < 0.001). In dogs from kennels with reproductive problems 100% (32/32) had positive titres, whereas in dogs from kennels without reproductive problems 65% (22/34) had positive titres. The median titre for dogs from kennels with reproductive problems was 1 : 160 and for dogs from kennels without reproductive problems 1 : 80. The high prevalence of positive CHV-1 titres in this study indicates that prevention of the disease is difficult and reinforces the need to minimize the reproductive problems caused by CHV-1. All 388 dogs from 94 kennels had negative B. canis titres.

Methodological aspects of brain activation studies: cerebral blood flow determined with [15O]butanol and positron emission tomography.

In this methodological study, a procedure for measuring regional CBF (rCBF) with positron emission tomography and 15O-labelled tracers is optimized. Four healthy volunteers were subjected to eight studies with use of [15O]butanol as a tracer: four times while reading aloud and four times while reading silently from a phonologically balanced list of single words. The gain from these repeated intra-individual studies of the same activation state (fractionation) was demonstrated in terms of noise-equivalent counts in a phantom study. A computerized brain atlas was used to reformat the images to a common anatomical representation, thereby minimizing the effects of inter- and intra-individual anatomical and positional variations. This allowed the formation of inter- and intra-individual average subtraction images with error estimates. Differences between the two activation states were detected with use of an exploratory significance map based on a paired Student's t test. The results compared well with Friston's method of determining levels of statistical significance. No difference was obtained when comparing results from rCBF images and images generated from measurement of uptake of the tracer. The paradigm chosen for activation was shown to yield a constant activation level during the repeated measurements (i.e., no habituation).

The C15O2 build-up technique to measure regional cerebral blood flow and volume of distribution of water.

A new method to measure regional CBF (rCBF) and volume of distribution of water is presented. It centres on recording the tissue build-up and retention of 15O-labelled water during the continuous inhalation of 15O-labelled carbon dioxide. Simultaneously, the arterial concentration is continuously monitored, and corrections for delay and dispersion in the recorded response are made by curve fitting. The values for the volume of distribution of water obtained in four normal subjects were close to reported in vitro values. Using the same fixed distribution volumes for both build-up and steady-state studies resulted in comparable rCBF values for both techniques.

Attenuation correction using count-limited transmission data in positron emission tomography.

Poisson noise in transmission data can have a significant influence on the statistical uncertainty of PET measurements, particularly at low transmission count rates. In this paper, we investigate the effect of transmission data processing on noise and quantitative accuracy of reconstructed PET images. Differences in spatial resolution between emission and transmission measurements due to transmission data smoothing are shown to have a significant influence on quantitative accuracy and can lead to artifacts in the reconstructed image. In addition, the noise suppression of this technique is insufficient to greatly reduce transmission scan times. Based on these findings, improved strategies for processing count-limited transmission data have been developed, including a method using segmentation of attenuation images. Using this method, accurate attenuation correction can be performed using transmission scan times as low as 2 min without increasing noise in reconstructed PET images.

Validation of PET-acquired input functions for cardiac studies.

To validate the determination of the arterial input function by noninvasive dynamic PET imaging, measurements of blood-pool activity in canine LV by PET were compared to beta probe measurements of arterial blood withdrawn directly from the LV. PET scans were done during intravenous bolus injections of [13N]ammonia or 82Rb, while the activity of blood withdrawn continuously from a catheter inserted in the LV was measured with a beta probe. PET determinations of LV blood-pool activity were compared with dispersion-corrected beta probe time-activity curves. In 15 experiments involving four dogs under a wide range of physiologic conditions, LV time-activity curves obtained with PET matched well in shape with those obtained with the beta probe. Linear regression yielded slopes within 10% of unity (95% confidence interval) and high correlation (r greater than 0.968, p less than 0.001). We conclude that noninvasive measurement of the arterial input function by dynamic PET imaging is valid.

Whole-body FDG-PET imaging for staging of Hodgkin's disease and lymphoma.

UNLABELLED: Accurate staging of Hodgkin's disease (HD) and non-Hodgkin's lymphoma (NHL) is important for treatment management. In this study, the utility of 2-[18F]fluoro-2-deoxy-D-glucose (FDG) whole-body PET was evaluated as an imaging modality for initial staging or restaging of 7 HD and 11 NHL patients. METHODS: Whole-body PET-based staging results were compared to the patient's clinical stage based on conventional staging studies, which included combinations of CT of the chest, abdomen and pelvis, MRI scans, gallium scans, lymphangiograms, staging laparatomies and bone scans. RESULTS: Accurate staging was performed in 17 of 18 patients using a whole-body PET-based staging algorithm compared to the conventional staging algorithm in 15 of 18 patients. In 5 of 18 patients, whole-body PET-based staging showed additional lesions not detected by conventional staging modalities, whereas conventional staging demonstrated additional lesions in 4 of 18 patients not detected by whole-body PET. The total cost of conventional staging was $66,292 for 16 CT chest scans, 16 CT abdominal/pelvis scans, three limited MRI scans, four bone scans, five gallium scans, two laparotomies and one lymphangiogram. In contrast, scans cost $36,250 for 18 whole-body PET studies and additional selected correlative studies: one plain film radiograph, one limited CT, one bone marrow scan, one upper GI and one endoscopy. CONCLUSION: A whole-body FDG-PET-based staging algorithm may be an accurate and cost-effective method for staging or restaging HD and NHL.

Whole-body positron emission tomography: Part I. Methods and performance characteristics.

Methods for whole-body PET imaging have been developed to provide a clinical tool for the detection and evaluation of primary and metastatic cancers. The axial FOV of the PET system is extended by imaging at multiple bed positions to cover the whole body. In typical rectilinear PET scans, only a small fraction of the data is collected to form two-dimensional projection images. In this work, 100% of the projection data was collected to form the two-dimensional projection images. These projection images were generated for continuous angles over 180 degrees by resorting sinogram data. In addition, tomographic images were formed by using filtered backprojection reconstruction without attenuation correction. Coronal and sagittal cuts were then extracted from the three-dimensional data set. The tomographic images were reconstructed to a resolution of 10.8 mm in all dimensions because of statistical limitations of the data. Both methods of image formation resulted in images of high quality with the tomographic reconstruction providing the highest contrast and resolution. An acquisition time of 1-2 min/bed position after a 10-mCi injection of [18F]fluoride ion or [18F]FDG was found to give a sufficient number of counts for producing images of good resolution and contrast, from a total scanning time of 32-64 min.

Evaluation of the skeletal kinetics of fluorine-18-fluoride ion with PET.

To evaluate the feasibility of quantitatively assessing regional skeletal fluoride uptake in humans in focal and generalized bone disease, we investigated the skeletal kinetics of [18F]fluoride ion with dynamic PET imaging. Dynamic image sets were acquired over a 60-min interval in a multiplane PET device, and input functions (plasma 18F time-activity curves) were measured directly from arterialized blood and, in some cases, determined from image-derived left ventricular cavity activity measurements. Our results indicate: 1. A steady-state ratio of [18F]fluoride ion concentration in plasma to whole blood greater than unity (1.23 for plasma to directly assayed whole blood and 1.44 for plasma to left ventricular cavity imaged concentrations. This concentration difference produces a scaling factor that must be considered when using image derived or directly measured input functions. 2. The preferred tracer kinetic model configuration for [18F]fluoride ion skeletal kinetics is a three compartment model that includes a "bound" and "unbound" bone [18F]fluoride ion compartment. 3. The rate constant for forward transport of [18F]fluoride ion from plasma to the extravascular space of bone (K1) and the regional blood volume parameter generate estimates of bone blood flow and vascular volume, respectively, that are in the physiologic range of reported for mammals. Estimates of the uptake constant for fluoride in bone, using nonlinear regression (KNLR = 0.0360 +/- 0.0064 ml/min/ml), are in very good agreement with an estimate of the same parameter obtained with Patlak graphical analysis (KPAT = 0.0355 +/- 0.0061 ml/min/ml). 4. Generating parametric images of KPAT facilitates quantification of regional bone [18F]fluoride ion kinetics. The method is computationally practical, and, with either the parametric imaging approach or with standard region of interest analysis, can be used to generate quantitative estimates of fluoride uptake (a "bone metabolic index") in focal skeletal regions or in more generalized distributions.

A simplified method for quantification of myocardial blood flow using nitrogen-13-ammonia and dynamic PET.

The utility of Patlak graphical analysis was investigated for quantification of regional myocardial blood flow (MBF) and for generating parametric images of MBF with 13N-ammonia and dynamic PET imaging in dogs and humans. MBF was estimated by a two-compartment model fit of the initial 2 min of the kinetic data and by Patlak graphical analysis of the initial 2, 3, or 4 min of data. In 11 dog studies, MBF by compartmental model fitting linearly correlated with MBF by microspheres (correlation coefficient (r) = 0.99, slope = 0.92) and by Patlak graphical analysis (r = 0.99, slope = 0.90). In 10 normal human studies, MBF obtained by the Patlak graphical analysis agreed well with MBF obtained by the compartmental model fitting (r = 0.96, slope = 1.04). Good agreement of the MBF estimates was also observed in 10 coronary artery disease patient studies (r = 0.96). Patlak graphical analysis permitted generation of parametric images of MBF. The parametric images of MBF, in units of ml/min/g, are of good image quality and have relatively low noise levels. We conclude that regional MBF can be noninvasively and conveniently measured with dynamic 13N-ammonia PET using either a two-compartment model or Patlak graphical analysis. MBF parametric images generated with the Patlak graphical analysis both map the distribution and quantitate the magnitude of myocardial perfusion abnormalities.

Human pharmacokinetic and dosimetry studies of [(18)F]FHBG: a reporter probe for imaging herpes simplex virus type-1 thymidine kinase reporter gene expression.

UNLABELLED: 9-[4-[(18)F]fluoro-3-(hydroxymethyl)butyl]guanine ([(18)F]FHBG) has been used as a reporter probe to image expression of herpes simplex virus type-1 thymidine kinase (HSV1-tk) reporter gene in living animals. Our aim was to study the kinetics, biodistribution, stability, dosimetry, and safety of [(18)F]FHBG in healthy human volunteers, preparatory to imaging patients undergoing HSV1-tk gene therapy. METHODS: [(18)F]FHBG was synthesized with a specific activity of 37,000--444,000 GBq/mmol and a radiochemical purity > 99%. Ten healthy volunteers consented to participate in the study. A transmission scan was obtained before bolus injection of 70.3--229.4 MBq [(18)F]FHBG into a hand vein, followed by dynamic PET imaging with 4 consecutive emission scans. Warmed hand-vein blood was withdrawn at various times after injection for blood time--activity measurements. Electrocardiography, blood pressure, and blood and urine pharmacologic parameters were measured before and after injection of the [(18)F]FHBG tracer (n = 5). The stability of [(18)F]FHBG in the urine was analyzed. Attenuation-corrected images were reconstructed using the ordered-subsets expectation maximization algorithm. Image region-of-interest time-activity data were used with the MIRD program to estimate absorbed radiation dosages. RESULTS: [(18)F]FHBG had rapid blood clearance; only 8.42% +/- 4.76% (mean +/- SD) of the peak blood activity remained at approximately 30 min. The average ratio of plasma activity to whole-blood activity during the study was 0.91 +/- 0.04. Penetration of [(18)F]FHBG across the blood-brain barrier was not observed. The primary routes of clearance were renal and hepatobiliary. High activities were observed in the bladder, gut, liver, and kidneys, but <0.0002% of the injected dose per gram was observed in other tissues. In the urine, 83% of activity 180 min after injection was stable [(18)F]FHBG. Blood and urine pharmacologic parameters did not change significantly after injection of the [(18)F]FHBG tracer. The bladder absorbed the highest radiation dose. CONCLUSION: [(18)F]FHBG has the desirable in vivo characteristics of stability, rapid blood clearance, low background signal, biosafety, and acceptable radiation dosimetry in humans. This study forms the foundation for using [(18)F]FHBG in applications to monitor HSV1-tk reporter gene expression.

Automated iterative three-dimensional registration of positron emission tomography images.

Two types of image similarity measures, the sum of absolute differences (SAD) and the stochastic sign change (SSC), were compared for three-dimensional registration of images from PET. To test the accuracy of both registration methods, 30 FDG brain studies, 40 13N-ammonia cardiac studies and 20 FDG liver tumor studies (where each image set contained 15 image planes, 128 x 128 pixels per plane) were made into worse case conditions by creating image sets of low counts and extreme defects. These images were then registered to the reference images that had been moved in three dimensions into a random set of known translations, rotations and normalization factors (x, y, z, theta, rho, sigma, nf). Neither method required any external fiduciary markers or operator interventions to register a set of images. The optimization of the image similarity (using the SAD or SSC) was performed with the simplex method and registration was completed within 10 min of computation time on a low-end workstation. Overall, the SAD method had an average inplane (x, y) registration error of 0.5 +/- 0.5 mm, a z-axis registration error of 1.1 +/- 1.1 mm, an inplane rotational error of 0.5 +/- 0.4 degrees, an out-of-plane rotational error of 1.1 +/- 1.2 degrees and a normalization factor error of 0.015 +/- 0.016. The SSC method had an average inplane (x, y) registration error of 0.6 +/- 0.5 mm, a z-axis registration error of 1.1 +/- 1.1 mm, an inplane rotational error of 0.7 +/- 0.5 degrees, an out-of-plane rotational error of 1.0 +/- 1.2 degrees and a normalization factor error of 0.014 +/- 0.014. This study demonstrates that either the SAD or SSC method for measuring image similarity, combined with the simplex method for function optimization, are accurate methods for registration of a wide variety of PET images including low count studies and those with marked interval changes in the pattern of count distribution.

The role of positron emission tomography in oncology and other whole-body applications.

Imaging and quantifying biochemical and physiological processes with PET clearly has major potential significance for all organ systems and many disease states. Although the full utility and potential of emerging new applications of PET in organs other than the heart and brain must be demonstrated in basic and clinical research studies, the rapidly accumulating aggregate experience in oncology in particular, and in other organ systems and disease states as well, indicates that PET is now truly becoming a modality of both clinical and investigative use for the body as a whole as well as for specific organ systems. Whole-body PET FDG imaging (Fig 9) illustrates the potential of biochemical imaging to map the distribution of cancer throughout the body. With the growing list of radiopharmaceutical and quantitative techniques applicable to cancer studies with PET, this field will continue to realize significant growth.

An evaluation of a two-dimensional array detector for high resolution PET.

A two-dimensional array detector system, consisting of 4x8 matrices of bismuth germanate (BGO) crystals coupled to four photomultipliers, was evaluated. Coincidence timing resolution of a pair of array detectors was 6.1 ns FWHM and 11.3 ns FWTM. Energy resolution per individual crystal ranged from 16.8 to 24.1% FWHM at 511 keV for an amplitude variation of a factor of 2.8. The signals from the photomultipliers were summed pairwise, the pairs in each dimension subtracted, and the differences divided by the amplitude of the signal summed from all four photomultipliers. The resulting two-pulse-height spectra contained peaks corresponding to the row or column containing the detector of interaction. Six conditions of detector identification were tested. The correct identification of detector ranged from 76% to 87% of the events. The largest single factor in improving crystal identification and spatial resolution was energy discrimination.

Evaluation of a 3D reconstruction algorithm for multi-slice PET scanners.

A fully 3D reconstruction algorithm based on filtered backprojection was evaluated for the reconstruction of data obtained with multi-slice positron emission tomography (PET) scanners which have had the septa removed. This algorithm uses forward-projection through the reconstructed images of a 2D subset of the data to complete the 3D dataset thus satisfying the condition of shift invariance. This is followed by 3D filtered backprojection. Axial sampling was doubled by combining adjacent polar angles, thus improving reconstructed axial resolution. The algorithm was tested using real and simulated datasets and gave high quality reconstructions without artifacts over a wide range of imaging conditions. Events are placed accurately throughout the imaging volume as determined by measurements with a MRI/PET registration phantom. The forward-projection step leads to degradation in image resolution due to insufficient axial and transaxial sampling. This effect is amplified if multiple iterations of the algorithm are used, with little decrease in image noise. Changing the filter employed in the initial 2D reconstruction can be used to alter the noise and resolution characteristics of the 3D images. This algorithm has proved very robust at reconstructing 3D PET data and is relatively fast. Those small problems which exist can be attributed to detector sampling problems, especially in the axial direction, which is a consequence of the geometry of these scanners, which are designed primarily for 2D data acquisition.

An improved analytical detector response function model for multilayer small-diameter PET scanners.

The optimization of spatial resolution is a critical consideration in the design of small-diameter positron emission tomography (PET) scanners for animal imaging, and is often addressed with Monte Carlo simulations. As a faster and simpler solution, we have developed a new analytical model of the PET detector response function, and implemented the model for a small single-slice, multilayer PET scanner. The accuracy of the model has been assessed by comparison with both Monte Carlo simulations and experimental measurements published in the literature. Results from the analytical model agreed well with the Monte Carlo method, being noise free and two to three orders of magnitude faster. The only major discrepancy was a slight underestimation of the width of the point spread function by the analytical method as inter-crystal scatter is neglected. We observed good agreement between the predictions of the model and experimental measurements. For two large-diameter scanners additional discrepancies were seen due to photon acollinearity, which is not considered in the model. We have shown that the simple and fast analytical detector response function model can provide accurate estimates of spatial resolution for small-diameter PET scanners, and could be a useful tool for several applications, complementing or cross-validating other simulation methods.

A comparison of normalization effects on three whole-body cylindrical 3D PET systems.

Normalization coefficients in three-dimensional positron emission tomography (3D PET) are affected by parameters such as camera geometry and the design and arrangement of the block detectors. In this work, normalization components for three whole-body 3D-capable tomographs (the GE Advance, the Siemens/CTI962/HR+ and the Siemens/CTI951R) are compared by means of a series of scans using uniform cylindrical and rotating line sources. Where applicable, the manufacturers' normalization methods are validated, and it is shown that these methods can be improved upon by using previously published normalization protocols. Those architectural differences between the three tomographs that affect normalization are discussed with a view to drawing more general conclusions about the effect of machine architecture on normalization. The data presented suggest that uniformity of system response becomes easier to achieve as the uniformity of crystal response within the detector block is improved.

Morphometry of normal and teratozoospermic canine sperm heads using an image analyzer: work in progress.

Combining the traditional morphologic evaluation of spermatozoa with computer assisted image analysis adds randomness, objectivity, repeatability and accuracy to morphometric measurements. We collected semen from 10 fertile, normospermic dogs aged 1 to 7 yr and from 3 teratozoospermic breed-matched dogs. Sperm head morphology was examined in Giemsa-stained smears by light microscopy, using a computer-assisted image analyzer and by transmission electron microscopy. We found significant variation in sperm head area, length, width and degree of roundness among normospermic individual dogs, indicating that it would be necessary to examine many more dogs before the size and shape of normal dog spermatozoa could be determined. The normospermic dogs were used as controls for the teratozoospermic cases. Case 1: A 2-yr-old subfertile Cavalier King Charles Spaniel had semen with small and narrow-based sperm heads and a proximal cytoplasmic droplet in most of the spermatozoa. With the image analysis system, sperm heads were shown to be smaller and more oval than in normospermic dogs. The variatons in size and shape were similar in magnitude to those of control dogs. An examined infertile half-brother had similar semen quality. Case 2: A 3-yr-old Petit Basset Griffon Vendeen with 2 unsuccesfull matings exhibited spermatozoa with severe abnormalities. Measured by image analyzer, sperm heads were irregular in shape and very small in area. One of the two littermates examined had semen of the same quality as the case dog. Case 3: A 3-yr-old fertile Golden Retriever had semen with giant sperm heads in about 50% of spermatozoa. Image analyzing results revealed 2 populations of different sized sperm heads. Giant heads consisted of 52.2% of all spermatozoa. The results of the study reported here suggest that the image analysis technique may be useful in evaluating structural changes in sperm morphology, supplementing visual assessment that is used in conventional methods.

Impaired semen quality of AI bulls fed with moldy hay: a case report.

The daily quality control of semen at a Finnish artificial insemination (AI) bull station is based on subjective motility and sperm morphology of young bulls entering the semen collection program. Semen quality dropped suddenly in autumn 1998. During 5 consecutive months, the number of rejected ejaculates and discarded frozen semen batches due to poor motility increased, and the number of all forms of abnormal spermatozoa increased. However, for the accepted ejaculates, a 60 day nonretum rate was normal. The summer of 1998 in Finland was rainy, and the hay used in the AI station was visibly moldy. Immunoassay and gas chromatography-mass spectrometry (GC-MS) detected Fusarium mycotoxins HT-2 and T-2, but no zearalenone in the hay. Occurrence of mycotoxins such as T-2 and HT-2 in the moldy hay coincided with, and may have been responsible for the impaired semen quality in AI bulls. This case report will draw the attention to the possible hazards when feeding moldy hay.

A novel automated fluorometric assay to evaluate sperm viability and fertility in dairy bulls.

The artificial insemination (AI) industry is in need of an objective and rapid, but inexpensive method to evaluate frozen thawed bull semen ejaculates. This study presents a new fluorescence method that uses an automatized fluorometer and fluorophore stain propidium iodide that stains only those cells with damaged membranes. The fluorescence of the semen sample and the totally killed subsample were measured simultaneously, and viability was calculated. Every semen batch was analyzed before use in AI. For fertility evaluation, the nonreturn rates (NR%) obtained from 92,120 inseminations with the analyzed batches were recorded from 166 bulls (436 batches). This study confirms a 3.9% better NR% for the Finnish Holstein-Friesian breed than for Finnish Ayrshire. There was a clear seasonality in NR%: it differed (5.3%) significantly, being best in summer to autumn (June to October) and lowest in winter (January to March). The fluorometer method was fast and easy. The correlation between the total number of viable spermatozoa in an insemination dose and field fertility was low but significant (r = 0.051, P = 0.016), suggesting that the plasma membrane integrity evaluation can serve as a cost-beneficial quality control method of frozen-thawed semen at bull stations.