RESUMO
Invasive mammals are responsible for the majority of native species extinctions on islands. While most of these extinction events will be due to novel interactions between species (e.g. exotic predators and naive prey), it is more unusual to find incidences where a newly invasive species causes the decline/extinction of a native species on an island when they normally coexist elsewhere in their overlapping mainland ranges. We investigated if resource competition between two insectivorous small mammals was playing a significant role in the rapid replacement of the native pygmy shrew Sorex minutus in the presence of the recently invading greater white-toothed shrew Crocidura russula on the island of Ireland. We used DNA metabarcoding of gut contents from >300 individuals of both species to determine each species' diet and measured the body size (weight and length) during different stages of the invasion in Ireland (before, during and after the species come into contact with one another) and on a French island where both species have long coexisted (acting as a natural 'control' site). Dietary composition, niche width and overlap and body size were compared in these different stages. The body size of the invasive C. russula and composition of its diet changes between when it first invades an area and after it becomes established. During the initial stages of the invasion, individual shrews are larger and consume larger sized invertebrate prey species. During later stages of the invasion, C. russula switches to consuming smaller prey taxa that are more essential for the native species. As a result, the level of interspecific dietary overlap increases from between 11% and 14% when they first come into contact with each other to between 39% and 46% after the invasion. Here we show that an invasive species can quickly alter its dietary niche in a new environment, ultimately causing the replacement of a native species. In addition, the invasive shrew could also be potentially exhausting local resources of larger invertebrate species. These subsequent changes in terrestrial invertebrate communities could have severe impacts further downstream on ecosystem functioning and services.
Assuntos
Ecossistema , Musaranhos , Animais , Musaranhos/genética , Invertebrados , Espécies Introduzidas , Dieta/veterináriaRESUMO
PURPOSE: To compare the accuracy of post and cores created with three different fabricating techniques: direct conventional, machine milling, and three-dimensional (3D) printing. MATERIALS AND METHODS: Thirteen extracted single root central incisors were selected. Root canal treatment and tooth preparation for crown were performed on all teeth. Post space preparation of 11 mm was created using prefabricated fiber post drill to standardize post space width and length. Root canal impressions were performed on all teeth using polyvinyl siloxane impression material. Each impression was then three dimensionally scanned using an extraoral lab scanner. The scanned impressions were used to design digital files of post and cores with 3Shape CAD software. The digitally designed post and cores were used to fabricate 3D printed and milled post and core resin patterns. The same teeth were used to fabricate post and core with conventional technique (direct duplication of root canal with resin pattern). All posts were then scanned before being invested and then cast using base metal educational alloy. The metal post and cores were tried in with sample teeth and manually adjusted until found to be clinically acceptable. The post and cores were scanned in different stages to perform digital volume measurement using Geomagic Control software to determine accuracy. Pairwise comparisons were accomplished using exact version of the sign test (α = 0.05). RESULTS: These three techniques of post and core fabrication showed different results in the various stages of fabrication. The accuracy of 3D printed resin pattern (26.89 ±11.09 mm3 ) was found to be inferior compare to milled resin pattern (28.20 ±11.41 mm3 , p = 0.0002). However, dimensional stability of the 3D printed resin pattern before and after casting (0.56 ±0.95 mm3 ) was found to be superior to milled resin pattern (0.79 ±0.89 mm3 ) and direct resin pattern (2.51 ±1.38 mm3 , p = 0.00002). All three techniques showed significant volume reduction after adjustment (p = 0.0002). In the final stage, the adjusted metal post and core fabricated with three different techniques showed no statistical different in accuracy (p = 0.15). CONCLUSION: Digitally fabricated post and cores have the same degree of accuracy as those fabricated using the gold standard direct conventional post and core technique.
Assuntos
Técnica para Retentor Intrarradicular , Tecnologia Digital , Coroas , Materiais para Moldagem Odontológica , Tratamento do Canal Radicular , Desenho Assistido por ComputadorRESUMO
Understanding the frequency, spatiotemporal dynamics and impacts of parasite coinfections is fundamental to developing control measures and predicting disease impacts. The European turtle dove (Streptopelia turtur) is one of Europe's most threatened bird species. High prevalence of infection by the protozoan parasite Trichomonas gallinae has previously been identified, but the role of this and other coinfecting parasites in turtle dove declines remains unclear. Using a high-throughput sequencing approach, we identified seven strains of T. gallinae, including two novel strains, from ITS1/5.8S/ITS2 ribosomal sequences in turtle doves on breeding and wintering grounds, with further intrastrain variation and four novel subtypes revealed by the iron-hydrogenase gene. High spatiotemporal turnover was observed in T. gallinae strain composition, and infection was prevalent in all populations (89%-100%). Coinfection by multiple Trichomonas strains was rarer than expected (1% observed compared to 38.6% expected), suggesting either within-host competition, or high mortality of coinfected individuals. In contrast, coinfection by multiple haemosporidians was common (43%), as was coinfection by haemosporidians and T. gallinae (90%), with positive associations between strains of T. gallinae and Leucocytozoon suggesting a mechanism such as parasite-induced immune modulation. We found no evidence for negative associations between coinfections and host body condition. We suggest that longitudinal studies involving the recapture and investigation of infection status of individuals over their lifespan are crucial to understand the epidemiology of coinfections in natural populations.
Assuntos
Doenças das Aves , Coinfecção , Haemosporida , Parasitos , Trichomonas , Animais , Doenças das Aves/epidemiologia , Doenças das Aves/parasitologia , Coinfecção/veterinária , Columbidae/parasitologia , Trichomonas/genéticaRESUMO
The pink pigeon (Nesoenas mayeri) is an endemic species of Mauritius that has made a remarkable recovery after a severe population bottleneck in the 1970s to early 1990s. Prior to this bottleneck, an ex situ population was established from which captive-bred individuals were released into free-living subpopulations to increase population size and genetic variation. This conservation rescue led to rapid population recovery to 400-480 individuals, and the species was twice downlisted on the International Union for the Conservation of Nature (IUCN) Red List. We analyzed the impacts of the bottleneck and genetic rescue on neutral genetic variation during and after population recovery (1993-2008) with restriction site-associated sequencing, microsatellite analyses, and quantitative genetic analysis of studbook data of 1112 birds from zoos in Europe and the United States. We used computer simulations to study the predicted changes in genetic variation and population viability from the past into the future. Genetic variation declined rapidly, despite the population rebound, and the effective population size was approximately an order of magnitude smaller than census size. The species carried a high genetic load of circa 15 lethal equivalents for longevity. Our computer simulations predicted continued inbreeding will likely result in increased expression of deleterious mutations (i.e., a high realized load) and severe inbreeding depression. Without continued conservation actions, it is likely that the pink pigeon will go extinct in the wild within 100 years. Conservation rescue of the pink pigeon has been instrumental in the recovery of the free-living population. However, further genetic rescue with captive-bred birds from zoos is required to recover lost variation, reduce expression of harmful deleterious variation, and prevent extinction. The use of genomics and modeling data can inform IUCN assessments of the viability and extinction risk of species, and it helps in assessments of the conservation dependency of populations.
La paloma rosada (Nesoenas mayeri) es una especie endémica de Mauricio que se ha recuperado impresionantemente después de un grave cuello de botella poblacional a principios de la década de 1970 que duró hasta inicios de la década de 1990. Antes de este cuello de botella se había establecido una población ex situ de la cual se liberaban individuos reproducidos en cautiverio a las subpoblaciones en libertad para incrementar la variación genética y el tamaño poblacional. Este rescate de conservación derivó en una recuperación rápida de la población (400-480 individuos) y la especie cambió positivamente de categoría dos veces en la Lista Roja de la Unión Internacional para la Conservación de la Naturaleza (UICN). Analizamos los impactos del cuello de botella y el rescate genético sobre la variación genética neutral durante y después de la recuperación poblacional (de 1993 a 2008) mediante secuenciación RAD, análisis de microsatélites y análisis genéticos cuantitativos de los datos del libro genealógico de 1112 aves ubicadas en zoológicos de Europa y los Estados Unidos. Usamos simulaciones por computadora para estudiar los cambios pronosticados en la variación genética y en la viabilidad poblacional del pasado hacia el futuro. La variación genética declinó rápidamente, a pesar de la recuperación poblacional, y el tamaño efectivo de la población fue aproximadamente un orden de magnitud más pequeño que el tamaño del censo. La especie contó con una carga genética elevada de casi 15 equivalentes letales para la longevidad. Nuestras simulaciones pronostican que la endogamia continua probablemente resultará en un incremento en la expresión de mutaciones deletéreas (es decir, una carga realizada elevada) y en una depresión endogámica severa. Sin acciones continuas para la conservación, es probable que la paloma rosada esté extinta en vida libre dentro de cien años. El rescate de conservación de la paloma rosada ha sido fundamental en la recuperación de la población silvestre; sin embargo, se requiere de un rescate genético adicional con las aves de reproducción en cautiverio de los zoológicos para recuperar la variación perdida, reducir la expresión de la variación deletérea dañina y prevenir la extinción. El uso de la genómica y los datos modelados puede orientar las valoraciones de la UICN sobre la viabilidad y el riesgo de extinción de las especies, además de que ayuda en la evaluación de la dependencia que tienen las poblaciones de la conservación.
Assuntos
Aves , Conservação dos Recursos Naturais , Animais , Aves/genética , Espécies em Perigo de Extinção , Europa (Continente) , Variação Genética , Genômica , Densidade DemográficaRESUMO
BACKGROUND: Solitary bees, such as the red mason bee (Osmia bicornis), provide important ecosystem services including pollination. In the face of global declines of pollinator abundance, such haplodiploid Hymenopterans have a compounded extinction risk due to the potential for limited genetic diversity. In order to assess the genetic diversity of Osmia bicornis populations, we developed microsatellite markers and characterised them in two populations. METHODS AND RESULTS: Microsatellite sequences were mined from the recently published Osmia bicornis genome, which was assembled from DNA extracted from a single male bee originating from the United Kingdom. Sequences were identified that contained dinucleotide, trinucleotide, and tetranucleotide repeat regions. Seventeen polymorphic microsatellite markers were designed and tested, sixteen of which were developed into four multiplex PCR sets to facilitate cheap, fast and efficient genotyping and were characterised in unrelated females from Germany (n = 19) and England (n = 14). CONCLUSIONS: The microsatellite markers are highly informative, with a combined exclusion probability of 0.997 (first parent), which will enable studies of genetic structure and diversity to inform conservation efforts in this bee.
Assuntos
Abelhas/genética , Genoma de Inseto , Repetições de Microssatélites/genética , Polimorfismo Genético , Alelos , Animais , Ecossistema , Feminino , Frequência do Gene , Loci Gênicos , Genótipo , Técnicas de Genotipagem/métodos , Alemanha , Masculino , Reino UnidoRESUMO
PURPOSE: Traditional critical care dogma regarding the benefits of early tracheostomy during invasive ventilation has had to be revisited due to the risk of COVID-19 to patients and healthcare staff. Standard practises that have evolved to minimise the risks associated with tracheostomy must be comprehensively reviewed in light of the numerous potential episodes for aerosol generating procedures. We meet the urgent need for safe practise standards by presenting the experience of two major London teaching hospitals, and synthesise our findings into an evidence-based guideline for multidisciplinary care of the tracheostomy patient. METHODS: This is a narrative review presenting the extensive experience of over 120 patients with tracheostomy, with a pragmatic analysis of currently available evidence for safe tracheostomy care in COVID-19 patients. RESULTS: Tracheostomy care involves many potentially aerosol generating procedures which may pose a risk of viral transmission to staff and patients. We make a series of recommendations to ameliorate this risk through infection control strategies, equipment modification, and individualised decannulation protocols. In addition, we discuss the multidisciplinary collaboration that is absolutely fundamental to safe and effective practise. CONCLUSION: COVID-19 requires a radical rethink of many tenets of tracheostomy care, and controversy continues to exist regarding the optimal techniques to minimise risk to patients and healthcare workers. Safe practise requires a coordinated multidisciplinary team approach to infection control, weaning and decannulation, with integrated processes for continuous prospective data collection and audit.
Assuntos
COVID-19 , Traqueostomia , Humanos , Londres , Pandemias , Guias de Prática Clínica como Assunto , Estudos Prospectivos , SARS-CoV-2 , Traqueostomia/efeitos adversosRESUMO
PURPOSE: The COVID-19 pandemic placed an unprecedented demand on critical care services for the provision of mechanical ventilation. Tracheostomy formation facilitates liberation from mechanical ventilation with advantages for both the patient and wider critical care resource, and can be performed using both percutaneous dilatational and surgical techniques. We compared outcomes in those patients undergoing percutaneous dilatational tracheostomy to those undergoing surgical tracheostomy and make recommendations for provision of tracheostomy services in any future surge. METHODS: Multicentre multidisciplinary retrospective observational cohort study including 201 patients with COVID-19 pneumonitis admitted to an ICU in one of five NHS Trusts within the South London Adult Critical Care Network who required mechanical ventilation and subsequent tracheostomy. RESULTS: Percutaneous dilatational tracheostomy was performed in 124 (62%) of patients, and surgical tracheostomy in 77 (38%) of patients. There was no difference between percutaneous dilatational tracheostomy and surgical tracheostomy in either the rate of peri-operative complications (16.9 vs. 22.1%, p = 0.46), median [IQR(range)] time to decannulation [19.0 (15.0-30.2 (5.0-65.0)] vs. 21.0 [15.5-36.0 (5.0-70.0) days] or mortality (13.7% vs. 15.6%, p = 0.84). Of the 172 patients that were alive at follow-up, two remained ventilated and 163 were decannulated. CONCLUSION: In patients with COVID-19 pneumonitis that require tracheostomy to facilitate weaning from mechanical ventilation, there was no difference in outcomes between those patients that had percutaneous dilatational tracheostomy compared with those that had surgical tracheostomy. Planning for future surges in COVID-19-related critical care demands should utilise all available resource and expertise.
Assuntos
COVID-19 , Traqueostomia , Adulto , Humanos , Londres , Pandemias , Respiração Artificial , Estudos Retrospectivos , SARS-CoV-2RESUMO
STATEMENT OF PROBLEM: Strengthening mechanisms of zirconia ceramics stabilized with 3 mol% yttria (3Y-TZP) are complex and dictated by the crystalline phase assemblage. Although their clinical performance for dental restorations has been excellent, there is evidence that framework fractures do occur and have been underreported. Meanwhile, the relationship between phase assemblage and reliability of 3Y-TZP is not properly understood. PURPOSE: The purpose of this in vitro study was to elucidate the relationship between crystalline phase assemblage and the reliability of 3Y-TZP and to calculate the associated probabilities of survival. MATERIAL AND METHODS: Disks of 3Y-TZP were prepared from cylindrical blanks and randomly assigned to 12 experimental groups (n=20 per group). Different crystalline phase assemblages were produced by either varying the sintering temperature from 1350 °C to 1600 °C and/or treating the surface by airborne-particle abrasion with 50-mm alumina particles at a pressure of 0.2 MPa for 1 minute with or without subsequent heat treatment. Crystalline phases were analyzed by standard and grazing incidence X-ray diffraction (GIXRD). The relationship between phase assemblage and reliability was determined by measuring the biaxial flexural strength (BFS) according to ISO standard 6872 and by using Weibull statistics to calculate the Weibull modulus (m), probability of survival, and maximum allowable stresses. XRD results were analyzed by ANOVA to detect statistically significant differences between groups. Adjustment for all pairwise group comparisons was made using the Tukey method (α=.05). RESULTS: Standard incidence XRD confirmed the presence of a small amount of cubic phase after sintering at 1350 °C. A cubic-derived nontransformable tetragonal t'-phase was observed at sintering temperatures of 1450 °C and above, the amount of which increased linearly. GIXRD revealed that airborne-particle abraded groups sintered at 1350 °C and 1600 °C had the highest variability in monoclinic phase fraction as a function of depth. These groups were also associated with the lowest reliability. Groups as-sintered at 1350 °C and 1600 °C had the lowest modulus (m=8.1 [0.5] and 7.0 [0.8], respectively) and probability of survival (Ps) for a maximum allowable stress of 700 MPa, while treated groups sintered at 1450 °C and 1550 °C were associated with the highest modulus (from 15.0 [1.4] to 20.9 [1.4]) and Ps (≥0.9999). The lower strength and reliability of groups sintered at 1600 °C was consistent with the presence of a significant amount of nontransformable t'-phase. The pattern of BFS results indicated that ferro-elastic domain switching was a dominant strengthening mechanism in 3Y-TZP. CONCLUSIONS: The present study first reported on the detrimental effect of the cubic-derived nontransformable t'-phase on the mechanical properties of 3Y-TZP. It was demonstrated that phase assemblage determined reliability and was directly linked to the probability of survival.
Assuntos
Materiais Dentários , Ítrio , Cerâmica , Teste de Materiais , Reprodutibilidade dos Testes , Propriedades de Superfície , ZircônioRESUMO
Exposure of male fish to estrogenic substances from wastewater treatment works (WwTWs) results in feminization and reduced reproductive fitness. Nevertheless, self-sustaining populations of roach (Rutilus rutilus) inhabit river stretches polluted with estrogenic WwTW effluents. In this study, we examine whether such roach populations have evolved adaptations to tolerate estrogenic pollution by comparing frequency differences in single-nucleotide polymorphisms (SNPs) between populations sampled from rivers receiving either high- or low-level WwTW discharges. SNPs within 36 "candidate" genes, selected for their involvement in estrogenic responses, and 120 SNPs in reference genes were genotyped in 465 roaches. There was no evidence for selection in highly estrogen-dependent candidate genes, including those for the estrogen receptors, aromatases, and vitellogenins. The androgen receptor (ar) and cytochrome P450 1A genes were associated with large shifts in allele frequencies between catchments and in individual populations, but there is no clear link to estrogen pollution. Selection at ar in the effluent-dominated River Lee may have resulted from historical contamination with endocrine-disrupting pesticides. Critically, although our results suggest population-specific selection including at genes related to endocrine disruption, there was no strong evidence that the selection resulted from exposure to estrogen pollution.
Assuntos
Cyprinidae , Poluentes Químicos da Água , Animais , Cyprinidae/genética , Estrogênios , Estrona , Humanos , Masculino , Rios , Vitelogeninas , Poluentes Químicos da Água/análiseRESUMO
Invasive species can have wide-ranging negative impacts, and an understanding of the process and success of invasions can be vital to determine management strategies, mitigate impacts and predict range expansions of such species. Monk parakeets (Myiopsitta monachus) and ring-necked parakeets (Psittacula krameri) are both widespread invasive species, but there has been little research into the genetic and social structure of these two species despite the potential links with invasion success. The aim of this study was to isolate novel microsatellite loci from the monk parakeet and characterise them in both monk and ring-necked parakeets in order to facilitate future investigations into their behaviour and population ecology. Sex-typing markers were also tested in both species. Of the 20 microsatellite loci assessed in 24 unrelated monk parakeets, 16 successfully amplified and were polymorphic displaying between 2 and 14 alleles (mean = 8.06). Expected heterozygosity ranged from 0.43 to 0.93 and observed heterozygosity ranged from 0.23 to 0.96. Nine of the 20 loci also successfully amplified and were polymorphic in the ring-necked parakeet, displaying between 2 and 10 alleles. Suitable markers to sex both species and a Z-linked microsatellite locus were identified. A multiplex marker set was validated for monk parakeets. These novel microsatellite loci will facilitate fine and broad-scale population genetic analyses of these two widespread invasive species.
Assuntos
Espécies Introduzidas , Repetições de Microssatélites/genética , Periquitos/genética , Análise para Determinação do Sexo , Animais , Feminino , Loci Gênicos , Masculino , Especificidade da EspécieRESUMO
OBJECTIVE: To compare the color of double-layered (DL) resin-composite (RC) samples with variant enamel-thicknesses (ET) to their corresponding shade-tabs from VITA classical (VC) and 3D-Master (V3DM). METHODS: A2-DL samples (N = 30) fabricated using three pairs of custom-made molds with an ET of 0.5, 0.7, and 1.0 mm. Shades were selected according to the manufacturer's instructions of two RC brands: Clearfil-Majesty (CM), and Vita-l-essence (VL). A spectrophotometer measured CIE L*a*b* color parameters. We used ΔE 00 to calculate color differences among DL samples, VC, and V3DM shade-tabs. The data were analyzed using Spearman correlation coefficient, one-way ANOVA, and Tukey test (â=0.05). RESULTS: ΔE 00 between DL samples A2 and 2M2 shade tabs were all greater than the predetermined 50:50% acceptability threshold (ΔE 00 = 6.6-10.4). Depending on the shade tabs compared, the ΔE 00 among CM and VL ET subgroups were statistically different (P < .001). ET and L* were negatively correlated for CM and VL. For CM, ΔE 00 and L* correlated on the A2 shade tab, whereas for VL, ΔE 00 , and ET correlated on the 2M2 shade tab (P < .05). CONCLUSIONS: The DL samples produced unacceptable color matches to their corresponding shade. An enamel layer thickness of 0.7 mm corresponded to the lowest ΔE 00 . The use of V3DM for RC shade selection should be investigated. CLINICAL SIGNIFICANCE: Understanding color interaction between RC layers is important to achieve consistent results in esthetic clinical procedures. The thickness of the enamel layer can critically alter the overall shade for a given RC shade and brand. This variation is difficult for the clinician to predict and negatively impacts patient satisfaction, increasing overall procedure costs, and decreasing efficiency. This color interaction study aims to facilitate consistency in shade reproduction.
Assuntos
Planejamento de Prótese Dentária , Pigmentação em Prótese , Cor , Colorimetria , Esmalte Dentário , Humanos , EspectrofotometriaRESUMO
PURPOSE: To evaluate the accuracy of implant position using surgical guides fabricated by additive and subtractive techniques. MATERIALS AND METHODS: A partially edentulous standardized mandibular implant model with different bone densities and soft tissue was duplicated and a diagnostic wax-up was performed for the #30 area. A reference radiographic guide was fabricated and cone beam computed tomography (CBCT) was made with the reference radiographic guide in place. A surgical guide was designed using BlueSky Plan 4 software and a reference implant was placed in the #30 region. The STL file of the surgical guide was exported and specimens (n = 15) were fabricated by two different techniques: additive (3D printing) and subtractive (milling). The standardized mandibular model was surface-scanned and duplicated with printed dental model resin (n = 30). Each surgical guide was used to place an implant in thirty duplicate printed models. Differences in implant position as compared to the reference were measured from digital scans with scan bodies in place. The angular deviations, differences in depth, coronal and apical deviations were measured using GeoMagic Control X software. Results were analyzed by Wilcoxon-Mann-Whitney test and PERMANOVA (Permutational Multivariate Analysis of Variance). Intraclass correlation was used to assess measurement reproducibility with Bonferroni adjustment for multiple testing as needed (α = 0.05). RESULTS: There were no significant differences in accuracy of implant placement using guides fabricated using additive vs subtractive techniques. The mean angular deviations between the reference and actual position of implant in mesio-distal cross-section were 0.780 ± 0.80° for printed group and 0.77 ± 0.72° for the milled group. The differences in bucco-lingual cross-section were 1.60 ± 1.22° in in printed group and 1.77 ± 0.76° in the milled group. The differences in depth (mm) were measured at the top of the scan body at four locations: mesial, distal, buccal and lingual. The mean differences in depth for the group that used printed surgical guides were (mesial) 0.37 ± 0.29 mm, (distal) 0.32 ± 0.23 mm, (buccal) 0.24 ± 0.23 mm, and (lingual) 0.25 ± 0.17 mm. The mean differences in depth for the group that used milled surgical guides were (mesial) 0.51 ± 0.33 mm, (distal) 0.40 ± 0.32 mm, (buccal) 0.22 ± 0.23 mm, and (lingual) 0.23 ± 0.12 mm in those four aspects, respectively. The mean coronal deviation showed 0.32 mm in the printed group and 0.27 mm in the milled group. For the apical deviation, the results of this study showed mean apical deviation 0.84 mm in the printed group and 0.80 mm in the milled group. CONCLUSIONS: Results indicate that 3D-printed surgical guides are statistically as accurate as milled guides for guided-implant surgery with the benefits of high accuracy, ease of fabrication, less waste compared to subtractive techniques, and reduction of laboratory time thereby increasing cost-effectiveness.
Assuntos
Implantes Dentários , Cirurgia Assistida por Computador , Desenho Assistido por Computador , Tomografia Computadorizada de Feixe Cônico , Implantação Dentária Endóssea , Imageamento Tridimensional , Reprodutibilidade dos TestesRESUMO
Wnt proteins regulate diverse biological responses by initiating two general outcomes: ß-catenin-dependent transcription and ß-catenin-independent activation of signaling cascades, the latter including modulation of calcium and regulation of cytoskeletal dynamics (Planar Cell Polarity, PCP). It has been difficult to elucidate the mechanisms by which Wnt signals are directed to effect one or the other outcome due to shared signaling proteins between the ß-catenin-dependent and -independent pathways, such as the Dishevelled binding protein Naked. While all Naked paralogs contain a putative calcium-binding domain, the EF-Hand, Drosophila Naked does not bind calcium. Here we find a lineage-specific evolutionary change within the Drosophila Naked EF-hand that is not shared with other insects or vertebrates. We demonstrate the necessary role of the EF-hand for Nkd localization changes in calcium fluxing cells and using in vivo assays, we identify a role for the zebrafish Naked EF-hand in PCP but not in ß-catenin antagonism. In contrast, Drosophila-like Nkd does not function in PCP, but is a robust antagonist of Wnt/ß-catenin signaling. This work reveals that the zebrafish Nkd1 EF-hand is essential to balance Wnt signaling inputs and modulate the appropriate outputs, while the Drosophila-like EF-Hand primarily functions in ß-catenin signaling.
Assuntos
Sinalização do Cálcio/fisiologia , Cálcio/metabolismo , Proteínas de Transporte/metabolismo , Via de Sinalização Wnt/fisiologia , Proteínas de Peixe-Zebra/metabolismo , Peixe-Zebra/metabolismo , Animais , Proteínas de Transporte/genética , Peixe-Zebra/genética , Proteínas de Peixe-Zebra/genéticaRESUMO
Plant-herbivore interactions provide critical insights into the mechanisms that govern the spatiotemporal distributions of organisms. These interactions are crucial to understanding the impacts of climate change, which are likely to have an effect on the population dynamics of alpine herbivores. The Royle's pika (Ochotona roylei, hereafter pika) is a lagomorph found in the western Himalaya and is dependent on alpine plants that are at risk from climate change. As the main prey of many carnivores in the region, the pika plays a crucial role in trophic interactions. We examined topographical features, plant genera presence and seasonal dynamics as drivers of the plant richness in the pika's diet across an elevational gradient (2,600-4,450 m). We identified 79 plant genera in the faecal pellets of pikas, of which 89% were forbs, >60% were endemic to the Himalaya, and 97.5% of the diet plant genera identified followed the C3 photosynthetic pathway. We found that, during the premonsoon season, the number of genera in the pika's diet decreased with increasing elevation. We demonstrate that a large area of talus supports greater plant diversity and, not surprisingly, results in higher species richness in the pika's diet. However, in talus habitat with deep crevices, pikas consumed fewer plant genera suggesting they may be foraging suboptimally due to predation risk. The continued increase in global temperature is expected to have an effect on the distribution dynamics of C3 plants and consequently influence pika diet and distribution, resulting in a significant negative cascading effect on the Himalayan ecosystem.
Assuntos
Ecossistema , Cadeia Alimentar , Lagomorpha/fisiologia , Plantas/química , Altitude , Animais , Biodiversidade , Carnivoridade , Mudança Climática , Dieta , Fezes/química , Herbivoria/fisiologia , Mamíferos , Plantas/classificação , Plantas/genética , Estações do Ano , TemperaturaRESUMO
PURPOSE: To compare the use of virtual 3D casts as an alternative to paper-based exercises in preclinical removable partial denture (RPD) design in terms of student outcomes (as evidenced by exercise evaluation scores), as well as student attitudes related to the 2 formats. The first hypothesis of this study is that virtual 3D digital models in the exercise will result in better student outcomes as evidenced by the final exercise score compared to the 2D drawings. The second hypothesis is that virtual 3D digital models in the exercise will result in greater student acceptance compared to the 2D drawings. MATERIALS AND METHODS: Students were divided into 2 equal, randomly assigned groups Both groups were made to solve 2 exercises: a class II exercise and a class IV exercise. Group 1 received the first exercise (exercise #1) as a Kennedy class IV design exercise in virtual 3D and the second exercise (exercise #2) as a Kennedy class II design exercise in traditional format. Group 2 would receive the opposite exercise #1 as a Kennedy class IV in traditional format and exercise #2 as a Kennedy class II in virtual 3D format. Virtual 3D casts were made to be identical to the traditional exercises. Students were then asked to complete a short survey to assess their preferences. The Wilcoxon Rank Sum test was used to compare the distribution of scores of exercises using the virtual 3D format with the scores when students used the traditional 2D format. Preference comparisons for the 2 formats were accomplished using exact binomial tests. RESULTS: There was no difference in learning outcomes based on the distribution of student scores for either exercise independent of presentation format (p > 0.52). There was also no difference in individual student score between 2 identical exercises, independent of whether the exercise was using 3D virtual models or 2D drawings. A greater proportion of students agreed with the statements that favored the use of the virtual 3D models than disagreed with respect to all 7 questions asked, based upon the sign test (comparing agreement vs. disagreement with the statement, p < 0.0003 in all instances). CONCLUSION: Despite there being no difference in learning outcomes (final scores), the students showed an overwhelming preference in having the virtual 3D casts part as part of the curriculum.
Assuntos
Prótese Parcial Removível , Currículo , Avaliação Educacional , Humanos , Aprendizagem , Estudantes , Inquéritos e QuestionáriosRESUMO
PURPOSE: Chairside surface adjustments of zirconia dental restorations enhance the toughening stress-induced tetragonal-to-monoclinic phase transformation and domain reorientation by ferro-elastic domain switching (FDS), but also trigger subsurface damage, which could compromise long-term clinical performance. The purpose of this study was to assess the depth of phase transformation, associated FDS, and flexural strength of dental zirconia (BruxZir HT 2.0), after chairside surface treatments. MATERIALS AND METHODS: Square specimens were sectioned from CAD/CAM blocks and sintered according to manufacturer's recommendations (n = 30). They were left as-sintered (AS; control), air abraded with fine (AAF) or coarse (AAC) alumina particles, ground (G) or ground and polished (GP). Roughness was measured by profilometry. Crystalline phases were investigated by grazing incidence X-ray diffraction (GIXRD) (n = 3). GIXRD data were fit using semi-log regression protocols to assess transformation depth and extent of FDS. The mean biaxial flexural strength was measured according to ISO 6872. Subsurface damage was assessed from SEM images using a bonded polished interface configuration. Flaw distribution was assessed by Weibull analysis. Results were analyzed by Kruskal-Wallis with Tukey's adjustment for multiple comparisons (p < 0.05). RESULTS: Air-abraded and ground groups exhibited higher mean surface roughness than control. AAF group exhibited the highest flexural strength (1662.6 ± 202.6 MPa) with flaw size (5.9 ± 1.8 µm) smaller than transformation (14.5 ± 1.2 µm) or FDS depth (19.3 ± 1.1 µm), followed by GP group (1567.2 ± 209.7 MPa) with smallest FDS depth (9.3 ± 2.0 µm) and flaw size (2.6 ± 1.8 µm), but without m-phase. AAC group (1371.4 ± 147.6 MPa) had the largest flaw size (40.3 ± 20.3 µm), transformation depth (47.2 ± 3.0 µm) and FDS depth (41.2 ± 2.2 µm). G group (1357.0 ± 196.7 MPa) had the smallest transformation depth (8.6 ± 1.5 µm), and mean FDS depth (19.8 ± 3.7 µm) and flaw size (18.6 ± 3.1 µm). AAC and AAF exhibited the highest Weibull modulus (11.2 ± 0.4 and 9.8 ± 0.3 µm, respectively). CONCLUSIONS: Variations in mean biaxial flexural strength were explained by the balance between the depth of toughening mechanisms (phase transformation and FDS) and subsurface damage. AAF and GP groups were the most efficient surface adjustments in promoting the highest mean biaxial flexural strength.
Assuntos
Cerâmica , Materiais Dentários , Zircônio , Desenho Assistido por Computador , Polimento Dentário , Restauração Dentária Permanente/métodos , Planejamento de Dentadura , Resistência à Flexão , Humanos , Propriedades de SuperfícieRESUMO
PURPOSE: To investigate the relationships between gender, age, patients' perceptions about the dentists' conduct, number of adjustments, treatment type, and expectation prior to prosthetic treatment and patient satisfaction with their treatments. MATERIALS AND METHODS: Data were integrated from four studies that measured patient expectations before treatment and satisfaction after treatment using a visual analog scale (VAS) from 0 to 10. These scores were given for each of four aspects of the therapeutic outcomes: chewing, esthetics, phonetics, and comfort. Patients' perceptions about the dentists' conduct was also assessed using a Likert-scale questionnaire. The total sample size, after combining the data from all four studies, was 223 subjects. Bivariate and multivariable analyses were performed. The covariates entertained were gender, age, treatment type, patients' perceptions about the dentists' conduct, number of adjustments, and expectation prior to denture fabrication. RESULTS: In the entire sample, 115 (51.57%) patients were females and 108 (48.43%) were males. They ranged in age from 28 to 81 years old; the mean age was 53.2 years (SD = 11.5). Combining four treatments together, there was no significant difference between patients' expectation and satisfaction scores for all four items. There were no significant differences between expectation and satisfaction for different genders. Multivariable analysis showed that patient expectation, satisfaction and the difference (satisfaction score-expectation score) scores for all four aspects were associated with treatment type (implant treatments were favored), and expectation prior to prosthetic treatment (the higher the expectation, the higher the satisfaction) was associated with satisfaction and difference scores. Satisfaction and difference scores for chewing were associated with number of adjustments and satisfaction, and satisfaction and difference scores for phonetics and comfort were associated with how well the dentist explained the intended treatment before performing it. CONCLUSIONS: Patient satisfaction was associated with treatment type (implant treatments were favored), expectations prior to prosthetic treatment (the higher the expectation, the higher the satisfaction), and how well the dentist explained the intended treatment before performing it.
Assuntos
Motivação , Satisfação Pessoal , Adulto , Idoso , Idoso de 80 Anos ou mais , Estética Dentária , Feminino , Humanos , Masculino , Mastigação , Pessoa de Meia-Idade , Satisfação do Paciente , Inquéritos e QuestionáriosRESUMO
Epilepsy, which affects â¼1% of the population, is caused by abnormal synchronous neural activity in the central nervous system (CNS). While there is a significant genetic contribution to epilepsy, the underlying causes for the majority of genetic cases remain unknown. The NIH Undiagnosed Diseases Project (UDP) utilized exome sequencing to identify genetic variants in patients affected by various conditions with undefined etiology, including epilepsy. Confirming the functional relevance of the candidate genes identified by exome sequencing in a timely manner is crucial to translating exome data into clinically useful information. To this end, we developed a high throughput version of a seizure-sensitivity assay in zebrafish (Danio rerio) to rapidly evaluate candidate genes found by exome sequencing. We developed open access software, Studying Epilepsy In Zebrafish using R (SEIZR), to efficiently analyze the data. SEIZR was validated by disrupting function of a known epilepsy gene, prickle 1. Next, using SEIZR, we analyzed a candidate gene from the UDP screen (Zinc Finger Homeobox 3, ZFHX3), and showed that reduced ZFHX3 function in zebrafish results in a significant hyperactive response to the convulsant drug pentylenetetrazol (PTZ). We find that ZFHX3 shows strong expression in the CNS during neurogenesis including in the pallium, thalamus, tegmentum, reticular formation, and medulla oblongata - all regions which have roles in motor control and coordination. Our findings in the zebrafish confirm human ZFHX3 is a strong candidate for further neurological studies. We offer SEIZR to other researchers as a tool to rapidly and efficiently analyze large behavioral data sets.
Assuntos
Epilepsia/genética , Ensaios de Triagem em Larga Escala/métodos , Proteínas de Homeodomínio/genética , Convulsões/genética , Proteínas de Peixe-Zebra/genética , Animais , Comportamento Animal/efeitos dos fármacos , Comportamento Animal/fisiologia , Convulsivantes/farmacologia , Técnicas de Silenciamento de Genes , Pentilenotetrazol/farmacologia , Software , Peixe-ZebraRESUMO
Global-scale gene flow is an important concern in conservation biology as it has the potential to either increase or decrease genetic diversity in species and populations. Although many studies focus on the gene flow between different populations of a single species, the potential for gene flow and introgression between species is understudied, particularly in seabirds. The only well-studied example of a mixed-species, hybridizing population of petrels exists on Round Island, in the Indian Ocean. Previous research assumed that Round Island represents a point of secondary contact between Atlantic (Pterodroma arminjoniana) and Pacific species (Pterodroma neglecta and Pterodroma heraldica). This study uses microsatellite genotyping and tracking data to address the possibility of between-species hybridization occurring outside the Indian Ocean. Dispersal and gene flow spanning three oceans were demonstrated between the species in this complex. Analysis of migration rates estimated using bayesass revealed unidirectional movement of petrels from the Atlantic and Pacific into the Indian Ocean. Conversely, structure analysis revealed gene flow between species of the Atlantic and Pacific oceans, with potential three-way hybrids occurring outside the Indian Ocean. Additionally, geolocation tracking of Round Island petrels revealed two individuals travelling to the Atlantic and Pacific. These results suggest that interspecific hybrids in Pterodroma petrels are more common than was previously assumed. This study is the first of its kind to investigate gene flow between populations of closely related Procellariiform species on a global scale, demonstrating the need for consideration of widespread migration and hybridization in the conservation of threatened seabirds.
Assuntos
Aves/classificação , Fluxo Gênico , Variação Genética , Genética Populacional , Hibridização Genética , Migração Animal , Animais , Oceano Atlântico , Genótipo , Oceano Índico , Repetições de Microssatélites , Modelos Genéticos , Oceano PacíficoRESUMO
Despite extensive habitat fragmentation, the Neotropical region possesses 30% of the world´s bird species. Microsatellites have remained one of the most popular genetic markers and have been used in ecological and conservation studies since the 1990's. We conducted a literature review comparing the number of papers published from January 1990 to July 2015 that used microsatellite markers for studies of wild birds in the Neotropical region, USA and some European countries. We assigned the articles to three categories of studies: population genetics, animal behavior/kinship analysis and the development of species-specific bird microsatellite markers. We also compared the studies in the Neotropics that used heterologous versus species-specific markers and provide a list of heterologous markers of utility in multiple birds. Despite the rich bird fauna in the Neotropics, the number of articles published represents only 5.6% of that published by the USA and selected European countries. Within the Neotropical region, Brazil possessed 60.5% of the total papers published, with the remaining 39.5% shared between five countries. We conclude that the lack of specialized laboratories and resources still represents a limit to microsatellite-based genetic studies of birds within the Neotropical region. To overcome these limitations, we suggest the use of heterologous microsatellite markers as a cost-effective and time-effective tool to assist ecological studies of wild birds.