Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 27
Filtrar
1.
Proc Natl Acad Sci U S A ; 119(37): e2121848119, 2022 Sep 13.
Artigo em Inglês | MEDLINE | ID: mdl-36067324

RESUMO

Refractory carbides are attractive candidates for support materials in heterogeneous catalysis because of their high thermal, chemical, and mechanical stability. However, the industrial applications of refractory carbides, especially silicon carbide (SiC), are greatly hampered by their low surface area and harsh synthetic conditions, typically have a very limited surface area (<200 m2 g-1), and are prepared in a high-temperature environment (>1,400 °C) that lasts for several or even tens of hours. Based on Le Chatelier's principle, we theoretically proposed and experimentally verified that a low-pressure carbothermal reduction (CR) strategy was capable of synthesizing high-surface area SiC (569.9 m2 g-1) at a lower temperature and a faster rate (∼1,300 °C, 50 Pa, 30 s). Such high-surface area SiC possesses excellent thermal stability and antioxidant capacity since it maintained stability under a water-saturated airflow at 650 °C for 100 h. Furthermore, we demonstrated the feasibility of our strategy for scale-up production of high-surface area SiC (460.6 m2 g-1), with a yield larger than 12 g in one experiment, by virtue of an industrial viable vacuum sintering furnace. Importantly, our strategy is  also applicable to the rapid synthesis of refractory metal carbides (NbC, Mo2C, TaC, WC) and even their emerging high-entropy carbides (VNbMoTaWC5, TiVNbTaWC5). Therefore, our low-pressure CR method provides an alternative strategy, not merely limited to temperature and time items, to regulate the synthesis and facilitate the upcoming industrial applications of carbide-based advanced functional materials.

2.
Small ; 19(8): e2206167, 2023 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-36504426

RESUMO

Broadband infrared (IR) absorption is sought after for wide range of applications. Graphene can support IR plasmonic waves tightly bound to its surface, leading to an intensified near-field. However, the excitation of graphene plasmonic waves usually relies on resonances. Thus, it is still difficult to directly obtain both high near-field intensity and high absorption rate in ultra-broad IR band. Herein, a novel method is proposed to directly realize high near-field intensity in broadband IR band by graphene coated manganous oxide microwires featured hierarchical nanostructures (HNSs-MnO@Gr MWs) both experimentally and theoretically. Both near-field intensity and IR absorption of HNSs-MnO@Gr MWs are enhanced by at least one order of magnitude compared to microwires with smooth surfaces. The results demonstrate that the HNSs-MnO@Gr MWs support vibrational sensing of small organic molecules, covering the whole fingerprint region and function group region. Compared with the graphene-flake-based enhancers, the signal enhancement factors reach a record high of 103 . Furthermore, just a single HNSs-MnO@Gr MW can be constructed to realize sensitively photoresponse with high responsivity (over 3000 V W-1 ) from near-IR to mid-IR. The graphene coated dielectric hierarchical micro/nanoplatform with enhanced near-field intensity is scalable and can harness for potential applications including spectroscopy, optoelectronics, and sensing.

3.
Anal Chem ; 94(12): 5041-5047, 2022 03 29.
Artigo em Inglês | MEDLINE | ID: mdl-35294191

RESUMO

Atomic force microscopy (AFM) provides unprecedented insight into surface topography research with ultrahigh spatial resolution at the subnanometer level. However, a slow scanning rate has to be employed to ensure the image quality, which will largely increase the accumulated sample drift, thereby, resulting in the low fidelity of the AFM image. In this paper, we propose a fast imaging method which performs a complete fast Raster scanning and a slow µ-path subsampling together with a deep learning algorithm to rapidly produce an AFM image with high quality and small drift. A supervised convolutional neural network (CNN) model is trained with the slow µ-path subsampled data and its counterpart acquired with fast Raster scan. The fast speed acquired AFM image is then inputted to the well-trained CNN model to output the high quality one. We validate the reliability of this method using a silicon grids sample and further apply it to the fast imaging of a vanadium dioxide thin film. The results demonstrate that this method can largely improve the imaging speed up to 10.3 times with state-of-the-art imaging quality, and reduce the sample drift by 8.9 times in the multiframe AFM imaging of the same area. Furthermore, we prove that this method is also applicable to other scanning imaging techniques such as scanning electrochemical microscopy.


Assuntos
Algoritmos , Redes Neurais de Computação , Microscopia de Força Atômica/métodos , Reprodutibilidade dos Testes
4.
J Am Chem Soc ; 143(40): 16512-16518, 2021 Oct 13.
Artigo em Inglês | MEDLINE | ID: mdl-34601870

RESUMO

Heterojunction nanostructures usually exhibit enhanced properties in compariosn with their building blocks and are promising catalyst candidates due to their combined surface and unique interface. Here, for the first time we realized the oriented growth of ultrasmall metal nanoparticles (NPs) on metal-organic framework nanosheets (MOF NSs) by precisely regulating the reduction kinetics of metal ions with solvents. In particular, a rapid reduction of metal ions leads to the random distribution of metal NPs on the surface of MOF NSs, while a slow reduction of metal ions results in the oriented growth of NPs on the edge of MOF NSs. Impressively, the strong synergy between Pt NPs and MOF NSs significantly enhances the hydrogen evolution reaction (HER) performance, and the optimal catalyst displays HER activities superior to those of a composite with a random growth of Pt NPs and commercial Pt/C under both acidic and alkaline conditions. Moreover, the versatility of such oriented growth has been extended to other metal NPs, such as Pd, Ag, and Au. We believe this work will promote research interest in material design for many potential applications.

5.
Angew Chem Int Ed Engl ; 60(20): 11190-11195, 2021 May 10.
Artigo em Inglês | MEDLINE | ID: mdl-33694245

RESUMO

Two-dimensional (2D) metal-organic framework nanosheets (MOF NSs) play a vital role in catalysis, but the most preparation is ultrasonication or solvothermal. Herein, a liquid-liquid interfacial synthesis method has been developed for the efficient fabrication of a series of 2D Ni MOF NSs. The active sites could be modulated by readily tuning the ratios of metal precursors and organic linkers (RM/L ). The Ni MOF NSs display highly RM/L dependent activities towards 2e oxygen reduction reaction (ORR) to hydrogen peroxide (H2 O2 ), where the Ni MOF NSs with the RM/L of 6 exhibit the optimal near-zero overpotential, ca. 98 % H2 O2 selectivity and production rate of ca. 80 mmol gcat -1 h-1 in 0.1 M KOH. As evidenced by X-ray absorption fine structure spectroscopy, the coordination environment of active sites changed from saturation to unsaturation, and the partially unsaturated metal atoms are crucial to create optimal sites for enhancing the electrocatalysis.

6.
J Am Chem Soc ; 142(20): 9439-9446, 2020 May 20.
Artigo em Inglês | MEDLINE | ID: mdl-32338907

RESUMO

Knowledge of atomistic structures at solid/liquid interfaces is essential to elucidate interfacial processes in chemistry, physics, and materials sciences. The (√3 × âˆš7) structure associated with a pair of sharp reversible current spikes in the cyclic voltammogram on a Au(111) electrode in sulfuric acid solution represents one of the most classical ordered structures at electrode/electrolyte interfaces. Although more than 10 adsorption configurations have been proposed in the past four decades, the atomistic structure remains ambiguous and is consequently an open problem in electrochemistry and surface science. Herein, by combining high-resolution electrochemical scanning tuning microscopy, electrochemical infrared and Raman spectroscopies, and, in particular, the newly developed quantitative computational method for electrochemical infrared and Raman spectra, we unambiguously reveal that the adstructure is Au(111)(√3 × âˆš7)-(SO4···w2) with a sulfate anion (SO4*) and two structured water molecules (w2*) in a unit cell, and the crisscrossed [w···SO4···w]n and [w···w···]n hydrogen-bonding network comprises the symmetric adstructure. We further elucidate that the electrostatic potential energy dictates the proton affinity of sulfate anions, leading to the potential-tuned structural transformations. Our work enlightens the structural details of the inner Helmholtz plane and thus advances our fundamental understanding of the processes at electrochemical interfaces.

7.
Angew Chem Int Ed Engl ; 59(35): 15226-15231, 2020 Aug 24.
Artigo em Inglês | MEDLINE | ID: mdl-32424964

RESUMO

A surface-enhanced Raman scattering-chiral anisotropy (SERS-ChA) effect is reported that combines chiral discrimination and surface Raman scattering enhancement on chiral nanostructured Au films (CNAFs) equipped in the normal Raman scattering Spectrometer. The CNAFs provided remarkably higher enhancement factors of Raman scattering (EFs) for particular enantiomers, and the SERS intensity was proportional to the enantiomeric excesses (ee) values. Except for molecules with mesomeric species, all of the tested enantiomers exhibited high SERS-ChA asymmetry factors (g), ranging between 1.34 and 1.99 regardless of polarities, sizes, chromophores, concentrations and ee. The effect might be attributed to selective resonance coupling between the induced electric and magnetic dipoles associated with enantiomers and chiral plasmonic modes of CNAFs.

8.
Chem Rev ; 117(7): 5002-5069, 2017 Apr 12.
Artigo em Inglês | MEDLINE | ID: mdl-28271881

RESUMO

Core-shell nanoparticles are at the leading edge of the hot research topics and offer a wide range of applications in optics, biomedicine, environmental science, materials, catalysis, energy, and so forth, due to their excellent properties such as versatility, tunability, and stability. They have attracted enormous interest attributed to their dramatically tunable physicochemical features. Plasmonic core-shell nanomaterials are extensively used in surface-enhanced vibrational spectroscopies, in particular, surface-enhanced Raman spectroscopy (SERS), due to the unique localized surface plasmon resonance (LSPR) property. This review provides a comprehensive overview of core-shell nanoparticles in the context of fundamental and application aspects of SERS and discusses numerous classes of core-shell nanoparticles with their unique strategies and functions. Further, herein we also introduce the concept of shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) in detail because it overcomes the long-standing limitations of material and morphology generality encountered in traditional SERS. We then explain the SERS-enhancement mechanism with core-shell nanoparticles, as well as three generations of SERS hotspots for surface analysis of materials. To provide a clear view for readers, we summarize various approaches for the synthesis of core-shell nanoparticles and their applications in SERS, such as electrochemistry, bioanalysis, food safety, environmental safety, cultural heritage, materials, catalysis, and energy storage and conversion. Finally, we exemplify about the future developments in new core-shell nanomaterials with different functionalities for SERS and other surface-enhanced spectroscopies.

9.
Chem Soc Rev ; 46(13): 4042-4076, 2017 Jul 07.
Artigo em Inglês | MEDLINE | ID: mdl-28660954

RESUMO

Surface-enhanced Raman spectroscopy (SERS) and related spectroscopies are powered primarily by the concentration of the electromagnetic (EM) fields associated with light in or near appropriately nanostructured electrically-conducting materials, most prominently, but not exclusively high-conductivity metals such as silver and gold. This field concentration takes place on account of the excitation of surface-plasmon (SP) resonances in the nanostructured conductor. Optimizing nanostructures for SERS, therefore, implies optimizing the ability of plasmonic nanostructures to concentrate EM optical fields at locations where molecules of interest reside, and to enhance the radiation efficiency of the oscillating dipoles associated with these molecules and nanostructures. This review summarizes the development of theories over the past four decades pertinent to SERS, especially those contributing to our current understanding of SP-related SERS. Special emphasis is given to the salient strategies and theoretical approaches for optimizing nanostructures with hotspots as efficient EM near-field concentrating and far-field radiating substrates for SERS. A simple model is described in terms of which the upper limit of the SERS enhancement can be estimated. Several experimental strategies that may allow one to approach, or possibly exceed this limit, such as cascading the enhancement of the local and radiated EM field by the multiscale EM coupling of hierarchical structures, and generating hotspots by hybridizing an antenna mode with a plasmonic waveguide cavity mode, which would result in an increased local field enhancement, are discussed. Aiming to significantly broaden the application of SERS to other fields, and especially to material science, we consider hybrid structures of plasmonic nanostructures and other material phases and strategies for producing strong local EM fields at desired locations in such hybrid structures. In this vein, we consider some of the numerical strategies for simulating the optical properties and consequential SERS performance of particle-on-substrate systems that might guide the design of SERS-active systems. Finally, some current theoretical attempts are briefly discussed for unifying EM and non-EM contribution to SERS.

10.
Faraday Discuss ; 205: 457-468, 2017 12 04.
Artigo em Inglês | MEDLINE | ID: mdl-28885636

RESUMO

After surface-enhanced Raman spectroscopy (SERS) was initiated over four decades ago, its practical application seems to be far behind the fundamental research that has made tremendous progress. SERS as a highly sensitive technique has not been widely adopted by the materials science and surface science communities or in the market of analytical instruments. In this discussion, we first classify the previous approaches along this direction over the past four decades and divide them into three strategies. Based on our recent theoretical and experimental approaches, we discuss in more detail the third strategy related to shell-isolated nanostructures. It can significantly expand the SERS study on nontraditional SERS-active (i.e. weakly SERS-active) materials (e.g. Pt, Ni, Fe, etc.) and even SERS-inactive materials (e.g. Si and Al2O3). We then focus on a single shell-isolated nanoparticle and how to controllably locate the strong electromagnetic field just at the probe surface of various materials. The use of side illumination at a high incident angle and/or nanocubes can further enhance the Raman signal by one to two orders of magnitude, which could be helpful for quantitative studies for surface science, heterogeneous catalysis, and soft matter science.

11.
J Am Chem Soc ; 137(18): 5923-9, 2015 May 13.
Artigo em Inglês | MEDLINE | ID: mdl-25894840

RESUMO

We report an electrochemically assisted jump-to-contact scanning tunneling microscopy (STM) break junction approach to create reproducible and well-defined single-molecule spintronic junctions. The STM break junction is equipped with an external magnetic field either parallel or perpendicular to the electron transport direction. The conductance of Fe-terephthalic acid (TPA)-Fe single-molecule junctions is measured and a giant single-molecule tunneling anisotropic magnetoresistance (T-AMR) up to 53% is observed at room temperature. Theoretical calculations based on first-principles quantum simulations show that the observed AMR of Fe-TPA-Fe junctions originates from electronic coupling at the TPA-Fe interfaces modified by the magnetic orientation of the Fe electrodes with respect to the direction of current flow. The present study highlights new opportunities for obtaining detailed understanding of mechanisms of charge and spin transport in molecular junctions and the role of interfaces in determining the MR of single-molecule junctions.

12.
Chem Soc Rev ; 43(1): 399-411, 2014 Jan 07.
Artigo em Inglês | MEDLINE | ID: mdl-24061231

RESUMO

One important objective of molecular assembly research is to create highly complex functional chemical systems capable of responding, adapting, and evolving. Compared with living systems, the synthetic systems are still rather primitive and are far from realizing those features. Nature is by far the most important source of inspiration for designing and creating such systems. In this critical review, we summarize an alternative approach, inspired by catalysis, to examine and describe some molecular assembly processes. A new term, "catassembly," is suggested to refer to the increase in the rate and control of a molecular assembly process. This term combines the words "catalysis" and "assembly," and identifiably retains the Greek root "cat-" of catalysis. The corresponding verb is "catassemble" and the noun is "catassembler", referring to the "helper" species. Catassembly in molecular assembly is a concept that is analogous to catalysis in chemical synthesis. After using several examples to illustrate the characteristics of catassembly, we discuss future methodological and theoretical developments. We also emphasize the significance of the synergy between chemical synthesis and molecular assembly, especially for hierarchical assembly systems. Because most efforts in the field of molecular assembly have been devoted to the design and synthesis of molecular building blocks, we wish to stress the apparently missing yet critical link to complex chemical systems, i.e., the design and utilization of molecular catassemblers to facilitate the formation of functional molecular assemblies from building blocks with high efficiency and selectivity. This rational control and accelerated method will promote the systems chemistry approach, and may expand the spectrum of molecular assembly from basic science to applications.

13.
Chemphyschem ; 14(10): 2217-24, 2013 Jul 22.
Artigo em Inglês | MEDLINE | ID: mdl-23824871

RESUMO

Herein, we employ Ag@TiO2 core-shell nanoparticles for surface-enhanced Raman scattering (SERS) investigations of TiO2-N719 dye interfaces. In situ electrochemical SERS investigations of the Ag@TiO2-N719 interaction are systematically carried out under a series of electrode-potential controls. By comparing the potential dependence of resonant and pre-resonant SERS spectra recorded with different laser excitations, bidentate carboxylate linkage is considered to be involved in N719 adsorption on TiO2. Meanwhile, SCN ligand shows obvious interactions with TiO2, and their role in the adsorption and orientation of N719 on TiO2 should not be underestimated. The in situ SERS spectra of Ag@TiO2 show a clear bell-shaped intensity-potential relation for the major bands of N719. A molecule-to-TiO2 charge-transfer resonance is tentatively attributed to account for such a phenomenon. Under the influence of such a charge-transfer resonance, valuable information about the N719-TiO2 interaction as well as the intramolecular deformation of N719 is obtained.


Assuntos
Corantes/química , Nanopartículas/química , Compostos Organometálicos/química , Prata/química , Tiocianatos/química , Titânio/química , Ligantes , Tamanho da Partícula , Análise Espectral Raman , Propriedades de Superfície
14.
J Am Chem Soc ; 133(40): 15922-5, 2011 Oct 12.
Artigo em Inglês | MEDLINE | ID: mdl-21899270

RESUMO

We used shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) to systematically study the adsorption of pyridine on low-index Au(hkl) and Pt(hkl) single crystal electrodes. Our gold-core silica-shell nanoparticles (Au@SiO(2) NPs) boost the intensity of Raman scattering from molecules adsorbed on atomically flat surfaces. The average enhancement factor reaches 10(6) for Au(110) and 10(5) for Pt(110), which is comparable to or even greater than that obtained for bare gold NPs (a widely adopted SERS substrate). 3D-FDTD simulations reveal that this large enhancement is due to the transfer of the "hotspots" from NP-NP gaps to NP-surface gaps. We also found that the SHINERS intensity strongly depends on the surface crystallographic orientation, with differences up to a factor of 30. Periodic DFT calculations and theoretical analysis of dielectric functions indicate that this facet-dependence is predominantly governed by the dielectric property of the surface. The results presented in this work may open up new approaches for the characterization of adsorbates and reaction pathways on a wide range of smooth surfaces.

15.
Light Sci Appl ; 10(1): 161, 2021 Aug 04.
Artigo em Inglês | MEDLINE | ID: mdl-34349103

RESUMO

Raman and infrared (IR) spectroscopy are powerful analytical techniques, but have intrinsically low detection sensitivity. There have been three major steps (i) to advance the optical system of the light excitation, collection, and detection since 1920s, (ii) to utilize nanostructure-based surface-enhanced Raman scattering (SERS) and surface-enhanced infrared absorption (SEIRA) since 1990s, and (iii) to rationally couple (i) and (ii) for maximizing the total detection sensitivity since 2010s. After surveying the history of SERS and SEIRA, we outline the principle of plasmonics and the different mechanisms of SERS and SEIRA. We describe various interactions of light with nano/microstructures, localized surface plasmon, surface plasmon polariton, and lightning-rod effect. Their coupling effects can significantly increase the surface sensitivity by designing nanoparticle-nanoparticle and nanoparticle-substrate configuration. As the nano/microstructures have specific optical near-field and far-field behaviors, we focus on how to systematically design the macro-optical systems to maximize the excitation efficiency and detection sensitivity. We enumerate the key optical designs in particular ATR-based operation modes of directional excitation and emission from visible to IR spectral region. We also present some latest advancements on scanning-probe microscopy-based nanoscale spectroscopy. Finally, prospects and further developments of this field are given with emphasis on emerging techniques and methodologies.

16.
Light Sci Appl ; 10(1): 84, 2021 Apr 15.
Artigo em Inglês | MEDLINE | ID: mdl-33859164

RESUMO

Organic-inorganic halide perovskites are emerging materials for photovoltaic applications with certified power conversion efficiencies (PCEs) over 25%. Generally, the microstructures of the perovskite materials are critical to the performances of PCEs. However, the role of the nanometer-sized grain boundaries (GBs) that universally existing in polycrystalline perovskite films could be benign or detrimental to solar cell performance, still remains controversial. Thus, nanometer-resolved quantification of charge carrier distribution to elucidate the role of GBs is highly desirable. Here, we employ correlative infrared-spectroscopic nanoimaging by the scattering-type scanning near-field optical microscopy with 20 nm spatial resolution and Kelvin probe force microscopy to quantify the density of electrons accumulated at the GBs in perovskite polycrystalline thin films. It is found that the electron accumulations are enhanced at the GBs and the electron density is increased from 6 × 1019 cm-3 in the dark to 8 × 1019 cm-3 under 10 min illumination with 532 nm light. Our results reveal that the electron accumulations are enhanced at the GBs especially under light illumination, featuring downward band bending toward the GBs, which would assist in electron-hole separation and thus be benign to the solar cell performance. Correlative infrared-spectroscopic nanoimaging by the scattering-type scanning near-field optical microscopy and Kelvin probe force microscopy quantitatively reveal the accumulated electrons at GBs in perovskite polycrystalline thin films.

17.
Natl Sci Rev ; 7(7): 1228-1238, 2020 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-34692147

RESUMO

Nanostructure-based surface-enhanced infrared absorption (SEIRA) spectroscopy has attracted tremendous interest as an ultrasensitive detection tool that supplies chemical-fingerprint information. The interactions between molecular vibrations and plasmons lead to not only the enhancement of spectral intensity, but also the distortion of spectral Lorentzian lineshapes into asymmetric Fano-type or more complicated lineshapes in the SEIRA spectra; this effect hampers the correct readout of vibrational frequencies and intensities for an accurate interpretation of the measured spectra and quantitative analysis. In this work, we investigate the Fano interference between molecular vibrations and plasmons based on exact electrodynamic simulations and theoretical models. We report that, even if the molecular vibrational energy is equal to the plasmon resonant energy, the molecule-nanostructure distance-dependent dipole-dipole interactions, the plasmon-mediated coherent intermolecular interactions and the decay rates of plasmons have a significant impact on the SEIRA lineshapes. This study paves the way for controllable Fano interference at the nanoscale and more studies on plasmon-dressed molecular electronic or vibrational excited states.

18.
J Phys Chem Lett ; 11(5): 1947-1953, 2020 Mar 05.
Artigo em Inglês | MEDLINE | ID: mdl-32079400

RESUMO

Plasmonic optical antennas (POAs), often constructed from gold or silver nanostructures, can enhance the radiation efficiency of emitters coupled to POAs and are applied in surface-enhanced Raman spectroscopy (SERS) and light-emitting devices. Over the past four decades, radiation enhancement factors (REFs) of POA-emitter systems were considered to be difficult to calculate directly and have been predicted indirectly and approximately, assuming POAs are illuminated by electromagnetic plane waves without emitters. The validity of this approximation remains a significant open problem in SERS theory. Herein, we develop a method based on the rigorous optical reciprocity theorem for accurately calculating the REFs of emitters in nanoparticle-substrate nanogaps for single-molecule SERS and scanning probe-substrate nanogaps for tip-enhanced Raman spectroscopy. We show that the validity of the plane wave approximation breaks down if high-order plasmonic modes are excited. The as-developed method paves the way toward designing high-REF POA nanostructures for luminescence-related devices.

19.
Chem Sci ; 11(5): 1425-1430, 2019 Dec 10.
Artigo em Inglês | MEDLINE | ID: mdl-34123267

RESUMO

In situ electrochemical infrared spectroscopy and Raman spectroscopy are powerful tools for probing potential-dependent adstructures at solid/liquid electrochemical interfaces. However, it is very difficult to quantitatively interpret the observed spectral features including potential-dependent vibrational frequency and spectral intensity, even from model systems such as single-crystal electrode/liquid interfaces. The clear understanding of electrochemical vibrational spectra has remained as a fundamental issue for four decades. Here, we have developed a method to combine computational vibrational spectroscopy tools with interfacial electrochemical models to accurately calculate the infrared and Raman spectra. We found that the solvation model and high precision level in the self-consistent-field convergence are critical elements to realize quantitative spectral predictions. This method's predictive power is verified by analysis of a classic spectroelectrochemical system, saturated CO molecules electro-adsorbed on a Pt(111) electrode. We expect that this method will pave the way to precisely reveal the physicochemical mechanism in some electrochemical processes such as electrocatalytic reactions.

20.
ACS Nano ; 12(11): 11229-11235, 2018 Nov 27.
Artigo em Inglês | MEDLINE | ID: mdl-30335940

RESUMO

One of the promising approaches to meet the urgent demand for further device miniaturization is to create functional devices using single molecules. Although various single-molecule electronic devices have been demonstrated recently, single-molecule optical devices which use external stimulations to control the optical response of a single molecule have rarely been reported. Here, we propose and demonstrate a field-effect Raman scattering (FERS) device with a single molecule, an optical counterpart to field-effect transistors (a key component of modern electronics). With our devices, the gap size between electrodes can be precisely adjusted at subangstrom accuracy to form single molecular junctions as well as to reach the maximum performance of Raman scattering via plasmonic enhancement. Based on this maximum performance, we demonstrated that the intensity of Raman scattering can be further enhanced by an additional ∼40% if the orbitals of the molecules bridged two electrodes were shifted by a gating voltage. This finding not only provides a method to increase the sensitivity of Raman scattering beyond the limit of plasmonic enhancement, but also makes it feasible to realize addressable functional FERS devices with a gate electrode array.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA