Favipiravir (SARS-CoV-2) degradation impurities: Identification and route of degradation mechanism in the finished solid dosage form using LC/LC-MS method.

Favipiravir finished dosage was approved for emergency use in many countries to treat SARS-CoV-2 patients. A specific, accurate, linear, robust, simple, and stability-indicating HPLC method was developed and validated for the determination of degradation impurities present in favipiravir film-coated tablets. The separation of all impurities was achieved from the stationary phase (Inert sustain AQ-C18, 250 × 4.6 mm, 5-µm particle) and mobile phase. Mobile phase A contained KH2 PO4 buffer (pH 2.5 ± 0.05) and acetonitrile in the ratio of 98:2 (v/v), and mobile phase B contained water and acetonitrile in the ratio of 50:50 (v/v). The chromatographic conditions were optimized as follows: flow rate, 0.7 mL/min; UV detection, 210 nm; injection volume, 20 µL; and column temperature, 33°C. The proposed method was validated per the current International Conference on Harmonization Q2 (R1) guidelines. The recovery study and linearity ranges were established from the limit of quantification to 150% optimal concentrations. The method validation results were found to be between 98.6 and 106.2% for recovery and r2  = 0.9995-0.9999 for linearity of all identified impurities. The method precision results were achieved below 5% of relative standard deviation. Forced degradation studies were performed in chemical and physical stress conditions. The compound was sensitive to chemical stress conditions. During the study, the analyte degraded and converted to unknown degradation impurities, and its molecular mass was found using the LC-MS technique and established degradation pathways supported by reaction of mechanism. The developed method was found to be suitable for routine analysis of research and development and quality control.

Unique Quality by Design Approach for Developing HPLC and LC-MS Method for Estimation of Process and Degradation Impurities in Pibrentasvir, Antiviral Agent for Hepatitis C.

Pibrentasvir (PIB) was approved for treating hepatitis C patients. A specific, accurate, linear, robust, and stability-indicating method was developed and validated for determining degradation impurities present in the PIB drug substance by studying the quality by design (QbD) principles. All identified degradation impurities were separated with the stationary phase HALO C18, 150 mm × 4.6 mm, 2.7 µm. Mobile phase A contains pH 2.5 phosphate buffer and acetonitrile in the ratio of (70:30, v/v), and mobile phase B contains water and acetonitrile in the ratio of (30:70, v/v), respectively. The chromatographic conditions were optimized, such as flow rate of 0.8 mL/min, UV detection at 252 nm, injection volume of 20 µL, and column temperature of 40 °C. The proposed method was validated per the current ICH Q2 (R1) guidelines. The recovery study and linearity ranges were established from limit of quantification (LOQ) to 300% optimal concentrations. The method validation results were between 98.6% and 106.2% for recovery, and linearity r 2 was more than 0.999 for all identified impurities. The method precision results achieved below 5% relative standard deviation (RSD). The forced degradation results demonstrated that the drug was sensitive to chemical stress conditions. During the stress study, degrading impurities were identified by the LC-MS technique and the mechanism pathway. A QbD-based experimental design (DoE) approach was used to establish the robustness of the method.

Investigating the usefulness of chitosan based proton exchange membranes tailored with exfoliated molybdenum disulfide nanosheets for clean energy applications.

Chitosan based proton exchange membranes (PEMs) has been synthesized by a facile solution casting strategy using two-dimensional exfoliated molybdenum disulfide (E-MoS2) nanosheets. The prepared PEMs are characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Field-emission scanning electron microscopy (FESEM) with Energy dispersive X-ray spectroscopy (EDX), water uptake, Thermogravimetric analysis (TGA), AC impedance spectroscopy and cyclic voltammetry. In comparison with pure chitosan membrane, E-MoS2 nanosheets incorporated membranes exhibit excellent water absorbing capacity, ion-exchange capacity and proton conductivity. Moreover, the changes in roughness of nanocomposite membranes is investigated by atomic force microscopy (AFM) and the results confirm that the E-MoS2 nanosheets content enhances the surface roughness as well as provide good mechanical and thermal resistivity to the chitosan/E-MoS2 membranes. Chitosan membranes with 0.75% E-MoS2 nanosheets demonstrated higher proton conductivity of 2.92 × 10-3 Scm-1 and membrane selectivity of 8.9 × 104 Scm-3 s with reduced methanol permeability of 3.28 × 10-8 cm2 s-1. Overall, results evidenced that the chitosan/E-MoS2 nanocomposite membranes will be an alternate to Nafion in direct methanol fuel cells (DMFCs).