Thermally highly stable amorphous zinc phosphate intermediates during the formation of zinc phosphate hydrate.

The mechanisms by which amorphous intermediates transform into crystalline materials are still poorly understood. Here we attempt to illuminate the formation of an amorphous precursor by investigating the crystallization process of zinc phosphate hydrate. This work shows that amorphous zinc phosphate (AZP) nanoparticles precipitate from aqueous solutions prior to the crystalline hopeite phase at low concentrations and in the absence of additives at room temperature. AZP nanoparticles are thermally stable against crystallization even at 400 °C (resulting in a high temperature AZP), but they crystallize rapidly in the presence of water if the reaction is not interrupted. X-ray powder diffraction with high-energy synchrotron radiation, scanning and transmission electron microscopy, selected area electron diffraction, and small-angle X-ray scattering showed the particle size (≈20 nm) and confirmed the noncrystallinity of the nanoparticle intermediates. Energy dispersive X-ray, infrared, and Raman spectroscopy, inductively coupled plasma mass spectrometry, and optical emission spectrometry as well as thermal analysis were used for further compositional characterization of the as synthesized nanomaterial. (1)H solid-state NMR allowed the quantification of the hydrogen content, while an analysis of (31)P{(1)H} C rotational echo double resonance spectra permitted a dynamic and structural analysis of the crystallization pathway to hopeite.

Anhydrous Amorphous Calcium Oxalate Nanoparticles from Ionic Liquids: Stable Crystallization Intermediates in the Formation of Whewellite.

The mechanisms by which amorphous intermediates transform into crystalline materials are not well understood. To test the viability and the limits of the classical crystallization, new model systems for crystallization are needed. With a view to elucidating the formation of an amorphous precursor and its subsequent crystallization, the crystallization of calcium oxalate, a biomineral widely occurring in plants, is investigated. Amorphous calcium oxalate (ACO) precipitated from an aqueous solution is described as a hydrated metastable phase, as often observed during low-temperature inorganic synthesis and biomineralization. In the presence of water, ACO rapidly transforms into hydrated whewellite (monohydrate, CaC2 O4 ⋅H2 O, COM). The problem of fast crystallization kinetics is circumvented by synthesizing anhydrous ACO from a pure ionic liquid (IL-ACO) for the first time. IL-ACO is stable in the absence of water at ambient temperature. It is obtained as well-defined, non-agglomerated particles with diameters of 15-20 nm. When exposed to water, it crystallizes to give (hydrated) COM through a dissolution/recrystallization mechanism.

PAA-PAMPS copolymers as an efficient tool to control CaCO3 scale formation.

Scale formation, the deposition of certain minerals such as CaCO3, MgCO3, and CaSO4·2H2O in industrial facilities and household devices, leads to reduced efficiency or severe damage. Therefore, incrustation is a major problem in everyday life. In recent years, double hydrophilic block copolymers (DHBCs) have been the focus of interest in academia with regard to their antiscaling potential. In this work, we synthesized well-defined blocklike PAA-PAMPS copolymers consisting of acrylic acid (AA) and 2-acrylamido-2-methyl-propane sulfonate (AMPS) units in a one-step reaction by RAFT polymerization. The derived copolymers had dispersities of 1.3 and below. The copolymers have then been investigated in detail regarding their impact on the different stages of the crystallization process of CaCO3. Ca(2+) complexation, the first step of a precipitation process, and polyelectrolyte stability in aqueous solution have been investigated by potentiometric measurements, isothermal titration calorimetry (ITC), and dynamic light scattering (DLS). A weak Ca(2+) induced copolymer aggregation without concomitant precipitation was observed. Nucleation, early particle growth, and colloidal stability have been monitored in situ with DLS. The copolymers retard or even completely suppress nucleation, most probably by complexation of solution aggregates. In addition, they stabilize existing CaCO3 particles in the nanometer regime. In situ AFM was used as a tool to verify the coordination of the copolymer to the calcite (104) crystal surface and to estimate its potential as a growth inhibitor in a supersaturated CaCO3 environment. All investigated copolymers instantly stopped further crystal growth. The carboxylate richest copolymer as the most promising antiscaling candidate proved its enormous potential in scale inhibition as well in an industrial-filming test (Fresenius standard method).

Use of a Western blot technique for the serodiagnosis of glanders.

BACKGROUND: The in vivo diagnosis of glanders relies on the highly sensitive complement fixation test (CFT). Frequently observed false positive results are troublesome for veterinary authorities and cause financial losses to animal owners. Consequently, there is an urgent need to develop a test with high specificity. Hence, a Western blot assay making use of a partly purified lipopolysaccaride (LPS) containing antigen of three Burkholderia mallei strains was developed. The test was validated investigating a comprehensive set of positive and negative sera obtained from horses and mules from endemic and non endemic areas. RESULTS: The developed Western blot assay showed a markedly higher diagnostic specificity when compared to the prescribed CFT and therefore can be used as a confirmatory test. However, the CFT remains the test of choice for routine testing of glanders due to its high sensitivity, its feasibility using standard laboratory equipment and its worldwide distribution in diagnostic laboratories. CONCLUSIONS: The CFT should be amended by the newly validated Western blot to increase the positive likelihood ratio of glanders serodiagnosis in non endemic areas or areas with low glanders prevalence. Its use for international trade of horses and mules should be implemented by the OIE.

Reliable quantification of plasma HDV RNA is of paramount importance for treatment monitoring: A European multicenter study.

OBJECTIVES: Quantification of plasma hepatitis D virus (HDV) RNA is the essential tool for patient management under antiviral therapy. The aim of this European multicenter study was to improve the comparability of quantitative results reported by different laboratories using the CE/IVD-labeled RoboGene HDV RNA Quantification Kit 2.0 (Roboscreen GmbH) with different manual or automated nucleic acid extraction protocols/platforms and amplification/detection devices. METHODS: For harmonization of HDV RNA concentrations obtained by different protocols, correction factors (CF) were determined using the 1st WHO International Standard for HDV RNA. The limit of detection (LOD) and accuracy were determined for each protocol by using reference material. Furthermore, clinical samples were analyzed and results compared. RESULTS: The CF ranged from 20 to 1,870 depending on the protocol used. The LOD was found between 4 and 450 IU/ml. When accuracy was tested, external quality control (EQC) samples containing low HDV RNA concentrations were not detected by those protocols with higher LODs. For EQC samples, the maximum standard deviation of HDV RNA concentrations was found to be 0.53 log10 IU/ml, for clinical samples 0.87 log10 IU/mL. CONCLUSION: To ensure reliability in quantification of HDV RNA, any modification of the extraction and amplification/detection protocol validated by the manufacturer requires revalidation. With the 1st WHO International Standard for HDV RNA, the CF could easily be calculated leading to harmonization of quantitative results. This warrants both accurate monitoring of response to existing anti-HDV treatment and comparability of study results investigating novel anti-HDV drugs.

Graphene-type sheets of Nb(1-x)W(x)S2: synthesis and in situ functionalization.

Enlightened by the discovery of graphenes, a variety of inorganic analogues have been synthesized and characterized in recent years. Solvated Nb1-xWxS2 analogues of graphene-type sheets were prepared by lithiation and exfoliation of multistacked Nb1-xWxS2 coin roll nanowires (CRNWs), followed by in situ functionalization with gold nanoparticles to synthesize gold-loaded Nb1-xWxS2/Au nanocomposites. The Nb1-xWxS2 nanosheets and the corresponding Nb1-xWxS2/Au nanocomposites were characterized by high resolution electron microscopy (HRTEM), energy-dispersive X-ray spectroscopy (EDX), scanning transmission electron microscopy (STEM), dynamic light scattering (DLS) and scanning force microscopy (AFM). The graphene-type sheets are stable in water and other solvents and can be functionalized similarly as chalcogen-terminated surfaces (e.g. with Au nanoparticles).

Multi-photon imaging of amine-functionalized silica nanoparticles.

A convenient and simple strategy for preparing water soluble, photoluminescent functionalized silica nanoparticles (M-dots) in the absence of fluorophores or metal doping is demonstrated. These M-dots can be used for bioimaging using one and two-photon microscopy. Because of their high photostability, low toxicity and high biocompatibility compared with Lumidot™ CdSe/ZnS quantum dots, functionalized silica particles are superior alternatives for current bioimaging platforms. Moreover, the presence of a free amine group at the surface of the M-dots allows biomolecule conjugation (e.g. with antibodies, proteins) in a single step for converting these photoluminescent SiO(2) nanoparticles into multifunctional efficient vehicles for theragnostics.

Ni@Fe2O3 heterodimers: controlled synthesis and magnetically recyclable catalytic application for dehalogenation reactions.

Ni@Fe(2)O(3) heterodimer nanoparticles (NPs) were synthesized by thermal decomposition of organometallic reactants. After functionalization, these Ni@Fe(2)O(3) heterodimers became water soluble. The pristine heterodimeric NPs were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Mössbauer spectroscopy and magnetic susceptibility measurements. A special advantage of the heterodimers lies in the fact that nanodomains of different composition can be used as catalysts for the removal of environmentally hazardous halogenated pollutants.