Principle and antimicrobial efficacy of laser-activated irrigation: A narrative review.

In the last two decades, the activation of root canal irrigants with pulsed lasers as an adjunct in root canal treatment has become increasingly popular. This narrative review explains the physical basics and the working mechanism of laser-activated irrigation (LAI), explores the parameters influencing LAI efficacy, considers historical evolutions in the field and summarizes laboratory and clinical evidence with emphasis on the antimicrobial action of LAI. Cavitation is the driving force behind LAI, with growing and imploding vapour bubbles around the laser tip causing various secondary phenomena in the irrigant, leading to intense liquid dynamics throughout the underlying root canal. High-speed imaging research has shown that laser wavelength, pulse energy, pulse length and fibre tip geometry are parameters that influence this cavitation process. Nevertheless, this has not resulted in standardized settings for LAI. Consequently, there is significant variability in studies assessing LAI efficacy, complicating the synthesis of results. Laboratory studies in extracted teeth suggest that, with regard to canal disinfection, LAI is superior to conventional irrigation and there is a trend of higher antimicrobial efficacy of LAI compared to ultrasonic activation. Clinical evidence is limited to trials demonstrating similar postoperative pain levels after LAI versus no activation or ultrasonic activation. Clinical evidence concerning the effect of LAI on healing of apical periodontitis as yet is scarce.

A 22-year follow-up cross-sectional study on periapical health in relation to the quality of root canal treatment in a Belgian population.

AIM: To investigate the prevalence of apical periodontitis (AP) and the technical standard of root canal treatment in a Belgian population, assess the association of different variables with periapical status, and compare the results to a similar study conducted 22 years previously. METHODOLOGY: In this cross-sectional study, 614 panoramic radiographs of first-time adult attendees at the Dental School of the University Hospital of Ghent were examined. Recorded patient-level parameters included gender, age, number of teeth, number of root filled teeth, presence of any AP lesion, and number of implants. The following tooth-level data were collected: tooth presence, coronal status, quality of coronal restoration, post presence, type of root-filling material, length and density of root filling, root-end filling material, presence of AP, and adjacent implant. Multivariable multilevel binary logistic regression was used to explore the association between patient and tooth characteristics and AP prevalence. Risk differences and confidence intervals were calculated to compare the present with the previous study. RESULTS: The prevalence of AP at patient and tooth level was 46.9% and 5.6%, respectively. Fifty-one per cent of the 614 patients had at least one root filled tooth, and 5.9% of the 14 655 teeth studied were root filled. AP was found in 45% of root filled teeth. Fifty-four per cent of the root-filled teeth were rated as inadequate. Multivariable multilevel logistic regression revealed that more teeth, more implants, fewer root-filled teeth, adequate density, adequate coronal restoration, and no caries reduced the likelihood of AP. There were no statistically significant differences between the two studies regarding the prevalence of root-filled teeth or AP and the technical quality of root canal treatment. CONCLUSIONS: The prevalence of AP and the technical quality of root canal treatment in Belgium have not substantially changed over the last 22 years, despite the technological advancements and continuing education in the field.

Explaining the working mechanism of laser-activated irrigation and its action on microbial biofilms: A high-speed imaging study.

AIM: Laser-activated irrigation (LAI) using pulsed erbium lasers has been studied with regard to canal cleaning, but its working mechanism remains poorly understood. This study sought to unravel the method of action of LAI and to assess its effect on bacterial biofilms in a root canal model, by means of high-speed imaging. METHODOLOGY: A root canal model consisting of dentine and glass walls was used. Visualization of the canal space during activation was achieved with a high-speed camera, capturing 20-s activation series at 50 000 frames per second. Recordings were made of canal models filled with water, models filled with water containing glass microspheres, and models with a biofilm (an undefined biofilm originating from oral samples, a 1-week-old Enterococcus faecalis biofilm or a 11-day-old multispecies biofilm) grown on the dentine walls. LAI parameters were 2940 nm, 15 Hz, 50 µs, 20 mJ and 400 µm conical tip held at orifice level. Quantitative (measurement of size, life time and timing of cavitation bubbles; velocity and amplitude of root canal content movement) and qualitative (descriptive) analysis of the intracanal events was performed using imaging software. RESULTS: During the implosion of the primary bubble, smaller cavitation bubbles emerged throughout the entire canal. This process began in the coronal canal part and continued in the apical direction. Expansion of these bubbles was followed by an implosion, and this volumetric change over a time span of a few 100 µs resulted in a very rapid vertical movement of the canal content with a mean amplitude of 900 µm. The succession of these movements with every pulse, resulted in biofilm detachment from the root canal walls and the gradual displacement of fragments coronally, until their complete removal. The pattern of the biofilm removal was the same for all groups. LAI was able to remove biofilm from the root canal models. CONCLUSIONS: The hydrodynamic effect of LAI is based on the generation of small cavitation bubbles throughout the entire canal, far from the primary bubble. Their volumetric oscillation results in a small yet very fast vertical movement of the root canal content and local liquid streaming on each pulse, resulting in biofilm detachment and coronal displacement.

Model system parameters influence the sodium hypochlorite susceptibility of endodontic biofilms.

AIM: To evaluate in a laboratory setting the influence of several model system parameters on the sodium hypochlorite (NaOCl) susceptibility of endodontic biofilms. Based on these findings, a relevant in vitro endodontic biofilm model is proposed. METHODOLOGY: In vitro biofilms were cultured, varying the following experimental model parameters: biofilm composition (monospecies Enterococcus faecalis and a multispecies biofilm including E. faecalis, Fusobacterium nucleatum, Prevotella intermedia and Porphyromonas gingivalis), incubation time (24 h or 11 days), incubation atmosphere (aerobically or anaerobically) and biofilm substrate (polystyrene microtiter plate wells, hydroxyapatite or dentine). Biofilms were subjected to treatment with NaOCl (0.025%, 0.1%, 0.5%, 2.5%) for 1 min, control groups included treatment with purified water. Biofilms were harvested and the number of surviving cells was determined by plate counting using general (monospecies biofilms) or selective (multispecies biofilms) media. A two-way ANOVA was used to explore the effect of the model parameters on biofilm eradication. Finally, the most physiologically relevant biofilm model (11-day-old multispecies biofilm grown anaerobically on dentine discs) was characterized by selective media plate counting, NaOCl susceptibility testing, scanning and transmission electron microscopy. RESULTS: There was no difference in NaOCl eradication between the anaerobically and aerobically grown E. faecalis biofilms. One-day-old biofilms of E. faecalis were more susceptible to most tested NaOCl concentrations than 11-day-old biofilms (p < .05). When grown in a multispecies biofilm, E. faecalis was significantly less susceptible to NaOCl treatment than in a monospecies biofilm (p < .05). E. faecalis in a multispecies biofilm grown in a MTP was more susceptible to NaOCl (0.025% and 0.1%) than when grown on hydroxyapatite or dentine. No difference in biofilm NaOCl susceptibility was seen between hydroxyapatite and dentine. The multispecies biofilm proved to be a reproducible model with high NaOCl resistance, complex structure and organization. CONCLUSION: The parameters biofilm age, biofilm composition and substrate had a significant influence on the NaOCl susceptibility of E. faecalis biofilms. Older biofilms, multispecies biofilms and biofilms grown on dentine and hydroxyapatite had reduced NaOCl susceptibility. These findings emphasize the importance of selecting relevant parameters when designing a laboratory biofilm model system for the evaluation of antimicrobial treatments.

Efficacy of different irrigation technique in simulated curved root canals.

The aim of this study was to assess the influence of the canal curvature on the efficacy of sonically, ultrasonically, and laser-activated irrigation in removing a biofilm-mimicking hydrogel (BMH) from simulated canal irregularities. Transparent resin blocks containing a curved root canal (40° or 60°) were used as test models. A 4-mm groove at 1 mm from the apex was filled with BMH. Five different irrigation procedures were performed (n=20): needle irrigation (NI), EndoActivator (EA), Eddy, ultrasonically activated irrigation (UAI) (Irrisafe), and laser-activated irrigation (LAI) using a pulsed erbium laser (PIPS approach). All protocols were executed for 3×20s. Images of the groove were taken before and after irrigation, and the percentage BMH removal was calculated using image analysis software. In the 40° canal curvature model, the highest BMH removal was observed for UAI (99.9%), yielding a significantly better removal than that of EA (57.2%) and NI (53.8%), but not of LAI (96.8%) and Eddy (99.4%). In the 60° canal curvature model, UAI removed 99.5%, which resulted in significantly greater hydrogel removal than all other groups (P < 0.05). The difference between LAI (82.5%) and Eddy (78.1%) was not statistically significant, but both were more effective than EA (13.5%) and NI (7.3%). Canal curvature negatively affects the cleaning efficacy of different irrigation methods. The effect was most pronounced for the sonic techniques, while this was not the case for UAI. This could be ascribed to the prebent ultrasonic tip. Despite the position of the laser tip at the orifice level, fluid streaming during LAI resulted in substantial BMH removal beyond the curve.

Comparison of apical irrigant solution extrusion among conventional and laser-activated endodontic irrigation.

The aim of this study was to determine the amount of extruded endodontic irrigant among needle-syringe irrigation (NSI) and laser-activated irrigation (LAI) regimens. Twenty extracted maxillary central incisors were prepared utilizing GT professional rotary files (size 40, taper 0.06). Irrigation was performed with two 27 G irrigation needles (notched open ended (ON) and single side vented (SV)) each at two different irrigant volumetric flow rates (VFR)-0.05 ml/s (3 ml/min) and 0.10 ml/s (6 ml/min). LAI was performed with Er:YAG (erbium-doped yttrium aluminum garnet) using different fiber types (X-Pulse-14/400 cylindrical tip, Preciso- 14/300 flat cylindrical tip, PIPS- 14/400 quartz tapered tip). The Er:YAG laser with a wavelength of 2940 nm (Lightwalker AT, Fotona, Ljubljana, Slovenia) was used according to the following protocol: 10 mJ per pulse, 15 Hz, pulse duration 50 µs. Irrigation time was 60 s for all protocols. Precision syringe pump (PSP) maintained constant irrigant volumetric flow rate. Apically extruded irrigant was collected and net weighed for each protocol (N = 10). Data were analyzed by t tests and Kruskal-Wallis. All LAI regimens had statistically significant lower irrigant extrusion compared with NSI except for the SV 27 G needle used with 0.05 ml/s VFR when compared with the Preciso fiber tip (p = 0,230). The largest amount of extruded irrigant was with the ON 27 G needle at the 0.10 ml/s VFR, while the smallest was after LAI with PIPS fiber tip. The lower quantity of apically extruded irrigant during LAI (X-Pulse and PIPS) points out a safer endodontic irrigation method compared with conventional irrigations.

The efficacy of ultrasonic and PIPS (photon-induced acoustic streaming) irrigation to remove artificially placed dentine debris plugs out of an artificial and natural root model.

The aim was to validate an artificial resin 'root canal wall groove model' (RCWGM) mimicking the situation of natural roots with a groove of identical dimensions on debris removal out of these grooves, and to evaluate Erbium 'laser-activated irrigation' (LAI) with two conical tips at PIPS (photon-induced photoacoustic streaming) settings, with different activation times and different root canal positions on debris removal out of the grooves. A split RCWGM was used (resin blocks and roots of maxillary canines) with a canal size 40/0.06. The grooves in the apical third were filled with stained dentinal debris. Seventeen irrigation protocols (n = 20) were used: syringe-needle irrigation (3× 20 s), manual dynamic activation (1× 60 s), ultrasonically activated irrigation (UAI) with 25/25 Irrisafe (3× 20 s) and LAI (2940 nm Er:YAG) with X-Pulse or PIPS tips at PIPS settings (20 mJ, 50 µs, 20 Hz) and with the fibre (IN) or (OUT) the canal: IN during 1× 20 s, and OUT during 1× 20 s, 2× 20 s, 3× 20 s, 30 s, 2× 30 s and 1× 60 s. The quantity of remaining dentine debris in the groove was evaluated on a numerical scale. Statistical analysis was performed by means of proportional odds logistic regression, equivalence testing and Wald tests. The level of significance was set at 0.05. Resin models and the RCWGM with natural teeth can be called equivalent (log odds ratio 0.185). There were mostly no statistically significant differences for debris removal between UAI and LAI (p > 0.05) and between LAI with PIPS and X-Pulse (p > 0.05). Although not statistically different, the numbers of completely cleaned grooves were higher with LAI than with UAI for a 1-min activation, confirming findings from other studies. There is no difference in cleaning efficacy between X-Pulse and PIPS tips at PIPS settings.

How standard deviation contributes to the validity of a LDF signal: a cohort study of 8 years of dental trauma.

The aim of this cohort study was to document the potential of laser Doppler flowmetry (LDF) for diagnosing tooth vitality in traumatized teeth in a population of 88 referred patients with dental trauma over a period of 8 years (2011-2018). The main reason to refer was tooth discoloration (26%), and the main trauma cause was a traffic injury (35%). Taking into account that referral for LDF is best given within the week after trauma, 66% of referrals were overdue. In 73% of cases, root canal treatment could be avoided, and in 65%, the presence of a fixed orthodontic retainer showed beneficial for pulp recovery. Data of 394 teeth were collected and submitted to multilevel modelling statistics. As a general conclusion, both LDF perfusion and concentration values proved to be highly reliable in the appreciation of tooth vitality. The difference of variability of standard deviation and range of LDF measurements involving intra-subject control teeth showed statistically significant in discriminating between vital and non-vital pulps. In non-vital teeth, the diagnostic combination of LDF, sensibility tests and peri-apical X-ray is advised.

Diurnal variations and pulpal status: is there a need for FFT besides LDF?

The aim of this article was to investigate the use of laser Doppler flowmetry (LDF) combined with a fast Fourier transformation (FFT). LDF data in relation to three different scenarios were evaluated: (a) LDF records of a right central upper incisor of one patient were used for FFT analysis. These records were obtained by means of 30 pre-manufactured splints, handled by dentists without any experience in LDF recording. (b) Diurnal variations in one patient were analysed with LDF and FFT using 11 splints by one and same experienced investigator at four specific moments of the day. (c) Pulpal status was analysed using 17 splints. Eleven for a patient, standing as case model and six splints for six other patients. In this specific group, each patient had one vital and one non-vital central maxillary incisor and was analysed separately by LDF and FFT. The data of assessment (b) showed diurnal variations on LDF values of almost 80%, indicating that LDF registration is best performed in the same time period of the day. Data verification with FFT confirmed the findings without FFT of assessment (a) and (b). In assessment, (c) FFT demonstrated a clear distinction between a vital and a non-vital pulp for those cases with one vital tooth and one root canal treated tooth. In those cases with one vital incisor and the other traumatised, FFT was undeterminated. Considered that FFT was obtained after LDF recording and remained undeterminated for a decision in cases with decreasing pulpal blood flow in time, the added value of FFT in pulpal traumatology was minimal.

Influence of a calcium hydroxide-based intracanal dressing on the quality of the root canal filling assessed by capillary flow porometry.

OBJECTIVE: The objective of this study is to evaluate the influence of a calcium hydroxide intracanal dressing (CH) on the short- and long-term sealing ability of the root canal filling using capillary flow porometry (CFP). MATERIALS AND METHODS: To verify the repeatability of the method, five obturated specimens were submitted to CFP. Measurements were repeated three times and compared with the non-parametric Friedman test. Forty-five instrumented palatal roots were randomly divided into three groups. Group 1: specimens were obturated in one step without placement of any dressing. Group 2: CH was placed and removed after 1 week with syringe irrigation before obturation. Group 3: CH was placed and removed after 1 week with ultrasonic activation before obturation. CFP measurements were conducted at 1 week and 6 months after obturation. The inter-group comparisons were performed using the Kruskal-Wallis test and the intra-group comparison over time using the Wilcoxon signed-rank test. Significance level was set at 0.05. RESULTS: In the five specimens, no difference could be detected between the consecutive measurements for minimum, mean flow, and maximum pore diameter indicating repeatability of the method. No difference in sealing ability could be detected neither between the 3 groups at 1 week and at 6 months nor within each group between the 1 week and the 6 months measurements. CONCLUSIONS: Placement of a CH did not affect significantly the short- and long-term sealing ability of the root canal filling. CLINICAL RELEVANCE: The use of an intermediary CH does not negatively influence the quality of the root canal filling.

Laser Doppler flowmetry: reproducibility, reliability, and diurnal blood flow variations.

The aim of this investigation was (1) to evaluate the reliability of laser Doppler flowmetry (LDF) taking into consideration the use of a silicone splint and the inclination of the probe towards the buccal surface of a human tooth and (2) to determine whether diurnal variations of pulpal blood flow can be registered by means of LDF. Forty-one splints were made by one and the same principal investigator for the registration of pulpal blood flow in vivo in a maxillary right central incisor. Thirty dentists, without experience in LDF recording, were then asked to drill a right-angled shaft in a pre-manufactured splint with a referral point at 2 mm from the enamel-cement border central on the buccal surface of the right central upper incisor. The remaining 11 splints were handled by the principal investigator. The shafts in the 30 splints were analysed using Cone Beam CT imaging of the axial and sagittal angles and compared these to the 11 shafts prepared by the trained principal investigator. LDF was recorded for 90 s in each splint and statistically analysed. LDF values without the use of a splint were statistically significantly different (p < 0.05) and the variance was greater, indicating the superiority of splint use. Significant diurnal variations on LDF values were observed, indicating that special attention should be paid to registration during the day, especially when multiple measurements are to be compared.

Visualization of removal of trapped air from the apical region in simulated root canals by laser-activated irrigation using an Er,Cr:YSGG laser.

The aim of this visualization study was to obtain a better understanding of the mechanism by which trapped air is removed from the apical region of simulated root canals by activation of an irrigant using an erbium, chromium:yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser during endodontic procedures. A high-speed imaging system with high temporal and spatial resolution was used to visualize laser-induced shock waves in a resin block model with a curved root canal (inner diameter at the apex 0.08 mm, taper 4 %, crown height 10 mm, overall length 40 mm) and a glass cylinder model with a straight root canal (inner diameter 1 mm, crown height 10 mm, overall length 40 mm). The study utilized MZ3 and RFT3 tips in each model, without water or air spray, and with an average power of 1 W at 35 Hz. Laser-activated irrigation overcame the airlock effect by releasing air trapped in the air column. The mechanism underlying the removal of trapped air from the apical region using an Er,Cr:YSGG laser in a dry root canal is via the disruption of the surface tension at the solution-air interface. This disruption, caused by bubble implosion (cavitation), displaces air in the form of bubbles from the apical region toward the solution, which allows the solution to travel apically.

Efficacy of laser-based irrigant activation methods in removing debris from simulated root canal irregularities.

In root canal therapy, irrigating solutions are essential to assist in debridement and disinfection, but their spread and action is often restricted by canal anatomy. Hence, activation of irrigants is suggested to improve their distribution in the canal system, increasing irrigation effectiveness. Activation can be done with lasers, termed laser-activated irrigation (LAI). The purpose of this in vitro study was to compare the efficacy of different irrigant activation methods in removing debris from simulated root canal irregularities. Twenty-five straight human canine roots were embedded in resin, split, and their canals prepared to a standardized shape. A groove was cut in the wall of each canal and filled with dentin debris. Canals were filled with sodium hypochlorite and six irrigant activation procedures were tested: conventional needle irrigation (CI), manual-dynamic irrigation with a tapered gutta percha cone (manual-dynamic irrigation (MDI)), passive ultrasonic irrigation, LAI with 2,940-nm erbium-doped yttrium aluminum garnet (Er:YAG) laser with a plain fiber tip inside the canal (Er-flat), LAI with Er:YAG laser with a conical tip held at the canal entrance (Er-PIPS), and LAI with a 980-nm diode laser moving the fiber inside the canal (diode). The amount of remaining debris in the groove was scored and compared among the groups using non-parametric tests. Conventional irrigation removed significantly less debris than all other groups. The Er:YAG with plain fiber tip was more efficient than MDI, CI, diode, and Er:YAG laser with PIPS tip in removing debris from simulated root canal irregularities.

Measurement of pressure changes during laser-activated irrigant by an erbium, chromium: yttrium, scandium, gallium, garnet laser.

The use of Er,Cr:YSGG laser to activate irrigants results in the creation of vapour bubbles and shockwaves. The present study evaluated the magnitude of pressure changes in the root canal during laser-activated irrigation. The root canal of a single extracted maxillary canine was enlarged to a size 40/0.06 file. A pressure sensor was inserted apically into the root canal. The tooth was processed as follows. In the EDTA condition, the tooth was irrigated with 17 % EDTA; in the NaOCl condition, the tooth was irrigated with 3 % NaOCl. In all conditions, the irrigants were activated at 0.75 and 1.75 W for 60 s using RFT2 and MZ2 tips; to analyse the effect of tip placement, the tip was activated at the orifice and after inserting the tip 5 mm deeper than the orifice. Data showed no significant difference between irrigation regimens (p > 0.05). There were no significant differences of the pressure between RFT2 and MZ2 tips (p > 0.05). The placement of tips closer to the apex resulted in significantly higher pressure than at the orifice (p < 0.001). The use of 1.75 W power resulted in a significantly higher increase of pressure compared to 0.75 W (p < 0.001), regardless either the type of solutions or tips used. The magnitude of the pressure changes in the root canal at 0.75 W was significantly lower than 1.75 W regardless of either type of tips or solutions used. The closer the insertion of the tip to the apex, the higher the pressure.

Three-dimensional finite element analysis of anterior two-unit cantilever resin-bonded fixed dental prostheses.

The aim of this study was to evaluate the influence of different framework materials on biomechanical behaviour of anterior two-unit cantilever resin-bonded fixed dental prostheses (RBFDPs). A three-dimensional finite element model of a two-unit cantilever RBFDP replacing a maxillary lateral incisor was created. Five framework materials were evaluated: direct fibre-reinforced composite (FRC-Z250), indirect fibre-reinforced composite (FRC-ES), gold alloy (M), glass ceramic (GC), and zirconia (ZI). Finite element analysis was performed and stress distribution was evaluated. A similar stress pattern, with stress concentrations in the connector area, was observed in RBFDPs for all materials. Maximal principal stress showed a decreasing order: ZI>M>GC>FRC-ES>FRC-Z250. The maximum displacement of RBFDPs was higher for FRC-Z250 and FRC-ES than for M, GC, and ZI. FE analysis depicted differences in location of the maximum stress at the luting cement interface between materials. For FRC-Z250 and FRC-ES, the maximum stress was located in the upper part of the proximal area of the retainer, whereas, for M, GC, and ZI, the maximum stress was located at the cervical outline of the retainer. The present study revealed differences in biomechanical behaviour between all RBFDPs. The general observation was that a RBFDP made of FRC provided a more favourable stress distribution.

Treatment of dentinal hypersensitivity by means of Nd:YAP Laser: a preliminary in vitro study.

OBJECTIVE: The aim of this study is to evaluate the effectiveness of Nd:YAP laser to seal dentinal tubules at different parameters. MATERIAL AND METHODS: 24 caries-free human wisdom impacted molars were used. The crowns were sectioned transversally in order to totally expose the dentin. The smear layer was removed by a 1 min application of EDTA. Each surface was divided into four quadrants, but only three quadrants were irradiated at a different output power setting (irradiation speed: 1 mm/sec; optical fiber diameter: 320 µm; tangential incidence of beam and in noncontact mode). Samples were smeared with a graphite paste prior to laser irradiation. All specimens were sent for SEM analysis. Pulp temperature increases in additional twenty teeth were measured by a thermocouple. RESULTS: Morphological changes in dentin surfaces depend on the value of used energy density. Higher energy densities (2 W-4 W; 200-400 mJ; pulse duration: 100 m sec.; and 10 Hz) induce higher dentin modifications. Our results confirmed that Nd:YAP laser irradiations can lead to total or partial occlusion of dentin tubules without provoking fissures or cracks. Measurements of pulp temperature increases showed that Nd:YAP laser beam can be considered as harmless for pulp vitality for following irradiation conditions: 2 W (200 mJ) to 4 W (400 mJ) with an irradiation speed of 1 mm/sec; fiber diameter: 320 micrometers; 10 Hz; pulse duration: 100 m sec; noncontact mode and in tangential incidence to exposed dentin. The perpendicular incidence of the laser beam on exposed dentin may injure pulp vitality even at low output power of 3 W. CONCLUSIONS: Nd:YAP laser beam was able to seal the dentin tubules without damaging dentinal surfaces and without harming pulp vitality. Nd:YAP laser is effective and may be safely used for future in vivo treatments of dentinal hypersensitivity under certain conditions.

Comparative efficacy of materials used in patients undergoing pulpotomy or direct pulp capping in carious teeth: A systematic review and meta-analysis.

OBJECTIVES: Different materials have been used for capping the pulp after exposure during caries removal in permanent teeth. The purpose of this study was to collate and analyze all pertinent evidence from randomized controlled trials (RCTs) on different materials used in patients undergoing pulpotomy or direct pulp capping in carious teeth. MATERIALS AND METHODS: Trials comparing two or more capping agents used for direct pulp capping (DPC) or pulpotomy were considered eligible. An electronic search of four databases and two clinical trial registries was carried out up to February 28, 2021 using a search strategy properly adapted to the PICO framework. Screening, data extraction, and risk of bias (RoB) assessment of primary studies were performed in duplicate and independently. The primary outcome was clinical and radiological success; secondary outcomes included continued root formation, tooth discoloration, and dentin bridge formation. RESULTS: 21 RCTs were included in the study. The RoB assessment indicated a moderate risk among the studies. Due to significant clinical and statistical heterogeneity among the studies, performing network meta-analysis (NMA) was not possible. An ad hoc subgroup analysis revealed strong evidence of a higher success of DPC with Mineral Trioxide Aggregate (MTA) compared to calcium hydroxide (CH) (odds ratio [OR] = 3.10, 95% confidence interval [CI]: 1.66-5.79). MTA performed better than CH in pulp capping (both DPC and pulpotomy) of mature compared to immature teeth (OR = 3.34, 95% CI: 1.81-6.17). The GRADE assessment revealed moderate strength of evidence for DPC and mature teeth, and low to very low strength of evidence for the remaining subgroups. CONCLUSIONS: Considerable clinical and statistical heterogeneity among the trials did not allow NMA. The ad hoc subgroup analysis indicated that the clinical and radiographic success of MTA was higher than that of CH but only in mature teeth and DPC cases where the strength of evidence was moderate. PROSPERO Registration: number CRD42020127239.

In vitro inactivation of endodontic pathogens with Nd:YAG and Er:YAG lasers.

Both Nd:YAG and Er:YAG lasers have been suggested as root canal disinfection aids. The aim of this in vitro study is to compare both wavelengths in terms of irradiation dose required for microbial inactivation, to quantify these irradiation doses and to investigate the influence of certain (laser) parameters on the antimicrobial efficacy. Agar plates containing a uniform layer of Enterococcus faecalis, Candida albicans or Propionibacterium acnes were mounted perpendicularly underneath the laser handpieces (5 mm spot). The Er:YAG laser was operated in single-pulse mode. Pulse energies of 40-400 mJ and pulse lengths of 100, 300, 600, and 1,000 µs were tested. After incubation at 37°C for 48 h, growth on the plates was scored. The pulse energy yielding complete absence of growth over the entire spot area was taken as the total inhibition threshold (TIT). TITs were determined for every species and pulse length. The Nd:YAG laser was operated with pulse trains because single pulses were ineffective. Output power was 15 W and frequency was 100 Hz. Spots were irradiated for 5-120 s. After incubation, the diameters of the inhibition zones were measured. For the Er:YAG laser, TITs varied between 100 and 210 mJ, and differed significantly between species and pulse lengths. Using Nd:YAG irradiation, TITs were around 5,300 J/cm(2) for C. albicans and 7,100 J/cm(2) for P. acnes. No inhibition was observed for E. faecalis. Er:YAG irradiation was superior to Nd:YAG in inactivating microorganisms on agar surfaces.

Effect of radiation dose on the prevalence of apical periodontitis--a dosimetric analysis.

OBJECTIVES: The objective of this study is to analyse the effect of the radiation dose of oral radiotherapy for cancer on the presence of apical periodontitis in patients without dental pre-screening or specific preventive measures. MATERIALS AND METHODS: All selected patients had been diagnosed with cancer in the head and neck region and presented in the dental clinic post radiotherapy with side effects (mainly radiation caries). The panoramic radiographs of these patients were examined for several parameters, including tooth decay and apical periodontitis. The total radiation dose per tooth was determined. RESULTS: A total of 36 patient files were included, which accounted for 628 teeth to be scored. Tooth decay was present in 88.2% of teeth. Radiographic signs of apical periodontitis were found in 9.1% of the teeth. Teeth with apical periodontitis had significantly more caries present. The radiation dose was significantly higher for teeth with apical periodontitis (37.2 vs. 24.9 Gy). Binary logistic regression found the radiation dose to be the only explanatory variable in the presence of apical periodontitis. CONCLUSIONS: This study found that in zones with higher radiation dose, inflammation of the jawbone due to bacterial infection of the root canal is more likely to develop. This is probably due to bone changes post radiotherapy. CLINICAL RELEVANCE: An increase of this prevalance of apical periodontitis in irradiated bone found in this study needs to be taken into account in the dental evaluation before the start of radiotherapy.

Two-year clinical performance of glass ionomer and resin composite restorations in xerostomic head- and neck-irradiated cancer patients.

The aim of this study was to evaluate the clinical performance of adhesive filling materials in class V cavities in xerostomic head- and neck-irradiated cancer patients, in terms of marginal adaptation, anatomical form and recurrent caries. We selected 35 high-caries-risk, post-radiation, xerostomic adults with ≥3 cervical carious lesions in the same arch. Every patient received a KetacFil (KF), PhotacFil (PF) and Herculite XRV (HX) restoration. Patients were instructed to use a neutral 1% sodium fluoride gel in custom trays, on a daily basis. After 6, 12, 18 and 24 months, the restorations were examined for material loss, marginal integrity and recurrent caries. Fluoride compliance was determined at each recall appointment and recorded as the percentage of recommended use during that interval [compliance of ≤50% = NFUs, >50% = FUs]. Only 30 patients were available for recall at 6 months, with 28 patients at 12 and 18 months, and 27 patients at 24 months. In the NFU group, differences in recurrent caries were found between KF and HX at all observation times (p < 0.05). Differences (p < 0.05) in adaptation and/or anatomical form were found between KF and PF in NFUs after 18 and 24 months. In FUs, significant differences were observed between KF and PF, and KF and HX after 6 and 12 months, between KF and HX, PF and HX after 18 and 24 months. In summary, glass ionomers (especially the conventionally setting formulation) provide clinical caries inhibition but erode easily, while composite resin provides greater structural integrity.