Time dependent release of microplastics from disposable face masks poses cyto-genotoxic risks in Allium cepa.

The use of disposable face masks (DFMs) increased during the COVID-19 pandemic and has become a threat to the environment due to the release of microplastics (MPs). Although many reports have characterized and explored the release of MPs from DFMs and their effects in aquatic ecosystems, there is a lack of investigation into the effects in terrestrial plants. This report aims to fill this research gap by characterizing whole mask leachates (WMLs) collected at different time points and examining their toxicity on Allium cepa, a terrestrial model plant. Various analytical techniques including FE-SEM, FT-IR, and Raman spectroscopy were used to identify MPs in WMLs. The MPs are composed of polypropylene mostly and the concentration of smaller-sized MPs increased with leachate release time. The WMLs showed a MP concentration-dependent cytogenotoxic effect (72 %, 50 %, and 31 %, on 1, 5, and 11-day WMLs, respectively) on A. cepa root cells due to elevated oxidative stress (19 %, 45 %, and 70 %, on 1, 5, and 11-day WMLs, respectively). Heavy metal content of the WMLs was negligible and, thus, not a significant contributor to toxicity in the plant. Overall, this report highlights the fate of DFMs in the environment and their biological impacts in a model plant.

Biologically synthesized zinc and copper oxide nanoparticles using Cannabis sativa L. enhance soybean (Glycine max) defense against fusarium virguliforme.

In this study, zinc and copper oxide nanoparticles (NPs) were synthesized using hemp (Cannabis sativa L.) leaves (ZnONP-HL and CuONP-HL), and their antifungal potential was assessed against Fusarium virguliforme in soybean (Glycine max L.). Hemp was selected because it is known to contain large quantities of secondary metabolites that can potentially enhance the reactivity of NPs through surface property modification. Synthesizing NPs with biologically derived materials allows to avoid the use of harsh and expensive synthetic reducing and capping agents. The ZnONP-HL and CuONP-HL showed average grain/crystallite size of 13.51 nm and 7.36 nm, respectively. The biologically synthesized NPs compared well with their chemically synthesized counterparts (ZnONP chem, and CuONP chem; 18.75 nm and 10.05 nm, respectively), confirming the stabilizing role of hemp-derived biomolecules. Analysis of the hemp leaf extract and functional groups that were associated with ZnONP-HL and CuONP-HL confirmed the presence of terpenes, flavonoids, and phenolic compounds. Biosynthesized NPs were applied on soybeans as bio-nano-fungicides against F. virguliforme via foliar treatments. ZnONP-HL and CuONP-HL at 200 µg/mL significantly (p < 0.05) increased (∼ 50%) soybean growth, compared to diseased controls. The NPs improved the nutrient (e.g., K, Ca, P) content and enhanced photosynthetic indicators of the plants by 100-200%. A 300% increase in the expression of soybean pathogenesis related GmPR genes encoding antifungal and defense proteins confirmed that the biosynthesized NPs enhanced disease resistance against the fungal phytopathogen. The findings from this study provide novel evidence of systemic suppression of fungal disease by nanobiopesticides, via promoting plant defense mechanisms.

Influence of Single and Combined Mixtures of Metal Oxide Nanoparticles on Eggplant Growth, Yield, and Verticillium Wilt Severity.

Verticillium wilt, caused by Verticillium dahliae, is one of the major diseases of eggplants. Nanoparticles (NPs) of CuO, Mn2O3, and ZnO were sprayed alone onto leaves of young eggplants and in different combinations and rates, and then seedlings were transplanted into soil infested with V. dahliae in the greenhouse and field between 2015 and 2018. All combinations of NPs were consistently less effective than CuO NPs applied alone at 500 µg/ml at increasing disease suppression, biomass, and fruit yield. CuO NPs were associated with an increase in fruit yield (17 and 33% increase) and disease suppression (28 and 22% reduction) in 2016 and 2017, respectively, when compared with untreated controls. However, this effect was negated in the greenhouse and field experiments when CuO NPs were combined with Mn2O3. Combining NPs of CuO with ZnO resulted in variable effects; amendments increased growth and suppressed disease in greenhouse experiments, but results were mixed in the field. Leaf tissue analyses from the greenhouse experiments showed that Cu concentration in leaves was reduced when CuO NPs were combined with other NPs, even when application rates were the same amount. A simple competition for entry sites may explain why combinations of CuO NPs and Mn2O3 NPs reduced efficacy but does not explain the lack of inhibition between Cu and Zn. NPs of CuO performed better than their larger bulk equivalent, and studies on application rate found 500 µg/ml was optimal. No phytotoxicity, as determined, by leaf burning, necrotic spots, or dead apical buds was noted even at the highest combined rates of 1,500 µg/ml.

Effect of Metalloid and Metal Oxide Nanoparticles on Fusarium Wilt of Watermelon.

This study explored the use of foliar sprays with nanoparticles (NP) of B, CuO, MnO, SiO, TiO, and ZnO to protect watermelon against Fusarium wilt. Leaves of young watermelon plants were sprayed (1 to 2 ml per plant) with NP suspensions (500 to 1,000 µg/ml) and were planted in potting mix infested with Fusarium oxysporum f. sp. niveum. In five of eight greenhouse experiments, CuO NP suppressed disease and, in six of eight experiments, CuO NP increased biomass or yield more than in untreated controls or other tested NP. More root Cu was detected in CuO NP-treated plants than other treatments (P = 0.015). In Griswold, CT, plants treated with CuO NP yielded 39% more fruit than untreated controls. In Hamden, CT, treatment with CuO NP produced 53% more fruit when compared with controls (P = 0.02) and was superior to other Cu fungicides. Gene expression in watermelon roots revealed strong upregulation of polyphenol oxidase (PPO) and PR1 genes when CuO NP and F. oxysporum f. sp. niveum were both present. Enzymatic assays for PPO supported the gene expression results. CuO NP may serve as a highly effective delivery agent for this micronutrient to suppress disease.

The phytotoxicity of ZnO nanoparticles on wheat varies with soil properties.

Zn is an essential element for plants yet some soils are Zn-deficient and/or have low Zn-bioavailability. This paper addresses the feasibility of using ZnO nanoparticles (NPs) as soil amendments to improve Zn levels in the plant. The effects of soil properties on phytotoxicity and Zn bioavailability from the NPs were studied by using an acidic and a calcareous alkaline soil. In the acid soil, the ZnO NPs caused dose-dependent phytotoxicity, observed as inhibition of elongation of roots of wheat, Triticum aestivum. Phytotoxicity was mitigated in the calcareous alkaline soil although uptake of Zn from the ZnO NPs occurred doubling the Zn level compared to control plants. This increase occurred with a low level of Zn in the soil solution as expected from the interactions of Zn with the soil components at the alkaline pH. Soluble Zn in the acid soil was 200-fold higher and shoot levels were tenfold higher than from the alkaline soil correlating with phytotoxicity. Mitigation of toxicity was not observed in plants grown in sand amended with a commercial preparation of humic acid: growth, shoot uptake and solubility of Zn from the NPs was not altered by the humic acid. Thus, variation in humic acid between soils may not be a major factor influencing plant responses to the NPs. These findings illustrate that formulations of ZnO NPs to be used as a soil amendment would need to be tuned to soil properties to avoid phytotoxicity yet provide increased Zn accumulations in the plant.

Nano-CuO and interaction with nano-ZnO or soil bacterium provide evidence for the interference of nanoparticles in metal nutrition of plants.

The expansion of nanotechnology raises concerns about the consequences of nanomaterials in plants. Here, the effects of nanoparticles (NPs; 100-500 mg/kg) on processes related to micronutrient accumulation were evaluated in bean (Phaseolus vulgaris) exposed to CuO NPs, a mixture of CuO and ZnO (CuO:ZnO) NPs, and in CuO NP-exposed plants colonized by a root bacterium, Pseudomonas chlororaphis O6 (PcO6) in a sand matrix for 7 days. Depending on exposure levels, the inhibition of growth by CuO NPs was more apparent in roots (10-66 %) than shoots (9-25 %). In contrast, CuO:ZnO NPs or root colonization with PcO6 partially mitigated growth inhibition. At 500 mg/kg exposure, CuO NPs increased soluble Cu in the growth matrix by 23-fold, relative to the control, while CuO:ZnO NPs increased soluble Cu (26-fold), Zn (127-fold) and Ca (4.5-fold), but reduced levels of Fe (0.8-fold) and Mn (0.75-fold). Shoot accumulations of Cu (3.8-fold) and Na (1-fold) increased, while those of Fe (0.4-fold), Mn (0.2-fold), Zn (0.5-fold) and Ca (0.5-fold) were reduced with CuO NP (500 mg/kg) exposure. CuO:ZnO NPs also increased shoot Cu, Zn and Na levels, while decreasing that of Fe, Mn, Ca and Mg. Root colonization reduced shoot uptake of Cu and Na, 15 and 24 %, respectively. CuO NPs inhibited ferric reductase (up to 49 %) but stimulated cupric (up to 273 %) reductase activity; while CuO:ZnO NPs or root colonization by PcO6 altered levels of ferric, but not copper reductase activity, relative to CuO NPs. Cu ions at the level released from the NPs did not duplicate these effects. Our findings demonstrate that in addition to the apparent phytotoxic effects of NPs, NP exposure may also have subtle impacts on secondary processes such as metal nutrition.

Pesticidal activity of metal oxide nanoparticles on plant pathogenic isolates of Pythium.

CuO and ZnO nanoparticles (NPs) have antimicrobial effects that could lead to formulations as pesticides for agriculture or medicine. The responses of two soil-borne plant pathogenic Pythium isolates to the NPs were studied to determine the potential of these metal oxide NPs as pesticides. Growth of the P. ultimum isolate was more sensitive to CuO NPs than the P. aphanidermatum isolate. Growth in liquid medium with CuO NPs eliminated culturability whereas exposure to ZnO NPs resulted in stasis with growth resuming on transfer to medium lacking NPs. The citrate in the medium used for the growth assays was involved in enhanced release of the toxic metals from the NPs. Both CuO and ZnO NPs affected processes involved in Fe uptake. The NPs reduced levels of Fe-chelating siderophore-like metabolites produced by Pythium hyphae. CuO NPs inhibited, but ZnO NPs increased, ferric reductase activity detected at the mycelial surface. These findings illustrate that the toxicity of the metal oxide NPs towards Pythium was influenced by the medium, especially by the presence of a metal chelator. Environmental factors are likely to alter the pesticide potential of the metal oxide NPs when formulated for agricultural use in soils.

Can nanotechnology deliver the promised benefits without negatively impacting soil microbial life?

Nanotechnology exploits the enhanced reactivity of materials at the atomic scale to improve various applications for humankind. In agriculture, potential nanotechnology applications include crop protection and fertilization. However, such benefits could come with risks for the environment: non-target plants, plant-beneficial soil microbes and other life forms could be impacted if nanoparticles (nanomaterials) contaminate the environment. This review evaluates the impact of the major metallic nanoparticles (Ag, ZnO, CuO, CeO2 , TiO2 , and FeO-based nanoparticles) on soil microbes involved in agricultural processes. The current literature indicate that in addition to population and organismal-scale effects on microbes, other subtle impacts of nanoparticles are seen in the nitrogen cycle, soil enzyme activities, and processes involved in iron metabolism, phytohormone, and antibiotic production. These effects are negative or positive, the outcome being dependent on specific nanoparticles. Collectively, published results suggest that nanotechnology portends considerable, many negative, implications for soil microbes and, thus, agricultural processes that are microbially driven. Nonetheless, the potential of plant and soil microbial processes to mitigate the bioreactivity of nanoparticles also are observed. Whereas the roots of most terrestrial plants are associated with microbes, studies of nanoparticle interactions with plants and microbes are generally conducted separately. The few studies in actual microbe-plant systems found effects of nanoparticles on the functioning of arbuscular mycorrhizal fungi, nitrogen fixation, as well as on the production of microbial siderophores in the plant rhizosphere. It is suggested that a better understanding of the agro-ecological ramifications of nanoparticles would require more in-depth interactive studies in combined plant-microbe-nanoparticle systems.

Green Synthesis and Characterization of Ginger-Derived Silver Nanoparticles and Evaluation of Their Antioxidant, Antibacterial, and Anticancer Activities.

The efficacy, targeting ability, and biocompatibility of plant-based nanoparticles can be exploited in fields such as agriculture and medicine. This study highlights the use of plant-based ginger nanoparticles as an effective and promising strategy against cancer and for the treatment and prevention of bacterial infections and related disorders. Ginger is a well-known spice with significant medicinal value due to its phytochemical constituents including gingerols, shogaols, zingerones, and paradols. The silver nanoparticles (AgNPs) derived from ginger extracts could be an important non-toxic and eco-friendly nanomaterial for widespread use in medicine. In this study, AgNPs were biosynthesized using an ethanolic extract of ginger rhizome and their phytochemical, antioxidant, antibacterial, and cytotoxic properties were evaluated. UV-visible spectral analysis confirmed the formation of spherical AgNPs. FTIR analysis revealed that the NPs were associated with various functional biomolecules that were associated with the NPs during stabilization. The particle size and SEM analyses revealed that the AgNPs were in the size range of 80-100 nm, with a polydispersity index (PDI) of 0.510, and a zeta potential of -17.1 mV. The purity and crystalline nature of the AgNPs were confirmed by X-ray diffraction analysis. The simple and repeatable phyto-fabrication method reported here may be used for scaling up for large-scale production of ginger-derived NPs. A phytochemical analysis of the ginger extract revealed the presence of alkaloids, glycosides, flavonoids, phenolics, tannins, saponins, and terpenoids, which can serve as active biocatalysts and natural stabilizers of metallic NPs. The ginger extracts at low concentrations demonstrated promising cytotoxicity against Vero cell lines with a 50% reduction in cell viability at 0.6-6 µg/mL. When evaluated for biological activity, the AgNPs exhibited significant antioxidant and antibacterial activity on several Gram-positive and Gram-negative bacterial species, including Escherichia coli, Bacillus subtilis, Pseudomonas aeruginosa, and Staphylococcus aureus. This suggests that the AgNPs may be used against multi-drug-resistant bacteria. Ginger-derived AgNPs have a considerable potential for use in the development of broad-spectrum antimicrobial and anticancer medications, and an optimistic perspective for their use in medicine and pharmaceutical industry.

Mitigation of Nitrogen Losses in a Plant-Soil System through Incorporation of Nanocellulose and Zinc-Modified Nanocellulose.

Most nitrogen (N) applied to plants as fertilizer is lost through leaching. Here, nanocellulose was used in mitigating N leaching loss. Lettuce-cropped soil was treated with unmodified or Zn-modified nanocellulose (1-2% by wt) in combination with NPK, compared with urea and NPK-only treatments. Consecutive leaching, plant growth, plant N uptake, and soil nitrogen retention were assessed. Nanocellulose + NPK significantly (p ≤ 0.05) reduced N leaching, compared with urea and NPK-only. 1-and-2 wt % nanocellulose, as well as Zn-modified 1-and-2 wt % nanocellulose, reduced N leaching by 45, 38, 39, and 49% compared with urea and by 43, 36, 37, and 47% compared with NPK-only, respectively. Nitrogen leached mainly as NO3- (98.4%). Compared with urea and NPK, lettuce shoot mass was significantly (p ≤ 0.05) increased by 30-42% and by 44-57%, respectively, by all nanocellulose treatments, except for the Zn-modified 1 wt % nanocellulose. Leached N negatively correlated to biomass yield. Soil N retention was enhanced by the pristine and Zn-modified nanocelluloses between 27 and 94%. Demonstrably, nanocellulose can be utilized for mitigating N loss in soil and supporting crop production, resource management, and environmental sustainability.

PFAS remediation in soil: An evaluation of carbon-based materials for contaminant sequestration.

The presence of per- and poly-fluoroalkyl substances (PFAS) in soils is a global concern as these emerging contaminants are highly resistant to degradation and cause adverse effects on human and environmental health at very low concentrations. Sequestering PFAS in soils using carbon-based materials is a low-cost and effective strategy to minimize pollutant bioavailability and exposure, and may offer potential long-term remediation of PFAS in the environment. This paper provides a comprehensive evaluation of current insights on sequestration of PFAS in soil using carbon-based sorbents. Hydrophobic effects originating from fluorinated carbon (C-F) backbone "tail" and electrostatic interactions deriving from functional groups on the molecules' "head" are the two driving forces governing PFAS sorption. Consequently, varying C-F chain lengths and polar functional groups significantly alter PFAS availability and leachability. Furthermore, matrix parameters such as soil organic matter, inorganic minerals, and pH significantly impact PFAS sequestration by sorbent amendments. Materials such as activated carbon, biochar, carbon nanotubes, and their composites are the primary C-based materials used for PFAS adsorption. Importantly, modifying the carbon structural and surface chemistry is essential for increasing the active sorption sites and for strengthening interactions with PFAS. This review evaluates current literature, identifies knowledge gaps in current remediation technologies and addresses future strategies on the sequestration of PFAS in contaminated soil using sustainable novel C-based sorbents.

Compliance Testing of Hemp (Cannabis sativa L.) Cultivars for Total Delta-9 THC and Total CBD Using Gas Chromatography with Flame Ionization Detection.

The United States Agriculture Improvement Act passed in December of 2018 legalized the growing of Cannabis sativa containing not more than 0.3% total Delta-9 tetrahydrocannabinol (THC) in the country. While Cannabis sativa has been cultivated for hundreds of years, the illegal status of the plant in the United States, and elsewhere, has hindered the development of plant cultivars that meet this legal definition. To assess sampling strategies, and conformance to the THC limit, 14 cultivars of hemp were grown and tested by using gas chromatography with flame ionization detection for total delta-9 THC and total cannabidiol (CBD) during 2020, 2021 and 2022. Each year, samples of fresh plant material were collected from each cultivar weekly, beginning in mid-August and ending in late October, to examine the rate of increase in THC and CBD for different cultivars and select individual plants. The sampling demonstrated that both CBD and THC increase rapidly over a 1-2-week time frame with maximum concentrations (about 16% and 0.6%, respectively) around late September to early October. The testing of individual plants on the same day for select cultivars showed that while the ratio of CBD to THC remains constant (about 20:1 in compliant hemp) during the growing season, the individual plants are highly variable in concentration. Whereas previous studies have shown cultivar-dependent variability in THC production, this study demonstrated a novel plant-to-plant variability in the levels of THC within the same hemp cultivar. Understanding variability within and between hemp cultivars is useful to determine field sampling strategies and to assess the risk of crop embargoes to growers by compliance regulators.

Nanotechnology in agriculture: A solution to global food insecurity in a changing climate?

Although the Green Revolution dramatically increased food production, it led to non- sustainable conventional agricultural practices, with productivity in general declining over the last few decades. Maintaining food security with a world population exceeding 9 billion in 2050, a changing climate, and declining arable land will be exceptionally challenging. In fact, nothing short of a revolution in how we grow, distribute, store, and consume food is needed. In the last ten years, the field of nanotoxicology in plant systems has largely transitioned to one of sustainable nano-enabled applications, with recent discoveries on the use of this advanced technology in agriculture showing tremendous promise. The range of applications is quite extensive, including direct application of nanoscale nutrients for improved plant health, nutrient biofortification, increased photosynthetic output, and greater rates of nitrogen fixation. Other applications include nano-facilitated delivery of both fertilizers and pesticides; nano-enabled delivery of genetic material for gene silencing against viral pathogens and insect pests; and nanoscale sensors to support precision agriculture. Recent efforts have demonstrated that nanoscale strategies increase tolerance to both abiotic and biotic stressors, offering realistic potential to generate climate resilient crops. Considering the efficiency of nanoscale materials, there is a need to make their production more economical, alongside efficient use of incumbent resources such as water and energy. The hallmark of many of these approaches involves much greater impact with far less input of material. However, demonstrations of efficacy at field scale are still insufficient in the literature, and a thorough understanding of mechanisms of action is both necessary and often not evident. Although nanotechnology holds great promise for combating global food insecurity, there are far more ways to do this poorly than safely and effectively. This review summarizes recent work in this space, calling out existing knowledge gaps and suggesting strategies to alleviate those concerns to advance the field of sustainable nano-enabled agriculture.

Copper Stimulation of Tetrahydrocannabinol and Cannabidiol Production in Hemp (Cannabis sativa L.) Is Copper-Type, Dose, and Cultivar Dependent.

Copper (Cu) is an element widely used as a pesticide for the control of plant diseases. Cu is also known to influence a range of plant secondary metabolisms. However, it is not known whether Cu influences the levels of the major metabolites in hemp (Cannabis sativa L.), tetrahydrocannabinol (THC) and cannabidiol (CBD). This study investigated the impact of Cu on the levels of these cannabinoids in two hemp cultivars, Wife and Merlot, under field conditions, as a function of harvest time (August-September), Cu type (nano, bulk, or ionic), and dose (50, 100, and 500 ppm). In Wife, Cu caused significant temporal increases in THC and CBD production during plant growth, reaching increases of 33% and 31% for THC and 51% and 16.5% for CBD by harvests 3 and 4, respectively. CuO nanoparticles at 50 and 100 ppm significantly increased THC and CBD levels, compared to the control, respectively, by 18% and 27% for THC and 19.9% and 33.6% for CBD. These nanospecific increases coincided with significantly more Cu in the inflorescences (buds) than in the control and bulk CuO treatments. Contrarily, no temporal induction of the cannabinoids by Cu was noticed in Merlot, suggesting a cultivar-specific response to Cu. However, overall, in Merlot, Cu ions, but not particulate Cu, induced THC and CBD levels by 27% and 36%, respectively, compared to the control. Collectively, our findings provide information with contrasting implications in the production of these cannabinoids, where, dependent on the cultivar, metabolite levels may rise above the 0.3% regulatory threshold for THC but to a more profitable level for CBD. Further investigations with a wider range of hemp cultivars, CuO nanoparticle (NP) doses, and harvest times would clarify the significance and broader implications of the findings.

Time-Dependent and Coating Modulation of Tomato Response upon Sulfur Nanoparticle Internalization and Assimilation: An Orthogonal Mechanistic Investigation.

Nanoenabled strategies have recently attracted attention as a sustainable platform for agricultural applications. Here, we present a mechanistic understanding of nanobiointeraction through an orthogonal investigation. Pristine (nS) and stearic acid surface-modified (cS) sulfur nanoparticles (NPs) as a multifunctional nanofertilizer were applied to tomato (Solanum lycopersicumL.) through soil. Both nS and cS increased root mass by 73% and 81% and increased shoot weight by 35% and 50%, respectively, compared to the untreated controls. Bulk sulfur (bS) and ionic sulfate (iS) had no such stimulatory effect. Notably, surface modification of S NPs had a positive impact, as cS yielded 38% and 51% greater shoot weight compared to nS at 100 and 200 mg/L, respectively. Moreover, nS and cS significantly improved leaf photosynthesis by promoting the linear electron flow, quantum yield of photosystem II, and relative chlorophyll content. The time-dependent gene expression related to two S bioassimilation and signaling pathways showed a specific role of NP surface physicochemical properties. Additionally, a time-dependent Global Test and machine learning strategy applied to understand the NP surface modification domain metabolomic profiling showed that cS increased the contents of IA, tryptophan, tomatidine, and scopoletin in plant leaves compared to the other treatments. These findings provide critical mechanistic insights into the use of nanoscale sulfur as a multifunctional soil amendment to enhance plant performance as part of nanoenabled agriculture.

Silver nanoparticles disrupt wheat (Triticum aestivum L.) growth in a sand matrix.

Hydroponic plant growth studies indicate that silver nanoparticles (Ag NPs) are phytotoxic. In this work, the phytotoxicity of commercial Ag NPs (10 nm) was evaluated in a sand growth matrix. Both NPs and soluble Ag were recovered from water extracts of the sand after growth of plants challenged with the commercial product; the surface charge of the Ag NPs in this extract was slightly reduced compared to the stock NPs. The Ag NPs reduced the length of shoots and roots of wheat in a dose-dependent manner. Furthermore, 2.5 mg/kg of the NPs increased branching in the roots of wheat (Triticum aestivum L.), thereby affecting plant biomass. Micron-sized (bulk) Ag particles (2.5 mg/kg) as well as Ag ions (63 µg Ag/kg) equivalent to the amount of soluble Ag in planted sand with Ag NPs (2.5 mg/kg) did not affect plant growth compared to control. In contrast, higher levels of Ag ions (2.5 mg/kg) reduced plant growth to a similar extent as the Ag NPs. Accumulation of Ag was detected in the shoots, indicating an uptake and transport of the metal from the Ag NPs in the sand. Transmision electron microscopy indicated that Ag NPs were present in shoots of plants with roots exposed to the Ag NPs or high levels of Ag ions. Both of these treatments caused oxidative stress in roots, as indicated by accumulation of oxidized glutathione, and induced expression of a gene encoding a metallothionein involved in detoxification by metal ion sequestration. Our findings demonstrate the potential effects of environmental contamination by Ag NPs on the metabolism and growth of food crops in a solid matrix.

Fate of CuO and ZnO nano- and microparticles in the plant environment.

The environmental fate of metal oxide particles as a function of size was assessed by comparing the behavior of CuO or ZnO nanoparticles (NPs) to that of the corresponding microparticles (MPs) in a sand matrix, with and without wheat (Triticum aestivum L.) growth. After 14 days of incubation in the planted sand, the CuO and ZnO NPs were increased from their nominal sizes of <50 nm and <100 nm, to ~317 nm and ~483 nm, respectively. Accordingly, the negative surface charge of colloids present in aqueous extracts from the sand amended with CuO (-27.0 mV) and ZnO (-10.0 mV) NPs was reduced by the presence of plants, to -19.8 mV and -6.0 mV, respectively. The surface charge of the MPs was not influenced by plants. Plant growth increased dissolution of NPs and MPs of both metal oxides in the sand from <0.3 mg/kg to about 1.0 mg/kg for the CuO products, and from ≤0.6 mg/kg to between 1.0 and 2.2 mg/kg for the Zn products. The NP or MP products reduced wheat root length by ~60% or ~50% from control levels; CuO was more toxic than ZnO. X-ray absorption spectroscopy (XAS) analysis showed that treatments with MPs or NPs of ZnO led to similar accumulations of Zn-phosphate species in the shoots, likely from dissolution of ZnO. Exposure to CuO NPs or MPs resulted in similar XAS spectra for Cu in the shoots explained by plant accumulation of both CuO and Cu(I)-sulfur complexes. These findings demonstrate the similarities between commercial NPs and MPs of CuO or ZnO in wheat plants, with greater root toxicity correlating with smaller particle size. Factors from the sand and the plant modified the aggregation or dissolution of both types of particles, thus, influencing their environmental fates.

Antifungal activity of ZnO nanoparticles and their interactive effect with a biocontrol bacterium on growth antagonism of the plant pathogen Fusarium graminearum.

Fungal plant pathogens such as Fusarium graminearum cause severe global economic losses in cereals crops, and current control measures are limited. This work addresses the potential for ZnO nanoparticles (NPs) and biocontrol bacteria to be used in plant fungal control strategies. Growth of F. graminearum was significantly (p = 0.05) inhibited by inclusion of the NPs in a mung bean broth agar and in sand. Suspension in mung bean broth medium modified the surface charge, dissolution, and aggregation state of the ZnO NPs, in comparison to processes occurring in water suspension. The ZnO NPs were significantly more inhibitory to fungal growth than micro-sized particles of ZnO, although both types of particles released similar levels of soluble Zn, indicating size-dependent toxicity of the particles. Zn ions produced dose-dependent inhibition, noticeable at the level of soluble Zn released from NPs after seven-day suspension in medium; inhibitory levels caused acidification of the growth medium. Transfer of fungal inoculum after exposure to the ZnO NPs to fresh medium did not indicate adaptation to the stress because growth was still inhibited by the NPs. The ZnO NPs did not prevent metabolites from a biocontrol bacterium, Pseudomonas chlororaphis O6, from inhibiting Fusarium growth: no synergism was observed in the mung bean agar. Because other studies find that soil amendment with ZnO NPs required high doses for inhibition of plant growth, the findings of pathogen growth control reported in this paper open the possibility of using ZnO NP-based formulations to complement existing strategies for improving crop health in field settings.

The GacS-regulated sigma factor RpoS governs production of several factors involved in biocontrol activity of the rhizobacterium Pseudomonas chlororaphis O6.

Pseudomonas chlororaphis O6 possesses many beneficial traits involved in biocontrol of plant diseases. In this paper, we examined the effect of a mutation in rpoS encoding a stress-related alternative sigma factor to better understand the regulation of these traits. Biochemical studies indicated that production of acyl homoserine lactones was altered and phenazine was increased in the P. chlororaphis O6 rpoS mutant. The rpoS mutation reduced hydrogen cyanide levels, but the rpoS mutant still displayed a level of in vitro antifungal activity against Fusarium graminearum and Alternaria alternata. Tomato root colonization by the rpoS mutant was lower than that by the wild type at 5, 7, and 13 days after inoculation. The rpoS mutant was less effective than the wild type in induction of systemic resistance to two foliar pathogens after root inoculation of the tomato plants. Our findings demonstrate that the stationary-phase sigma factor RpoS regulates production of several key factors involved in the biocontrol potential of P. chlororaphis O6, some independently of the global regulator GacS.