Singlet Fission in Pechmann Dyes: Planar Chromophore Design and Understanding.

Singlet fission in organic chromophores holds the potential for enhancing photovoltaic efficiencies beyond the single-junction limit. The most basic requirement of a singlet fission material is that it has a large energy gap between its first singlet and triplet excited states. Identifying such compounds is not simple and has been accomplished either through computational screening or by subtle modifications of previously known fission materials. Here, we propose an approach that leverages ground and excited-state aromaticity combined with double-bond conformation to establish simple qualitative design rules for predicting fundamental optical properties without the need for computational modeling. By investigating two Pechmann dye isomers, we demonstrate that although their planarity and degree of charge transfer are similar, singlet fission is active in the isomer with a trans-conformation, while the cis-isomer exhibits greater favorability for polaronic processes, experimentally validated using ultrafast and electron spin resonance spectroscopy. Our results offer a new design perspective that provides a rational framework for tailoring optoelectronic systems to specific applications such as singlet fission or triplet-triplet annihilation.

Ligand-Directed Self-Assembly of Organic-Semiconductor/Quantum-Dot Blend Films Enables Efficient Triplet Exciton-Photon Conversion.

Blends comprising organic semiconductors and inorganic quantum dots (QDs) are relevant for many optoelectronic applications and devices. However, the individual components in organic-QD blends have a strong tendency to aggregate and phase-separate during film processing, compromising both their structural and electronic properties. Here, we demonstrate a QD surface engineering approach using electronically active, highly soluble semiconductor ligands that are matched to the organic semiconductor host material to achieve well-dispersed inorganic-organic blend films, as characterized by X-ray and neutron scattering, and electron microscopies. This approach preserves the electronic properties of the organic and QD phases and also creates an optimized interface between them. We exemplify this in two emerging applications, singlet-fission-based photon multiplication (SF-PM) and triplet-triplet annihilation-based photon upconversion (TTA-UC). Steady-state and time-resolved optical spectroscopy shows that triplet excitons can be transferred with near unity efficiently across the organic-inorganic interface, while the organic films maintain efficient SF (190% yield) in the organic phase. By changing the relative energy between organic and inorganic components, yellow upconverted emission is observed upon 790 nm NIR excitation. Overall, we provide a highly versatile approach to overcome longstanding challenges in the blending of organic semiconductors with QDs that have relevance for many optical and optoelectronic applications.

Generating Long-Lived Triplet Excited States in Narrow Bandgap Conjugated Polymers.

Narrow bandgap conjugated polymers are a heavily studied class of organic semiconductors, but their excited states usually have a very short lifetime, limiting their scope for applications. One approach to overcome the short lifetime is to populate long-lived triplet states for which relaxation to the ground state is forbidden. However, the triplet lifetime of narrow bandgap polymer films is typically limited to a few microseconds. Here, we investigated the effect of film morphology on triplet dynamics in red-emitting conjugated polymers based on the classic benzodithiophene monomer unit with the solubilizing alkyl side chains C16 and C2C6 and then used Pd porphyrin sensitization as a further strategy to change the triplet dynamics. Using transient absorption spectroscopy, we demonstrated a 0.45 ms triplet lifetime for the more crystalline nonsensitized polymer C2C6, 2-3 orders of magnitude longer than typically reported, while the amorphous C16 had only a 5 µs lifetime. The increase is partly due to delaying bimolecular electron-hole recombination in the more crystalline C2C6, where a higher energy barrier for charge recombination is expected. A triplet lifetime of 0.4 ms was also achieved by covalently incorporating 5% of Pd porphyrin into the C16 polymer, which introduced extra energy transfer steps between the polymer and porphyrin that delayed triplet dynamics and increased the polymer triplet yield by 7.9 times. This work demonstrates two synthetic approaches to generate the longest-lived triplet excited states in narrow bandgap conjugated polymers, which is of necessity in a wide range of fields that range from organic electronics to sensors and bioapplications.

Aza-Cibalackrot: Turning on Singlet Fission Through Crystal Engineering.

Singlet fission is a photophysical process that provides a pathway for more efficient harvesting of solar energy in photovoltaic devices. The design of singlet fission candidates is non-trivial and requires careful optimization of two key criteria: (1) correct energetic alignment and (2) appropriate intermolecular coupling. Meanwhile, this optimization must not come at the cost of molecular stability or feasibility for device applications. Cibalackrot is a historic and stable organic dye which, although it has been suggested to have ideal energetics, does not undergo singlet fission due to large interchromophore distances, as suggested by single crystal analysis. Thus, while the energetic alignment is satisfactory, the molecule does not have the desired intermolecular coupling. Herein, we improve this characteristic through molecular engineering with the first synthesis of an aza-cibalackrot and show, using ultrafast transient spectroscopy, that singlet fission is successfully "turned on."

Ultrafast exciton transport at early times in quantum dot solids.

Quantum dot (QD) solids are an emerging platform for developing a range of optoelectronic devices. Thus, understanding exciton dynamics is essential towards developing and optimizing QD devices. Here, using transient absorption microscopy, we reveal the initial exciton dynamics in QDs with femtosecond timescales. We observe high exciton diffusivity (~102 cm2 s-1) in lead chalcogenide QDs within the first few hundred femtoseconds after photoexcitation followed by a transition to a slower regime (~10-1-1 cm2 s-1). QD solids with larger interdot distances exhibit higher initial diffusivity and a delayed transition to the slower regime, while higher QD packing density and heterogeneity accelerate this transition. The fast transport regime occurs only in materials with exciton Bohr radii much larger than the QD sizes, suggesting the transport of delocalized excitons in this regime and a transition to slower transport governed by exciton localization. These findings suggest routes to control the optoelectronic properties of QD solids.

Mixed Small-Molecule Matrices Improve Nanoparticle Dispersibility in Organic Semiconductor-Nanoparticle Films.

Controlling the dispersibility of nanocrystalline inorganic quantum dots (QDs) within organic semiconductor (OSC):QD nanocomposite films is critical for a wide range of optoelectronic devices. This work demonstrates how small changes to the OSC host molecule can have a dramatic detrimental effect on QD dispersibility within the host organic semiconductor matrix as quantified by grazing incidence X-ray scattering. It is commonplace to modify QD surface chemistry to enhance QD dispersibility within an OSC host. Here, an alternative route toward optimizing QD dispersibilities is demonstrated, which dramatically improves QD dispersibilities through blending two different OSCs to form a fully mixed OSC matrix phase.

Quantitative Singlet Fission in Solution-Processable Dithienohexatrienes.

Singlet fission (SF) is a promising strategy to overcome thermalization losses and enhance the efficiency of single junction photovoltaics (PVs). The development of this field has been strongly material-limited, with a paucity of materials able to undergo SF. Rarer still are examples that can produce excitons of sufficient energy to be coupled to silicon PVs (>1.1 eV). Herein, we examine a series of a short-chain polyene, dithienohexatriene (DTH), with tailored material properties and triplet (T1) energy levels greater than 1.1 eV. We find that these highly soluble materials can be easily spin-cast to create thin films of high crystallinity that exhibit ultrafast singlet fission with near perfect triplet yields of up to 192%. We believe that these materials are the first solution-processable singlet fission materials with quantitative triplet formation and energy levels appropriate for use in conjunction with silicon PVs.

Molecular Encapsulation of Naphthalene Diimide (NDI) Based π-Conjugated Polymers: A Tool for Understanding Photoluminescence.

Conjugated polymers are an important class of chromophores for optoelectronic devices. Understanding and controlling their excited state properties, in particular, radiative and non-radiative recombination processes are among the greatest challenges that must be overcome. We report the synthesis and characterization of a molecularly encapsulated naphthalene diimide-based polymer, one of the most successfully used motifs, and explore its structural and optical properties. The molecular encapsulation enables a detailed understanding of the effect of interpolymer interactions. We reveal that the non-encapsulated analogue P(NDI-2OD-T) undergoes aggregation enhanced emission; an effect that is suppressed upon encapsulation due to an increasing π-interchain stacking distance. This suggests that decreasing π-stacking distances may be an attractive method to enhance the radiative properties of conjugated polymers in contrast to the current paradigm where it is viewed as a source of optical quenching.

Controlling the structures of organic semiconductor-quantum dot nanocomposites through ligand shell chemistry.

Nanocrystal quantum dots (QD) functionalised with active organic ligands hold significant promise as solar energy conversion materials, capable of multiexcitonic processes that could improve the efficiencies of single-junction photovoltaic devices. Small-angle X-ray and neutron scattering (SAXS and SANS) were used to characterize the structure of lead sulphide QDs post ligand-exchange with model acene-carboxylic acid ligands (benzoic acid, hydrocinnamic acid and naphthoic acid). Results demonstrate that hydrocinnamic acid and naphthoic acid ligated QDs form monolayer ligand shells, whilst benzoic acid ligated QDs possess ligand shells thicker than a monolayer. Further, the formation of a range of nanocomposite materials through the self-assembly of such acene-ligated QDs with an organic small-molecule semiconductor [5,12-bis((triisopropylsilyl)ethynyl)tetracene (TIPS-Tc)] is investigated. These materials are representative of a wider set of functional solar energy materials; here the focus is on structural studies, and their optoelectronic function is not investigated. As TIPS-Tc concentrations are increased, approaching the solubility limit, SANS data show that QD fractal-like features form, with structures possibly consistent with a diffusion limited aggregation mechanism. These, it is likely, act as heterogeneous nucleation agents for TIPS-Tc crystallization, generating agglomerates containing both QDs and TIPS-Tc. Within the TIPS-Tc crystals there seem to be three distinct QD morphologies: (i) at the crystallite centre (fractal-like QD aggregates acting as nucleating agents), (ii) trapped within the growing crystallite (giving rise to QD features ordered as sticky hard spheres), and (iii) a population of aggregate QDs at the periphery of the crystalline interface that were expelled from the growing TIPS-Tc crystal. Exposure of the QD:TIPS-Tc crystals to DMF vapour, a solvent known to be able to strip ligands from QDs, alters the spacing between PbS-hydrocinnamic acid and PbS-naphthoic acid ligated QD aggregate features. In contrast, for PbS-benzoic acid ligated QDs, DMF vapour exposure promotes the formation of ordered QD colloidal crystal type phases. This work thus demonstrates how different QD ligand chemistries control the interactions between QDs and an organic small molecule, leading to widely differing self-assembly processes. It highlights the unique capabilities of multiscale X-ray and neutron scattering in characterising such composite materials.

Prevalence and types of high-risk human papillomaviruses in head and neck cancers from Bangladesh.

BACKGROUND: There is a dramatic rise in the incidence of Human papillomavirus (HPV) - associated head and neck squamous cell carcinoma (HNSCC) in the world, with considerable variation by geography, gender and ethnicity. Little is known about the situation in Bangladesh, where tobacco- and areca nut-related head and neck cancers (HNCs) are the most common cancers in men. We aimed to determine the prevalence of HPV in HNSCC in Bangladesh and to explore the possible value of cell cycle markers in clinical diagnostic settings. METHODS: One hundred and ninety six archival HNSCC tissue samples were analysed for the presence of HPV DNA. The DNA quality was assured, and then amplified using a nested PCR approach. The typing of HPV was performed by automated DNA sequencing. Cellular markers p53, Cyclin D1 and pRb were tested on all samples by immunohistochemistry (IHC), as well as p16 as a putative surrogate for the detection of HPV. RESULTS: HPV DNA was detected in 36/174 (~21%) samples: 36% of cancers from the oropharynx; 31% of oral cancers, and 22% from the larynx. HPV-16 was most common, being present in 33 samples, followed by HPV-33 (2 samples) and HPV-31 (1 sample). Twenty-eight out of 174 samples were positive for p16, predominantly in HPV-positive tissues (p < 0.001). No statistically significant association was observed between the cellular markers and HPV DNA positive cases. However, p16 positivity had excellent predictive value for the presence of HPV by PCR. CONCLUSION: There is a significant burden of HPV-associated HNSCC in Bangladesh, particularly in the oropharynx but also in oral and laryngeal cancers. Whilst a combination of PCR-based DNA detection and p16 IHC is useful, the latter has excellent specificity, acceptable sensitivity and good predictive value for carriage of HPV in this population and should be used for prognostic evaluation and treatment planning of all HNSCC patients in South Asia, as in the Western world.

Selective molecular annealing: in situ small angle X-ray scattering study of microwave-assisted annealing of block copolymers.

Microwave annealing has emerged as an alternative to traditional thermal annealing approaches for optimising block copolymer self-assembly. A novel sample environment enabling small angle X-ray scattering to be performed in situ during microwave annealing is demonstrated, which has enabled, for the first time, the direct study of the effects of microwave annealing upon the self-assembly behavior of a model, commercial triblock copolymer system [polystyrene-block-poly(ethylene-co-butylene)-block-polystyrene]. Results show that the block copolymer is a poor microwave absorber, resulting in no change in the block copolymer morphology upon application of microwave energy. The block copolymer species may only indirectly interact with the microwave energy when a small molecule microwave-interactive species [diethylene glycol dibenzoate (DEGDB)] is incorporated directly into the polymer matrix. Then significant morphological development is observed at DEGDB loadings ≥6 wt%. Through spatial localisation of the microwave-interactive species, we demonstrate targeted annealing of specific regions of a multi-component system, opening routes for the development of "smart" manufacturing methodologies.

Development of an optical microscopy system for automated bubble cloud analysis.

Recently, the number of uses of bubbles has begun to increase dramatically, with medicine, biofuel production, and wastewater treatment just some of the industries taking advantage of bubble properties, such as high mass transfer. As a result, more and more focus is being placed on the understanding and control of bubble formation processes and there are currently numerous techniques utilized to facilitate this understanding. Acoustic bubble sizing (ABS) and laser scattering techniques are able to provide information regarding bubble size and size distribution with minimal data processing, a major advantage over current optical-based direct imaging approaches. This paper demonstrates how direct bubble-imaging methods can be improved upon to yield high levels of automation and thus data comparable to ABS and laser scattering. We also discuss the added benefits of the direct imaging approaches and how it is possible to obtain considerable additional information above and beyond that which ABS and laser scattering can supply. This work could easily be exploited by both industrial-scale operations and small-scale laboratory studies, as this straightforward and cost-effective approach is highly transferrable and intuitive to use.

Development of an optical microscopy system for automated bubble cloud analysis: publisher's note.

This note reports changes to the author list and additional funding sources for [Appl. Opt.55, 6102 (2016)].APOPAI0003-693510.1364/AO.55.006102.

On the mechanisms of colloidal self-assembly during spin-coating.

Spin-coating offers a facile fabrication route for the production of high quality colloidal crystals, which have potential as photonic band-gap materials. This paper presents the results of direct observations of the self-assembly of latex colloids during spin-coating through the use of stroboscopic microscopy. We have been able to identify several mechanisms by which self-assembly occurs, depending upon the dispersion properties, such as particle weight fraction, solvent volatility and viscosity. Through the use of stroboscopic microscopy we have directly observed ordering occurring due to high concentrations of colloid particles (where volatility is relatively low), resulting in the formation of regular close packed ordered particle arrays. Conversely when the system in spun-cast from a much more volatile solvent, highly disordered non-equilibrium arrangements of particles form. When spin-coating a low concentration, low volatility dispersion, ordering is dominated by the occurrence of capillary drying fronts, which drag the particles into ordered arrangements. At a volatility intermediate to that of water and ethanol, ordering occurring predominantly via shear forces. Finally when the volatility is increased beyond the shear ordering regime, excessive shear leads to the occurrence of drying fronts within the system and so again, capillary forces induce a large degree of order within the final film.

Metagenomic analysis of sludge from full-scale anaerobic digesters operated in municipal wastewater treatment plants.

This study applied Illumina high-throughput sequencing to explore the microbial communities and functions in anaerobic digestion sludge (ADS) from two wastewater treatment plants based on a metagenomic view. Taxonomic analysis using SILVA SSU database indicated that Proteobacteria (9.52-13.50 %), Bacteroidetes (7.18 %-10.65 %) and Firmicutes (7.53 %-9.46 %) were the most abundant phyla in the ADS. Differences of microbial communities between the two types of ADS were identified. Genera of Methanosaeta and Methanosarcina were the major methanogens. Functional analysis by SEED subsystems showed that the basic metabolic functions of metagenomes in the four ADS samples had no significant difference among them, but they were different from other microbial communities from activated sludge, human faeces, ocean and soil. Abundances of genes in methanogenesis pathway were also quantified using a methanogenesis genes database extracted from KEGG. Results showed that acetotrophic was the major methanogenic pathway in the anaerobic sludge digestion.

The relationship between charge density and polyelectrolyte brush profile using simultaneous neutron reflectivity and in situ attenuated total internal reflection FTIR.

We report on a novel experimental study of a pH-responsive polyelectrolyte brush at the silicon/D2O interface. A poly[2-(diethylamino)ethyl methacrylate] brush was grown on a large silicon crystal which acted as both a substrate for a neutron reflectivity solid/liquid experiment but also as an FTIR-ATR spectroscopy crystal. This arrangement has allowed for both neutron reflectivities and FTIR spectroscopic information to be measured in parallel. The chosen polybase brush shows strong IR bands which can be assigned to the N-D(+) stretch, D2O, and a carbonyl group. From such FTIR data, we are able to closely monitor the degree of protonation along the polymer chain as well as revealing information concerning the D2O concentration at the interface. The neutron reflectivity data allows us to determine the physical brush profile normal to the solid/liquid interface along with the corresponding degree of hydration. This combined approach makes it possible to quantify the charge on a polymer brush alongside the morphology adopted by the polymer chains.

Prophylactic intranasal administration of lipid nanoparticle formulated siRNAs reduce SARS-CoV-2 and RSV lung infection.

RNA interference (RNAi) is an emerging and promising therapy for a wide range of respiratory viral infections. This highly specific suppression can be achieved by the introduction of short-interfering RNA (siRNA) into mammalian systems, resulting in the effective reduction of viral load. Unfortunately, this has been hindered by the lack of a good delivery system, especially via the intranasal (IN) route. Here, we have developed an IN siRNA encapsulated lipid nanoparticle (LNP) in vivo delivery system that is highly efficient at targeting severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and respiratory syncytial virus (RSV) lung infection in vivo. Importantly, IN siRNA delivery without the aid of LNPs abolishes anti-SARS-CoV-2 activity in vivo. Our approach using LNPs as the delivery vehicle overcomes the significant barriers seen with IN delivery of siRNA therapeutics and is a significant advancement in our ability to delivery siRNAs. The study presented here demonstrates an attractive alternate delivery strategy for the prophylactic treatment of both future and emerging respiratory viral diseases.

Insights into the kinetics and self-assembly order of small-molecule organic semiconductor/quantum dot blends during blade coating.

Organic-inorganic nanocomposite films formed from blends of small-molecule organic semiconductors and colloidal quantum dots are attractive candidates for high efficiency, low-cost solar energy harvesting devices. Understanding and controlling the self-assembly of the resulting organic-inorganic nanocomposite films is crucial in optimising device performance, not only at a lab-scale but for large-scale, high-throughput printing and coating methods. Here, in situ grazing incidence X-ray scattering (GIXS) gives direct insights into how small-molecule organic semiconductors and colloidal quantum dots self-assemble during blade coating. Results show that for two blends separated only by a small difference in the structure of the small molecule forming the organic phase, crystallisation may proceed down two distinct routes. It either occurs spontaneously or is mediated by the formation of quantum dot aggregates. Irrespective of the initial crystallisation route, the small-molecule crystallisation acts to exclude the quantum dot inclusions from the growing crystalline matrix phase. These results provide important fundamental understanding of structure formation in nanocomposite films of organic small molecules and colloidal quantum dots prepared via solution processing routes. It highlights the fundamental difference to structural evolution which can be made by seemingly small changes in system composition. It provides routes for the structural design and optimisation of solution-processed nanocomposites that are compatible with the large-scale deposition manufacturing techniques that are crucial in driving their wider adoption in energy harvesting applications.

Pilot scale evaluation of SANI process for sludge minimization and greenhouse gas reduction in saline sewage treatment.

This study reports on a pilot trial of the SANI process (Sulfate reduction, Autotrophic denitrification and Nitrification Integrated process) in Hong Kong. A pilot-scale SANI plant treating saline sewage at 10 m3/day was scaled-up from a lab-scale system treating synthetic saline sewage. The plant consisted of a sulfate reduction up-flow sludge bed (SRUSB), an anoxic bioreactor (BAR1) for autotrophic denitrification utilizing dissolved sulfide produced by the SRUSB and an aerobic bioreactor (BAR2) for nitrification. The SANI pilot plant was successfully operated for 225 days and achieved average COD, TSS, TN removal of 87, 87, and 57%, respectively. The ratio of MLVSS to MLSS in the SRUSB was stable at 0.7 and the average sludge volume index (SVI) was constantly below 110 ml/g. No sludge was purposely withdrawn from the plant during 225-day plant operation. This was attributed to a very low observed sludge yield (0.02 kgVSS/kgCOD removed) of the SRUSB reactor. DNA extraction, PCA amplification results revealed that no methanogens were detected in the SRUSB. SANI can reduce 90% sludge production, 35% energy and 36% GHG compared to conventional biological nutrient removal (CBNR) process.

The influence of structure and morphology on ion permeation in commercial silicone hydrogel contact lenses.

The importance of the microstzructure of silicone hydrogels is widely appreciated but is poorly understood and minimally investigated. To ensure comfort and eye health, these materials must simultaneously exhibit both high oxygen and high water permeability. In contrast with most conventional hydrogels, the water content and water structuring within silicone hydrogels cannot be solely used to predict permeability. The materials achieve these opposing requirements based on a composite of nanoscale domains of oxygen-permeable (silicone) and water-permeable hydrophilic components. This study correlated characteristic ion permeation coefficients of a selection of commercially available silicone hydrogel contact lenses with their morphological structure and chemical composition. Differential scanning calorimetry measured the water structuring properties through subdivision of the freezing water component into polymer-associated water (loosely bound to the polymer matrix) and ice-like water (unimpeded with a melting point close to that of pure water). Small-angle x-ray scattering, and environmental scanning electron microscopy techniques were used to investigate the structural morphology of the materials over a range of length scales. Significant, and previously unrecognized, differences in morphology between individual materials at nanometer length scales were determined; this will aid the design and performance of the next generation of ocular biomaterials, capable of maintaining ocular homeostasis.