Thermoregulatory capacity of goat kids from birth to weaning in a dry hot climate.

This study aimed to evaluate the thermoregulatory capacity and performance of Saanen goat kids from birth to weaning in a hot climate. Twelve newborn males and female goat kids with an initial body weight of 4.17 ± 0.81 kg were used. Physiological responses, climatic variables, and biometric traits data were collected. Univariate and multivariate analysis techniques were used. Heart rate (HR) was high up to the 6th week of life, with a reduction from the 7th week on (P < 0.001). Rectal temperature (RT) was lower in the first 2 weeks (P < 0.001), with an increase and stabilization occurring in the 7th and 8th weeks. Coat surface temperature (ST) was more activated from the 5th week onwards (P < 0.001). Body weight (BW) and withers height (WH) were higher in later weeks of the calving phase with a linear effect (P < 0.001). The first principal component demonstrated the relationship of sensible heat dissipation × body area of the goat kids; the second component shows the relationship of meteorological data with RT, having a positive relationship between RT with RH and negative with AT, and the third component points to the association of RR and HR. Of the animals, 81.3% were correctly classified in their group of origin in discriminant canonical analysis, with emphasis on the classification of the kids in the 1st-2nd and 3rd-4th weeks (classification percentage Æ© = 95.8%). It is concluded that (i) newborn kids activate latent mechanisms to maintain their homoeothermic during the first 2 weeks of life, and as they grow, they use sensitive heat loss processes, especially from the 5th week of life onwards and (ii) male and female goats do not show sexual dimorphism effect on body performance and body morphometric measurements up to 60 days of life.

Effect of at-home bleaching gels with different thickeners on the physical properties of a composite resin without bisphenol A.

OBJECTIVE: To investigate, in vitro, the influence of at-home bleaching with 16% carbamide peroxide (CP) gels containing different thickeners on the color, gloss, roughness, and microhardness of a composite resin with bisphenol A (BPA) and without bisphenol A (BPA-free). MATERIAL AND METHODS: Cylindrical samples (7 × 2 mm) of a composite resin with BPA (Filtek Z350 XT®; 3M/ESPE) and composite resin BPA-free (Vittra APS®; FGM) were subdivided into six subgroups (n = 12), according to the bleaching gel used: no bleaching (control), commercial gel with 16% CP and carbopol, experimental gel with 16% CP and carbopol, experimental gel with 16% CP and natrosol, experimental gel with carbopol and experimental gel with natrosol. At the end of the experimental phase, the specimens were analyzed for color (ΔE*ab and ΔE00 ), surface roughness (Ra), gloss (GU), and surface microhardness (SMH). The data for all analyzes were submitted to Levene's test, Shapiro-Wilk's test and ANOVA. RESULTS: For ΔE*ab and ΔE00 no statistically significant differences were found between all groups evaluated. Bleaching with experimental 16% CP gel with carbopol resulted in the lowest GU values for both composite resins evaluated. 16% CP experimental gel with natrosol resulted in higher Ra for the BPA composite resin and the bleaching with natrosol resulted in higher Ra for BPA-free. About 16% CP experimental gel with carbopol and 16% CP experimental gel with natrosol resulted in the lowest final SMH for composite resin with BPA. For the BPA-free composite resin, no differences were found between the groups in SMH for the same resin, however they presented the lowest values compared with all others groups. CONCLUSION: The effects on physical properties are dependent on the composition of the composite resin and the thickener/bleaching gel used. The BPA-free composite resin showed less changes after exposure to bleaching agent, although its initial physical properties were worse compared to a bleached BPA. CLINICAL RELEVANCE: The hydrogen peroxide and thickener of the at-home bleaching gel does impact the properties of composites with BPA or BPA-free such as gloss, roughness and surface microhardness, extremely important factors for maintaining an aesthetically and physically satisfactory restoration. BPA-free composite resins have inferior properties after at-home bleaching with different thickeners.

Nongenotoxic effects and a reduction of the DXR-induced genotoxic effects of Helianthus annuus Linné (sunflower) seeds revealed by micronucleus assays in mouse bone marrow.

BACKGROUND: This research evaluated the genotoxicity of oil and tincture of H. annuus L. seeds using the micronucleus assay in bone marrow of mice. The interaction between these preparations and the genotoxic effects of doxorubicin (DXR) was also analysed (antigenotoxicity test). METHODS: Experimental groups were evaluated at 24-48 h post treatment with N-Nitroso-N-ethylurea (positive control - NEU), DXR (chemotherapeutic), NaCl (negative control), a sunflower tincture (THALS) and two sources of sunflower oils (POHALS and FOHALS). Antigenotoxic assays were carried out using the sunflower tincture and oils separately and in combination with NUE or DXR. RESULTS: For THALS, analysis of the MNPCEs showed no significant differences between treatment doses (250-2,000 mg.Kg-1) and NaCl. A significant reduction in MNPCE was observed when THALS (2,000 mg.Kg-1) was administered in combination with DXR (5 mg.Kg-1). For POHALS or FOHALS, analysis of the MNPCEs also showed no significant differences between treatment doses (250-2,000 mg.Kg-1) and NaCl. However, the combination DXR + POHALS (2,000 mg.Kg-1) or DXR + FOHALS (2,000 mg.Kg-1) not contributed to the MNPCEs reduction. CONCLUSIONS: This research suggests absence of genotoxicity of THALS, dose-, time- and sex-independent, and its combination with DXR can reduce the genotoxic effects of DXR. POHALS and FOHALS also showed absence of genotoxicity, but their association with DXR showed no antigenotoxic effects.

Evaluation of the mutagenicity and antimutagenicity of Ziziphus joazeiro Mart. bark in the micronucleus assay.

The aim of this study was to evaluate the mutagenicity (clastogenicity/aneugenicity) of a glycolic extract of Ziziphus joazeiro bark (GEZJ) by the micronucleus assay in mice bone marrow. Antimutagenic activity was also assessed using treatments associated with GEZJ and doxorubicin (DXR). Mice were evaluated 24-48 h after exposure to positive (N-nitroso-N-ethylurea, NEU - 50 mg.kg(-1) and DXR - 5 mg.kg(-1)) and negative (150 mM NaCl) controls, as well as treatment with GEZJ (0.5-2 g.kg(-1)), GEZJ (2 g.kg(-1)) + NEU and GEZJ (2 g.kg(-1)) + DXR. There were no significant differences in the frequencies of micronucleated polychromatic erythrocytes in mice treated with GEJZ and GEJZ + DXR compared to the negative controls, indicating that GEZJ was not mutagenic. Analysis of the polychromatic:normochromatic erythrocyte ratio revealed significant differences in the responses to doses of 0.5 g.kg(-1) and 1-2 g.kg(-1) and the positive control (NEU). These results indicated no systemic toxicity and moderate toxicity at lower and higher doses of GEZJ. The lack of mutagenicity and systemic toxicity in the antimutagenic assays, especially for treatment with GEZJ + DXR, suggested that phytochemical compounds in Z. joazeiro bark attenuated DXR-induced mutagenicity and the moderate systemic toxicity of a high dose of Z. joazeiro bark (2 g.kg(-1)). Further studies on the genotoxicity of Z. joazeiro extracts are necessary to establish the possible health risk in humans and to determine the potential as a chemopreventive agent for therapeutic use.

Oral Staphylococcus Species and MRSA Strains in Patients with Orofacial Clefts Undergoing Surgical Rehabilitation Diagnosed by MALDI-TOF MS.

This study investigated the occurrence and dynamics of oral Staphylococcus species in patients with orofacial clefts undergoing surgical rehabilitation treatment. Patients (n = 59) were statistically stratified and analyzed (age, gender, types of orofacial clefts, surgical history, and types of previous surgical rehabilitation). Salivary samples were obtained between hospitalization and the return to the specialized medical center. Microbiological diagnosis was performed by classical methods, and MALDI-TOF MS. MRSA strains (SCCmec type II, III, and IV) were characterized by the Decision Tree method. A total of 33 (55.9%) patients showed oral staphylococcal colonization in one, two, or three sampling steps. A high prevalence has been reported for S. aureus (including HA-, MRSA and CA-MRSA), followed by S. saprophyticus, S. epidermidis, S. sciuri, S. haemolyticus, S. lentus, S. arlettae, and S. warneri. The dynamics of oral colonization throughout surgical treatment and medical follow-up may be influenced by (i) imbalances in staphylococcal maintenance, (ii) efficiency of surgical asepsis or break of the aseptic chain, (iii) staphylococcal neocolonization in newly rehabilitated anatomical oral sites, and (iv) total or partial maintenance of staphylococcal species. The highly frequent clinical periodicity in specialized medical and dental centers may contribute to the acquisition of MRSA in these patients.

Knoop hardness and effectiveness of dual-cured luting systems and flowable resin to bond leucite-reinforced ceramic to enamel.

PURPOSE: The aim of this study was to evaluate the Knoop microhardness and microshear bond strength (MSBS) of dual-cured luting systems and flowable resin bonded to leucite-reinforced ceramics and enamel. MATERIALS AND METHODS: Eighty bovine incisors were randomly divided into four groups per test (microhardness and microshear; n = 10) according to the bonding procedure: Excite DSC/Variolink, Clearfil SE Bond/Panavia F, Adper Scotchbond Multi-Purpose Plus/RelyX ARC, and Adper Single Bond 2/Filtek Z350 Flow. For the KHN measurement, the cement was applied on the enamel surface and light-cured through a ceramic disk (5 mm diameter × 1.2 mm thick). Five indentations were performed in each specimen and measured at HMV-2. For the microshear test, two cylinders of a leucite-reinforced ceramic (1 mm diameter × 2 mm height) were bonded to the enamel substrate in accordance with the bonding procedures previously established. One cylinder was tested 24 hours after cementation, and the other was subjected to thermocycling (2000 cycles) and then submitted to an MSBS test. The data from the hardness and bond strength tests were subjected to one- and two-way repeated-measures analysis of variance (ANOVA), respectively, and to Tukey's test (α= 0.05). RESULTS: Scotchbond/RelyX ARC presented higher values of bond strength, while Single Bond/Z350 Flow showed lower values. The thermocycling promoted a reduction in the bond strength values for all groups. Panavia F presented higher values of KHN, and the flowable resin presented the lowest. RelyX ARC and Variolink presented intermediate values on hardness evaluation. CONCLUSIONS: For ceramic cementation, dual-cured resin luting systems promoted more reliable bonding and microhardness values than the flowable resin.

The effect of curing light and chemical catalyst on the degree of conversion of two dual cured resin luting cements.

The aim of this study was to evaluate the influence of different curing lights and chemical catalysts on the degree of conversion of resin luting cements. A total of 60 disk-shaped specimens of RelyX ARC or Panavia F of diameter 5 mm and thickness 0.5 mm were prepared and the respective chemical catalyst (Scotchbond Multi-Purpose Plus or ED Primer) was added. The specimens were light-cured using different curing units (an argon ion laser, an LED or a quartz-tungsten-halogen light) through shade A2 composite disks of diameter 10 mm and thickness 2 mm. After 24 h of dry storage at 37°C, the degree of conversion of the resin luting cements was measured by Fourier-transformed infrared spectroscopy. For statistical analysis, ANOVA and the Tukey test were used, with p ≤ 0.05. Panavia F when used without catalyst and cured using the LED or the argon ion laser showed degree of conversion values significantly lower than RelyX ARC, with and without catalyst, and cured with any of the light sources. Therefore, the degree of conversion of Panavia F with ED Primer cured with the quartz-tungsten-halogen light was significantly different from that of RelyX ARC regardless of the use of the chemical catalyst and light curing source. In conclusion, RelyX ARC can be cured satisfactorily with the argon ion laser, LED or quartz-tungsten-halogen light with or without a chemical catalyst. To obtain a satisfactory degree of conversion, Panavia F luting cement should be used with ED Primer and cured with halogen light.

Central rib and the nutritive value of leaves in forage grasses.

In grasses, leaf expansion and central rib growth occur in a non-proportional manner, with potential implications to the nutritive value of leaves. The objective of this study was to evaluate the relationship among blade length, percentage of central rib, anatomical characteristics and the nutritive value along the length of leaf blades of different sizes and hierarchical order of insertion on the tiller axis of Napier elephant grass (Pennisetum purpureum Schum. cv. Napier). Two experiments were carried out with isolated growing plants during the summer of 2017 (January to March). Central rib mass increased linearly with the increase in leaf blade mass and its percentage relative to blade mass decreased from the base to the tip of the leaf. There were no significant variations in anatomical characteristics along the length of leaf blades when central rib was not taken into account. The central rib showed negative relationship with nutritive value. The apical portions of long leaves showed similar digestibility to short leaves. The multivariate analysis of Cluster and Principal Components grouped the response variables according to leaf hierarchical order, final blade length and percentage of structural tissues, highlighting the relationship between leaf size, structural tissues and nutritive value.

Adhesion, Mechanical Properties, and Microstructure of Resin-matrix CAD-CAM Ceramics.

PURPOSE: To investigate the effects of 1-year water storage and surface treatments on shear bond strength (SBS) of two composite cements bonded to resin matrix CAD-CAM ceramics (RMCs) and on the mechanical properties of RMCs. MATERIALS AND METHODS: Three types of RMCs were tested: 1. polymer-infiltrated hybrid ceramic (PIHC, Enamic, VITA Zahnfabrik); 2. resin nanoceramic (RNC, Lava Ultimate, 3M Oral Care); and 3. flexible hybrid ceramic (FHC, Cerasmart, GC). One indirect laboratory composite (ILC, Epricord, Kuraray Noritake) was used as control. For each material, 60 plates (14 x 7 x 1 mm) were prepared for the SBS test and submitted to three different surface treatments: following manufacturer's instructions, non-thermal atmospheric plasma application (30 s), and plasma + bonding agent. Two composite cements were tested: RelyX Ultimate (3M Oral Care) and Panavia V5 (Kurarary Noritake). Two resin cylinders (1.5 mm diameter x 1.5 mm height) were bonded to each plate (n = 10), with one tested after 24-h storage in distilled water and the other after 1 year of storage in distilled water. Twenty rectangular bars (12 x 2 x 1 mm) of each indirect material were prepared and submitted to the 3-point flexural test after 24-h or 1-year water storage to determine the elastic modulus (EM) and flexural strength (FS) (n = 10). Fractured samples were also examined with SEM and energy dispersive x-ray spectroscopy (EDS). SBS data were analyzed by four-way ANOVA, and EM and FS data by two-way ANOVA, followed by Tukey's post-hoc test (α = 0.05). RESULTS: Groups treated in accordance with manufacturer's instructions exhibited higher SBS than did plasma and plasma + bonding agent groups for all indirect materials, composite cements, and storage periods tested. In general, RelyX Ultimate displayed higher mean SBS than did Panavia V5, except for some groups of ILC where manufacturer's instructions were followed. After 1-year storage in water, all groups exhibited a significant reduction in SBS, except for some groups that following manufacturer's instructions. ILC showed the lowest values of EM and FS. Among the CAD-CAM materials, FHC exhibited the lowest EM and highest FS means, while PIHC possessed the highest EM and lowest FS means for both storage periods. CONCLUSIONS: In general, following the respective manufacturer's instructions yielded the best bond strength results. For most materials, 1-year water storage decreased bond strength of composite cements to RMCs, as well as their FS, while increasing their EM. Microstructure and composition influenced the mechanical properties studied.

Effects of desensitizing products on the reduction of pain sensitivity caused by in-office tooth bleaching: a 24-week follow-up.

OBJECTIVE: To clinically assess the effect of desensitizing gels and dentifrices on the reduction in pain sensitivity and color variation during tooth bleaching. METHODOLOGY: A total of 108 volunteers were randomly separated into the following groups of n=12: GT/S-glycerine and thickener/sucralose; NF/S-potassium nitrate and sodium fluoride/sucralose; NA/S-potassium nitrate and arginine/sucralose; GT/AC-glycerine and thickener/arginine and calcium carbonate; NF/AC-potassium nitrate and sodium fluoride/arginine and calcium carbonate; NA/AC-potassium nitrate and arginine/arginine and calcium carbonate; GT/PN-glycerine and thickener/potassium nitrate; NF/PN-potassium nitrate and sodium fluoride/potassium nitrate; and NA/PN-potassium nitrate and arginine/potassium nitrate. Sensitivity was assessed with the numerical analogue scale, and color variation (ΔE) was measured with a spectrophotometer. The sensitivity values obtained were subjected to a multivariate analysis of variance (MANOVA) and color variation values were subjected to a randomized analysis of variance (p<0.05). RESULTS: The NF/AC, NA/AC, NF/PN, and NA/PN groups presented lower sensitivity values and reduced sensitivity compared to those of the other groups throughout the clinical sessions. None of the groups showed sensitivity at the 24-week assessment. Statistically, no significant difference were observed in the color values among the groups four weeks after the beginning of bleaching (p=0.074). Additionally, the color assessment of all groups was statistically similar four weeks (p=0.084) and 24 weeks (p=0.118) after the beginning. CONCLUSION: Our results indicate that adding NF/S, NA/S, NF/AC, and NA/AC desensitizers to tooth bleaching protocols reduces pain sensitivity without affecting its effectiveness.

Umami Ingredient: Flavor enhancer from shiitake (Lentinula edodes) byproducts.

An alternative use of shiitake stipes, usually treated as waste, was proposed for the production of a powder ingredient, rich in umami compounds, aiming its application in food. The extraction of umami compounds was optimized through the Response Surface Methodology (RSM), in order to obtain an extract with high umami taste intensity. From the optimized condition, a comparative analysis of shiitake stipes dehydration method was performed. Stipes were dehydrated by hot air drying (HD) and freeze drying (FD), submitted to extraction and the umami compounds in the extracts were compared. The comparative analysis showed that the 5' - nucleotides are more sensitive to prolonged heating, while the release of free amino acids (FAA) was favored by hot air drying. The HD samples extract showed higher Equivalent Umami Concentration (EUC). The spray drying of the HD samples extract allowed the production of a newly powder ingredient rich in umami compounds (Umami Ingredient) that can be applied in diverse food matrices. Due to the presence of umami compounds, Umami Ingredient can be a potential alternative to help in the process of sodium reduction by enhancing food flavor.

Aflatoxin B1 and zearalenone in soybeans: occurrence and distribution in whole and defective kernels.

Few studies have addressed the distribution of mycotoxins in soybean and/or their processing fractions. In this study, samples from commercial lots were collected in four Brazilian states. The distribution of mycotoxins in soybean fractions, according to their commercial grading system, namely whole kernels (WK), split, broken and crushed kernels (SBCK), damaged kernels (DK), heat damaged and burned kernels (HDBK), moldy kernels (MK), greenish kernels (GK), foreign material + impurities (FMI), were analyzed using HPLC-FLD. AFB1 and ZEN tested positive in 43.3 and 80%, respectively. The incidence of AFB1 was higher in MK (50%), followed by HDBK (30.4%) and FMI (26.0%). ZEA incidence ranged from 69% (SBCK) to 100% (HDBK). Co-occurrence (53.3%) in at least one fraction was also detected. Brazil is the second world producer of soybeans, which places the country in a very important position. Therefore, the information provided is crucial and timely relevant for the industry and policymakers.

Surface roughness evaluation and whitening efficiency on tooth enamel after using whitening toothpaste: a randomized double-blinded study

The aim of this randomized double-blinded study was to evaluate the enamel surface roughness and color change after one month of whitening toothpaste use and the color stability obtained 1 month after its interruption. 30 volunteers were divided into 3 groups (n = 10) corresponding to the dentifrices: 1) Colgate Total 12 Clean Mint (TD) (Control), 2) Colgate Luminous White (LW) and 3) Sensodyne Whitening Extra Fresh (SB). The volunteers were impression with addition silicone to obtain an epoxy resin replica of the upper central incisor for the initial surface roughness evaluation using a profilometer and the initial color of the incisors and canines was evaluated with a spectrophotometer after one week of wash-out. After 1 month, the color of the central incisors and canines was measured again, and the volunteers were molded to obtain a second replica to the final roughness analysis. Data were submitted to ANOVA-one way (p≤0.05). The results showed that there was no statistical difference between the dentifrices for color difference and surface roughness for all the studied conditions. It was possible to conclude that the whitening dentifrices used in this study were not able to alter the initial color of the teeth and did not cause changes in the surface roughness of enamel.

Spatiotemporal analysis of distribution of pest and predator in corn crops

Crop pests have negative impacts on yield. This paper proposes a spatiotemporal geostatistical modeling to compare data of adult Syrphidae fly count and corn leaf aphid Rhopalosiphum maidis (Fitch, 1856) colonies in corn crops. The use of a geostatistical model that allows the space-time variation makes the approach more interesting because it is a more complete model. Multiple regression was used to model the trend component for the variable response adult Syrphidae fly count and corn leaf aphid colonies, with the coordinates serving as covariates and the spatiotemporal variations around the deviation are described by a random spacetime residual field. Finally, the prediction map obtained by kriging may be a biological indicator of possible corn leaf aphid colonies in the corn crop. It was possible to verify that the occurrence of the pest provided a significant increase in adult predators and seminatural habitats may favor populations of natural enemies.

Co-occurrence and distribution of deoxynivalenol, nivalenol and zearalenone in wheat from Brazil.

Fusarium mycotoxins deoxynivalenol (DON), nivalenol (NIV) and zearalenone (ZEN) were investigated in wheat from the 2009 and 2010 crop years. Samples (n = 745) from commercial fields were collected in four wheat producing regions (WPR) which differed in weather conditions. Analyses were performed using HPLC-DAD. Contamination with ZEN, DON and NIV occurred in 56, 86 and 50%, respectively. Also, mean concentrations were different: DON = 1046 µg kg(-1), NIV < 100 µg kg(-1) and ZEN = 82 µg kg(-1). Co-occurrence of ZEN, DON and NIV was observed in 74% of the samples from 2009 and in 12% from 2010. Wet/cold region WPR I had the highest mycotoxin concentration. Wet/moderately hot region WPR II had the lowest mycotoxin levels. Furthermore, the mean concentration of each mycotoxin was higher in samples from 2009 as compared with those from 2010. Precipitation during flowering or harvest periods may explain these results.

Aflatoxin M1 in raw milk from different regions of São Paulo state--Brazil.

A total of 635 raw milk samples from 45 dairy farms, from three regions of São Paulo state - Brazil, were evaluated during 15 months for aflatoxin M1 (AFM1). AFM1 was determined by high performance liquid chromatograph with fluorescence detection. AFM1 was detected (>0.003 µg kg(-1)) in 72.9%, 56.3% and 27.5% of the samples from Bauru, Araçatuba and Vale do Paraíba regions, respectively. The mean AFM1 contamination considering all the samples was 0.021 µg kg(-1). Furthermore, the concentration of AFM1 was quite different among Bauru (0.038 µg kg(-1)), Araçatuba (0.017 µg kg(-1)) and Vale do Paraíba (<0.01 µg kg(-1)) regions. Only three samples (0.5%) had higher contamination than the tolerated limit in Brazil (0.50 µg kg(-1)) and 64 samples (10.1%) had a higher contamination than the maximum limit as set by the European Union (0.050 µg kg(-1)). The estimated AFM1 daily intake was 0.358 and 0.120 ng kg(-1) body weight per day for children and adults, respectively.

Effects of desensitizing products on the reduction of pain sensitivity caused by in-office tooth bleaching: a 24-week follow-up

Abstract Objective To clinically assess the effect of desensitizing gels and dentifrices on the reduction in pain sensitivity and color variation during tooth bleaching. Methodology A total of 108 volunteers were randomly separated into the following groups of n=12: GT/S-glycerine and thickener/sucralose; NF/S-potassium nitrate and sodium fluoride/sucralose; NA/S-potassium nitrate and arginine/sucralose; GT/AC-glycerine and thickener/arginine and calcium carbonate; NF/AC-potassium nitrate and sodium fluoride/arginine and calcium carbonate; NA/AC-potassium nitrate and arginine/arginine and calcium carbonate; GT/PN-glycerine and thickener/potassium nitrate; NF/PN-potassium nitrate and sodium fluoride/potassium nitrate; and NA/PN-potassium nitrate and arginine/potassium nitrate. Sensitivity was assessed with the numerical analogue scale, and color variation (ΔE) was measured with a spectrophotometer. The sensitivity values obtained were subjected to a multivariate analysis of variance (MANOVA) and color variation values were subjected to a randomized analysis of variance (p<0.05). Results The NF/AC, NA/AC, NF/PN, and NA/PN groups presented lower sensitivity values and reduced sensitivity compared to those of the other groups throughout the clinical sessions. None of the groups showed sensitivity at the 24-week assessment. Statistically, no significant difference were observed in the color values among the groups four weeks after the beginning of bleaching (p=0.074). Additionally, the color assessment of all groups was statistically similar four weeks (p=0.084) and 24 weeks (p=0.118) after the beginning. Conclusion Our results indicate that adding NF/S, NA/S, NF/AC, and NA/AC desensitizers to tooth bleaching protocols reduces pain sensitivity without affecting its effectiveness.

Effects of primer excess on marginal adaptation, nanoleakage and bond strength of adhesive systems after aging

There is no consensus about the amount of primer inserted into the cavity. Aim: This study aimed to evaluate the effects of the amount of primer used on dentin microtensile bond strength (µTBs), nanoleakage and marginal sealing, following thermomechanical aging. Methods: 48 human third molars were selected and a box-shaped class I cavity was constructed to maintain enamel margins. Teeth were randomly assigned to 6 experimental groups (n=8). For the bonding protocols of the restorative procedure, two adhesive systems were used: three-step etch-and-rinse and two-step self-etch. Epoxy resin replicas of the occlusal surface were made, and the specimens were submitted to thermomechanical aging. Newer replicas were obtained after thermomechanical aging, and marginal adaptation was observed using SEM. To obtain sections (0.7 x 0.7 mm) for testing at a tension of 0.5 mm/min, teeth were serially sectioned in the buccallingual direction, parallel to the occlusal surface. Failure mode was then obtained. For nanoleakage evaluation, one section of each tooth was immersed in AgNO3 and evaluated using SEM. The µTBs data were submitted to a two-way ANOVA and Tukey's test (α= 0.05) Results: One drop of primer promoted higher µTBs than two or three drops. Besides, the three-step etch-and-rinse promoted greater µTBs (19.78) than the two-step self-etch adhesive (12.23). The increase in the amount of primer was directly proportional to the increase of infiltration. All groups exhibited more gaps after thermomechanical aging. Conclusion: Using an excess of primer is not recommended because it reduces the µTBs and forms an unsatisfactory hybrid layer

Influence of whitening dentifrices and mechanical brushing on color change and surface roughness of bulk fill resins

The use of whitening dentifrices during oral hygiene may cause surface modifications such as color change (ΔE) and increase surface roughness (Ra) of composite resin. Aim: This study aimed to evaluate the effect of whitening dentifrices and mechanical brushing on color change and surface roughness of Bulk Fill (Filtek Bulk Fill - F) and (Aura Bulk Fill - A) composite resins. Materials and methods: Sixty cylindrical specimens were fabricated of each composite resin. After initial color evaluations (Konica Minolta CM-700d), with D65 standard illuminant, and the surface roughness (Surfcorder SE 1700, Kosalab), the specimens were assigned (n=10) according to the whitening dentifrice used: True White (T), Colgate Total 12 Professional Whitening (D), Luminous White Advanced (L). Specimens were submitted to mechanical brushing (10,000 cycles); new color and surface roughness evaluations were taken. Data were analyzed by ANOVA, Duncan test and Dunnet test were used to identify differences between groups (α=5%). Results: The results showed that the tooth brushing time promoted a significant increase in ΔE of the FT group. The FD group exhibited intermediate values of ΔE and was similar to all groups tested. There was a significant increase in the surface roughness of the AD and AT groups after the mechanical tooth brushing. Conclusion: The results showed no significant changes were observed in surface roughness for F groups after toothbrushing. It be concluded that the color change and surface roughness of the composite resins after toothbrushing are dependent on the interaction between the composition of the composite resin and the characteristics of the dentifrice

Conjugated linoleic acid combined with physical activity reduces body fat accumulation but does not modify lean body mass in male and female Wistar rats.

Several biological and clinical studies have suggested that conjugated linoleic acid (CLA) prevents body fat accumulation and increases lean body mass. CLA is available as a concentrated dietary supplement and is purported to provide the aforementioned benefits for people who perform physical activity. This study was conducted to evaluate the effect of a CLA-supplemented diet combined with physical activity on the body composition of Wistar rats. Two groups of Wistar rats of both sexes, between 45 and 60 days old, were fed a diet containing 5.5% soybean oil (control group) or a CLA-supplemented diet (0.5% CLA and 5.0% soybean oil) (test group). Half the rats in both groups were assigned to exercise by running on a treadmill. The biochemical and anatomical body compositions were analyzed. In both groups, CLA had no effect on the dietary consumption or the weight of the liver, heart, and lungs. However, it did influence the overall weight gain of exercised male rats and the chemical and anatomical body composition in exercised and sedentary rats of both sexes. The results confirm that a CLA-supplemented diet with and without physical activity reduced body fat accumulation in rats of both sexes. However, there is no evidence of an increase in the lean body mass of the exercised rats.