Study of the Influence of Phase Noise on the MEMS Disk Resonator Gyroscope Interface Circuit.

In this paper, a detailed analysis of the influence of phase noise on the micro-electro-mechanical system (MEMS) disk resonator gyroscope (DRG) is presented. Firstly, a new time-varying phase noise model for the gyroscope is established, which explains how the drive loop circuit noise converts into phase noise. Different from previous works, the time-varying phase noise model in this paper is established in mechanical domain, which gain more physical insight into the origin of the phase noise in gyroscope. Furthermore, the impact of phase noise on DRG is derived, which shows how the phase noise affects angular velocity measurement. The analysis shows that, in MEMS DRG, the phase noise, together with other non-ideal factors such as direct excitation of secondary resonator, may cause a low frequency noise in the output of the gyroscope system and affect the bias stability of the gyroscope. Finally, numerical simulations and experiment tests are designed to prove the theories above.

Enhanced reverse saturable absorption in graphene/Ag2S organic glasses.

G/Ag2S composites were synthesized for the first time by a hydrothermal method. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy analysis demonstrated that Ag2S nanoparticles with a diameter of about 130 nm uniformly covered the graphene surfaces. G/Ag2S composites were dispersed in methyl methacrylate (MMA), polymerized at 75 °C for 30-35 min, and finally dried at 45 °C for 10 h, to afford G/Ag2S/PMMA organic glasses. The nonlinear absorption (NLA) properties of the G/Ag2S/PMMA organic glasses with different amounts of G/Ag2S were investigated by an open-aperture Z-scan technique. The experimental results showed that the G/Ag2S/PMMA organic glass with an appropriate amount of G/Ag2S exhibited enhanced reverse saturable absorption (RSA) properties compared to G/PMMA and Ag2S/PMMA organic glasses, which was attributed to the notable synergistic effects between graphene and Ag2S. Both one-photon absorption (OPA) in Ag2S and two-photon absorption (TPA) in graphene played important roles in RSA processes of the G/Ag2S/PMMA organic glasses. The effective NLA coefficient ßeff of the G/Ag2S/PMMA organic glasses was in the order of 10(3) cm GW(-1). Thus this kind of organic glasses have great promise in optical limiter and optical shutter applications.

Porous iron molybdate nanorods: in situ diffusion synthesis and low-temperature H2S gas sensing.

In the paper, we developed an in situ diffusion growth method to fabricate porous Fe2(MoO4)3 nanorods. The average diameter and the length of the porous nanorods were 200 nm and 1.2-4 µm, respectively. Moreover, many micropores existed along axial direction of the Fe2(MoO4)3 nanorods. In terms of nitrogen adsorption-desorption isotherms, calculated pore size was in the range of 4-115 nm, agreeing well with the transmission electron microscope observations. Because of the uniquely porous characteristics and catalytic ability at low temperatures, the porous Fe2(MoO4)3 nanorods exhibited very good H2S sensing properties, including high sensitivity at a low working temperature (80 °C), relatively fast response and recovery times, good selectivity, and long-term stability. Thus, the porous Fe2(MoO4)3 nanorods are very promising for the fabrication of high-performance H2S gas sensors. Furthermore, the strategy presented here could be expended as a general method to synthesize other hollow/porous-type transition metal molybdate nanostructures by rational designation in nanoscale.