Development of a methodology for assessing radiological dose due to use of NORM sludge as fertilizer.

In Europe, the general obligation to recycle drives for increased reuse of residues containing Naturally Occurring Radioactive Material (NORM). In agriculture, this has led to the reuse of sludge produced by groundwater filtration facilities as a means of fertilization. In the frame of the RadoNorm project, a methodology was developed for dose assessment of agricultural workers and other members of the public living near agricultural fields in which NORM-containing sludge is applied. Appropriate exposure scenarios were identified and modelled for each relevant NORM decay segment of both U-238 and Th-232 series, as well as for K-40. Dose assessments were performed using the software RESRAD-ONSITE with dose coefficients for external and internal exposure taken from the latest publications from the International Commission on Radiological Protection (ICRP). The objective was to develop a generic methodology to quantify exposure and to obtain screening values - so-called Operational Levels (OLs). These OLs pertain to the activity concentration of natural radionuclides (in terms of kBq kg-1) present in sludge that is reused in agriculture, for which dose criterion of 1 mSv year-1 is complied with. OLs can be used as screening tools by an authority/operator, even non-experts in the field of radiation protection. Results showed that the most critical decay segments are Ra-226+ and Ra-228+, for which OLs of the order of 1 kBq kg-1 were estimated. For all the other radionuclides, the calculated OLs are much higher than the activity concentrations typically found in sludge from water treatment facilities, and the radiological impact expected is well-below 1 mSv year-1. The methodology and results of this study could contribute to the update of the Clearance Levels and discharge levels reported in the European guidelines RP 122 Part II and RP 135, respectively.

A large and feasible national survey representative of population exposure to outdoor gamma radiation in urban areas.

Background: Although data on outdoor gamma radiation are available for many countries, they have generally been obtained with measurements performed in undisturbed environments instead of in urban areas where most of the population lives. Only one large national survey, with on-site measurements in urban areas, has been identified worldwide, probably due to high costs (e.g., personnel and instrumentation) and difficulties in selecting measuring points. Methods: A campaign of outdoor gamma radiation measurements has been carried out in the entire Italian territory. All measurement points were selected at the infrastructures of an Italian telecommunications company as representatives of all the possible situations of outdoor exposure to gamma radiation for population in urban areas. Ten replicates of portable gamma (X) detectors carried out all the measurements. Results: Approximately 4,000 measurements have been performed. They are distributed across 2,901 Italian municipalities, accounting for 75% of the Italian population. The national population-weighted mean of the gamma ambient dose equivalent rate (ADER) is 117 nSv h-1, and it ranges from 62 to 208 nSv h-1 and from 40 to 227 nSv h-1 for 21 regions and 107 provinces, respectively. The average variability at the municipal level, in terms of the coefficient of variation (CV) is 21%, ranging from 3 to 84%. The impact of land coverage and the distance from a building on the outdoor gamma radiation level was assessed with complementary measurements, leading to differences ranging from -40 to 50% and to 50%, respectively. Conclusion: A representative campaign of outdoor gamma dose rate measurements has been performed in Italy, only in urban areas, to assess the exposure effect due to outdoor gamma radiation on the population. It is the largest national campaign in urban areas worldwide, with a total of 3,876 on-site measurements. The land coverage and the distance from surrounding buildings were recognized to strongly affect outdoor gamma radiation levels, leading to high variability within small areas. The collaboration with a company that owns a network of facilities on a national territory as dense as the residing population made this survey feasible and affordable. Other countries might adopt this methodology to conduct national surveys in urban environments.

Tools for harmonized data collection at exposure situations with naturally occurring radioactive materials (NORM).

Naturally occurring radioactive materials (NORM) contribute to the dose arising from radiation exposure for workers, public and non-human biota in different working and environmental conditions. Within the EURATOM Horizon 2020 RadoNorm project, work is ongoing to identify NORM exposure situations and scenarios in European countries and to collect qualitative and quantitative data of relevance for radiation protection. The data obtained will contribute to improved understanding of the extent of activities involving NORM, radionuclide behaviours and the associated radiation exposure, and will provide an insight into related scientific, practical and regulatory challenges. The development of a tiered methodology for identification of NORM exposure situations and complementary tools to support uniform data collection were the first activities in the mentioned project NORM work. While NORM identification methodology is given in Michalik et al., 2023, in this paper, the main details of tools for NORM data collection are presented and they are made publicly available. The tools are a series of NORM registers in Microsoft Excel form, that have been comprehensively designed to help (a) identify the main NORM issues of radiation protection concern at given exposure situations, (b) gain an overview of materials involved (i.e., raw materials, products, by-products, residues, effluents), c) collect qualitative and quantitative data on NORM, and (d) characterise multiple hazards exposure scenarios and make further steps towards development of an integrated risk and exposure dose assessment for workers, public and non-human biota. Furthermore, the NORM registers ensure standardised and unified characterisation of NORM situations in a manner that supports and complements the effective management and regulatory control of NORM processes, products and wastes, and related exposures to natural radiation worldwide.

A methodology for the systematic identification of naturally occurring radioactive materials (NORM).

Naturally occurring radioactive materials (NORM) are present worldwide and under certain circumstances (e.g., human activities) may give radiation exposure to workers, local public or occasional visitors and non-human biota (NHB) of the surrounding ecosystems. This may occur during planned or existing exposure situations which, under current radiation protection standards, require identification, management, and regulatory control as for other practices associated with man-made radionuclides that may result in the exposure of people and NHB. However, knowledge gaps exist with respect to the extent of global and European NORM exposure situations and their exposure scenario characteristics, including information on the presence of other physical hazards, such as chemical and biological ones. One of the main reasons for this is the wide variety of industries, practices and situations that may utilise NORM. Additionally, the lack of a comprehensive methodology for identification of NORM exposure situations and the absence of tools to support a systematic characterisation and data collection at identified sites may also lead to a gap in knowledge. Within the EURATOM Horizon 2020 RadoNorm project, a methodology for systematic NORM exposure identification has been developed. The methodology, containing consecutive tiers, comprehensively covers situations where NORM may occur (i.e., minerals and raw materials deposits, industrial activities, industrial products and residues and their applications, waste, legacies), and thus, allows detailed investigation and complete identification of situations where NORM may present a radiation protection concern in a country. Details of the tiered methodology, with practical examples on harmonised data collection using a variety of existing sources of information to establish NORM inventories, are presented in this paper. This methodology is flexible and thus applicable to a diversity of situations. It is intended to be used to make NORM inventory starting from the scratch, however it can be used also to systematise and complete existing data.

Thoron Interference on Performance of Continuous Radon Monitors: An Experimental Study on Four Devices and a Proposal of an Indirect Method to Estimate Thoron Concentration.

The performance of continuous radon monitors (CRMs) is usually evaluated under controlled conditions in a radon chamber during calibrations or intercomparison exercises. The impact of thoron on CRMs response is rarely evaluated; in case the evaluation is performed, it is carried out in a controlled atmosphere with relatively constant, homogeneous, and generally high thoron concentrations and very low radon levels. In a real indoor environment, both radon and thoron concentrations are extremely variable, so the thoron interference evaluations reported in the literature are generally not applicable to CRMs used to measure radon concentration indoors. For this reason, an experimental study was carried out with four different CRMs in an indoor environment (an office room) where medium-to-high concentrations of both radon and thoron were expected. Thoron concentration has been separately evaluated throughout two different active monitors. Three CRMs resulted in overestimations of radon concentration by about 10% due to thoron interference, whereas such interference results were negligible for the fourth CRM. However, the thoron interference can also be used to assess thoron concentration by using CRM not specifically designed to do so. Based on the results of this study, an indirect method to assess thoron concentration is indeed proposed, relying on the combination of two identical monitors (one placed right close to the wall and the other one far enough from there).

A 10-year follow-up study of yearly indoor radon measurements in homes, review of other studies and implications on lung cancer risk estimates.

Uncertainty on long-term average radon concentration has a large impact on lung cancer risk assessment in epidemiological studies. The uncertainty can be estimated by year-to-year radon concentration variability, however few data are available. In Italy a study has been planned and conducted to evaluate year-to-year radon variability over several years in normally inhabited dwellings, mainly located in Rome. This is the longest study of this kind in Europe; repeat radon measurements are carried out for 10 years using LR-115 radon detectors in the same home in consecutive years. The study includes 84 dwellings with long-term average radon concentration ranging from 28 to 636 Bq/m3. The result shows that year-to-year variability of repeated measurements made in the same home in different years is low, with an overall coefficient of variation of 17%. This is smaller than most of those observed in studies from other European countries and USA, ranging from 15% to 62%. Influencing factors that may explain the differences between this study and other studies have been discussed. Due to the low yearly variability estimated in the present 10-year study, a negligible impact on lung cancer risk estimate for the Italian epidemiological study is expected.