Effects of 630 nm laser on apoptosis, metastasis, invasion and epithelial-to-mesenchymal transition of human lung squamous cell carcinoma H520 cells mediated by hematoporphyrin derivatives.

Photodynamic therapy (PDT) has significant advantages in the treatment of malignant lung tumors. The research on the mechanism of PDT mediated by hematoporphyrin derivatives (HPD) and its cytotoxic effects on lung cancer cells has primarily focused on lung adenocarcinoma cells. However, the impact of HPD-PDT on lung squamous cell carcinoma has not been thoroughly studied. This study aimed to investigate the effects of 630 nm laser on apoptosis, metastasis, invasion, and epithelial-mesenchymal transition (EMT) in human lung squamous cell carcinoma H520 cells mediated by HPD. H520 cells were divided into four groups: control group, photosensitizer group, irradiation group, and HPD-PDT group. Cell proliferation was assessed using CCK8 assay; cell apoptosis was detected by Hoechst 33258 staining and flow cytometry; cell migration and invasion abilities were evaluated using wound-healing and invasion assays; and protein and mRNA expressions were analyzed by Western blot and reverse transcription-polymerase chain reaction (RT-PCR) respectively. Results showed that HPD-PDT significantly inhibited cell proliferation, promoted apoptosis (P < 0.05), suppressed cell migration and invasion (P < 0.05), decreased Bcl-2 mRNA expression, and increased Bax and Caspase-9 mRNA expression(P < 0.05). Western blotting analysis indicated increased expression of Bax, Caspase-9, and E-cadherin, and decreased expression of Bcl-2, N-cadherin, and Vimentin (P < 0.05). In conclusion, 630 nm laser mediated by HPD promoted cell apoptosis via upregulation of Bax and caspase-9, and downregulation of Bcl-2, and inhibited cell migration and invasion by regulating EMT in H520 cells.

Apex structures enhance water drainage on leaves.

The rapid removal of rain droplets at the leaf apex is critical for leaves to avoid damage under rainfall conditions, but the general water drainage principle remains unclear. We demonstrate that the apex structure enhances water drainage on the leaf by employing a curvature-controlled mechanism that is based on shaping a balance between reduced capillarity and enhanced gravity components. The leaf apex shape changes from round to triangle to acuminate, and the leaf surface changes from flat to bent, resulting in the increase of the water drainage rate, high-dripping frequencies, and the reduction of retention volumes. For wet tropical plants, such as Alocasia macrorrhiza, Gaussian curvature reconfiguration at the drip tip leads to the capillarity transition from resistance to actuation, further enhancing water drainage to the largest degree possible. The phenomenon is distinct from the widely researched liquid motion control mechanisms, and it offers a specific parametric approach that can be applied to achieve the desired fluidic behavior in a well-controlled way.

Bioinspired inner microstructured tube controlled capillary rise.

Effective, long-range, and self-propelled water elevation and transport are important in industrial, medical, and agricultural applications. Although research has grown rapidly, existing methods for water film elevation are still limited. Scaling up for practical applications in an energy-efficient way remains a challenge. Inspired by the continuous water cross-boundary transport on the peristome surface of Nepenthes alata, here we demonstrate the use of peristome-mimetic structures for controlled water elevation by bending biomimetic plates into tubes. The fabricated structures have unique advantages beyond those of natural pitcher plants: bulk water diode transport behavior is achieved with a high-speed passing state (several centimeters per second on a milliliter scale) and a gating state as a result of the synergistic effect between peristome-mimetic structures and tube curvature without external energy input. Significantly, on further bending the peristome-mimetic tube into a "candy cane"-shaped pipe, a self-siphon with liquid diode behavior is achieved. Such a transport mechanism should inspire the design of next generation water transport devices.

Achieving Super-Metallophobicity on Silicon-based Ceramics at High Temperature.

As a critical concept in physical chemistry, superwettability is widely concerned in both fundamental science and practical engineering in past few decades. Despite this, investigation on high temperature superwettability is still a void, which is significant both in scientific and industrial fields. Herein, a ceramic with specific high temperature non-wetting property, Si2N2O is proposed. Compared with other materials, Si2N2O is elucidated with better practical non-wetting property against various non-ferrous metals. Combining with micro-nanostructures, the metallophobicity is further improved (contact angle >150° and contact angle hysteresis ≈0°). The extraordinary metal repellency is defined as "super-metallophobicity", which is proved to be induced by distinctive thermodynamic and dynamic wetting behavior on the rough surface. The research of super-metallophobicity not only sheds light on superwettability at high temperature, but also offers worthy insights for future potential material design in a wide range of applications, such as metallurgy, 3D printing and semiconductor industry.

Green processing via surface diffuse atmospheric plasma to enhance the dyeing performance on polylactic acid fabric.

Poor dyeing performance has been a major defect of polylactic acid (PLA) fibers, which is caused by the lack of active chemical groups in PLA, and hinders the widespread use of this biodegradable material. Most of the existing chemical modification methods are not environmentally friendly and produce effluents. Herein, we report a green, efficient and continuous method to process PLA fibers via surface diffuse atmospheric plasma for the improvement of its hydrophilicity and dyeing performance. PLA fibers were processed via atmospheric plasma for grafting oxygen-containing functional groups, such as carboxyl, to achieve hydrophilicity and, meanwhile, strengthen the binding interactions with various dye molecules via covalent bonds, ionic bonds, or hydrogen bonds. In addition, different mechanisms of improving the dyeing performance on plasma-modified PLA fibers with different kinds of dyes have been discussed. This approach of material modification involves no chemical additives and has high processing efficiency, showing the potential applicability of green treatment to products in various fields.

Infinite Self-Propulsion of Circularly On/Discharged Droplets.

Self-propulsion of droplets in a controlled and long path at a high-speed is crucial for organic synthesis, pathological diagnosis and programable lab-on-a-chip. To date, extensive efforts have been made to achieve droplet self-propulsion by asymmetric gradient, yet, existing structural, chemical, or charge density gradients can only last for a while (<50 mm). Here, this work designs a symmetrical waved alternating potential (WAP) on a superhydrophobic surface to charge or discharge the droplets during the transport process. By deeply studying the motion mechanisms for neutral droplets and charged droplets, the circularly on/discharged droplets achieve the infinite self-propulsion (>1000 mm) with an ultrahigh velocity of meters per second. In addition, after permutation and combination of two motion styles of the droplets, it can be competent for more interesting work, such as liquid diode and liquid logic gate. Being assembled into a microfluidic chip, the strategy would be applied in chemical synthesis, cell culture, and diagnostic kits.

Reconfigurable Magnetic Liquid Building Blocks for Constructing Artificial Spinal Column Tissues.

All-liquid molding can be used to transform a liquid into free-form solid constructs, while maintaining internal fluidity. Traditional biological scaffolds, such as cured pre-gels, are normally processed in solid state, sacrificing flowability and permeability. However, it is essential to maintain the fluidity of the scaffold to truly mimic the complexity and heterogeneity of natural human tissues. Here, this work molds an aqueous biomaterial ink into liquid building blocks with rigid shapes while preserving internal fluidity. The molded ink blocks for bone-like vertebrae and cartilaginous-intervertebral-disc shapes, are magnetically manipulated to assemble into hierarchical structures as a scaffold for subsequent spinal column tissue growth. It is also possible to join separate ink blocks by interfacial coalescence, different from bridging solid blocks by interfacial fixation. Generally, aqueous biomaterial inks are molded into shapes with high fidelity by the interfacial jamming of alginate surfactants. The molded liquid blocks can be reconfigured using induced magnetic dipoles, that dictated the magnetic assembly behavior of liquid blocks. The implanted spinal column tissue exhibits a biocompatibility based on in vitro seeding and in vivo cultivating results, showing potential physiological function such as bending of the spinal column.

Turbo-Synergistic Oily Wastewater Remediation in Bio-Inspired Cone Array Barrel.

Oily wastewater discharge causes not only the pollution of environment but also the waste of resources. Existing technologies for wastewater remediation, such as membrane and particle methods, are variable and effective, but are difficult for achieving continuous and rapid oil-water separation. Here, with the synergy of turbo stirring, a strategy for emulsion separation is demonstrated based on the bio-inspired cone array barrel. Under the centrifugal force, oil droplets in emulsion are thrown onto the cones arrayed on inner wall due to the Coriolis effect, captured by microstructures on cone surface and then penetrate out through the superhydrophobic pores, while only the remediated water remains. The separation technique maintains a high efficiency of above 99.5% for over 30 times of use, as well as for emulsions with variable ingredients. This structure-dynamics synergistic separation strategy evolves the future technologies on water purification in industrial and daily processes.

Superamphiphilic TiO2 Composite Surface for Protein Antifouling.

Unwanted protein adsorption deteriorates fouling processes and reduces analytical device performance. Wettability plays an important role in protein adsorption by affecting interactions between proteins and surfaces. However, the principles of protein adsorption are not completely understood, and surface coatings that exhibit resistance to protein adsorption and long-term stability still need to be developed. Here, a nanostructured superamphiphilic TiO2 composite (TiO2 /SiO2 ) coating that can effectively prevent nonspecific protein adsorption on water/solid interfaces is reported. The confined water on the superamphiphilic surface enables a low adhesion force and the formation of an energy barrier that plays a key role in preventing protein adsorption. This adaptive design protects the capillary wall from fouling in a harsh environment during the bioanalysis of capillary electrophoresis and is further extended to applications in multifunctional microfluidics for liquid transportation. This facile approach is not only perfectly applied in channels with complicated configurations but may also offer significant insights into the design of advanced superwetting materials to control biomolecule adhesion in biomedical devices, microfluidics, and biological assays.

Directional liquid dynamics of interfaces with superwettability.

Natural creatures use their surface structures to control directional liquid dynamics for survival. Learning from nature, artificial superwetting materials have triggered technological revolutions in many disciplines. To improve controllability, researchers have attempted to use external fields, such as thermal, light, magnetic, and electric fields, to assist or achieve controllable liquid dynamics. Emerging directional liquid transport applications have prosperously advanced in recent years but still present some challenges. This review discusses and summarizes the field of directional liquid dynamics on natural creatures and artificial surfaces with superwettabilities and ventures to propose several potential strategies to construct directional liquid transport systems for fog collection, 3D printing, energy devices, separation, soft machine, and sensor devices, which are useful for driving liquid transport or motility.

Controllable High-Speed Electrostatic Manipulation of Water Droplets on a Superhydrophobic Surface.

Biological processes and technological applications cannot work without liquid control, where versatile water droplet manipulation is a significant issue. Droplet motion is conventionally manipulated by functionalizing the target surface or by utilizing additives in the droplet, still, with uncontrolled limitation on superhydrophobic surfaces since droplets are either unable to move fast or are difficult to stop while moving. A controllable high-speed "all-in-one" no-loss droplet manipulation, that is, in-plane moving and stopping/pinning in any direction on a superhydrophobic surface, with electrostatic charging is demonstrated. The experimental results reveal that the transport speed can vary from zero to several hundreds of millimeters per second. Controlled dynamic switching between the onset moving state and the offset pinning state of a water droplet can be achieved by out-of-plane electrostatic charging. This work opens the possibility of droplet control techniques in various applications, such as combinatory chemistry, biochemical, and medical detection.

Uniform Spread of High-Speed Drops on Superhydrophobic Surface by Live-Oligomeric Surfactant Jamming.

Inkjet printing of water-based inks on superhydrophobic surfaces is important in high-resolution bioarray detection, chemical analysis, and high-performance electronic circuits and devices. Obtaining uniform spreading of a drop on a superhydrophobic surface is still a challenge. Uniform round drop spreading and high-resolution inkjet printing patterns are demonstrated on superhydrophobic surfaces without splash or rebound after high-speed impacting by introducing live-oligomeric surfactant adhesion. During impact, the live-oligomeric surfactant molecules aggregate into dynamic, wormlike micelle networks, which jam at the solid-liquid interface by entangling with the surface micro/nanostructures to pin the contact line and jam at the spreading periphery to keep the uniform spreading lamellar shape. This efficient uniform spreading of high-speed impact drops opens a promising avenue to control drop impact dynamics and achieve high-resolution printing.

Ballistic Jumping Drops on Superhydrophobic Surfaces via Electrostatic Manipulation.

The ballistic ejection of liquid drops by electrostatic manipulating has both fundamental and practical implications, from raindrops in thunderclouds to self-cleaning, anti-icing, condensation, and heat transfer enhancements. In this paper, the ballistic jumping behavior of liquid drops from a superhydrophobic surface is investigated. Powered by the repulsion of the same kind of charges, water drops can jump from the surface. The electrostatic acting time for the jumping of a microliter supercooled drop only takes several milliseconds, even shorter than the time for icing. In addition, one can control the ballistic jumping direction precisely by the relative position above the electrostatic field. The approach offers a facile method that can be used to manipulate the ballistic drop jumping via an electrostatic field, opening the possibility of energy efficient drop detaching techniques in various applications.